BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:The local immune microenvironment plays an important regulatory role in the process of bone formation,and the immune system is intricately linked to the skeletal system.OBJECTIVE:To systematically review the promotion of bone regeneration from three aspects:immune cell regulation of microenvironment,regulation of immune response by small extracellular vesicles,and induction of immune response by bone biomaterials,and to elucidate the immune regulatory mechanisms involved in bone regeneration.METHODS:Relevant literature was retrieved from PubMed,CNKI,WanFang Database,and VIP Database,using the search terms of"osteoimmunology,immune microenvironment,small extracellular vesicles,bone regeneration,bone tissue repair,biomaterials,and tissue engineering"in English and Chinese.Repeat and irrelevant literature was screened and removed,and 92 articles that met the criteria were selected for intensive reading and review.RESULTS AND CONCLUSION:Multiple immune cells and bone cells are in the same microenvironment,and immune cells can regulate the differentiation and activity of bone cells,collectively forming an immune microenvironment that affects bone regeneration.Neutrophils can significantly reduce local inflammatory responses in the early stages of bone injury,creating a favorable microenvironment for bone regeneration.M1 macrophages can clear foreign bodies and reduce early inflammatory responses,while M2 macrophages can promote the expression of osteogenic markers and factors,playing an important role in the repair process of bone injury.B cells and T cells can directly or indirectly affect the generation and activity of osteoblasts and osteoclasts,regulate bone metabolism,and promote bone regeneration.Extracellular vesicles of small cells regulate the local immune microenvironment through paracrine secretion,promoting bone formation and angiogenesis at the site of bone injury.The metal ions,surface hydrophilicity,porosity,pore size,surface morphology,and surface roughness on the surface of biomaterials can directly regulate local immune responses,and have anti-inflammatory,angiogenic,and osteogenic effects,thereby accelerating bone regeneration.

To investigate the clinical characteristics and prognosis of extracranial malignant rhabdoid tumor (eMRT) in children, and to provide a reference for the clinical treatment of this disease.

This paper introduces a real-world cohort research model for community-acquired pneumonia （CAP） based on the Jiangsu Traditional Chinese Medicine （TCM） Dominant Diseases Diagnosis and Treatment Data Platform. Firstly， data cleaning is performed by standardizing diagnosis， symptoms， treatment and imaging， intelligently extracting unstructured information， and cleaning and constructing a standardized database. Secondly， for cohort establishment， CAP patients across the province are screened in accordance with CAP diagnostic criteria to build a high-quality disease-specific cohort. Lastly， in terms of protocol design， the characteristics of TCM research and the CAP disease profile are considered to determine appropriate inclusion and exclusion criteria， estimate sample size， define interventions， outcomes and economic evaluations， providing a reference for real-world TCM research on CAP.

This paper introduces a real-world cohort research model for community-acquired pneumonia （CAP） based on the Jiangsu Traditional Chinese Medicine （TCM） Dominant Diseases Diagnosis and Treatment Data Platform. Firstly， data cleaning is performed by standardizing diagnosis， symptoms， treatment and imaging， intelligently extracting unstructured information， and cleaning and constructing a standardized database. Secondly， for cohort establishment， CAP patients across the province are screened in accordance with CAP diagnostic criteria to build a high-quality disease-specific cohort. Lastly， in terms of protocol design， the characteristics of TCM research and the CAP disease profile are considered to determine appropriate inclusion and exclusion criteria， estimate sample size， define interventions， outcomes and economic evaluations， providing a reference for real-world TCM research on CAP.

Objective To preliminary explore the imaging manifestations of digital breast tomosynthesis (DBT) and contrast-enhanced mammography (CEM) in triple-negative breast cancer (TNBC) patients with different levels of human epidermal growth factor receptor 2 (HER2) expression. Methods A retrospective analysis was conducted on TNBC patients who underwent preoperative DBT or CEM examinations at Xinhua Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from January 2018 to December 2019 and Shanghai Second People’s Hospital from January 2022 to May 2025. Clinical data, pathological and immunohistochemical results, and imaging data were collected. Results A total of 69 TNBC patients pathologically confirmed as invasive ductal carcinoma were included, among which 34 underwent DBT and 35 underwent CEM. Among these patients, 34 (49.28%) had HER2-low expression and 35 (50.72%) had HER2-zero expression. DBT results showed that the proportion of spiculation signs in HER2-low group (n＝14) was significantly higher than that in HER2-zero group (n＝20; P＝0.009, P_adj＝0.045). However, there were no significant differences in breast density type, mass shape, or calcification between the two groups. CEM results showed that on low-energy images, the proportion of spiculation signs in the HER2-low group (n＝20) was higher than that in the HER2-zero group (n＝15; P＝0.011, P_adj＝0.077). Results of CEM showed that on reconstructed images, differences in background parenchymal enhancement and mass enhancement patterns between the two groups were not statistically significant; in both groups, heterogeneous enhancement was the most common, followed by homogeneous enhancement, with ring enhancement being the least common. Conclusions TNBC with low HER2 expression and TNBC with zero HER2 expression may have potential differences in the presentation of spiculation signs on DBT. However, the correlation between CEM manifestations and TNBC with different HER2 expression levels requires further research.

BACKGROUND:The local immune microenvironment plays an important regulatory role in the process of bone formation,and the immune system is intricately linked to the skeletal system.OBJECTIVE:To systematically review the promotion of bone regeneration from three aspects:immune cell regulation of microenvironment,regulation of immune response by small extracellular vesicles,and induction of immune response by bone biomaterials,and to elucidate the immune regulatory mechanisms involved in bone regeneration.METHODS:Relevant literature was retrieved from PubMed,CNKI,WanFang Database,and VIP Database,using the search terms of"osteoimmunology,immune microenvironment,small extracellular vesicles,bone regeneration,bone tissue repair,biomaterials,and tissue engineering"in English and Chinese.Repeat and irrelevant literature was screened and removed,and 92 articles that met the criteria were selected for intensive reading and review.RESULTS AND CONCLUSION:Multiple immune cells and bone cells are in the same microenvironment,and immune cells can regulate the differentiation and activity of bone cells,collectively forming an immune microenvironment that affects bone regeneration.Neutrophils can significantly reduce local inflammatory responses in the early stages of bone injury,creating a favorable microenvironment for bone regeneration.M1 macrophages can clear foreign bodies and reduce early inflammatory responses,while M2 macrophages can promote the expression of osteogenic markers and factors,playing an important role in the repair process of bone injury.B cells and T cells can directly or indirectly affect the generation and activity of osteoblasts and osteoclasts,regulate bone metabolism,and promote bone regeneration.Extracellular vesicles of small cells regulate the local immune microenvironment through paracrine secretion,promoting bone formation and angiogenesis at the site of bone injury.The metal ions,surface hydrophilicity,porosity,pore size,surface morphology,and surface roughness on the surface of biomaterials can directly regulate local immune responses,and have anti-inflammatory,angiogenic,and osteogenic effects,thereby accelerating bone regeneration.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

Objective To observe the value of deep learning(DL)reconstruction algorithm for improving imaging quality of accelerated T2WI of cervical tumors.Methods A total of 43 patients with suspected cervical tumors were prospectively enrolled.Cervical conventional T2WI and accelerated T2WI based on DL reconstruction(DL-T2WI)were acquired.The imaging quality was subjectively assessed by 2 physicians using a 4-point system,including overall image quality,artifact,noise,sharpness and lesion detectability scores,and then were compared between conventional T2WI and DL-T2WI.Results The acquisition of conventional T2WI took 116 s,while of DL-T2WI took 101 s.The inter-observer consistency of subjective evaluation results on the overall image quality,artifact,noise,sharpness and lesion detectability scores were all excellent(Kappa=0.851-0.969).No significant difference of subjective evaluation results on overall image quality nor lesion detectability scores was found between conventional T 2WI and DL-T2WI(both P＞0.05),while the artifact and sharpness scores of DL-T2WI were significantly higher but the noise score was significantly lower than those of conventional T2WI(all P＜0.05).Conclusion DL reconstruction algorithm was helpful for improving imaging quality of accelerated T 2WI of cervical tumors.

Panax ginseng, a perennial herbaceous plant and a representative of the Panax genus, is renowned for its exceptional medicinal value and economic benefits, often referred to as the “King of Herbs.” With the increasing market demand and the limited availability of suitable cultivation land, the issue of continuous cropping obstacles for P. ginseng has become increasingly prominent, directly hindering the sustainable development of the ginseng industry. This article summarizes the concept and hazards of continuous cropping obstacles and, drawing on the latest research, provides an in-depth analysis of the causes and response mechanisms. This work aims to establish a solid foundation for future research into the mechanisms of continuous cropping obstacles in P. ginseng.