BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BackgroundPatients with depressive episode and schizophrenia have a high risk of suicide. The sleep electroencephalogram power spectral density characteristics of patients with depressive episode accompanied by suicidal behavior and those with schizophrenia may be different， but there is currently a lack of direct comparative studies on these two groups of patients. ObjectiveTo compare the sleep electroencephalogram power spectral density between depressive episode and schizophrenic patients with suicidal behavior， in order to provide references for exploring predictive indicators of suicidal behavior. MethodsFrom June 2018 to December 2020， 20 patients with depressive episode and 20 patients with schizophrenia who had committed suicide within the past month and were treated at the outpatient department of Shenzhen Kangning Hospital were selected. All of them met the diagnostic criteria for depressive episode or schizophrenia as defined in the International Classification of Diseases， tenth edition （ICD-10）. Using a random sampling method， 20 volunteers with matching gender and age to the patient groups were selected from the Cuiping community in Shenzhen as the control group. The subjective sleep of the patients was evaluated using the Insomnia Severity Index （ISI）， the Dysfunctional Belief and Attitude about Sleep （DBAS）， the Disturbing Dreams and Nightmare Severity Index （DDNSI）， and the Epworth Somnolence Scale （ESS）. The objective sleep of the patients was assessed using polysomnography. The sleep electroencephalogram was filtered and the power spectral density of the brain wave was analyzed and processed for all the subjects. The subjective and objective sleep conditions of the two patient groups were compared， and the sleep electroencephalogram power spectral density of the patient groups and the control group were also compared. ResultsA comparison of subjective and objective sleep conditions between patients with depressive episode accompanied by suicidal behavior and patients with schizophrenia accompanied by suicidal behavior showed no statistically significant differences （P>0.05）. Comparisons of sleep electroencephalogram power spectral density in the W stage （average power of α wave， total power of δ wave， average power of δ wave， average power of θ wave）， N1 stage （average power of β wave， total power of α wave， total power of δ wave）， N2 stage （total power of α wave， average power of α wave， total power of δ wave， average power of δ wave）， N3 stage （average power of α wave， average power of δ wave）， and R stage （total power of α wave， average power of α wave， total power of δ wave， average power of δ wave） between patients with depressive episode accompanied by suicidal behavior， patients with schizophrenia accompanied by suicidal behavior， and the control group showed statistically significant differences （P<0.05 or 0.01）. The total power of δ wave in the W stage and the average power of β wave and δ wave in the N1 stage were higher in two patient groups were higher than those of the control group. The total power of α wave and the average power of α wave in the N2 stage were lower than those of the control group， while the average power of δ wave was higher than that of the control group. The average power of α wave in the N3 stage of both patient groups were lower than that of the control group， while the average power of δ wave was higher than that of the control group. The total power and average power of α wave in the R stage were lower than those of the control group， while the total power and average power of δ wave were higher than those of the control group. All the differences were statistically significant. Patients with depressive episode accompanied by suicidal behavior had higher average powers of α wave， δ wave， and θ wave in the W stage compared with the control group， while the total power of α wave in the N1 stage was lower in the former group. All these differences were statistically significant （P<0.05）. ConclusionThe depressive episode patients accompanied by suicidal behavior have highly overlapping sleep electroencephalogram abnormal patterns with those of schizophrenia patients， mainly manifested as a general decrease in α wave power （N2， N3， R stage） and a general increase in δ wave power （W， N1， N2， N3， R stage） as well as β wave power in N1 stage. At the same time， patients with depressive episode accompanied by suicidal behavior also show specific changes， including an increase in the average power of α and θ waves during the wakefulness period （W stage）， and a decrease in the total power of α wave in N1 stage. ［Funded by Guangdong Province High-level Clinical Key Specialty （with supporting funds from Shenzhen City） （number， SZGSP013）； Shenzhen Key Medical Discipline （number， SZXK041）； Shenzhen Clinical Medicine Research Center Project （number， 20210617155253001）］

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

Background: Adrenocortical hormones, particularly 11-oxygenated androgens, are pivotal in female reproductive health and fertility. Standardized detection kits and population-specific reference intervals are lacking in China, hindering related clinical applications. Methods: A HPLC-tandem mass spectrometry (HPLC-MS/MS) pipeline was developed, rigorously validated, and applied to simultaneously quantify corticosterone, cortisone, cortisol, 18-OH cortisol, androstenedione (A4), 11β-hydroxyandrostenedione (11-OH A4), dehydroepiandrosterone, and dehydroepiandrosterone sulfate in serum samples from 455 reproductive-aged women (18–45 yrs) in Guangxi, China. Age-dependent concentration trends were analyzed, and reference intervals stratified by age (2.5th to 97.5th percentiles) were established. Correlations with body-composition metrics, ethnicity, and the menstrual cycle were investigated. Results: The HPLC-MS/MS method demonstrated high precision (intra- and inter-assay CVs < 15%), accuracy, and sensitivity. All eight hormones exhibited significant age-related declines (P < 0.001 for seven hormones; P = 0.001 for 11-OH A4). Notably, 11-OH A4 levels were significantly lower in the 35–45-yr (3.05 nmol/L) and 25–34-yr (3.09 nmol/L) age groups than in the 18–24-yr (3.57 nmol/L) age group, whereas no significant difference was observed between the 35–45-yr and 25–34-yr age groups. Weak negative correlations were observed between the body mass index and corticosterone and cortisone levels, whereas ethnicity and the menstrual cycle showed no significant associations with hormone levels. Conclusions We developed an HPLC-MS/MS-based method for simultaneously quantifying eight adrenocortical hormones, including 11-OH A4, and defined age-specific reference intervals for reproductive-aged Chinese women. These findings advance the clinical utility of adrenocortical hormones in diagnosing and managing reproductive disorders.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

Background: s/Aims: Non-invasive models stratifying clinically significant portal hypertension (CSPH) are limited. Herein, we developed a new non-invasive model for predicting CSPH in patients with compensated cirrhosis and investigated whether carvedilol can prevent hepatic decompensation in patients with high-risk CSPH stratified using the new model. Methods: Non-invasive risk factors of CSPH were identified via systematic review and meta-analysis of studies involving patients with hepatic venous pressure gradient (HVPG). A new non-invasive model was validated for various performance aspects in three cohorts, i.e., a multicenter HVPG cohort, a follow-up cohort, and a carvediloltreating cohort. Results: In the meta-analysis with six studies (n=819), liver stiffness measurement and platelet count were identified as independent risk factors for CSPH and were used to develop the new “CSPH risk” model. In the HVPG cohort (n=151), the new model accurately predicted CSPH with cutoff values of 0 and –0.68 for ruling in and out CSPH, respectively. In the follow-up cohort (n=1,102), the cumulative incidences of decompensation events significantly differed using the cutoff values of <–0.68 (low-risk), –0.68 to 0 (medium-risk), and >0 (high-risk). In the carvediloltreated cohort, patients with high-risk CSPH treated with carvedilol (n=81) had lower rates of decompensation events than non-selective beta-blockers untreated patients with high-risk CSPH (n=613 before propensity score matching [PSM], n=162 after PSM). Conclusions Treatment with carvedilol significantly reduces the risk of hepatic decompensation in patients with high-risk CSPH stratified by the new model.

Objective To investigate the effect of Porphyromonas gingivalis(P.gingivalis)on Th17/Treg imbalance and vascular endothelial function in ApoE-/-mice.Methods Eight-week-old ApoE-/-mice were inoculated orally with P.gingivalis every other day and received high-fat diet for 8 weeks.The alveolar bone loss was assessed by Micro-CT and the oral microflora of mice was analyzed by 16S rRNA sequencing technology.HE staining and oil red O staining were used to detect plaque formation in ApoE-/-mice.The total cholesterol(TC),triglyceride(TG),low-density lipoprotein cholesterol(LDL-C)and high-density lipoprotein cholesterol(HDL-C)levels of mice were detected by biochemical detection technology.Real-time quantitative PCR(qRT-PCR)and immunohistochemistry(IHC)were used to detect the indicators of endothelial injury in the model aortic plaques,including vascular cell adhesion molecule(VCAM),intercellular adhesion molecule(ICAM),matrix metallopeptidase(MMP)-2 and MMP-9.The relative proportions of Th17 and Treg in aortic plaque and spleen were detected by IHC,qRT-PCR and flow cytometry,including interleukin-17(IL-17),retinoic acid related orphan receptor γt(RORγt)and forkhead box P3(Foxp3).Results In ApoE-/-mice infected with P.gingivalis,the severity of alveolar bone loss was increased(P＜0.01);the diversity of oral microbiota was decreased(P＜0.05),and the composition of oral microbiota was changed.The proportion of atherosclerotic plaque area was increased(P＜0.01),paralleled by elevated serum levels of TG,TC and LDL-C(P＜0.05),alongside a significant de-crease in HDL-C(P＜0.01).Aortic plaques exhibited upregulated protein expression of VCAM and ICAM as well as heightened mRNA levels of ICAM,VCAM,MMP-2 and MMP-9(P＜0.05).The levels of IL-17 related protein and RORγt transcriptional activity in aortic plaque were increased(P＜0.01),while the levels of Foxp3 related protein and gene were decreased(P＜0.01).The ratio of Th17/Treg cells in spleen was imbalanced(P＜0.05).Conclusion Periodontitis caused by the imbalance of the oral flora of ApoE-/-mice induced by P.gingivalis can cause Th17/Treg imbalance in aortic plaque and exacerbate the endothelial dysfunction during ather-osclerosis.

Objective To explore the impact of suture configuration and fixation type on the biome-chanical strength of rotator cuff repair,using a factorial design study.Methods Sixteen fresh-frozen porcine shoulder samples were randomized into an anchorless double-row suture bridge transosseous su-tures(DS)group,an anchored double-row suture bridge transosseous-equivalent(DE)group,an an-chorless X-BOX construct transosseous sutures(XS)group,and an anchored X-BOX construct transos-seous-equivalent(XE)group,each of four,according to suture configuration(double-row suture bridge,traditional X-BOX construct)and fixation type(suture anchors,transosseous sutures).Then,their fatigue resistance(first-cycle excursion,gap length difference ratio,and the percentage of ex-posed footprints)and the failure strength(the maximum failure load and the re-tear type)were mea-sured using a biomechanical material testing machine.Results Different suture configurations affected failure strength(F=39.559,P<0.001),with the double-row suture bridge groups(693.07±58.35 N,746.76±138.57 N)showing significantly higher failure strength,compared to the traditional X-BOX groups(462.90±18.91 N,421.43±90.76 N).However,the fixation type did not significantly im-pact failure strength(F=1.161,P=0.302).Moreover,the suture configuration influenced the gap differ-ence ratio(F=7.781,P=0.016),but had no significant correlation with other fatigue resistance indica-tors(P>0.05).Meanwhile,failure strength and fatigue resistance were not correlated with fixation type,and the interaction between suture and fixation type(P>0.05).The incidence of failure types for the four suture configurations was as follows:Type I tendon tear:XS>XE>DS=DE;type II tendon tear:DS>XE>XS=DE;fixing material-related failure:DE>DS=XE=XS.Conclusion The failure strength and gap formation ratio in rotator cuff repair under fatigue loading are influenced by suture configuration,whereas no significant association has been observed with respect to fixation method,whether using transosseous sutures or suture anchors.

Objective To examine the changing prevalence and antimicrobial resistance profiles of Burkholderia cepacia in 52 hospitals across China from 2015 to 2021.Methods A total of 9 261 strains of B.cepacia were collected from 52 hospitals between January 1,2015 and December 31,2021.Antimicrobial susceptibility of the strains was tested using Kirby-Bauer method or automated antimicrobial susceptibility testing systems according to a unified protocol.The results were interpreted according to the breakpoints released in the Clinical & Laboratory Standards Institute(CLSI)guidelines(2023 edition).Results A total of 9 261 strains of B.cepacia were isolated from all age groups,especially elderly patients.The proportion was 11.1％(1 032 strains)in children,significantly lower than the proportion in adults.About half(46.5％,4 310/9 261)of the strains were isolated from patients at least 60 years old and 42.3％(3 919/9 261)of the strains were isolated from young adults.Most isolates(71.1％)were isolated from sputum and respiratory secretions,followed by urine(10.7％)and blood samples(8.1％).B.cepacia isolates were highly susceptible to the five antimicrobial agents recommended in the CLSI M100 document(33rd edition,2023).B.cepacia isolates showed relatively higher resistance rates to meropenem and levofloxacin.However,the resistance rates to ceftazidime,trimethoprim-sulfamethoxazole,and minocycline remained below 8.1％.The percentage of B.cepacia strains resistant to levofloxacin was the highest compared to other antibiotics in any of the three age groups(from 12.4％in the patients＜18 years old to 20.6％in the patients aged 60 years or older).Conclusions B.cepacia is one of the clinically important non-fermenting gram-negative bacteria.Accurate and timely reporting of antimicrobial susceptibility test results and ongoing antimicrobial resistance surveillance are helpful for rational prescription of antimicrobial agents and proper prevention and control of nosocomial infections.

Objective To evaluate the application of high-resolution magnetic resonance vessel wall imaging(HRMR-VWI)in identifying high-risk features of intracranial atherosclerotic plaques,and to analyze the correlation between plaque characteristics and stroke recurrence under varying degrees of stenosis.Methods The data from 368 patients with intracranial atherosclerotic stenosis(ICAS)across two centers were retrospectively analyzed.Based on the degree of stenosis,all patients were categorized into mild-to-moderate stenosis group(luminal stenosis<70%,n=155)and severe stenosis group(luminal stenosis≥70%,n=213).HRMR-VWI images and clinical information of the patients were collected and analyzed,and the culprit plaques were quantitatively analyzed.Univariate and multivariate logistic regression analyses were employed to identify the risk factors for stroke recurrence,and the predictive performance was evaluated using the area under the curve(AUC)of the receiver operating characteristic(ROC)curve.Results Higher normalized wall index(NWI)[odds ratio(OR)=1.082,95%confidence interval(CI)1.050-1.118,P<0.05]and the presence of intraplaque hemorrhage(IPH)(OR=1.843,95%CI 1.120-3.036,P<0.05)were risk factors for stroke recurrence in all patients.And these two factors were also significant in the mild-to-moderate stenosis group(NWI:OR=1.088,95%CI 1.009-1.186,P<0.05;IPH:OR=4.049,95%CI 1.227-16.065,P<0.05).A predictive model for stroke recurrence was constructed using the combination of IPH and NWI,with the best performance in the mild-to-moderate stenosis group(AUC=0.813,95%CI 0.723-0.906).Conclusion In patients with luminal stenosis<70%,the increase of NWI and the presence of IPH have been validated as significant and effective indicators for predicting stroke recurrence,demonstrating notable predictive performance.In contrast,among patients with luminal stenosis≥70%,the utility of plaque characteristics in predicting stroke recurrence is relatively lower,indicating that the correlation between plaque characteristics and stroke recurrence varies across different degrees of stenosis.