ObjectiveTo investigate the impact of melanoma-associated antigen D4 （MAGED4） on the malignant biological behavior of hepatocellular carcinoma （HCC）， providing experimental evidence for its evaluation as a potential therapeutic target in HCC. MethodsGenes positively correlated with MAGED4 expression in HCC were screened using the LinkedOmics database， followed by GO functional and KEGG pathway enrichment analyses. Endogenously low-expressing SMMC-7721 and Huh7 cells were selected， with normal hepatic LO2 cells serving as controls. Stable overexpression cell lines were established via lentiviral infection （MAGED4 overexpression group）， with RT-PCR and Western blot validating overexpression efficiency. The effects of MAGED4 overexpression on cell proliferation， cell cycle distribution， migration， and adhesion were systematically analyzed using CCK-8 assays， flow cytometry， scratch healing assays， Transwell migration assays， and cell adhesion assays. ResultsBioinformatics analysis indicated that MAGED4 co-expressed genes were significantly enriched in biological processes closely associated with tumor proliferation and metastasis， including cell-cell adhesion， extracellular matrix organization， and the PI3K-Akt signaling pathway. A stable MAGED4 overexpression cell model was successfully established. In vitro functional assays demonstrated that MAGED4-overexpressing SMMC-7721 and Huh7 cells exhibited a mesenchymal-like morphology， whereas LO2 cells maintained an epithelial-like morphology. Compared with the empty-virus control groups， the MAGED4-overexpressing groups showed significantly increased proliferative activity （48 h： t=3.887， 22.070， 8.866， all P<0.05； 72 h： t=3.231， 23.840， 9.848， all P<0.05； 96 h： t=5.123， 49.800， 5.909， P<0.05， P<0.01， P<0.05）， wound healing rates （12 h： F=40.90， 44.00， 200.50， all P<0.001； 24 h： F=112.00， 34.89， 249.20， all P<0.001）， and numbers of migrated cells （F=239.20， 59.79， 132.80， all P<0.001）， along with significantly decreased numbers of adherent cells （F=73.65， 85.91， 138.00， all P<0.001）， while no significant differences were observed in cell cycle phase distribution in all three cell lines. ConclusionMAGED4 enhances proliferation and migration while suppressing adhesion in both HCC and normal hepatocytes， however， induces mesenchymal-like morphological changes exclusively in HCC cells， suggesting that MAGED4 is capable of driving HCC progression and may serve as a potential therapeutic target for HCC.

OBJECTIVE: We aimed to investigate the patterns of fasting blood glucose (FBG) trajectories and analyze the relationship between various occupational hazard factors and FBG trajectories in male steelworkers. METHODS: The study cohort included 3,728 workers who met the selection criteria for the Tanggang Occupational Cohort (TGOC) between 2017 and 2022. A group-based trajectory model was used to identify the FBG trajectories. Environmental risk scores (ERS) were constructed using regression coefficients from the occupational hazard model as weights. Univariate and multivariate logistic regression analyses were performed to explore the effects of occupational hazard factors using the ERS on FBG trajectories. RESULTS: FBG trajectories were categorized into three groups. An association was observed between high temperature, noise exposure, and FBG trajectory ( P < 0.05). Using the first quartile group of ERS1 as a reference, the fourth quartile group of ERS1 had an increased risk of medium and high FBG by 1.90 and 2.21 times, respectively (odds ratio [ OR] = 1.90, 95% confidence interval [ CI]: 1.17-3.10; OR = 2.21, 95% CI: 1.09-4.45). CONCLUSION An association was observed between occupational hazards based on ERS and FBG trajectories. The risk of FBG trajectory levels increase with an increase in ERS.
Humans ; Male ; Adult ; Blood Glucose/analysis* ; China ; Prospective Studies ; Occupational Exposure/adverse effects* ; Risk Factors ; Middle Aged ; Steel ; Fasting/blood* ; Metal Workers ; East Asian People

Objective:To evaluate the efficacy of 3D printing technology combined with computer navigation-assisted screw implantation in the treatment of atlantoaxial instability (AAI) complicated by vertebral artery anomalies.Methods:A retrospective case series study was conducted to analyze the clinical data of 23 patients with AAI complicated by vertebral artery anomalies who were admitted to Honghui Hospital of Xi′an Jiaotong University between January 2019 and January 2023, including 10 males and 13 females, aged 19-70 years [(51.0±13.3)years]. Vertebral artery anomalies were categorized into unilateral high-riding vertebral artery with unilateral dominance ( n=14), bilateral high-riding vertebral arteries with unilateral dominance ( n=6), and ponticulus posticus ( n=3). All the patients underwent preoperative planning using a 3D-printed model of the atlantoaxial complex with the vertebral artery, followed by posterior atlantoaxial pedicle screw fixation with computer-assisted navigation. Operative duration and intraoperative blood loss were recorded. The accuracy of pedicle screw placement was assessed at 3 days postoperatively using the Gertzbein-Robbins classification. Visual analogue scale (VAS) scores and Japanese Orthopedic Association (JOA) scores were evaluated preoperatively, at 3 days, 3 months postoperatively, and at the last follow-up. Bony fusion was assessed using cervical CT with 3D reconstruction at the last follow-up. Complications were also observed. Results:All the patients were followed up for 12-19 months [(15.1±1.9)months]. The operative duration was 125-167 minutes [(140.6±10.9)minutes] and intraoperative blood loss was 200-600 ml [(295.7±77.8)ml]. At 3 days postoperatively, all the 66 pedicle screws were safely placed, with 60 screws (91%) rated as Gertzbein-Robbins Grade 0 and 6 screws (9%) as Grade 1. At 3 days and 3 months postoperatively, and at the last follow-up, the VAS scores were (4.0±1.0)points, (2.0±0.6)points, and (1.3±0.5)points, and the JOA scores were (14.2±1.2)points, (16.0±0.8)points, and (16.6±0.5)points, both of which were not only significantly improved compared with preoperative (5.6±1.3)points and (12.8±1.5)points, but also further improved over time ( P<0.05). At the last follow-up, 22 patients (96%) achieved satisfactory atlantoaxial bony fusion. No vertebral artery injury, spinal cord or nerve injury, cerebrospinal fluid leakage, or screw loosening were observed in any patients. Conclusion:For patients with AAI complicated by vertebral artery anomalies, 3D printing combined with computer navigation-assisted navigation for atlantoaxial pedicle screw implantation offers multiple advantages, including minimal surgical trauma, high screw placement accuracy, pain relief, neurological function improvement, high fusion rate, and lowered incidence of complications.

BACKGROUND: The clinical impact of post-percutaneous coronary intervention (PCI) quantitative flow ratio (QFR) in patients treated with PCI for chronic total occlusion (CTO) was still undetermined. METHODS: All CTO vessels treated with successful anatomical PCI in patients from PANDA III trial were retrospectively measured for post-PCI QFR. The primary outcome was 2-year vessel-oriented composite endpoints (VOCEs, composite of target vessel-related cardiac death, target vessel-related myocardial infarction, and ischemia-driven target vessel revascularization). Receiver operator characteristic curve analysis was conducted to identify optimal cutoff value of post-PCI QFR for predicting the 2-year VOCEs, and all vessels were stratified by this optimal cutoff value. Cox proportional hazards models were employed to calculate the hazard ratio (HR) with 95% CI. RESULTS: Among 428 CTO vessels treated with PCI, 353 vessels (82.5%) were analyzable for post-PCI QFR. 31 VOCEs (8.7%) occurred at 2 years. Mean value of post-PCI QFR was 0.92 ± 0.13. Receiver operator characteristic curve analysis shown the optimal cutoff value of post-PCI QFR for predicting 2-year VOCEs was 0.91. The incidence of 2-year VOCEs in the vessel with post-PCI QFR < 0.91 (n = 91) was significantly higher compared with the vessels with post-PCI QFR ≥ 0.91 (n = 262) (22.0% vs. 4.2%, HR = 4.98, 95% CI: 2.32-10.70). CONCLUSIONS Higher post-PCI QFR values were associated with improved prognosis in the PCI practice for coronary CTO. Achieving functionally optimal PCI results (post-PCI QFR value ≥ 0.91) tends to get better prognosis for patients with CTO lesions.

For middle-aged and elderly patients with conditions such as spinal fractures and degenerative spinal diseases, spinal internal fixation is a core surgical procedure for reconstructing spinal stability, heavily relying on the biomechanical stability provided by pedicle screw systems. Whereas, these patients are often complicated by osteoporosis that can significantly compromise the stability of the bone-pedicle screw interface, leading to a marked increase in pedicle screw loosening and surgical failure rates. The bone cement-augmented pedicle screw technique, which involves injecting bone cement into the vertebral body or screw trajectory to optimize the mechanical properties of the bone-pedicle screw composite, has been proven to significantly enhance fixation strength and effectively prevent screw-related failures, thereby reducing the incidence of internal fixation failure in high-risk populations undergoing spinal fusion. However, the widespread clinical application of this technique has faced challenges such as inaccurate clinical decision-making (indication and contraindication selection), non-standardized operative practices, and insufficient awareness of complication prevention, resulting in considerable variability in clinical outcomes and even severe complications. To address this, Prof. Luo Fei from First Affiliated Hospital of Army Medical University initiated the project and the Chinese Association Orthopaedic Surgeons organized relevant experts to develop the Evidence-based clinical practice guideline for bone cement-augmented pedicle screw technique ( version 2025), based on current evidence. The guidelines put forward 8 recommendations regarding the clinical value, scope of application, and operational standards of the technique, aiming to provide evidence-based medical support and technical standardization for clinical decision-making.

Objective:This study aimed to explore the molecular mechanisms of the maladaptation of H3N2 influenza virus in chicken embryos, provide a theoretical basis for the restoration of H3N2 influenza vaccine production in chicken embryos.Methods:Samples of respiratory secretions from patients with influenza-like symptoms (Influenza-like Illness, ILI) caused by H3N2 influenza virus were inoculated into chicken embryos and Madin-Darby Canine Kidney cells (MDCK), respectively. After isolating the virus, hemagglutination experiments were conducted to detect hemagglutination titers and hemagglutination inhibition experiments were used to compare antigenic differences; further, whole-genome sequencing of H3N2 influenza virus was performed using second-generation high-throughput gene sequencing (Next Generation High-Throughput Gene Sequencing, NGS), and key amino acid sites of mutations were identified through sequence alignment; combined with sialic acid receptor binding experiments, the differences in the binding of wild-type and mutant receptor binding sites (RBS) to sialic acid receptors were compared; finally, molecular docking and molecular dynamics simulation method were used to explore the specific molecular mechanisms of how mutation sites affect the differences in the affinity of the RBS pocket for sialic acid receptors.Results:The hemagglutination assay result indicated that both chicken embryos and MDCK cells could isolate the influenza virus, and the hemagglutination inhibition test showed that no antigenic differences were produced in the isolated strains. NGS analysis revealed that the H3N2 virus underwent an F195Y mutation in the (RBS) region of the hemagglutinin (HA) protein after adaptation through chicken embryo passages. Receptor-binding experiments demonstrated that the F195Y mutation enhanced the virus′s binding ability to α2, 3-linked sialic acid glycan (Neu5Acα2-3Galβ1-4GlcNAcβ-PAA, 3′SLN), while the mutation did not affect the affinity of the RBS pocket for α2, 6-linked sialic acid glycan (Neu5Acα2-6Galβ1-4GlcNAcβ-PAA, 6′SLN). Molecular docking and molecular dynamics simulation result indicate that the F195Y mutation, by replacing a hydrophobic amino acid with a hydrophilic one, leads to a significant decrease in the structure of the RBS pocket, enhancing the binding stability of the H3N2 influenza virus with α2, 3-sln. This is specifically manifested by an increase in binding time and an increase in the number of hydrogen bonds at the RBS site with the receptor. Furthermore, the F195Y mutation does not alter the binding of the virus to other receptors.Conclusions:The F195Y mutation in the RBS pocket of H3N2 influenza virus is a key site affecting the viral chicken embryo inadaptability.

Objective:To evaluate the efficacy of 3D printing technology combined with computer navigation-assisted screw implantation in the treatment of atlantoaxial instability (AAI) complicated by vertebral artery anomalies.Methods:A retrospective case series study was conducted to analyze the clinical data of 23 patients with AAI complicated by vertebral artery anomalies who were admitted to Honghui Hospital of Xi′an Jiaotong University between January 2019 and January 2023, including 10 males and 13 females, aged 19-70 years [(51.0±13.3)years]. Vertebral artery anomalies were categorized into unilateral high-riding vertebral artery with unilateral dominance ( n=14), bilateral high-riding vertebral arteries with unilateral dominance ( n=6), and ponticulus posticus ( n=3). All the patients underwent preoperative planning using a 3D-printed model of the atlantoaxial complex with the vertebral artery, followed by posterior atlantoaxial pedicle screw fixation with computer-assisted navigation. Operative duration and intraoperative blood loss were recorded. The accuracy of pedicle screw placement was assessed at 3 days postoperatively using the Gertzbein-Robbins classification. Visual analogue scale (VAS) scores and Japanese Orthopedic Association (JOA) scores were evaluated preoperatively, at 3 days, 3 months postoperatively, and at the last follow-up. Bony fusion was assessed using cervical CT with 3D reconstruction at the last follow-up. Complications were also observed. Results:All the patients were followed up for 12-19 months [(15.1±1.9)months]. The operative duration was 125-167 minutes [(140.6±10.9)minutes] and intraoperative blood loss was 200-600 ml [(295.7±77.8)ml]. At 3 days postoperatively, all the 66 pedicle screws were safely placed, with 60 screws (91%) rated as Gertzbein-Robbins Grade 0 and 6 screws (9%) as Grade 1. At 3 days and 3 months postoperatively, and at the last follow-up, the VAS scores were (4.0±1.0)points, (2.0±0.6)points, and (1.3±0.5)points, and the JOA scores were (14.2±1.2)points, (16.0±0.8)points, and (16.6±0.5)points, both of which were not only significantly improved compared with preoperative (5.6±1.3)points and (12.8±1.5)points, but also further improved over time ( P<0.05). At the last follow-up, 22 patients (96%) achieved satisfactory atlantoaxial bony fusion. No vertebral artery injury, spinal cord or nerve injury, cerebrospinal fluid leakage, or screw loosening were observed in any patients. Conclusion:For patients with AAI complicated by vertebral artery anomalies, 3D printing combined with computer navigation-assisted navigation for atlantoaxial pedicle screw implantation offers multiple advantages, including minimal surgical trauma, high screw placement accuracy, pain relief, neurological function improvement, high fusion rate, and lowered incidence of complications.

For middle-aged and elderly patients with conditions such as spinal fractures and degenerative spinal diseases, spinal internal fixation is a core surgical procedure for reconstructing spinal stability, heavily relying on the biomechanical stability provided by pedicle screw systems. Whereas, these patients are often complicated by osteoporosis that can significantly compromise the stability of the bone-pedicle screw interface, leading to a marked increase in pedicle screw loosening and surgical failure rates. The bone cement-augmented pedicle screw technique, which involves injecting bone cement into the vertebral body or screw trajectory to optimize the mechanical properties of the bone-pedicle screw composite, has been proven to significantly enhance fixation strength and effectively prevent screw-related failures, thereby reducing the incidence of internal fixation failure in high-risk populations undergoing spinal fusion. However, the widespread clinical application of this technique has faced challenges such as inaccurate clinical decision-making (indication and contraindication selection), non-standardized operative practices, and insufficient awareness of complication prevention, resulting in considerable variability in clinical outcomes and even severe complications. To address this, Prof. Luo Fei from First Affiliated Hospital of Army Medical University initiated the project and the Chinese Association Orthopaedic Surgeons organized relevant experts to develop the Evidence-based clinical practice guideline for bone cement-augmented pedicle screw technique ( version 2025), based on current evidence. The guidelines put forward 8 recommendations regarding the clinical value, scope of application, and operational standards of the technique, aiming to provide evidence-based medical support and technical standardization for clinical decision-making.

Objective:This study aimed to explore the molecular mechanisms of the maladaptation of H3N2 influenza virus in chicken embryos, provide a theoretical basis for the restoration of H3N2 influenza vaccine production in chicken embryos.Methods:Samples of respiratory secretions from patients with influenza-like symptoms (Influenza-like Illness, ILI) caused by H3N2 influenza virus were inoculated into chicken embryos and Madin-Darby Canine Kidney cells (MDCK), respectively. After isolating the virus, hemagglutination experiments were conducted to detect hemagglutination titers and hemagglutination inhibition experiments were used to compare antigenic differences; further, whole-genome sequencing of H3N2 influenza virus was performed using second-generation high-throughput gene sequencing (Next Generation High-Throughput Gene Sequencing, NGS), and key amino acid sites of mutations were identified through sequence alignment; combined with sialic acid receptor binding experiments, the differences in the binding of wild-type and mutant receptor binding sites (RBS) to sialic acid receptors were compared; finally, molecular docking and molecular dynamics simulation method were used to explore the specific molecular mechanisms of how mutation sites affect the differences in the affinity of the RBS pocket for sialic acid receptors.Results:The hemagglutination assay result indicated that both chicken embryos and MDCK cells could isolate the influenza virus, and the hemagglutination inhibition test showed that no antigenic differences were produced in the isolated strains. NGS analysis revealed that the H3N2 virus underwent an F195Y mutation in the (RBS) region of the hemagglutinin (HA) protein after adaptation through chicken embryo passages. Receptor-binding experiments demonstrated that the F195Y mutation enhanced the virus′s binding ability to α2, 3-linked sialic acid glycan (Neu5Acα2-3Galβ1-4GlcNAcβ-PAA, 3′SLN), while the mutation did not affect the affinity of the RBS pocket for α2, 6-linked sialic acid glycan (Neu5Acα2-6Galβ1-4GlcNAcβ-PAA, 6′SLN). Molecular docking and molecular dynamics simulation result indicate that the F195Y mutation, by replacing a hydrophobic amino acid with a hydrophilic one, leads to a significant decrease in the structure of the RBS pocket, enhancing the binding stability of the H3N2 influenza virus with α2, 3-sln. This is specifically manifested by an increase in binding time and an increase in the number of hydrogen bonds at the RBS site with the receptor. Furthermore, the F195Y mutation does not alter the binding of the virus to other receptors.Conclusions:The F195Y mutation in the RBS pocket of H3N2 influenza virus is a key site affecting the viral chicken embryo inadaptability.

Objective To explore the correlation between cognitive function and methylation levels of various CpG sites in the promoter region of the glutamate ionotropic receptor NMDA type subunit 2B(GRIN2B)gene in patients with bipolar depression accompanied by anxiety symptoms.Methods According to the 14-item Hamilton anxiety rating scale(HAMA)score,31 bipolar depression patients were divided into a group of 15 with anxiety symptoms and a group of 16 without anxiety symptoms.Sixteen healthy individuals were selected as controls during the same period.The Montreal cognitive assessment(MoCA),digital span test(DST),trail making test A(TMT-A),and Stroop color and word test(SCWT)were used to measure cognitive areas such as global cognitive function,attention and executive control,information processing speed,executive function in three groups.The DNA methylation levels of the CpG site in the GRIN2B gene promoter region in the peripheral blood of all participants were measured using Massarray spectrometry.Results The CpG sites showing differences in DNA methylation levels among the three groups were CpG3,CpG5,CpG7,CpG10,and CpG12(P<0.05),and the level of CpG12 methylation was lower in the group with anxiety than in the group without anxiety(36.23%±16.41%vs.50.20%±19.79%,P<0.05).Partial correlation analysis showed that,in the group with anxiety,poor naming ability was correlated with the lower methylation level of GRIN2B gene's CpG4(r=0.670,P=0.034),poor executive function was correlated with the lower CpG6 methylation level(r=0.926,P<0.001),poor attention was correlated with the higher CpG8 methylation level(r=-0.810,P=0.025),poor verbal memory was correlated with the higher CpG9 methylation level(r=-0.810,P<0.001),and poor abstract ability was correlated with the higher CpG10 methylation level(r=-0.756,P=0.011).Conclusion The DNA methylation level in the promoter region of the GRIN2B gene may be associated with cognitive impairment and anxiety symptoms in patients with bipolar depression.