BACKGROUND:Upper lumbar spinal stenosis is a multifactorial degenerative disorder of the spine.For narrowing of the spinal canal in the upper lumbar region(L1-L4),surgical decision-making is particularly complex.Existing minimally invasive surgeries each have their own advantages and limitations.Currently,there are few reports on biomechanical comparison and finite element analysis of different surgical methods for the treatment of high lumbar spinal stenosis.OBJECTIVE:To analyze the biomechanical impact of endoscopic unilateral laminotomy for bilateral decompression,transforaminal endoscopic lumbar decompression,and cross-overtop decompression in the treatment of upper lumbar spinal stenosis using endoscopy,and to verify the reliability and effectiveness of these three surgical techniques in treating upper lumbar spinal stenosis,providing a biomechanical basis for clinical decision-making.METHODS:The CT images of the lumbar spine of a healthy volunteer were selected,and the finite element model M0 of the normal lumbar L1-L5 segments was established using Mimics,Geomagic,Solid works,and Ansys software.The L2-L3 segment,representing upper lumbar characteristics,was chosen.Based on this model,the surgical models for endoscopic unilateral laminotomy for bilateral decompression(M1),transforaminal endoscopic lumbar decompression(M2),and cross-overtop decompression(M3)were established.Using software,the changes in the range of motion of the entire lumbar segment and the maximum Von Mises stress of the intervertebral discs were simulated and evaluated for each group of models under six loading conditions:flexion,extension,left lateral bending,right lateral bending,left rotation,and right rotation.RESULTS AND CONCLUSION:(1)Compared with model MO,the range of motion in M1,M2,and M3 increased under all six conditions,with M1 showing a greater increase.(2)M1 and M2 demonstrated significant increases in range of motion under forward bending,extension,and right rotation,while the increase under other conditions remained below 7％.(3)Compared with model M3,model M1 exhibited slightly increased overall joint range of motion during extension and left bending,while no significant changes were observed in other aspects,and the L1-L5 lumbar segments did not reach an unstable state.(4)In model M1,the maximum Von Mises stress of the intervertebral discs increased most significantly under flexion and extension loading conditions.However,under left lateral bending,right lateral bending,left rotation,and right rotation loading conditions,the increase did not exceed 5％.(5)These findings suggest that due to the sagittal anatomical characteristics of the facet joints,the unilateral laminotomy for bilateral decompression technique,while decompressing,involves resection of more facet joints,which impacts overall segmental stability.The transforaminal endoscopic lumbar decompression technique is suitable for patients with foraminal stenosis but cannot achieve complete decompression for those with severe ventral central stenosis.The Cross-Overtop technique effectively enlarges the volume of the central canal and lateral recess,optimizing decompression,and shows unique advantages in treating upper lumbar spinal stenosis.

BACKGROUND:Upper lumbar spinal stenosis is a multifactorial degenerative disorder of the spine.For narrowing of the spinal canal in the upper lumbar region(L1-L4),surgical decision-making is particularly complex.Existing minimally invasive surgeries each have their own advantages and limitations.Currently,there are few reports on biomechanical comparison and finite element analysis of different surgical methods for the treatment of high lumbar spinal stenosis.OBJECTIVE:To analyze the biomechanical impact of endoscopic unilateral laminotomy for bilateral decompression,transforaminal endoscopic lumbar decompression,and cross-overtop decompression in the treatment of upper lumbar spinal stenosis using endoscopy,and to verify the reliability and effectiveness of these three surgical techniques in treating upper lumbar spinal stenosis,providing a biomechanical basis for clinical decision-making.METHODS:The CT images of the lumbar spine of a healthy volunteer were selected,and the finite element model M0 of the normal lumbar L1-L5 segments was established using Mimics,Geomagic,Solid works,and Ansys software.The L2-L3 segment,representing upper lumbar characteristics,was chosen.Based on this model,the surgical models for endoscopic unilateral laminotomy for bilateral decompression(M1),transforaminal endoscopic lumbar decompression(M2),and cross-overtop decompression(M3)were established.Using software,the changes in the range of motion of the entire lumbar segment and the maximum Von Mises stress of the intervertebral discs were simulated and evaluated for each group of models under six loading conditions:flexion,extension,left lateral bending,right lateral bending,left rotation,and right rotation.RESULTS AND CONCLUSION:(1)Compared with model MO,the range of motion in M1,M2,and M3 increased under all six conditions,with M1 showing a greater increase.(2)M1 and M2 demonstrated significant increases in range of motion under forward bending,extension,and right rotation,while the increase under other conditions remained below 7％.(3)Compared with model M3,model M1 exhibited slightly increased overall joint range of motion during extension and left bending,while no significant changes were observed in other aspects,and the L1-L5 lumbar segments did not reach an unstable state.(4)In model M1,the maximum Von Mises stress of the intervertebral discs increased most significantly under flexion and extension loading conditions.However,under left lateral bending,right lateral bending,left rotation,and right rotation loading conditions,the increase did not exceed 5％.(5)These findings suggest that due to the sagittal anatomical characteristics of the facet joints,the unilateral laminotomy for bilateral decompression technique,while decompressing,involves resection of more facet joints,which impacts overall segmental stability.The transforaminal endoscopic lumbar decompression technique is suitable for patients with foraminal stenosis but cannot achieve complete decompression for those with severe ventral central stenosis.The Cross-Overtop technique effectively enlarges the volume of the central canal and lateral recess,optimizing decompression,and shows unique advantages in treating upper lumbar spinal stenosis.

Objective To investigate the diagnostic value of our regression model based on quantitative parameters of dual-energy CT and clinical features for stages T2 and T3 colorectal cancer.Methods A cross-section study was performed on 91 patients with colorectal cancer confirmed by postoperative pathology in our hospital from January 2022 to November 2023.All of them underwent dual-energy CT examination.According to the pathological T staging criteria of Chinese Colorectal Cancer Diagnosis and Treatment Standard(2020 Edition),they were divided into T2 group(n=43)and T3 group(n=48).Univariate analysis was used to compare the differences in quantitative CT parameters and clinical features between the 2 groups,and the obtained significant variables were employed to construct diagnosis models by univariate or multivariate logistic regression analysis.The area under receiver operating characteristic curve(AUC)of the CT parametric model and the model combined with clinical features was compared to evaluate the efficacy of diagnosing T2 and T3 stages.Results Univariate analysis showed that carcinoembryonic antigen(CEA),N stage,tumor location,tumor longest diameter(LD),CT value of virtual noncontrast(CT-VNC),fat fraction,electron density(Rho)and dual energy index(DEI)were significantly different between the T2 and T3 groups(P＜0.05).Multivariate logistic regression analysis found that N stage,tumor location,LD,fat fraction and DEI were independent risk factors for the diagnosis of stage T3.The AUC value of the model of above CT parameters in diagnosing stage T3 colorectal cancer was 0.671(95％CI:0.558～0.783),and the AUC value of the combined model of above CT parameters and clinical features was 0.886(95％CI:0.815～0.957),and statistical difference was observed in the AUC value between the combined model and the CT parametric model(P＜0.01).Conclusion The regression model constructed with dual-energy CT quantitative parameters combined with clinical features has high value in the preoperative diagnosis of stages T2 and T3 colorectal cancer before surgery.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

OBJECTIVE: To analyze the laboratory detection results of hemolytic disease of the fetus and newborn(HDFN). METHODS: Related test results of 283 newborns and their mothers' blood samples from Kunming Maternal and Child Health Hospital from August 2023 to May 2024 were collected, including mother and child ABO blood group, RhD blood group, as well as 3 tests of HDFN, total bilirubin (TBil) and indirect bilirubin (IBil). RESULTS: 283 were ABO incompatibility, among which 187 were HDFN positive, with a positive rate of 66.08%; the positive rate of HDFN in neonates with antigen-A incompatibility was 74.12%(126/170), the positive rate of HDFN in neonates with antigen-B incompatibility was 53.57%(60/112), which was the highest in neonates with O/A incompatibility ［75.45%(126/167)］, followed by O/B incompatibility［54.55%(60/110)］. Group by age, the positive rates of HDFN in the ≤1 d group, 2 d group, 3 d group, 4 d group, 5 d group and ≥6 d group were 76.03%(111/146), 67.86%(38/56), 57.14%(24/42), 38.46%(5/13), 46.15%(6/13) and 23.08%(3/13), respectively. With the increase of age, the positive rates of HDFN gradually decreased, there was a statistically significant difference between the ≤3 day age group and >3 day age group ( P <0.05). There was no statistically significant difference in TBil and IBil levels between the "direct antibody+indirect antibody+release+" group and the HDFN negative group in newborns. HDFN infants exhibited a rapid increase in bilirubin levels within the first day after birth, with significantly higher TBil and IBil values compared to Non ABO-HDFN infants in the ≤1 day group ( P <0.01). However, the difference of bilirubin levels between the two groups gradually narrowed from 2-6 days after birth, and the difference was not statistically significant (P >0.05). The peak value of TBil and IBil occurred on the 4th day after birth in HDFN infants. CONCLUSION ABO-HDFN is most commonly seen in newborns whose mothers are type-O, and the positive rate was the highest in newborns with O/A incompatibility. The detection rate of HDFN is affected by the age of the newborns, and the two were correlated inversely. ABO-HDFN group developed more rapidly with a higher peak. Therefore, HDFN tests should be carried out as soon as possible for mothers and newborns with incompatible blood types, and appropriate treatment should be provided to prevent complications.
Humans ; Infant, Newborn ; ABO Blood-Group System ; Erythroblastosis, Fetal/epidemiology* ; Female ; China/epidemiology* ; Blood Group Incompatibility ; Male ; Bilirubin/blood*

OBJECTIVE: To investigate the role of MK2 inhibitor MMI-0100 on inflammatory response after allogeneic hematopoietic stem cell transplantation (allo-HSCT) and related mechanisms. METHODS: An allo-HSCT mouse model was established. Recipient rats were randomly divided into BMT+NaCl group and BMT+MMI-0100 group, and were injected with NaCl and MMI-0100 every day after transplantation, respectively. Samples of the two groups were collected on d 7 and 14, femur paraffin sections were stained with HE, and pathological changes in the bone marrow cavity were observed under the light microscope. The gene and protein expression levels of pro-inflammatory cytokines IL-1β and IL-18 were detected by qPCR and Western blot. Macrophage typing was detected by flow cytometry. The expression levels of NLRP3 and Caspase-1 were detected by Western blot. RESULTS: Inflammatory cell infiltration in the bone marrow cavity was significantly reduced in the BMT+MMI-0100 group. Western blot results showed that the protein expression levels of IL-1β and IL-18 in the BMT+MMI-0100 group were decreased compared to the BMT+NaCl group on day 7 and day 14 (all P <0.01). The qPCR results showed that compared to the BMT+NaCl group, the IL-18 gene expression levels in the BMT+MMI-0100 group were significantly reduced on day 7 and day 14 (both P <0.01). In the BMT+MMI-0100 group, the expression level of IL-1β gene decreased on day 7 (P <0.05), but increased and was higher than that in the BMT+NaCl group on day 14 (P <0.05). Flow cytometry results showed that the expression of M1 macrophages and M1/M2 ratio decreased in the BMT+MMI-0100 group compared to BMT+NaCl group (all P <0.05). Western blot results showed that the protein expression levels of NLRP3 and Caspase-1 in the BMT+MMI-0100 group were lower than those in the BMT+NaCl group (all P <0.05). CONCLUSION MMI-0100 can ameliorate bone marrow inflammatory injury after allo-HSCT and may act by reducing NLRP3 expression to promote M2 polarization.
Animals ; Interleukin-1beta/metabolism* ; Rats ; Interleukin-18/metabolism* ; Hematopoietic Stem Cell Transplantation/adverse effects* ; Mice ; NLR Family, Pyrin Domain-Containing 3 Protein/metabolism* ; Inflammation ; Bone Marrow/pathology* ; Protein Serine-Threonine Kinases/metabolism* ; Intracellular Signaling Peptides and Proteins/antagonists & inhibitors* ; Caspase 1/metabolism* ; Macrophages ; Transplantation, Homologous