AIM:To investigate the effect of ranibizumab on blood flow density in different regions of the macula in patients with macular edema(ME)secondary to ischemic and non-ischemic branch retinal vein occlusion(BRVO).METHODS:This retrospective study enrolled patients with BRVO-ME who were treated at the hospital from September 2019 to March 2021. Patients were divided into ischemic and non-ischemic groups based on fundus findings. All patients received intravitreal injections of ranibizumab once monthly for three consecutive months. Best corrected visual acuity(BCVA), central macular thickness(CMT), and macular blood flow density were measured before treatment and at 1 d, 1 wk, 1 and 3 mo after treatment.RESULTS: A total of 46 patients(46 eyes)with BRVO-ME were included, comprising 21 eyes in the ischemic group(7 males, 14 females; mean age 55.81±10.36 y)and 25 eyes in the non-ischemic group(11 males, 14 females; mean age 54.84±9.81 y). At 3 mo after treatment, BCVA(LogMAR)in the non-ischemic group was superior to that in the ischemic group(0.19±0.19 vs 0.38±0.27, P=0.009). Analysis of CMT changes showed that the reduction amplitude in the ischemic group was significantly greater than that in the non-ischemic group at both 1 and 3 mo after treatment(all P<0.05). Blood flow densities in the whole, parafoveal, and perifoveal regions of the superficial capillary plexus(SCP), as well as in the whole and perifoveal regions of the deep capillary plexus(DCP), were significantly lower in ischemic patients than in non-ischemic patients, while blood flow density in the foveal region of DCP was significantly higher in the ischemic group(all P<0.05).CONCLUSION: Ranibizumab is effective for both types of patients. Non-ischemic patients have a better long-term visual prognosis, and the advantage may be related to better blood flow perfusion patterns in specific areas 3 mo after treatment. Monitoring changes in blood flow density in these areas can help provide personalized treatment for patients.

Objective:To establish a rapid and precise dose measurement method with EBT4 film and ensure its measurement accuracy to be within the required range through strict operational procedures for the purpose of addressing the two essential issues of poor measurement accuracy and timeliness of EBT film under FLASH conditions.Methods:After storing under different humidity conditions for a certain period of time, the film was exposed to radiation for analyzing the influence of air humidity on the intrinsic performance of EBT film. By means of repeated scanning operations and the film angle rotation, the influences of repeated scanning and film placement angle were analuzed. Parabolic correction method was used to reduce the spatial position influence during the scanning process. By analying the relationship between net optical density (netOD) and absorbed dose through the comparison of three fitting method, the optimal fitting curve was selected. After irradiation of the same batch of films for 5 min and 24 h, the film doses were calibrated and then compared with ionization chamber-measured result. The rapid and precise film dosimetry method was used to measure both the percentage depth dose from X-rays at ultra-high dose rate and the dose distribution at a depth of 2 cm in water.Results:Air humidity had the greatest influence on the intrinsic performance of EBT film (approximately 20%). The average deviation of repeated scans is within 0.5%. The angle at which the film is placed significantly affected the readouts of the film with the maximum influence approximately 70%. The net optical density combined with polynomial fitting can control the fitting residuals of 1-16 Gy within 3%. The change rate of light channels at 5 min already mostly met the requirements of the rapid mode (< 0.5%). Compared with the measurement result obtained using the reference ionization chamber, the deviations of the 5 min or 24 h dose calibration curves were all within 2%.Conclusions:The EBT4 film can be employed as a precise dosimeter to quickly measure the FLASH radiation dose. Rapid and precise FLASH dose measurements can meet the stringent requirements of both preclinical and clinical FLASH research.

AIM To study the chemical constituents from the stems and barks of Maytenus variabilis(Hemsl.)C.Y.Cheng.METHODS The 95％ethanol extract from the stems and barks of M.variabilis was isolated and purified by silica gel,Sephadex LH-20 and semi preparative HPLC,then the structures of obtained compounds were identified by physicochemical properties and spectral data.RESULTS Twenty-three compounds were isolated and identified as β-amyrin(1),3β-acetoxyolean-12-en-11-one(2),ursa-12-ene-11-one-3-ol octocosate(3),friedelin(4),canophyllol(5),pinoresinol(6),medioresinol(7),isolariciresinol(8),dihydrodehydrodiconiferyl alcohol(9),vanillic acid(10),7R,8S-5-methoxydihydrodehydroconiferyl alcohol(11),β-hydroxypropiovanillone(12),triptregeline B(13),triptregeline E(14),(+)-evofolin B(15),2,5-dimethoxybenzoquinone(16),olean-12-ene-3,11-dione(17),β-sitosterol(18),(-)-(7R,7'R,7"S,8S,8'S,8"S)-4',4"-dihydroxy-3,3',3",5-tetramethoxy-7,9',7',9-diepoxy-4,8"-oxy-8,8'-sesquineolignan-7",9"-diol(19),phyllostadimer B(20),rayalinol(21),lyoniresinol(22),dihydrobuddlenol B(23).CONCLUSION Compounds 3,9-11,13-14,16,19-21,23 are isolated from genus Maytenus for the first time,and compounds 2,4-5,7-8,12,15,17,22 are first found from this plant.

Objective To explore the medication patterns of famous traditional Chinese medicine practitioners in treating challenging aspects of idiopathic membranous nephropathy(IMN)based on data mining.Methods Medical cases meeting the inclusion and exclusion criteria were collected.Statistical analysis of syndrome patterns,herb frequency,association rules,and cluster analysis were conducted for key challenges,including disease duration ≥ 1 year,renal function impairment,hypoalbuminemia,and hypertriglyceridemia.Results A total of 128 medical cases were included.Spleen-kidney deficiency syndrome was identified as the most common pattern.Based on herb frequency and association rule analysis,Huangqi,Baizhu,Fuling,Danggui,Danshen were the most frequently used in prescription.Cluster analysis revealed core herbal groupings primarily based on classical formulas such as Zhenwu decoction,Shenling Baizhu powder,and Shuilu Erxian dan.Conclusion In the medical cases addressing treatment challenges,the syndrome patterns were predominantly characterized by spleen-kidney deficiency.Core medications included Huangqi,Baizhu,Fuling,Danggui and Danshen.The treatment emphasizes strengthening invigorating spleen and kidney,with variations in medication patterns based on disease duration and complications.

Objective To investigate whether microRNA-21-5p(miR-21)plays a protective role in hyperoxia-induced acute lung injury(HALI)by regulating ferroptosis through the STAT3/P53/SLC7A11 axis.Methods The interaction between STAT3 and P53 was analyzed by co-immunoprecipitation(Co-IP).Fifty 9-week-old male C57BL/6J mice were randomly divided into normoxia(Control)group,HALI group,miR-21 overexpression(miR-21)group,STAT3 inhibitor(HY-13818)group,and ferrostatin-1(Fer-1)group.After the mice from the miR-21 group received miR-21-5p AAV6 or empty vector via tracheal catheter instillation,the animals were then monitored for 3 weeks.The HY-13818 group was intraperitoneally injected with HY-13818(10 mg/kg)3 times weekly for 2 weeks.The Fer-1 group received 0.8 mg/kg ferrostatin-1 via tail vein injection once daily for 2 consecutive days during modeling.The HALI model was established by exposure to>90%oxygen.After 48 h of hyperoxia,blood samples were collected via orbital sampling for RT-PCR analysis of miR-21 expression.Lung tissues were harvested for wet/dry weight ratio and assessment of histopathological changes via HE staining for lung injury score.Activity of superoxide dismutase(SOD)and contents of malondialdehyde(MDA),Fe2?,glutathione(GSH),and reactive oxygen species(ROS)were measured using photocolorimetry,spectrophotometry and fluorometry.Western blotting was used to evaluate the protein expression of STAT3,P53,SLC7A11,and GPX4.Results The results of Co-IP showed that STAT3 could bind to P53.The HALI group exhibited obviously destroyed alveolar structure,disordered arrangement,thickened interval,with a large number of infiltrated neutrophils and collapsed alveoli,and had significantly increased pathological score of lung injury and ratio of lung Wwet/Ddry weight when compared with the Control group(P<0.05).In the miR-21 group,HY-13818 group and Fer-1 group,the severity of lung injury was significantly reduced,and the pathological score of lung injury and the ratio of Wwet/Ddry weight were decreased(P<0.05)when compared with the HALI group.Compared with the control group,the contents of MDA,Fe2+and ROS were increased(P<0.05),the activity of SOD and content of GSH were declined(P<0.05),the protein levels of STAT3 and P53 were increased(P<0.05),and those of SLC7A11 and GPX4 were decreased(P<0.05)in the HALI group.Compared with the HALI group,decreased MDA and ROS levels(P<0.05),enhanced SOD activity,Fe2+and GSH levels(P<0.05),down-regulation of STAT3 and P53(P<0.05)and up-regulation of SLC7A11 and GPX4(P<0.05)were observed in the miR-21 group and HY-13818 group.Conclusion MiR-21 alleviates HALI,which may be related to its inhibition of ferroptosis through the STAT3/P53/SLC7A11 axis.

The blue fluorescent carbon dots(TMCDs)and cyan fluorescent carbon dots(TMCDs-H2O)were synthesized fromm-phenylenediamine and tricarballylic acid through air-assisted melting polymerization and one-step hydrothermal method,respectively.Air purging could effectively inhibit the side reactions and reduce the derivative structures in the carbon dots product.The structure and morphology of these two materials were systematically characterized using liquid nuclear magnetic resonance spectroscopy(NMR),mass spectrometry(MS),and transmission electron microscopy.Compared to TMCDs-H2O((3.12±0.63)nm),TMCDs showed a smaller average particle size(approximately(1.85±0.02)nm).The NMR and MS analysis revealed that although the main structure of both types of carbon dots was similar,TMCDs exhibited a simpler structure with higher degree of polymerization.These results suggested that supramolecular interactions might introduce numerous small molecule derivatives into TMCDs-H2O particles,resulting in lower polymerization degree,multiple substructures,and larger particle size characteristics for this material.When employed as chemical sensors for metal ion detection,in the linear range of 1×10-5-5×10-4 mol/L,the detection limits of Fe3+by TMCDs and TMCDs-H2O were 3.3×10-6 mol/L and 3.8×10-6 mol/L,respectively.The experimental results demonstrated that the recoveries of CDs and inductively coupled plasma optical emission spectrometer(ICP-OES)were similarity,whereas TMCDs displayed a considerable relative standard deviation.This study demonstrated that endogenously derived structures in CDs could enhance the performance of metal ion sensing.

Organophosphorus nerve agents are the most threatening chemical warfare agents and terrorist agents.The number of nerve agents and their related chemicals involved in the verification of Chemical Weapon Convention(CWC)exceeds ten million,with the majority being isomers.Accurate structural identification of these chemicals has always been one of the challenges in CWC related verification analysis.In this work,a total of 17 kinds of alkyl phosphonate isomers and structural analogs from 5 groups were designed and synthesized,and then analyzed by gas chromatography-mass spectrometry(GC-MS)and gas chromatography-infrared spectroscopy(GC-FTIR).The spectra of isomers or structural analogs obtained from two techniques as well as the structural information provided therein were compared and analyzed.The results showed that for isomers or structural analogs with similar MS spectra,FTIR spectra could provided more structural fingerprint information of compounds and had advantages in confirming structures.Combined with the excellent separation ability of GC,GC-FTIR can be used to assist GC-MS in the structural confirmation of alkyl phosphates,achieving rapid and accurate identification of isomers or structural analogues.

Due to the immaturity of visualization and quantitative analysis methods,the utilization rate of level 3 characteristics is seriously insufficient.In this work,based on the wet-membrane method and scanning electrochemical microscopy(SECM),and the introduction of conductive black ink to enhance the visualization effect,a systematic level 3 feature quantitative method was developed.Firstly,the feasibility and effect of the multi-level characteristics extraction strategy of latent fingerprints was investigated.Then,the influences of various deposition conditions on the level 3 features were explored.The results showed that the higher the deposition pressure,the wider the ridges,and the smaller the pore size.Moreover,excessive oil content could cause the pore size to be smaller and even been covered.Subsequently,the quantitative method was established from various pore characteristics such as pore number,pore activity,pore size,pore-to-pore distance and pore-to-pore angle.The stability of the level 3 features(pore number,pore-to-pore distance and pore-to-pore angle)was confirmed via repeated experiments on the same fingerprint region.After stability test,the recognition ability of three indicators was investigated for different fingerprints,verifying the uniqueness of pore-to-pore distance and pore-to-pore angle.Finally,a multiple recognition strategy was proposed that combined frequency distribution fitting curves for pore-to-pore distance and angle with other level 3 details,and was successfully applied to incomplete fingerprint recognition.This ink-enhanced optical and electrochemical extraction method and quantitative analysis provided a new path for fingerprint recognition.

In this work,near infrared carbon quantum dots(NIR-CDs)were synthesized by hydrothermal method using biomass material Clausena lansium leaves.The synthesized NIR-CDs emitted maximum fluorescence signal at 677 nm,which was independent of excitation wavelength.The characterization results showed that there were abundant groups on the surface of NIR-CDs.Pd2+could form non-fluorescent compounds with the surface groups of NIR-CDs,resulting in fluorescence quenching(Fluorescence signal was denoted as F0).Because chlorpromazine hydrochloride(CPZ)parent nucleus contained unoxidized S atom,CPZ could form stable colored complex with Pd2+under acidic conditions.In the presence of CPZ,Pd2+dissociated from the surface of NIR-CDs and bonded with CPZ,so that the fluorescence signal could be restored(Fluorescence signal was denoted as F).An"on-off-on"fluorescence sensor was thus constructed.The fluorescence signal recovery value of NIR-CDs(△F=F-F0)showed a good linear relationship with the concentration of CPZ in the range of 5.68-28.43 μg/mL,and the detection limit(3σ)was 0.078 μg/mL.The sensor was applied to determination of CPZ in pharmaceutical preparations,and the recoveries were 94％-106％.The developed fluorescence sensor was expected to be used in quality control of actual pharmaceutical preparations.

Introducing fingerprint level 3 features(especially sweat pores)in fingerprint recognition can significantly improve the value of fingerprints.However,conventional fingerprint visualization methods suffer from issues such as poor stability and reproducibility,insufficient resolution,and feature masking in detecting level 3 features.Electrospun membrane has unique advantages in latent fingerprint(LFP)detection due to its excellent adsorption performance and high specific surface area,and thus its application potential in LFP visualization urgently need to be explored.A novel pore visualization method based on core-shell structured PAN-Flu/PVP composite nanofibrous membrane was proposed in this work.Specifically,the PAN-Flu/PVP composite nanofibrous membrane was prepared via coaxial electrospinning technology,with polyacrylonitrile(PAN)loaded with fluorescein(Flu)as the core and polyvinylpyrrolidone(PVP)as the shell.The experimental results showed that the prepared PAN Flu/PVP composite nanofibrous membrane had a porous structure and excellent adsorption performance.Based on the water solubility of the outer shell PVP and the water induced fluorescence enhancement effect of the core Flu,high-resolution visualization of sweat pores could be achieved within 2 s.The optimization experiment showed that the best quality of sweat latent fingerprints was obtained when the Flu content was 4 mg/mL,the spinning time was 1 h,and the sweating time was 2 min.Through repeated fingerprinting and live fingerprint comparison experiment,the strong stability and high reproducibility of the as-produced membrane in displaying fingerprint sweat pores were finally verified.In summary,the development method could quickly,stably and accurately extract the spatial distribution and activity level of fingerprint sweat pores,which was of great significance for improving the utilization and value of fingerprints.