By consulting relevant literature of ancient herbal books and processing specifications， this paper made a systematic research and analysis of Ostreae Concha， including the name， producing area， harvesting， quality， historical evolution of processing， relevant processing specifications， modern processing technology， and changes in chemical composition and pharmacological effects before and after processing， in order to provide documentary evidence for the research on processing technology and the establishment of quality standards. According to the textual research， it is known that Ostreae Concha has a long history of being used in medicine， and there have been many aliases and local names in each historical period. Shennong's Classic of the Materia Medica（Shennong Bencaojing） began to use Muli as the correct name， which has continued to use to today， and there were also aliases such as Muge， Zuogu Muli and Haoke. Ostreae Concha has a wide range of localities and irregular harvesting periods. The ancients believed that its left shell was of superior quality， but this has not been seen in modern. And there were many kinds of processing methods of Ostreae Concha， such as grinding， roasting， calcining， frying， simmering， quenching and so on， and the calcining was still in use. The different editions of Chinese Pharmacopoeia from 1963 to 2020 contain only calcined Ostreae Concha， and the local processing specifications mainly include three kinds of processed products（calcined products， salt-soaked products and vinegar-soaked products）. Modern processing research mainly focuses on process optimization， changes in chemical composition and pharmacological effects， and the research methods are relatively single. Overall， there are currently issues such as inconsistent processing standards， unclear process parameters and imperfect quality standards， which are not conducive to the quality control and standardized clinical use of Ostreae Concha. Therefore， it is necessary to further investigate the pharmacological substance basis of Ostreae Concha and its processed products in order to elucidate the processing mechanism， standardize the processing technology and improve the quality standard.

ObjectiveTo explore the differences in the accumulation of secondary metabolites of Dendrobium nobile cultivated on epiphytic stones and trees， so as to elucidate the scientific connotation of "only those that grow on stones has superior quality"， and provide a direction for the cultivation and quality evaluation of D. nobile. MethodsUltra-performance liquid chromatography-triple quadrupole/linear ion trap mass spectrometry（UPLC-QTRAP-MS/MS）-based widely targeted metabolomics was used to detect the metabolites of D. nobile cultivated on epiphytic stones and trees. And the combination of principal component analysis（PCA）， hierarchical cluster analysis（HCA）， and orthogonal partial least squares-discriminant analysis（OPLS-DA） was performed for multivariate statistical analysis of metabolites. Differential metabolites were screened by variable importance in the projection（VIP） value≥1 and log₂fold change（FC）≥1 or ≤-1， and Kyoto Encyclopedia of Genes and Genomes（KEGG） enrichment analysis was conducted. ResultsA total of 1 267 metabolites were identified in the stems of D. nobile from the two cultivation modes， dominated by flavonoids（292）， phenolic acids（284）， and alkaloids（189）. Through OPLS-DA screening， 473 differential metabolites were obtained. Compared to epiphytic tree-cultivated D. nobile， epiphytic stone-cultivated D. nobile exhibited upregulation of flavonoids， phenolic acids， alkaloids， lignans and coumarins， while quinones and terpenoids were down-regulated. The differential metabolites mainly included flavonoid glycosides and alkaloids， and these differential metabolites significantly contributed to characterizing the two cultivation patterns. KEGG enrichment analysis revealed significant enrichment in pathways of flavone and flavonol biosynthesis， flavonoid biosynthesis， tyrosine metabolism， and phenylalanine metabolism in epiphytic stone-cultivated D. nobile. ConclusionEpiphytic stone cultivation is beneficial for the accumulation of phenolic acids， flavonoids， and alkaloids in D. nobile， indicating that the "only those that grow on stones has superior quality" documented in the materia medica has certain scientific basis， and the findings also provide a reference for quality evaluation and discrimination research between epiphytic stone and tree cultivated D. nobile.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo analyze the premature mortality and disease burden attributable to major chronic diseases in Huangyan District, Taizhou City, Zhejiang Province from 2015 to 2024, and to provide data support for the efforts of local chronic disease prevention and control. MethodsBased on the mortality surveillance data of registered residents in Huangyan District from 2015 to 2024, mortality rates and premature mortality rates of malignant tumors, diabetes mellitus, cardiovascular and cerebrovascular diseases, and chronic respiratory diseases were calculated. Indicators such as potential years of life lost (PYLL), average years of life lost (AYLL), and potential years of life lost rate (PYLLR) were also estimated. ResultsFrom 2015 to 2024, the crude mortality rate of major chronic diseases among registered residents in Huangyan District was 514.27/100 000, with an age-standardized mortality rate of 377.17/100 000. The crude (standardized) mortality rate was 588.00/100 000 (422.00/100 000) in males and 440.50/100 000 (328.08 /100 000) in females, indicating higher mortality among males. The fluctuation ranges of premature mortality rate of malignant tumors, diabetes mellitus, cardiovascular and cerebrovascular diseases and chronic respiratory diseases were 4.53%‒8.38%, 0.15%‒0.72%, 2.00%‒4.03% and 0.23%‒0.47%, respectively. The premature mortality rates of malignant tumors and cardiovascular and cerebrovascular diseases showed a decreasing trend (all P<0.05), while that of diabetes mellitus increased statistically significant (P<0.05). Malignant tumors accounted for the highest PYLL and PYLLR (5 107.15 person-years and 9.47‰, respectively), whereas chronic respiratory diseases contributed the lowest (213.25 person-years and 0.40‰, respectively). Cardiovascular and cerebrovascular diseases resulted in the highest AYLL (10.62 years), while chronic respiratory diseases had the lowest (7.64 years). The PYLL, AYLL, and PYLLR for major chronic diseases were 5 432.20 person-years, 10.24 years, and 19.99‰ in males, and 2 617.15 person-years, 10.49 years, and 9.78‰ in females, respectively, indicating greater loss of life expectancy in males than in females. ConclusionFrom 2015 to 2024, both age-standardized mortality and premature mortality attributable to major chronic diseases of registered residents declined in Huangyan District, reflecting notable achievements in chronic disease control. However, malignant tumors and cardiovascular and cerebrovascular diseases remained the main causes of death, while the burden of diabetes mellitus continued to rise. Males experienced higher premature mortality rate and life expectancy loss caused by major chronic diseases than females. Targeted chronic disease screening, risk factor surveillance, and interventions among high-risk populations should be further strengthened by local health authorities.

Objective To investigate the unmet needs for assistive technology for people with physical disabilities in Chengdu,and analyze the related factors. Methods From November,2023 to March,2024,the persons with physical disabilities in Chengdu were selected from Sichuan Individuation service platform,and investigated using World Health Organization rapid Assistive Tech-nology Assessment. Results A total of 558 questionnaires were set up,and 527 effective questionnaires retured.26.8%of them reported un-met needs for aids,with the highest need for mobility aids(66.0%).Lack of support(54.9%),high price(26.3%)and lack of knowledge about aids(20.3%)were the main reasons for not obtaining the aids they needed.Loss of spouse(OR=3.615),serious mobility impairment(OR＞2.926)and serious self-care impairment(OR＞2.781)were the risks of unmet needs for aids. Conclusion It is important to popularize policies and products of aids,pay attention to personal adaptation for people with different barriers,and strengthen the service system,to meet the needs of people with disabilities.