Systemic sclerosis is an autoimmune disease characterized by inflammatory reactions and fibrosis. Myofibroblasts are considered therapeutic targets for preventing and reversing the pathogenesis of fibrosis in systemic sclerosis. Although the mechanisms that differentiate into myofibroblasts are diverse, transforming growth factor β (TGF-β) is known to be a key mediator of fibrosis in systemic sclerosis. This study investigated the effects of extracellular vesicles derived from human adipose stem cells (ASC-EVs) in an in vivo systemic sclerosis model and in vitro TGF-β1-induced dermal fibroblasts. The therapeutic effects of ASC-EVs on the in vivo systemic sclerosis model were evaluated based on dermal thickness and the number of α-smooth muscle actin (α-SMA)-expressing cells using hematoxylin and eosin staining and immunohistochemistry. Administration of ASC-EVs decreased both the dermal thickness and α-SMA expressing cell number as well as the mRNA levels of fibrotic genes, such as Acta2, Ccn2, Col1a1 and Comp. Additionally, we discovered that ASC-EVs can decrease the expression of α-SMA and CTGF and suppress the TGF-β pathway by inhibiting the activation of SMAD2 in dermal fibroblasts induced by TGF-β1. Finally, TGF-β1-induced dermal fibroblasts underwent selective death through ASC-EVs treatment. These results indicate that ASC-EVs could provide a therapeutic approach for preventing and reversing systemic sclerosis.

Purpose: This study investigated the dose perturbation according to the size of the sensitive volume in the dosimeter in small-field dosimetry. Methods: The dose profiles with different field sizes were measured using three different dosimeters: the CC13, Razor ion chamber, and Edge solid-state detector. Both the open and wedged beams with different field sizes were employed in the measurement. The profiles were measured in a water phantom at maximum dose depths of 5, 10, and 20 cm. The penumbra and width of the open-beam profiles were compared according to the types of the dosimeters and beam. The dose fall-off between the peak and 20% dose was evaluated for the wedged beam profiles. Results: In the open-beam measurement, the fall-off of the profile was steeper with the Edge detector, which has the smallest sensitive volume. Meanwhile, the dose in the out-of-field region was the smallest with the Edge detector. The widths of the penumbra were 6.10, 4.47, and 4.03 mm for the profile of the 3×3 cm 2 field measured by the CC13 chamber, Razor chamber, and Edge detector, respectively. The width of the profile was not changed even if different dosimeters were used in the measurement. The wedged beam profiles showed more clear peaks at the field edge when a smaller dosimeter was used. Conclusions The results demonstrate the necessity of dosimeters with a small sensitive volume for measuring a small-field beam or a steep dose gradient.

Purpose: This study evaluated various methods for determining the half-value layer (HVL) of kilovoltage (kV) beams produced by the Varian TrueBeam STx on-board imager. By comparing these methods with the standard ionization chamber approach, the study aimed to identify practical solutions for HVL determination and dosimetric characterization of kV beams, particularly in resource-limited settings. Methods: HVLs for kV beams (40–140 kVp) were measured using an Exradin A12 ionization chamber and a Piranha MULTI meter. The ionization chamber measurements adhered to American Association of Physicists in Medicine Task Group 61 guidelines and served as the reference standard. Additionally, HVL values were calculated using two model-based approaches: SpekPy (a Python-based tool) and Monte Carlo (MC) simulations using Geant4 and GATE. The results from these methods were compared to assess consistency and reliability. Results: Deviations across all methods were generally below 4%. At 40 kV, the most significant discrepancies were attributed to lower signal levels from the ionization chamber. The consistency between the model-based methods and experimental measurements demonstrates the reliability of these alternative approaches for HVL determination. Conclusions Although the ionization chamber remains the gold standard, the Piranha MULTI meter and model-based methods, i.e., SpekPy and MC simulations, have shown promise as viable alternatives, especially in resource-constrained settings. These in silico approaches also offer advantages in convenience and accuracy, supporting their potential for broader future applications.

Purpose: Brachytherapy is essential for treating gynecological cancers as it offers precise radiation delivery to tumors while minimizing radiation exposure to surrounding healthy tissues. The Geneva applicator, introduced in 2020 as a replacement for older models like the Utrecht applicator, enhances MRI-based brachytherapy with improved imaging capabilities and more accurate applicator placement. In 2021, updates to non-reimbursement policies in Korea for MRI-based 3D brachytherapy planning further promoted the adoption of advanced techniques such as the Geneva applicator. This study aims to commission the Geneva applicator, focusing on wall thickness, dummy marker positions, and source dwell positions to ensure accurate dose delivery and safety. Methods: The commissioning process involved measuring wall thickness in both the longitudinal and transverse directions for the tandem and lunar-shaped ovoid tubes and comparing thesemeasurements with the manufacturer’s specifications. Dummy marker positions were verifiedusing CT imaging, with a focus on alignment tolerances of ±1 mm. Source dwell positions were planned using the Oncentra treatment planning system, with measurements taken using EBT4 film and analyzed with RIT software. Results: Wall thickness measurements and dummy marker positions were within the specified tolerance ranges, confirming their accuracy. The source dwell positions, measured and analyzedthrough multiple tests, were all within the ±1 mm tolerance, ensuring the applicator’s reliability. Conclusions The Geneva applicator met all standards for safe and effective use in brachytherapy.The use of a 3D-printed holder was crucial for precise alignment and measurement. With updated reimbursement policies in Korea for MRI-based brachytherapy, the Geneva applicator is expected to significantly impact the future of advanced brachytherapy treatments and research.

Hyperbaric oxygen therapy (HBOT) was conducted on two male patients with chronic prostatitis/chronic pelvic pain syndrome who were resistant to conventional medical therapies. Both patients underwent 20 sessions of 100% oxygen inhalation (2.0 atmosphere absolute for 90 min/day, five days/week for four weeks) in a hyperbaric chamber. The follow-up period was three months. Although the patients reported a slight improvement in the pain domain of the National Institutes of Health-Chronic Prostatitis Symptom Index (NIH-CPSI) after HBOT, no changes were noted in the other domains of NIH-CPSI and International Prostate Symptom Score. No adverse events were encountered during or after HBOT.

Purpose: This study evaluated the nutrition and food intake status among adults in Jeju, Republic of Korea, based on their sociodemographic characteristics and obesity. Methods: Nine hundred and forty-nine adults aged 19 years or older were included based on the 2022 Jeju Nutrition and Physical Activity Survey data. A dietary assessment was conducted using a one-day, 24-hour recall method, and the nutrition status was evaluated using the 2020 Dietary Reference Intakes for Koreans. The sociodemographic status included sex, age, education, and household income, and obesity was defined as a body mass index (BMI) of ≥ 25 kg/m 2 . Results: The mean age of the subjects was 49.8 years, and the overall prevalence of obesity was 48.4% (59.5% for males and 37.2% for females). The top three insufficient nutrients consumed at less than the estimated average requirement were calcium (77.7%), vitamin A (77.3%), and vitamin C (61.3%), while 40.9% of the subjects consumed fat as more than 30% of their total energy intake. The sodium intake was approximately 1.5 times higher than the chronic disease risk reduction intake level. In terms of food groups, the participants consumed more meat (148.2 g/day), seafood (69.0 g/day), potatoes, and starches (41.6 g/day) but consumed fewer vegetables (214.3 g/day) and less dairy (62.0 g/day) than Korean adults. The nutritional status and food intake patterns differed by the sociodemographic status. In addition, the obese group consumed more poultry and beverages than the non-obese group (p < 0.05 for all). Conclusion Adults in Jeju under-consume essential nutrients while over-consuming certain nutrients, such as fat and sodium. The nutritional status also varied according to the sociodemographic characteristics. These findings suggest that sociodemographic factors should be considered carefully when developing nutritional policies and programs to improve the nutritional status and address obesity among adults in Jeju.

Hyperbaric oxygen therapy (HBOT) was conducted on two male patients with chronic prostatitis/chronic pelvic pain syndrome who were resistant to conventional medical therapies. Both patients underwent 20 sessions of 100% oxygen inhalation (2.0 atmosphere absolute for 90 min/day, five days/week for four weeks) in a hyperbaric chamber. The follow-up period was three months. Although the patients reported a slight improvement in the pain domain of the National Institutes of Health-Chronic Prostatitis Symptom Index (NIH-CPSI) after HBOT, no changes were noted in the other domains of NIH-CPSI and International Prostate Symptom Score. No adverse events were encountered during or after HBOT.

Purpose: This study investigated the dose perturbation according to the size of the sensitive volume in the dosimeter in small-field dosimetry. Methods: The dose profiles with different field sizes were measured using three different dosimeters: the CC13, Razor ion chamber, and Edge solid-state detector. Both the open and wedged beams with different field sizes were employed in the measurement. The profiles were measured in a water phantom at maximum dose depths of 5, 10, and 20 cm. The penumbra and width of the open-beam profiles were compared according to the types of the dosimeters and beam. The dose fall-off between the peak and 20% dose was evaluated for the wedged beam profiles. Results: In the open-beam measurement, the fall-off of the profile was steeper with the Edge detector, which has the smallest sensitive volume. Meanwhile, the dose in the out-of-field region was the smallest with the Edge detector. The widths of the penumbra were 6.10, 4.47, and 4.03 mm for the profile of the 3×3 cm 2 field measured by the CC13 chamber, Razor chamber, and Edge detector, respectively. The width of the profile was not changed even if different dosimeters were used in the measurement. The wedged beam profiles showed more clear peaks at the field edge when a smaller dosimeter was used. Conclusions The results demonstrate the necessity of dosimeters with a small sensitive volume for measuring a small-field beam or a steep dose gradient.

Purpose: This study evaluated various methods for determining the half-value layer (HVL) of kilovoltage (kV) beams produced by the Varian TrueBeam STx on-board imager. By comparing these methods with the standard ionization chamber approach, the study aimed to identify practical solutions for HVL determination and dosimetric characterization of kV beams, particularly in resource-limited settings. Methods: HVLs for kV beams (40–140 kVp) were measured using an Exradin A12 ionization chamber and a Piranha MULTI meter. The ionization chamber measurements adhered to American Association of Physicists in Medicine Task Group 61 guidelines and served as the reference standard. Additionally, HVL values were calculated using two model-based approaches: SpekPy (a Python-based tool) and Monte Carlo (MC) simulations using Geant4 and GATE. The results from these methods were compared to assess consistency and reliability. Results: Deviations across all methods were generally below 4%. At 40 kV, the most significant discrepancies were attributed to lower signal levels from the ionization chamber. The consistency between the model-based methods and experimental measurements demonstrates the reliability of these alternative approaches for HVL determination. Conclusions Although the ionization chamber remains the gold standard, the Piranha MULTI meter and model-based methods, i.e., SpekPy and MC simulations, have shown promise as viable alternatives, especially in resource-constrained settings. These in silico approaches also offer advantages in convenience and accuracy, supporting their potential for broader future applications.

Purpose: Brachytherapy is essential for treating gynecological cancers as it offers precise radiation delivery to tumors while minimizing radiation exposure to surrounding healthy tissues. The Geneva applicator, introduced in 2020 as a replacement for older models like the Utrecht applicator, enhances MRI-based brachytherapy with improved imaging capabilities and more accurate applicator placement. In 2021, updates to non-reimbursement policies in Korea for MRI-based 3D brachytherapy planning further promoted the adoption of advanced techniques such as the Geneva applicator. This study aims to commission the Geneva applicator, focusing on wall thickness, dummy marker positions, and source dwell positions to ensure accurate dose delivery and safety. Methods: The commissioning process involved measuring wall thickness in both the longitudinal and transverse directions for the tandem and lunar-shaped ovoid tubes and comparing thesemeasurements with the manufacturer’s specifications. Dummy marker positions were verifiedusing CT imaging, with a focus on alignment tolerances of ±1 mm. Source dwell positions were planned using the Oncentra treatment planning system, with measurements taken using EBT4 film and analyzed with RIT software. Results: Wall thickness measurements and dummy marker positions were within the specified tolerance ranges, confirming their accuracy. The source dwell positions, measured and analyzedthrough multiple tests, were all within the ±1 mm tolerance, ensuring the applicator’s reliability. Conclusions The Geneva applicator met all standards for safe and effective use in brachytherapy.The use of a 3D-printed holder was crucial for precise alignment and measurement. With updated reimbursement policies in Korea for MRI-based brachytherapy, the Geneva applicator is expected to significantly impact the future of advanced brachytherapy treatments and research.