ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Objective To develop a predictive model for postoperative mortality risk in patients with acute aortic dissection(AAD)using the Extreme Gradient Boosting(XGBoost)algorithm combined with Shapley Additive Explanation(SHAP),and to establish a prediction website to serve as a diagnostic and therapeutic support platform for clinicians and patients.Methods A retrospective cohort study design was adopted.Data from 782 AAD patients who underwent surgical treatment at the Fourth Hospital of Hebei Medical University from January 2013 to December 2023 were collected,including basic information and initial serum biomarker test results.Patients were randomly divided into training and test sets at a 7:3 ratio.An external validation set consisting of 313 AAD patients admitted to the Second Hospital of Hebei Medical University from January 2020 to December 2023 was also established for further model validation.Variables were screened using LASSO regression,and an XGBoost machine learning model was constructed and interpreted using SHAP.The predictive performance of the model was evaluated using receiver operating characteristic(ROC)curve analysis.Using the Shiny package,the XGBoost model was deployed to shinyapps.io to create a prediction website for postoperative mortality risk in AAD patients.One patient was selected by simple random sampling from the test set and the external validation set respectively for the prediction example on the Shiny webpage.Results The XGBoost model demonstrated high predictive performance for postoperative mortality in AAD patients,with area under the ROC curve(AUC)values of 0.928(95%CI 0.901-0.956)in the training set,0.919(95%CI 0.891-0.949)in the test set,and 0.941(95%CI 0.915-0.967)in the external validation set.SHAP values indicated the following order of variable importance in the model(from highest to lowest):"lactate dehydrogenase""blood chlorine""multiple organ injury""carbon dioxide combining power""prothrombin time""α-hydroxybutyric acid""creatine kinase isoenzyme""Stanford classification""combined use of bedside blood purification""gender""acute kidney injury""gastrointestinal bleeding""brain injury"and"shock".A risk prediction website for adverse postoperative outcomes in AAD patients was developed using XGBoost-SHAP method(https://dun-dunxiaolu.shinyapps.io/document/)and validated with examples.One randomly selected patient from each of the test and external validation sets was applied:the predicted mortality risk value for patient 1(who died postoperatively)was 0.9539,and that for patient 2(who survived postoperatively)was 0.0206.Conclusions The XGBoost-SHAP model demonstrates high accuracy in predicting postoperative mortality risk for AAD patients.The online prediction tool established based on this model enhances the identification efficiency of high-risk postoperative mortality patients.

Objective:To explore the CT manifestation characteristics of peripancreatic aneurysms related to pancreatitis (PRPA).Methods:A retrospective analysis was conducted on the clinical data of 15 patients with pancreatitis-related aneurysms collected in Deyang People's Hospital from June 2017 to February 2025. Among them, there were 11 males and 4 females, with an age of (56.5±16.9) years. Record the CT manifestations of the patients, and observe the PRPA tumor-carrying arteries, morphology, quantity, bleeding, calcification, dynamic changes, etc.Results:The CT results showed that there were a total of 26 PRPAs in 15 patients. The aneurysm walls of the PRPAs had no calcification, among which 12 cases were single and 1 case was double. Two cases were multiple. The patients were pancreatitis complicated with muscle fiber dysplasia. Among them, one case had 5 PRPAs and the other had 7 PRPAs. Of the 26 PRPAs, 12 were sac-like, 8 were beaded, 4 were fusiform, and 2 were columnar in shape. The numbers of aneurysm-carrying arteries and PRPA were as follows: 8 in the pancreaticoduodenal artery, 7 in the hepatic artery and its branches, 6 in the splenic artery and its branches, 2 in the left gastric artery, 1 in the gastroduodenal artery, 1 in the middle colonic artery, and 1 in the ileocolonic artery. The CT diagnosis report missed 16 PRPAs, with a missed diagnosis rate of 61.5% (16/26). Among the 11 ruptured PRPAs, 4 were missed, with a missed diagnosis rate of 36.4%. Three missed aneurysms were diagnosed by digital subtraction angiography, and one was retrospectively analyzed by CT. Among the 15 unruptured PRPAs, 12 were missed, with a missed diagnosis rate of 80.0%. All the missed aneurysms were detected by retrospective CT analysis. There were 2 images without re-examination and 24 images with re-examination. Among the PRPAs with re-examination images, 4 disappeared after interventional embolization on the same day, 1 relapsed after interventional embolization on the same day, with a reduction in volume and disappeared after 3 days. Three cases underwent elective interventional embolization, among which two shranked and one enlarged before interventional embolization. Among the 16 cases that did not receive interventional treatment, 7 disappeared on their own, 1 was completely liquefied, 5 shrank but did not disappear, 2 remained stable in size without any change, and 1 increased. Among the re-examined PRPA images, 7 showed signs of enlargement.Conclusion:The main characteristics of PRPA are high rupture rate, prone to missed diagnosis and dynamic changes in size.

This study explored a novel digital design and fabrication method for a double constrained split orthodontic miniscrew guide to improve the accuracy and safety of clinical miniscrew implantation and reduce related complications. A patient requiring miniscrew implantation was selected, and data were acquired using cone beam computed tomography (CBCT) and intraoral optical scanning. For the construction of a double constrained split guide including a screw-hole guide and an insertion rod guide, different types of software such as Mimics 24.0, Geomagic wrap 2021, and Materialise magics 21.0 were utilized for 3D reconstruction, model integration, and guide design. The guide was then fabricated via laser metal 3D printing. Model and intraoral try-in results demonstrated that the guide fitted well and was stable. Postoperative CBCT verified that the final miniscrew implantation site was consistent with the preoperative design, and no related complications occurred. This double constrained split orthodontic miniscrew guide provides a precise and safe digital solution for clinical miniscrew implantation.
Humans ; Bone Screws ; Cone-Beam Computed Tomography ; Printing, Three-Dimensional ; Orthodontic Anchorage Procedures/instrumentation* ; Imaging, Three-Dimensional ; Computer-Aided Design

OBJECTIVES: This study aimed to investigate the influence of the dimensional stability of 3D printed resin master model on the replication accuracy of implant replicas. METHODS: Ten digital impressions of patients undergoing continuous crowns or fixed bridge restoration supported by two implants were obtained, and resin models with implant replicas were 3D printed. Scanning rods were fixed on the replicas 3, 7, and 14 days after printing. The 3D, linear, and angular deviations of the scanning rods at different times were analyzed through Geomagic Wrap 2021 software. RESULTS: The position of the replicas shifted mesiolingually, in the same direction as the shrinkage of the model. From day 7 onward, the 3D, distance linear, and angular deviations of the replicas (scanning rod) significantly increased compared with those on the 3rd day (P<0.05). On the 14th day, the changes were even more pronounced, with the above deviations showing statistical significance (P<0.05) compared with those for the 3-day and 7-day groups. No statistical difference in height linear deviation was observed among the groups. CONCLUSIONS The insufficient dimensional stability of 3D printed resin models can lead to changes in the relative position and angle of the replicas, thereby affecting the accuracy of the replicas in recreating the implant's position. Complete manufacturing of prosthesis is recommended within 7 days after the model is printed.
Printing, Three-Dimensional ; Humans ; Dental Implants ; Models, Dental ; Dental Impression Technique ; Crowns

Hormesis effect has been observed in the secondary metabolite synthesis of microorganisms induced by rare earth elements. However, the underlying molecular mechanism remains unclear. To analyze the molecular mechanism of the regulatory effect of Rhodotorula mucilaginosa in the presence of lanthanum chloride, different concentrations of lanthanum chloride were added to the fermentation medium of Rhodotorula mucilaginosa, and the carotenoid content was subsequently measured. It was found that the concentrations of La³⁺ exerting the promotional and inhibitory effects were 0-100 mg/L and 100-400 mg/L, respectively. Furthermore, the expression of 33 genes and the synthesis of 55 metabolites were observed to be up-regulated, while the expression of 85 genes and the synthesis of 123 metabolites were found to be down-regulated at the concentration range of the promotional effect. Notably, the expression of carotenoid synthesis-related genes except AL1 was up-regulated. Additionally, the content of β-carotene, lycopene, and astaxanthin demonstrated increases of 10.74%, 5.02%, and 3.22%, respectively. The expression of 5 genes and the synthesis of 91 metabolites were up-regulated, while the expression of 35 genes and the synthesis of 138 metabolites were down-regulated at the concentration range of the inhibitory effect. Meanwhile, the content of β-carotene, lycopene, and astaxanthin decreased by 21.73%, 34.81%, and 35.51%, respectively. In summary, appropriate concentrations of rare earth ions can regulate the synthesis of secondary metabolites by modulating the activities of various enzymes involved in metabolic pathways, thereby exerting the hormesis effect. The findings of this study not only contribute to our comprehension for the mechanism of rare earth elements in organisms but also offer a promising avenue for the utilization of rare earth elements in diverse fields, including agriculture, pharmaceuticals, and healthcare.
Lanthanum/pharmacology* ; Rhodotorula/genetics* ; Carotenoids/metabolism* ; Hormesis/drug effects* ; Fermentation ; Multiomics

The traditional detection methods for monitoring the biomass,protein,chlorophyll content and other key indicators in the growth of chlorella have some problems,including complicated operation,slow detection speed and difficult large-scale application.In this study,a fast and efficient monitoring method for the key indicators in the growth of chlorella was established using near infrared spectroscopy and chemometrics.Near-infrared spectroscopy was used to collect near-infrared spectra of chlorella algal fluid at different growth stages,and standard methods were used to detect the biomass,protein and chlorophyll contents of corresponding samples.A quantitative analysis model was established based on partial least squares regression(PLSR).To improve the prediction ability of the model,multiplicative scatter correction(MSC)was used to reduce the interference of scattering on the raw spectrum(RS),standard normal variate(SNV)was used to normalize the original spectral data to eliminate differences between samples,continuous wavelet transform(CWT)was used to obtain the key features of spectral data,the first derivative(1st)was used to enhance the differentiation of the original spectral features,and monte carlo-uninformative variable elimination(MC-UVE)and randomization test(RT)were used to screen the valid variables in the wavelength.By evaluating the prediction ability of different models,the quantitative analysis models of chlorella biomass,protein and chlorophyll content were finally determined.The results showed that the model based on 1st combined with RT spectra had better predictive ability for chlorella nutrient content detection,and the root mean square errors of prediction(RMSEP)and coefficients of determination(R2)were 0.041 and 0.933 for biomass,0.012 and 0.973 for protein,and 0.517 and 0.962 for chlorophyll,respectively.This model showed practical application value,and could realize the rapid and accurate detection of chlorella biomass,protein and chlorophyll content at the same time.

AIM To study the chemical constituents from the leaves of Drynaria fortunei(Kunze)J.Sm.and their antioxidant activity.METHODS ODS-AG-HG,Sephadex LH-20 and semi-preparative HPLC were used for separation and purification,then the structures of obtained compounds were identified by physicochemical properties and spectral data.The antioxidant activity was determined by DPPH mothod.RESULTS Fifteen compounds were isolated and identified as kaempferol-3-O-neohesperidoside(1),dihydrodehydrodiconiferyl alcohol(2),kaempferol-3,7-di-O-α-L-rahmnoside(3),astragalin(4),loliolid(5),trichothecene analogue(6),2,2-[bis-4-(2,3-dihydroxypropoxy)phenyl]propane(7),maculatin(8),trichothecin(9),4-[(Z)-but-2-enoyloxy]-8-chloro-12-hydroxy-7,13-epoxytrichothec-9-ene(10),8-deoxy-trichotecin(11),β-sitosterol(12),daucosterol(13),afzelin(14),samwinol(15).The IC50 values of the leaf and rhizome extracts against DPPH free radicals were(0.072±0.005),(0.287±0.012)mg/mL,respectively.CONCLUSION Compounds 1,2,5-11,15 are isolated from this plant for the first time.The leaves of D.fortunei exhibit strong antioxidant activity.