Objective To explore the feasibility and reference value of allogeneic lung transplantation and postoperative monitoring in miniature pigs for lung transplantation research. Methods Two miniature pigs (R1 and R2) underwent left lung allogeneic transplantation. Complement-dependent cytotoxicity tests and blood cross-matching were performed before surgery. The main operative times and partial pressure of arterial oxygen (PaO₂) after opening the pulmonary artery were recorded during surgery. Postoperatively, routine blood tests, biochemical blood indicators and inflammatory factors were detected, and pathological examinations of multiple organs were conducted. Results The complement-dependent cytotoxicity test showed that the survival rate of lymphocytes between donors and recipients was 42.5%-47.3%, and no agglutination reaction occurred in the cross-matching. The first warm ischemia times of D1 and D2 were 17 min and 10 min, respectively, and the cold ischemia times were 246 min and 216 min, respectively. Ultimately, R1 and R2 survived for 1.5 h and 104 h, respectively. Postoperatively, in R1, albumin (ALB) and globulin (GLB) decreased, and alanine aminotransferase increased; in R2, ALB, GLB and aspartate aminotransferase all increased. Urea nitrogen and serum creatinine increased in both recipients. Pathological results showed that in R1, the transplanted lung had partial consolidation with inflammatory cell infiltration, and multiple organs were congested and damaged. In R2, the transplanted lung had severe necrosis with fibrosis, and multiple organs had mild to moderate damage. The expression levels of interleukin-1β and interleukin-6 increased in the transplanted lungs. Conclusions The allogeneic lung transplantation model in miniature pigs may systematically evaluate immunological compatibility, intraoperative function and postoperative organ damage. The data obtained may provide technical references for subsequent lung transplantation research.

ObjectiveTo investigate the intervention mechanism of the traditional Chinese medicine Number 2 Feibi recipe （N2FBR） in idiopathic pulmonary fibrosis （IPF）， focusing on its effects on endoplasmic reticulum （ER） stress， apoptosis， stemness maintenance， and regenerative capacity of alveolar type Ⅱ epithelial cells （AT2 cells）， and to validate the modern translational pathway of the theory of "deficiency of Zong Qi leading to pulmonary atelectasis and atrophy". MethodsA mouse model of pulmonary fibrosis was induced by bleomycin （BLM）. Mice were randomly divided into blank control， model， low-， and high-dose N2FBR intervention groups （9.1， 18.2 g·kg^-1）， and prednisolone intervention group （6.5 mg·kg^-1）. Pulmonary histopathological changes and collagen deposition were evaluated using hematoxylin-eosin （HE） and Masson's trichrome staining. Hydroxyproline （HYP） content was measured by the alkaline hydrolysis method. Lung coefficient and pulmonary function parameters were evaluated. The mRNA expression levels of fibrosis-related factors， including collagen type Ⅰ alpha 1 chain （ColIa1）， alpha-smooth muscle actin （α-SMA）， and tissue inhibitor of metalloproteinase 1 （Timp1）， were detected by real-time polymerase chain reaction （Real-time PCR）. Cell apoptosis was assessed using the terminal deoxynucleotidyl transferase dUTP nick-end labeling （TUNEL） assay. Apoptosis of AT2 cells was further evaluated by double immunofluorescence staining for surfactant protein C （SPC） and cysteine-aspartic protease-3 （Caspase-3）. Endoplasmic reticulum （ER） stress in AT2 cells was examined by double staining for SPC and protein kinase R-like endoplasmic reticulum kinase （PERK）. Ultrastructural changes of ER and lamellar bodies in AT2 cells were observed by transmission electron microscopy （TEM）. The expression levels of key proteins involved in ER stress and apoptosis pathways， including PERK， activating transcription factor 4 （ATF4）， and Caspase-3， were detected by Western blot. Double immunofluorescence staining of SPC and Ki-67 antigen （Ki-67） was performed to evaluate the proliferative capacity of AT2 cells. Lineage tracing technology （labeling AT2 cells with GFP） combined with Krt8 labeling was used to evaluate intermediate differentiation states， and morphological transformation of AT2 cells into alveolar type Ⅰ epithelial cells （AT1） was observed. ResultsBLM-induced mice exhibited significant structural disruption of lung tissue， increased collagen deposition， elevated lung coefficient， decreased pulmonary function， and upregulation of fibrosis-related factors （P<0.01）. High-dose N2FBR treatment significantly ameliorated lung tissue damage and dysfunction， significantly reduced HYP content （P<0.01）， and significantly downregulated ColIa1， α-SMA， and Timp1 expression （P<0.01）. Apoptosis analysis showed increased TUNEL-positive and Caspase-3-positive AT2 cells in the model group， which was significantly reduced by high-dose N2FBR treatment. TEM revealed swollen ER structures in AT2 cells of the model group， which tended to return to normal following treatment. PERK protein staining analysis showed evident ER stress in AT2 cells of the model group， which were markedly alleviated in the treatment group. The expression levels of ER stress-related proteins PERK and ATF4， as well as the apoptosis-related protein Caspase-3， were elevated in the model group and significantly reduced after treatment. TEM also revealed disrupted lamellar body structures in the model group， which tended to recover in the treatment group. Regarding the proliferative capacity of AT2 cells， the proportion of Ki-67⁺SPC⁺ AT2 cells significantly increased in the treatment group （P<0.01）. Lineage tracing showed that the proportion of keratin 8-positive green fluorescent protein-positive （Krt8⁺GFP⁺） cells increased in the model group， indicating differentiation arrest. This proportion was significantly reduced in the treatment group， and the morphology of GFP⁺ cells exhibited a flattened， extended shape， suggesting restored differentiation toward AT1 cells. ConclusionN2FBR alleviates ER stress in AT2 cells， reduces AT2 cell apoptosis， restores lamellar body structure and function， enhances proliferation activity， and alleviates differentiation arrest to promote differentiation into AT1 cells， thereby repairing the alveolar epithelium and effectively blocking the progression of pulmonary fibrosis. Its traditional Chinese medicine mechanism of "replenishing Zong Qi， harmonizing Qi and blood， and unblocking pulmonary meridians" closely aligns with the modern regulatory pathway of AT2 stem cells， providing a novel theoretical basis and experimental evidence for the intervention of IPF with traditional Chinese medicine.

ObjectiveTo investigate the intervention mechanism of the traditional Chinese medicine Number 2 Feibi recipe （N2FBR） in idiopathic pulmonary fibrosis （IPF）， focusing on its effects on endoplasmic reticulum （ER） stress， apoptosis， stemness maintenance， and regenerative capacity of alveolar type Ⅱ epithelial cells （AT2 cells）， and to validate the modern translational pathway of the theory of "deficiency of Zong Qi leading to pulmonary atelectasis and atrophy". MethodsA mouse model of pulmonary fibrosis was induced by bleomycin （BLM）. Mice were randomly divided into blank control， model， low-， and high-dose N2FBR intervention groups （9.1， 18.2 g·kg^-1）， and prednisolone intervention group （6.5 mg·kg^-1）. Pulmonary histopathological changes and collagen deposition were evaluated using hematoxylin-eosin （HE） and Masson's trichrome staining. Hydroxyproline （HYP） content was measured by the alkaline hydrolysis method. Lung coefficient and pulmonary function parameters were evaluated. The mRNA expression levels of fibrosis-related factors， including collagen type Ⅰ alpha 1 chain （ColIa1）， alpha-smooth muscle actin （α-SMA）， and tissue inhibitor of metalloproteinase 1 （Timp1）， were detected by real-time polymerase chain reaction （Real-time PCR）. Cell apoptosis was assessed using the terminal deoxynucleotidyl transferase dUTP nick-end labeling （TUNEL） assay. Apoptosis of AT2 cells was further evaluated by double immunofluorescence staining for surfactant protein C （SPC） and cysteine-aspartic protease-3 （Caspase-3）. Endoplasmic reticulum （ER） stress in AT2 cells was examined by double staining for SPC and protein kinase R-like endoplasmic reticulum kinase （PERK）. Ultrastructural changes of ER and lamellar bodies in AT2 cells were observed by transmission electron microscopy （TEM）. The expression levels of key proteins involved in ER stress and apoptosis pathways， including PERK， activating transcription factor 4 （ATF4）， and Caspase-3， were detected by Western blot. Double immunofluorescence staining of SPC and Ki-67 antigen （Ki-67） was performed to evaluate the proliferative capacity of AT2 cells. Lineage tracing technology （labeling AT2 cells with GFP） combined with Krt8 labeling was used to evaluate intermediate differentiation states， and morphological transformation of AT2 cells into alveolar type Ⅰ epithelial cells （AT1） was observed. ResultsBLM-induced mice exhibited significant structural disruption of lung tissue， increased collagen deposition， elevated lung coefficient， decreased pulmonary function， and upregulation of fibrosis-related factors （P<0.01）. High-dose N2FBR treatment significantly ameliorated lung tissue damage and dysfunction， significantly reduced HYP content （P<0.01）， and significantly downregulated ColIa1， α-SMA， and Timp1 expression （P<0.01）. Apoptosis analysis showed increased TUNEL-positive and Caspase-3-positive AT2 cells in the model group， which was significantly reduced by high-dose N2FBR treatment. TEM revealed swollen ER structures in AT2 cells of the model group， which tended to return to normal following treatment. PERK protein staining analysis showed evident ER stress in AT2 cells of the model group， which were markedly alleviated in the treatment group. The expression levels of ER stress-related proteins PERK and ATF4， as well as the apoptosis-related protein Caspase-3， were elevated in the model group and significantly reduced after treatment. TEM also revealed disrupted lamellar body structures in the model group， which tended to recover in the treatment group. Regarding the proliferative capacity of AT2 cells， the proportion of Ki-67⁺SPC⁺ AT2 cells significantly increased in the treatment group （P<0.01）. Lineage tracing showed that the proportion of keratin 8-positive green fluorescent protein-positive （Krt8⁺GFP⁺） cells increased in the model group， indicating differentiation arrest. This proportion was significantly reduced in the treatment group， and the morphology of GFP⁺ cells exhibited a flattened， extended shape， suggesting restored differentiation toward AT1 cells. ConclusionN2FBR alleviates ER stress in AT2 cells， reduces AT2 cell apoptosis， restores lamellar body structure and function， enhances proliferation activity， and alleviates differentiation arrest to promote differentiation into AT1 cells， thereby repairing the alveolar epithelium and effectively blocking the progression of pulmonary fibrosis. Its traditional Chinese medicine mechanism of "replenishing Zong Qi， harmonizing Qi and blood， and unblocking pulmonary meridians" closely aligns with the modern regulatory pathway of AT2 stem cells， providing a novel theoretical basis and experimental evidence for the intervention of IPF with traditional Chinese medicine.

BACKGROUND:Autologous bone,allogeneic bone or artificial bone has been used to promote bone defect repair in the clinic,but the rate of non-healing is still high.The key is to ignore the importance of periosteum in the bone healing process.In the early stage of the project,the project team constructed an electrospinning membrane loaded with vascular endothelial growth factor to highly simulate the intramembranous osteogenesis of natural periosteum at the bone defect site,which promoted bone regeneration to a certain extent.However,the injured area often faces the dilemma of severe inflammatory response mediated by macrophages and lack of seed cells,resulting in the risk of inactivation or diffusion of delivered biological factors.Therefore,it is necessary to further optimize and coordinate the immune regulation and angiogenesis functions of biomimetic periosteum to promote bone repair.OBJECTIVE:To investigate the physicochemical properties of stem cell-engineered bionic periosteum and its role in regulating the inflammatory microenvironment to promote bone repair.METHODS:By combining L-polylactic acid-based microsol electrospinning,type Ⅰ collagen self-assembly and gel stem cell transplantation technology,a bionic periosteum(M@C-B)was constructed,in which the core layer loaded with vascular endothelial growth factor and the shell layer delivered bone marrow mesenchymal stem cells to regulate the immune microenvironment of bone defects.The physicochemical properties of the periosteum were characterized by scanning electron microscopy,transmission electron microscopy,and Fourier transform infrared spectroscopy.A co-culture system was established between the bionic periosteum and macrophages,bone marrow mesenchymal stem cells and human umbilical vein endothelial cells to explore immune regulation and in vitro osteogenic and angiogenic abilities.Finally,the osteogenic properties of the stem cell engineered bionic periosteum were further verified in a rat femoral condyle defect model.RESULTS AND CONCLUSION:(1)Transmission electron microscopy results showed that the micro-sol electrospinning(MS)formed a distinct core-shell structure.Scanning electron microscopy indicated that after the assembly of the collagen-l artificial periosteum(M@C)on the surface of the vascular endothelial growth factor-loaded micro-sol,a distinct"spider web-like"fibrous structure was deposited.Infrared spectroscopy further confirmed the successful self-assembly of collagen-l.Release experiments demonstrated that the M@C group mitigated the burst release phenomenon compared to the MS group,maintaining internal vascular endothelial growth factor activity and sustained release.(2)Live/dead cell staining and CCK-8 assay showed that bone marrow mesenchymal stem cells proliferated well and survived on three types of artificial periosteum:MS,purely aligned poly(L-lactic acid)(PLLA)surface self-assembled collagen-l artificial periosteum(PLLA@C),and vascular endothelial growth factor-loaded micro-sol fiber surface self-assembled collagen-l-bone marrow mesenchymal stem cells artificial periosteum(M@C-B).Among them,the M@C-B group had the highest number of live cells and the fastest proliferation rate.(3)Alkaline phosphatase staining,alizarin red staining,and osteopontin immunofluorescence staining showed that the PLLA@C and M@C-B groups significantly promoted osteogenic differentiation of bone marrow mesenchymal stem cells.Angiogenesis experiments demonstrated that the vascular endothelial growth factor-loaded groups(MS and M@C-B)had longer blood vessel lengths and more reticular vascular-like structures with more cross-linked nodes,with the M@C-B group being the most prominent.(4)Immunofluorescence and flow cytometry showed that artificial periosteum in the M@C-B group significantly inhibited the pro-inflammatory macrophage phenotype and promoted the polarization of macrophages towards the anti-inflammatory M2 phenotype.(5)In vivo studies further confirmed that the M@C-B group showed superior bone mineral density,trabecular thickness,relative bone volume,and trabecular spacing compared to other groups.(6)These results indicate that bone marrow mesenchymal stem cell-engineered artificial periosteum,through the rapid regulation of the bone defect immune microenvironment by the collagen-l-bone marrow mesenchymal stem cells outer phase and the sustained release of vascular endothelial growth factor by the micro-sol electrospinning core-shell structure of the inner phase,synergistically promotes bone healing.

BACKGROUND:Autologous bone,allogeneic bone or artificial bone has been used to promote bone defect repair in the clinic,but the rate of non-healing is still high.The key is to ignore the importance of periosteum in the bone healing process.In the early stage of the project,the project team constructed an electrospinning membrane loaded with vascular endothelial growth factor to highly simulate the intramembranous osteogenesis of natural periosteum at the bone defect site,which promoted bone regeneration to a certain extent.However,the injured area often faces the dilemma of severe inflammatory response mediated by macrophages and lack of seed cells,resulting in the risk of inactivation or diffusion of delivered biological factors.Therefore,it is necessary to further optimize and coordinate the immune regulation and angiogenesis functions of biomimetic periosteum to promote bone repair.OBJECTIVE:To investigate the physicochemical properties of stem cell-engineered bionic periosteum and its role in regulating the inflammatory microenvironment to promote bone repair.METHODS:By combining L-polylactic acid-based microsol electrospinning,type Ⅰ collagen self-assembly and gel stem cell transplantation technology,a bionic periosteum(M@C-B)was constructed,in which the core layer loaded with vascular endothelial growth factor and the shell layer delivered bone marrow mesenchymal stem cells to regulate the immune microenvironment of bone defects.The physicochemical properties of the periosteum were characterized by scanning electron microscopy,transmission electron microscopy,and Fourier transform infrared spectroscopy.A co-culture system was established between the bionic periosteum and macrophages,bone marrow mesenchymal stem cells and human umbilical vein endothelial cells to explore immune regulation and in vitro osteogenic and angiogenic abilities.Finally,the osteogenic properties of the stem cell engineered bionic periosteum were further verified in a rat femoral condyle defect model.RESULTS AND CONCLUSION:(1)Transmission electron microscopy results showed that the micro-sol electrospinning(MS)formed a distinct core-shell structure.Scanning electron microscopy indicated that after the assembly of the collagen-l artificial periosteum(M@C)on the surface of the vascular endothelial growth factor-loaded micro-sol,a distinct"spider web-like"fibrous structure was deposited.Infrared spectroscopy further confirmed the successful self-assembly of collagen-l.Release experiments demonstrated that the M@C group mitigated the burst release phenomenon compared to the MS group,maintaining internal vascular endothelial growth factor activity and sustained release.(2)Live/dead cell staining and CCK-8 assay showed that bone marrow mesenchymal stem cells proliferated well and survived on three types of artificial periosteum:MS,purely aligned poly(L-lactic acid)(PLLA)surface self-assembled collagen-l artificial periosteum(PLLA@C),and vascular endothelial growth factor-loaded micro-sol fiber surface self-assembled collagen-l-bone marrow mesenchymal stem cells artificial periosteum(M@C-B).Among them,the M@C-B group had the highest number of live cells and the fastest proliferation rate.(3)Alkaline phosphatase staining,alizarin red staining,and osteopontin immunofluorescence staining showed that the PLLA@C and M@C-B groups significantly promoted osteogenic differentiation of bone marrow mesenchymal stem cells.Angiogenesis experiments demonstrated that the vascular endothelial growth factor-loaded groups(MS and M@C-B)had longer blood vessel lengths and more reticular vascular-like structures with more cross-linked nodes,with the M@C-B group being the most prominent.(4)Immunofluorescence and flow cytometry showed that artificial periosteum in the M@C-B group significantly inhibited the pro-inflammatory macrophage phenotype and promoted the polarization of macrophages towards the anti-inflammatory M2 phenotype.(5)In vivo studies further confirmed that the M@C-B group showed superior bone mineral density,trabecular thickness,relative bone volume,and trabecular spacing compared to other groups.(6)These results indicate that bone marrow mesenchymal stem cell-engineered artificial periosteum,through the rapid regulation of the bone defect immune microenvironment by the collagen-l-bone marrow mesenchymal stem cells outer phase and the sustained release of vascular endothelial growth factor by the micro-sol electrospinning core-shell structure of the inner phase,synergistically promotes bone healing.

Objective: To explore the therapeutic effects of different surgical methods for temporomandibular joint disc reduction and anchoring surgery, providing reference for optimizing this surgical procedure. Method: The study was approved by the hospital ethics committee. 173 patients (195 joints) who underwent temporomandibular joint disc repositioning and anchoring surgery were selected for retrospective analysis. Patients were categorized into groups A (traditional preauricular incision-scalpel/tissue scissors anterior attachment release), 35 patients (40 joints), B (traditional preauricular incision-plasma bipolar radiofrequency electrode anterior attachment release), 42 patients (46 joints), C (revised tragus incision - scalpel/tissue scissors anterior attachment release), 50 patients (58 joints), and D (revised tragus incision-plasma bipolar radiofrequency electrode anterior attachment release), 46 patients (51 joints). After a 6-month postoperative follow-up, the differences in maximum mouth opening (MMO), visual analogue scale (VAS), effective rate of joint disc reduction, incidence of preauricular numbness, obvious scars among patients in each group at 1, 3, and 6 months were compared postoperatively. Results: After surgery, the MMO of all four groups of patients initially shrunk and then gradually increased compared to before surgery. At the 1-month follow-up after surgery, the plasma bipolar radiofrequency release (B+D) group had a smaller impact on the patient’s MMO compared to the surgical knife/tissue scissors release (A+C) group (P < 0.05). Postoperative VAS scores for all four groups showed a gradual decrease from pre-operative levels, with the (B+D) group scoring significantly lower in the first month post-surgery compared to the (A+C) group (P < 0.05). Six months post-surgery, the rate of joint disc reduction of the four groups were higher than 95%, with no significant differences observed between the groups (P > 0.05). Patients in the revised tragus incision (C+D) group experienced a lower rate of preauricular numbness compared to those in the traditional preauricular incision (A+B) group (4.59% vs. 12.79%, P < 0.05), The incidence of obvious scars in the (C+D) group was significantly lower than that in the (A+B) group (3.67% vs. 23.26%, P < 0.05). Conclusion The revised tragus incision is superior to traditional preauricular incision in terms of protecting the auriculotemporal nerve and the scars were more inconspicuous. Further, the plasma bipolar radiofrequency electrode is superior to the scalpel/tissue scissors in terms of mouth opening recovery and pain control. For temporomandibular joint disc reduction and anchoring surgery, a modified tragus incision combined with plasma bipolar radiofrequency electrode to release the anterior attachment of the joint disc can be recommended as a surgical option.

BACKGROUND:The use of 3D-printed patient-specific instruments in opening wedge high tibial osteotomy has advantages such as shorter operative time,fewer fluoroscopic exposures,and higher correction accuracy.However,previous studies have reported issues such as significant damage to surrounding soft tissues and improper fixation of the plates. OBJECTIVE:To investigate the clinical efficacy of using 3D-printed patient-specific instruments combined with customized locking plate in opening wedge high tibial osteotomy for the treatment of knee osteoarthritis. METHODS:A total of 20 patients diagnosed with knee osteoarthritis were divided into the 3D group(n=10)and the conventional group(n=10)according to surgical methods.The 3D group underwent opening wedge high tibial osteotomy using 3D-printed patient-specific instruments combined with customized locking plate,while the conventional group underwent opening wedge high tibial osteotomy using conventional methods.The operative time,fluoroscopic exposures,incision length,pre-and postoperative hip-knee-ankle angle,medial proximal tibial angle,posterior tibial slope,the difference between the planned and actual correction angle,preoperative and 1,3,6 months postoperative knee range of motion and Lysholm score,and incidence of complications were analyzed and compared between the two groups. RESULTS AND CONCLUSION:(1)The operative time and fluoroscopic exposures were significantly shorter in the 3D group compared to the conventional group,with a statistically significant difference(P<0.001).(2)Both groups showed a significant improvement in postoperative hip-knee-ankle angle and medial proximal tibial angle compared to preoperative values,with a statistically significant difference(P<0.001),while there was no significant change in posterior tibial slope.In the 3D group,the postoperative hip-knee-ankle angle,medial proximal tibial angle,and posterior tibial slope differed from their respective preoperative planned values by(-0.22±0.72)°,(-0.20±0.73)°,and(0.23±0.37)°,but the differences were not statistically significant.The difference between the planned and actual correction angle of 3D group was significantly smaller than that of conventional group(P<0.05).(3)Both groups showed a gradual increase in knee range of motion and Lysholm scores after surgery(P<0.001).Compared to the conventional group,the 3D group had superior knee range of motion at 1 and 3 months postoperatively,as well as a higher Lysholm score at 1 month postoperatively,with statistically significant differences(P<0.05).There were no statistically significant differences in Lysholm score at 3 months and knee range of motion and Lysholm score at 6 months between the two groups(P>0.05).(4)Complications occurred in neither groups.(5)The above results indicate that both 3D-printed patient-specific instruments combined with customized locking plate and conventional methods have good clinical efficacy.However,the former has a shorter operative time,fewer fluoroscopic exposures,and faster postoperative recovery of knee joint function.Additionally,3D-printed patient-specific instruments can achieve preoperative planning accurately.

Five new flavan-4-ol glycosides jixueqiosides A-E (1-5) and two new flavan glycosides jixueqiosides F and G (6 and 7), along with twelve known flavan-4-ol glycosides (8-19), were isolated from the roots of Pronephrium penangianum. Comprehensive spectral analyses, X-ray single-crystal diffraction, and theoretical electronic circular dichroism (ECD) calculations established structures and absolute configurations. A single crystal structure of flavan-4-ol glycoside (14) was reported for the first time, while the characteristic ECD and NMR data for all isolated flavan-4-ol glycosides (1-5 , 8-19) were analyzed, establishing a set of empirical rules. Activity screening of these isolates showed that 8 and 9 could inhibit the proliferation of MDA-MB-231 and MCF-7 cells with IC₅₀ values of 7.93 ? 2.85 ?mol?L^-1 and 5.87 ? 1.58 ?mol?L^-1 (MDA-MB-231), and 2.21 ? 1.38 ?mol?L^-1 and 3.52 ? 1.55 ?mol?L^-1 (MCF-7), respectively. Western blotting and flow cytometry analyses demonstrated that 8 and 9 dose-dependently induced apoptosis in MDA-MB-231 cells by up-regulating BAX, activating caspase-3 and down-regulating BCL-2. Additionally, compound 8 affected autophagy-related proteins, increasing the ratio of LC3-II/LC3-I and Beclin-1 levels to inhibit MDA-MB-231 cell proliferation. Moreover, anti-inflammatory studies indicated that 2, 3, 7, 13, 14, and 18 moderately inhibited tumor necrosis factor-a (TNF-a), interleukin-6 (IL-6), and nitric oxide (NO) release.
Humans ; Plant Roots/chemistry* ; Glycosides/isolation & purification* ; Anti-Inflammatory Agents/isolation & purification* ; Flavonoids/isolation & purification* ; Cell Proliferation/drug effects* ; Antineoplastic Agents, Phytogenic/isolation & purification* ; Molecular Structure ; Apoptosis/drug effects* ; Cell Line, Tumor ; Tumor Necrosis Factor-alpha/immunology* ; Drugs, Chinese Herbal/pharmacology* ; Interleukin-6/immunology* ; Animals ; Mice

Gastric cancer with peritoneal metastasis (GCPM) is a common and lethal manifestation of advanced gastric cancer, with a median survival of only 5-11 months. This consensus was developed by 30 experts from Asia (China, Japan, Korea, and Singapore) using the Delphi method and the GRADE evidence grading system. A total of 29 statements were formulated, covering the diagnosis and assessment of GCPM, indications for laparoscopic exploration and NIPS (normothermic intraperitoneal and systemic treatment), treatment regimens, prevention and management of complications, criteria for conversion surgery, and postoperative intraperitoneal therapy. The consensus aims to standardize clinical practice and improve the prognosis of patients with GCPM.

Objective:To compare the efficacy of various machine learning models in predicting renal function decline after robot-assisted partial nephrectomy(RAPN),and to provide evidence for clinical risk stratification.Methods:This study retrospectively in-cluded the clinical data of 733 patients with renal cell carcinoma undergoing RAPN at the Urology Department of The First Affiliated Hospital of Chongqing Medical University from January 2019 to December 2023.Demographic characteristics,laboratory indicators,and perioperative parameters were integrated to construct seven machine learning models.Key predictors were interpreted using Shap-ley additive explanations(SHAP).Model performance was evaluated using the area under the receiver operating characteristic curve(AUC).Results:The random forest model demonstrated the best predictive performance(AUC=0.84).SHAP analysis identified neutrophil-to-lymphocyte ratio,tumor diameter,the international normalized ratio of prothrombin time,white blood cell count,and in-traoperative blood loss as significant factors influencing postoperative renal function decline.Conclusion:This study provides a poten-tial predictive tool for clinical practice,aiding in identifying high-risk patients and optimizing postoperative management strategies.