Background and Objectives: Pediatric chronic rhinosinusitis (CRS) significantly affects children’s quality of life and learning abilities. This study aimed to evaluate the postoperative outcomes in pediatric patients who underwent functional endoscopic sinus surgery (FESS) for CRS. Methods: A retrospective review was conducted on pediatric patients who underwent FESS for CRS at 11 university hospitals. The inclusion criteria were patients under 20 years old with bilateral disease who were operated on between January 2005 and December 2021. The data collected included demographics, clinical history, blood tests, preoperative computed tomography, and preoperative and postoperative symptom control. The Kruskal-Wallis and Fisher exact tests were used to compare the quantitative and qualitative data, respectively. Results: In total, 213 patients were enrolled. The mean age was 13.4±3.0 years, and 145 (68.1%) were male. One hundred sixty-four patients (77.0%) had nasal polyps and 33 patients (15.5%) underwent revision FESS. The preoperative symptoms, in order of prevalence, included nasal obstruction (87.8%), rhinorrhea (71.8%), a sense of postnasal drip (58.2%), hyposmia (44.6%), cough (24.4%), and facial fullness (18.3%). These symptoms were significantly alleviated for up to 3 years after surgery (p<0.001). At the time of the last follow-up, 121 patients (56.8%) were controlled, 80 (37.6%) were partly controlled, and 12 (5.6%) were uncontrolled. Patients in the uncontrolled group had higher Lund-Mackay scores, longer follow-up durations, and more instances of revision surgery compared to those in the controlled and partly controlled groups. When age was categorized into three groups, those aged 16 years or older tended to have lower Lund-Mackay scores and better control. Conclusion FESS significantly improves both the postoperative symptoms and the long-term quality of life in pediatric CRS patients. Better symptom control is associated with older age and a lower disease burden.

Background and Objectives: Pediatric chronic rhinosinusitis (CRS) significantly affects children’s quality of life and learning abilities. This study aimed to evaluate the postoperative outcomes in pediatric patients who underwent functional endoscopic sinus surgery (FESS) for CRS. Methods: A retrospective review was conducted on pediatric patients who underwent FESS for CRS at 11 university hospitals. The inclusion criteria were patients under 20 years old with bilateral disease who were operated on between January 2005 and December 2021. The data collected included demographics, clinical history, blood tests, preoperative computed tomography, and preoperative and postoperative symptom control. The Kruskal-Wallis and Fisher exact tests were used to compare the quantitative and qualitative data, respectively. Results: In total, 213 patients were enrolled. The mean age was 13.4±3.0 years, and 145 (68.1%) were male. One hundred sixty-four patients (77.0%) had nasal polyps and 33 patients (15.5%) underwent revision FESS. The preoperative symptoms, in order of prevalence, included nasal obstruction (87.8%), rhinorrhea (71.8%), a sense of postnasal drip (58.2%), hyposmia (44.6%), cough (24.4%), and facial fullness (18.3%). These symptoms were significantly alleviated for up to 3 years after surgery (p<0.001). At the time of the last follow-up, 121 patients (56.8%) were controlled, 80 (37.6%) were partly controlled, and 12 (5.6%) were uncontrolled. Patients in the uncontrolled group had higher Lund-Mackay scores, longer follow-up durations, and more instances of revision surgery compared to those in the controlled and partly controlled groups. When age was categorized into three groups, those aged 16 years or older tended to have lower Lund-Mackay scores and better control. Conclusion FESS significantly improves both the postoperative symptoms and the long-term quality of life in pediatric CRS patients. Better symptom control is associated with older age and a lower disease burden.

Background and Objectives: Pediatric chronic rhinosinusitis (CRS) significantly affects children’s quality of life and learning abilities. This study aimed to evaluate the postoperative outcomes in pediatric patients who underwent functional endoscopic sinus surgery (FESS) for CRS. Methods: A retrospective review was conducted on pediatric patients who underwent FESS for CRS at 11 university hospitals. The inclusion criteria were patients under 20 years old with bilateral disease who were operated on between January 2005 and December 2021. The data collected included demographics, clinical history, blood tests, preoperative computed tomography, and preoperative and postoperative symptom control. The Kruskal-Wallis and Fisher exact tests were used to compare the quantitative and qualitative data, respectively. Results: In total, 213 patients were enrolled. The mean age was 13.4±3.0 years, and 145 (68.1%) were male. One hundred sixty-four patients (77.0%) had nasal polyps and 33 patients (15.5%) underwent revision FESS. The preoperative symptoms, in order of prevalence, included nasal obstruction (87.8%), rhinorrhea (71.8%), a sense of postnasal drip (58.2%), hyposmia (44.6%), cough (24.4%), and facial fullness (18.3%). These symptoms were significantly alleviated for up to 3 years after surgery (p<0.001). At the time of the last follow-up, 121 patients (56.8%) were controlled, 80 (37.6%) were partly controlled, and 12 (5.6%) were uncontrolled. Patients in the uncontrolled group had higher Lund-Mackay scores, longer follow-up durations, and more instances of revision surgery compared to those in the controlled and partly controlled groups. When age was categorized into three groups, those aged 16 years or older tended to have lower Lund-Mackay scores and better control. Conclusion FESS significantly improves both the postoperative symptoms and the long-term quality of life in pediatric CRS patients. Better symptom control is associated with older age and a lower disease burden.

Objectives: Estimating the number of deaths caused by smoking is crucial for developing and evaluating tobacco control and smoking cessation policies. This study aimed to determine smoking-attributable mortality (SAM) in Korea in 2020. Methods: Four large-scale cohorts from Korea were analyzed. A Cox proportional-hazards model was used to determine the hazard ratios (HRs) of smoking-related death. By conducting a meta-analysis of these HRs, the pooled HRs of smoking-related death for 41 diseases were estimated. Population-attributable fractions (PAFs) were calculated based on the smoking prevalence for 1995 in conjunction with the pooled HRs. Subsequently, SAM was derived using the PAF and the number of deaths recorded for each disease in 2020. Results: The pooled HR for all-cause mortality attributable to smoking was 1.73 for current men smokers (95% confidence interval [CI], 1.53 to 1.95) and 1.63 for current women smokers (95% CI, 1.37 to 1.94). Smoking accounted for 33.2% of all-cause deaths in men and 4.6% in women. Additionally, it was a factor in 71.8% of men lung cancer deaths and 11.9% of women lung cancer deaths. In 2020, smoking was responsible for 53 930 men deaths and 6283 women deaths, totaling 60 213 deaths. Conclusions Cigarette smoking was responsible for a significant number of deaths in Korea in 2020. Monitoring the impact and societal burden of smoking is essential for effective tobacco control and harm prevention policies.

The remarkable advances in our understanding of renal tumor pathogenesis, driven by the widespread application of molecular testing, are reflected in the latest 2022 World Health Organization classification. This updated classification categorizes renal cell carcinoma (RCC) into morphologically and molecularly defined RCCs. It includes updates to existing entities and introduces newly established and provisional entities. A standard macroscopic and microscopic evaluation is typically sufficient for diagnosing morphologically defined RCCs and serves as the initial step in the identification of molecularly defined entities. In cases where classification based solely on histologic examination is challenging, a limited panel of immunohistochemical stains can be employed to aid in the diagnosis, with molecular testing for validation if necessary. Therefore, this review explores the key clinical, pathological, and molecular features essential for classifying both the commonly encountered morphologically defined RCCs and the less common but clinically significant molecularly defined RCCs. The goal is to increase awareness of these RCC subtypes among clinicians and promote a deeper understanding of the pathological diagnostic process, ultimately improving patient care.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Background: Bulky or multiple lymph node (LN) metastases are associated with poor prognosis in cervical cancer, and the size or number of LN metastases is not yet reflected in the staging system and therapeutic strategy. Although the therapeutic effects of surgical resection of bulky LNs before standard treatment have been reported in several retrospective studies, wellplanned randomized clinical studies are lacking. Therefore, the aim of the Korean Gynecologic Oncology Group (KGOG) 1047/DEBULK trial is to investigate whether the debulking surgery of bulky or multiple LNs prior to concurrent chemoradiation therapy (CCRT) improves the survival rate of patients with cervical cancer IIICr diagnosed by imaging tests. Methods The KGOG 1047/DEBULK trial is a phase III, multicenter, randomized clinical trial involving patients with bulky or multiple LN metastases in cervical cancer IIICr. This study will include patients with a short-axis diameter of a pelvic or para-aortic LN ≥2 cm or ≥3 LNs with a short-axis diameter ≥1 cm and for whom CCRT is planned. The treatment arms will be randomly allocated in a 1:1 ratio to either receive CCRT (control arm) or undergo surgical debulking of bulky or multiple LNs before CCRT (experimental arm). CCRT consists of extended-field external beam radiotherapy/pelvic radiotherapy, brachytherapy and LN boost, and weekly chemotherapy with cisplatin (40 mg/m 2 ), 4–6 times administered intravenously.The primary endpoint will be 3-year progression-free survival rate. The secondary endpoints will be 3-year overall survival rate, treatment-related complications, and accuracy of radiological diagnosis of bulky or multiple LNs.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.