Neoadjuvant therapy has become the standard treatment for locally advanced resectable esophageal cancer, significantly improving long-term survival compared to surgery alone. Neoadjuvant therapy has evolved to include various strategies, such as concurrent chemoradiotherapy, chemotherapy, immunotherapy, or targeted combination therapy. This enriches clinical treatment options and provides a more personalized and scientific treatment approach for patients. This article aims to comprehensively summarize current academic research hot topics, review the rationale and evaluation measures of neoadjuvant therapy, discuss challenges in restaging methods after neoadjuvant therapy, and identify the advantages and disadvantages of various neoadjuvant therapeutic strategies.

Objective: To explore the therapeutic effects of different surgical methods for temporomandibular joint disc reduction and anchoring surgery, providing reference for optimizing this surgical procedure. Method: The study was approved by the hospital ethics committee. 173 patients (195 joints) who underwent temporomandibular joint disc repositioning and anchoring surgery were selected for retrospective analysis. Patients were categorized into groups A (traditional preauricular incision-scalpel/tissue scissors anterior attachment release), 35 patients (40 joints), B (traditional preauricular incision-plasma bipolar radiofrequency electrode anterior attachment release), 42 patients (46 joints), C (revised tragus incision - scalpel/tissue scissors anterior attachment release), 50 patients (58 joints), and D (revised tragus incision-plasma bipolar radiofrequency electrode anterior attachment release), 46 patients (51 joints). After a 6-month postoperative follow-up, the differences in maximum mouth opening (MMO), visual analogue scale (VAS), effective rate of joint disc reduction, incidence of preauricular numbness, obvious scars among patients in each group at 1, 3, and 6 months were compared postoperatively. Results: After surgery, the MMO of all four groups of patients initially shrunk and then gradually increased compared to before surgery. At the 1-month follow-up after surgery, the plasma bipolar radiofrequency release (B+D) group had a smaller impact on the patient’s MMO compared to the surgical knife/tissue scissors release (A+C) group (P < 0.05). Postoperative VAS scores for all four groups showed a gradual decrease from pre-operative levels, with the (B+D) group scoring significantly lower in the first month post-surgery compared to the (A+C) group (P < 0.05). Six months post-surgery, the rate of joint disc reduction of the four groups were higher than 95%, with no significant differences observed between the groups (P > 0.05). Patients in the revised tragus incision (C+D) group experienced a lower rate of preauricular numbness compared to those in the traditional preauricular incision (A+B) group (4.59% vs. 12.79%, P < 0.05), The incidence of obvious scars in the (C+D) group was significantly lower than that in the (A+B) group (3.67% vs. 23.26%, P < 0.05). Conclusion The revised tragus incision is superior to traditional preauricular incision in terms of protecting the auriculotemporal nerve and the scars were more inconspicuous. Further, the plasma bipolar radiofrequency electrode is superior to the scalpel/tissue scissors in terms of mouth opening recovery and pain control. For temporomandibular joint disc reduction and anchoring surgery, a modified tragus incision combined with plasma bipolar radiofrequency electrode to release the anterior attachment of the joint disc can be recommended as a surgical option.

BACKGROUND:The use of 3D-printed patient-specific instruments in opening wedge high tibial osteotomy has advantages such as shorter operative time,fewer fluoroscopic exposures,and higher correction accuracy.However,previous studies have reported issues such as significant damage to surrounding soft tissues and improper fixation of the plates. OBJECTIVE:To investigate the clinical efficacy of using 3D-printed patient-specific instruments combined with customized locking plate in opening wedge high tibial osteotomy for the treatment of knee osteoarthritis. METHODS:A total of 20 patients diagnosed with knee osteoarthritis were divided into the 3D group(n=10)and the conventional group(n=10)according to surgical methods.The 3D group underwent opening wedge high tibial osteotomy using 3D-printed patient-specific instruments combined with customized locking plate,while the conventional group underwent opening wedge high tibial osteotomy using conventional methods.The operative time,fluoroscopic exposures,incision length,pre-and postoperative hip-knee-ankle angle,medial proximal tibial angle,posterior tibial slope,the difference between the planned and actual correction angle,preoperative and 1,3,6 months postoperative knee range of motion and Lysholm score,and incidence of complications were analyzed and compared between the two groups. RESULTS AND CONCLUSION:(1)The operative time and fluoroscopic exposures were significantly shorter in the 3D group compared to the conventional group,with a statistically significant difference(P<0.001).(2)Both groups showed a significant improvement in postoperative hip-knee-ankle angle and medial proximal tibial angle compared to preoperative values,with a statistically significant difference(P<0.001),while there was no significant change in posterior tibial slope.In the 3D group,the postoperative hip-knee-ankle angle,medial proximal tibial angle,and posterior tibial slope differed from their respective preoperative planned values by(-0.22±0.72)°,(-0.20±0.73)°,and(0.23±0.37)°,but the differences were not statistically significant.The difference between the planned and actual correction angle of 3D group was significantly smaller than that of conventional group(P<0.05).(3)Both groups showed a gradual increase in knee range of motion and Lysholm scores after surgery(P<0.001).Compared to the conventional group,the 3D group had superior knee range of motion at 1 and 3 months postoperatively,as well as a higher Lysholm score at 1 month postoperatively,with statistically significant differences(P<0.05).There were no statistically significant differences in Lysholm score at 3 months and knee range of motion and Lysholm score at 6 months between the two groups(P>0.05).(4)Complications occurred in neither groups.(5)The above results indicate that both 3D-printed patient-specific instruments combined with customized locking plate and conventional methods have good clinical efficacy.However,the former has a shorter operative time,fewer fluoroscopic exposures,and faster postoperative recovery of knee joint function.Additionally,3D-printed patient-specific instruments can achieve preoperative planning accurately.

BACKGROUND:Black phosphorus has a high degree of homology with human bone,so it has been extensively studied in the field of bone tissue engineering in recent years.Since 2014,two-dimensional black phosphorus materials have garned significant attention in the field of biomedicine due to their excellent exceptional physical,chemical,and biological properties. OBJECTIVE:To summarize the advancements made in black phosphorus-based nanomaterials for bone tissue engineering,focus on the synthesis methods,osteogenic characteristics,and applications in biomaterials pertaining to two-dimensional black phosphorus nanomaterials. METHODS:Chinese and English key words were"black phosphorus,bone tissue engineering,bone defect,bone regeneration,osteogenesis."Relevant articles in PubMed and CNKI databases from January 2014 to December 2023 were searched.After exclusion and screening,96 articles were analyzed. RESULTS AND CONCLUSION:Black phosphorus nanomaterials play an important role in bone tissue engineering due to their good biocompatibility,biodegradability,photothermal action,antibacterial ability,drug loading performance,and special osteogenic effect,and are ideal candidate materials for promoting bone regeneration.The preparation of black phosphorus nanomaterials is mainly a top-down top-layer stripping method.The main principle is to weaken the van der Waals force between the black phosphorus layers by physical or chemical means to obtain a single or less layer of phosphanse,that is,black phosphorus nanosheets or quantum dots.Black phosphate-based nanocomposites are mainly divided into hydrogels,3D printing scaffolds,composite scaffolds,electrospinning,bionic periosteum,microspheres,and bionic coatings.The research of nano-black phosphorus in bone tissue engineering is in its infancy,and still faces many challenges:the behavior of black phosphorus in vivo and the interaction mechanism with various biomolecules need to be further studied.The long-term potential toxicity of black phosphorus is unknown.The manufacturing process for black phosphorus is difficult to control.Therefore,how to develop uniform size,safe,reliable,and efficient nano black phosphorus and transform it into clinical application requires interdisciplinary research on modern biomedical technology,physicochemical technology,and precision manufacturing technology.

BACKGROUND:Human periodontal ligament stem cells are potential functional cells for periodontal tissue engineering.However,long-term in vitro culture may lead to reduced stemness and replicative senescence of periodontal ligament stem cells,which may impair the therapeutic effect of human periodontal ligament stem cells. OBJECTIVE:To investigate the effect of oxymatrine on the stemness maintenance and osteogenic differentiation of periodontal ligament stem cells in vitro,and to explore the potential mechanism. METHODS:Periodontal ligament stem cells were isolated from human periodontal ligament tissues by tissue explant enzyme digestion and cultured.The surface markers of mesenchymal cells were identified by flow cytometry.Periodontal ligament stem cells were incubated with 0,2.5,5,and 10 μg/mL oxymatrine.The effect of oxymatrine on the proliferation activity of periodontal ligament stem cells was detected by CCK8 assay.The appropriate drug concentration for subsequent experiments was screened.Western blot assay was used to detect the expression of stem cell non-specific proteins SOX2 and OCT4 in periodontal ligament stem cells.qRT-PCR and western blot assay were used to detect the expression levels of related osteogenic genes and proteins in periodontal ligament stem cells. RESULTS AND CONCLUSION:(1)The results of CCK8 assay showed that 2.5 μg/mL oxymatrine significantly enhanced the proliferative activity of periodontal stem cells,and the subsequent experiment selected 2.5 μg/mL oxymatrine to intervene.(2)Compared with the blank control group,the protein expression level of SOX2,a stem marker of periodontal ligament stem cells in the oxymatrine group did not change significantly(P>0.05),and the expression of OCT4 was significantly up-regulated(P<0.05).(3)Compared with the osteogenic induction group,the osteogenic genes ALP,RUNX2 mRNA expression and their osteogenic associated protein ALP protein expression of periodontal ligament stem cells were significantly down-regulated in the oxymatrine+osteogenic induction group(P<0.05).(4)The oxymatrine up-regulated the expression of stemness markers of periodontal ligament stem cells and inhibited the bone differentiation of periodontal ligament stem cells,and the results of high-throughput sequencing showed that it may be associated with WNT2,WNT16,COMP,and BMP6.

Objective:To evaluate the clinical outcomes of combined complete preservation of chordal structure mitral valve replacement (C-MVR) with total anatomical arterial myocardial revascularization (TACR) in coronary patients with moderate-to-severe or severe ischemic mitral regurgitation (IMR).Methods:This is a retrospective multi-center case series study. Data were retrospectively collected from 127 patients with coronary artery disease with moderate to severe or severe IMR who received TACR with C-MVR from July 2015 to April 2024 in 13 hospitals in China. There were 90 males and 37 females, aged (56.5±10.7) years (range: 33 to 74 years). Perioperative data and follow-up data including left ventricular ejection fraction, left ventricular end-diastolic diameter, and patency rate of arterial grafts of patients were collected. Comparisons were made using paired sample t-test or χ2 test. Results:In this cohort of 127 patients, 67 underwent concurrent tricuspid valve repair. During surgery, 113 grafts of the left internal mammary artery (LIMA), 127 grafts of the left radial artery, 80 grafts of the right radial artery, and 110 grafts of the right internal mammary artery (RIMA) were harvested. The number of the distal anastomosis was 4.2±0.4 (range: 3 to 5). The aortic cross-clamp time and cardiopulmonary bypass time were (97.5±23.4) minutes (range: 90 to 161 minutes) and (145.4±19.2) minutes (range: 101 to 210 minutes), respectively. There was one operative death. Intraoperative placement of an intra-aortic balloon pump was performed in 21 patients to improve the left ventricular ejection. No sternal ischemic occurred. All patients completed follow-up, with a mean follow-up period of (64.3±7.5) months (range: 4 to 110 months). No major cerebrovascular events occurred during the follow-up period, and all patients survived. Left ventricular ejection fraction improved postoperatively (55.0%±5.3% vs. 41.0%±15.3%, t=17.23, P<0.01). The proportion of patients with New York Heart Association functional class ≤2 increased postoperatively (23.6% (30/127) vs. 87.3% (110/126), χ2=103.77, P<0.01). The proportion of patients with Canadian Cardiovascular Society Angina Classification ≤3 decreased postoperatively (4.8% (6/126) vs. 78.7% (100/127), χ2=142.19, P<0.01). The left ventricular end-diastolic diameter decreased postoperatively ((5.70±4.50) cm vs. (6.10±0.23) cm, t=12.15, P<0.01). Coronary multi-detector computed tomography angiography (MDCTA) follow-up was conducted for (60.5±11.7) months (range: 6 to 109 months) postoperatively. MDCTA confirmed the patency rates of the grafts: 96.4% (108/112) for the LIMA grafts, 88.9% (112/126) for the left radial artery grafts, 93.7% (74/79) for the right radial artery grafts, and 90.9% (100/110) for the free RIMA grafts. No significant differences in graft patency rates were observed between the arterial grafts ( χ2=5.24, P=0.155). Conclusion:The results of this multi-centre study demonstrate satisfactory mid-term results of C-MVR with TACR for the treatment of coronary artery disease with moderate to severe or severe IMR.

Objective:To evaluate the clinical outcomes of combined complete preservation of chordal structure mitral valve replacement (C-MVR) with total anatomical arterial myocardial revascularization (TACR) in coronary patients with moderate-to-severe or severe ischemic mitral regurgitation (IMR).Methods:This is a retrospective multi-center case series study. Data were retrospectively collected from 127 patients with coronary artery disease with moderate to severe or severe IMR who received TACR with C-MVR from July 2015 to April 2024 in 13 hospitals in China. There were 90 males and 37 females, aged (56.5±10.7) years (range: 33 to 74 years). Perioperative data and follow-up data including left ventricular ejection fraction, left ventricular end-diastolic diameter, and patency rate of arterial grafts of patients were collected. Comparisons were made using paired sample t-test or χ2 test. Results:In this cohort of 127 patients, 67 underwent concurrent tricuspid valve repair. During surgery, 113 grafts of the left internal mammary artery (LIMA), 127 grafts of the left radial artery, 80 grafts of the right radial artery, and 110 grafts of the right internal mammary artery (RIMA) were harvested. The number of the distal anastomosis was 4.2±0.4 (range: 3 to 5). The aortic cross-clamp time and cardiopulmonary bypass time were (97.5±23.4) minutes (range: 90 to 161 minutes) and (145.4±19.2) minutes (range: 101 to 210 minutes), respectively. There was one operative death. Intraoperative placement of an intra-aortic balloon pump was performed in 21 patients to improve the left ventricular ejection. No sternal ischemic occurred. All patients completed follow-up, with a mean follow-up period of (64.3±7.5) months (range: 4 to 110 months). No major cerebrovascular events occurred during the follow-up period, and all patients survived. Left ventricular ejection fraction improved postoperatively (55.0%±5.3% vs. 41.0%±15.3%, t=17.23, P<0.01). The proportion of patients with New York Heart Association functional class ≤2 increased postoperatively (23.6% (30/127) vs. 87.3% (110/126), χ2=103.77, P<0.01). The proportion of patients with Canadian Cardiovascular Society Angina Classification ≤3 decreased postoperatively (4.8% (6/126) vs. 78.7% (100/127), χ2=142.19, P<0.01). The left ventricular end-diastolic diameter decreased postoperatively ((5.70±4.50) cm vs. (6.10±0.23) cm, t=12.15, P<0.01). Coronary multi-detector computed tomography angiography (MDCTA) follow-up was conducted for (60.5±11.7) months (range: 6 to 109 months) postoperatively. MDCTA confirmed the patency rates of the grafts: 96.4% (108/112) for the LIMA grafts, 88.9% (112/126) for the left radial artery grafts, 93.7% (74/79) for the right radial artery grafts, and 90.9% (100/110) for the free RIMA grafts. No significant differences in graft patency rates were observed between the arterial grafts ( χ2=5.24, P=0.155). Conclusion:The results of this multi-centre study demonstrate satisfactory mid-term results of C-MVR with TACR for the treatment of coronary artery disease with moderate to severe or severe IMR.

Objective: To analyze the trends in incidence and mortality of prostate cancer in Ningbo City, Zhejiang Province, so as to provide insights into the prevention and control of prostate cancer. Methods: Data of the incidence and mortality of prostate cancer in Ningbo City from 2011 to 2023 were collected through Ningbo Chronic Disease Collaborative Management System. The incidence and mortality of prostate cancer were calculated and standardized by the data from the sixth national population census in 2010 and the Segi's world standard population in 1960. The trends in incidence and mortality of prostate cancer were evaluated using average annual percent change (AAPC). Results: A total of 15 411 cases of prostate cancer were reported in Ningbo City from 2011 to 2023, and the crude incidence, Chinese-standardized incidence and world-standardized incidence were 39.62/105, 22.18/105 and 16.49/105, respectively, showing upward trends (AAPC=14.782%, 10.390% and 10.608%, all P<0.05). The Chinese-standardized incidence of prostate cancer was higher in urban areas than in rural areas, and both showed upward trends (25.14/105 vs. 19.44/105; AAPC=9.057% and 14.272%, both P<0.05). The crude incidence of prostate cancer in the groups aged 50-<60 years, 60-<70 years, 70-<80 years and ≥80 years showed upward trends (AAPC=11.657%, 14.031%, 10.734% and 5.300%, all P<0.05). A total of 3 739 deaths were reported, and the crude mortality, Chinese-standardized mortality and world-standardized mortality were 9.66/105, 5.23/105 and 3.71/105, respectively, showing upward trends (AAPC=8.458%, 3.620% and 3.602%, all P<0.05). The Chinese-standardized mortality of prostate cancer was higher in urban areas than in rural areas, and both showed upward trends (5.35/105 vs. 5.13/105; AAPC=3.183% and 3.962%, both P<0.05). The crude mortality of prostate cancer the groups ageds ≥80 years showed an upward trend (AAPC=7.482%, P<0.05). Conclusions From 2011 to 2023, the incidence and mortality of prostate cancer in Ningbo City showed upward trends. Special attention should be paid to urban residents, and prostate cancer screening should be strengthened among males aged 50 years and older.

Background and Objectives: The Fractional Flow Reserve and Intravascular UltrasoundGuided Intervention Strategy for Clinical Outcomes in Patients with Intermediate Stenosis (FLAVOUR) trial demonstrated non-inferiority of fractional flow reserve (FFR)-guided percutaneous coronary intervention (PCI) compared with intravascular ultrasound (IVUS)-guided PCI. We sought to investigate the cost-effectiveness of FFR-guided PCI compared to IVUS-guided PCI in Korea. Methods: A 2-part cost-effectiveness model, composed of a short-term decision tree model and a long-term Markov model, was developed for patients who underwent PCI to treat intermediate stenosis (40% to 70% stenosis by visual estimation on coronary angiography).The lifetime healthcare costs and quality-adjusted life-years (QALYs) were estimated from the healthcare system perspective. Transition probabilities were mainly referred from the FLAVOUR trial, and healthcare costs were mainly obtained through analysis of Korean National Health Insurance claims data. Health utilities were mainly obtained from the Seattle Angina Questionnaire responses of FLAVOUR trial participants mapped to EQ-5D. Results: From the Korean healthcare system perspective, the base-case analysis showed that FFR-guided PCI was 2,451 U.S. dollar lower in lifetime healthcare costs and 0.178 higher in QALYs compared to IVUS-guided PCI. FFR-guided PCI remained more likely to be cost-effective over a wide range of willingness-to-pay thresholds in the probabilistic sensitivity analysis. Conclusions Based on the results from the FLAVOUR trial, FFR-guided PCI is projected to decrease lifetime healthcare costs and increase QALYs compared with IVUS-guided PCI in intermediate coronary lesion, and it is a dominant strategy in Korea.

The general models for intermediates quality analysis in the production process of Yaobitong capsule were established by near infrared spectroscopy (NIRS) combined with chemometrics, realizing the rapid determination of notoginsenoside R1, ginsenoside Rg1, ginsenoside Re, ginsenoside Rb1, ginsenoside Rd and moisture. The spray-dried fine powder and total mixed granule were selected as research objects. The contents of five saponins were determined by high performance liquid chromatography and the moisture content was determined by drying method. The measured contents were used as reference values. Meanwhile, NIR spectra were collected. After removing abnormal samples by Monte Carlo cross validation (MCCV), Monte Carlo uninformative variables elimination (MC-UVE) and competitive adaptive reweighted sampling (CARS) were used to select feature variables respectively. Based on the feature variables, quantitative models were established by partial least squares regression (PLSR), extreme learning machine (ELM) and ant lion optimization least squares support vector machine (ALO-LSSVM). The results showed that CARS-ALO-LSSVM model had the optimum effect. The correlation coefficients of the six index components were greater than 0.93, and the relative standard errors were controlled within 6%. ALO-LSSVM was more suitable for a large number of samples with rich information, and the prediction effect and stability of the model were significantly improved. The general models with good predicting effect can be used for the rapid quality determination of Yaobitong capsule intermediates.