Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Background and Objectives: Several real-world studies have been done in patients with nonvalvular atrial fibrillation (NVAF); however, information on its safety profile in patients with renal impairment is limited. XARENAL, a real-world study, aimed to prospectively investigate the safety profile of rivaroxaban in patients with NVAF with renal impairment (creatinine clearance [CrCl], 15–49 mL/min). Methods: XARENAL is an observational single-arm cohort study in renal impairment NVAF patients. Patients were followed up approximately every 3 months for 1 year or until 30 days following early discontinuation. The primary endpoint was major bleeding events. All adverse events, symptomatic thromboembolic events, treatment duration, and renal function change from baseline were the secondary endpoints. Results: XARENAL included 888 patients from 29 study sites. Overall, 713 (80.3%) had moderate renal impairment (CrCl, 30–49 mL/min), and 175 (19.7%) had severe renal impairment (CrCl, 15–29 mL/min) with a mean estimated glomerular filtration rate (eGFR) of 45.2±13.0 mL/min/1.73 m 2 . The mean risk scores were 3.3±1.4 and 1.7±0.9 for CHA 2 DS 2 -VASc score and HAS-BLED score, respectively. An incidence proportion of 5.6% (6.2 events per 100 patient-years) developed major bleeding; however, fatal bleeding occurred in 0.5% (0.5 events per 100 patient-years). The mean change in the eGFR was 2.22±26.47 mL/min/1.73 m 2 per year. Conclusions XARENAL observed no meaningful differences in major bleeding events from other previous findings as well as renal function changes in rivaroxaban-treated NVAF patients with renal impairment, which is considered to be acceptable in clinical practice.

Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Background and Objectives: Several real-world studies have been done in patients with nonvalvular atrial fibrillation (NVAF); however, information on its safety profile in patients with renal impairment is limited. XARENAL, a real-world study, aimed to prospectively investigate the safety profile of rivaroxaban in patients with NVAF with renal impairment (creatinine clearance [CrCl], 15–49 mL/min). Methods: XARENAL is an observational single-arm cohort study in renal impairment NVAF patients. Patients were followed up approximately every 3 months for 1 year or until 30 days following early discontinuation. The primary endpoint was major bleeding events. All adverse events, symptomatic thromboembolic events, treatment duration, and renal function change from baseline were the secondary endpoints. Results: XARENAL included 888 patients from 29 study sites. Overall, 713 (80.3%) had moderate renal impairment (CrCl, 30–49 mL/min), and 175 (19.7%) had severe renal impairment (CrCl, 15–29 mL/min) with a mean estimated glomerular filtration rate (eGFR) of 45.2±13.0 mL/min/1.73 m 2 . The mean risk scores were 3.3±1.4 and 1.7±0.9 for CHA 2 DS 2 -VASc score and HAS-BLED score, respectively. An incidence proportion of 5.6% (6.2 events per 100 patient-years) developed major bleeding; however, fatal bleeding occurred in 0.5% (0.5 events per 100 patient-years). The mean change in the eGFR was 2.22±26.47 mL/min/1.73 m 2 per year. Conclusions XARENAL observed no meaningful differences in major bleeding events from other previous findings as well as renal function changes in rivaroxaban-treated NVAF patients with renal impairment, which is considered to be acceptable in clinical practice.

Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Background and Objectives: Several real-world studies have been done in patients with nonvalvular atrial fibrillation (NVAF); however, information on its safety profile in patients with renal impairment is limited. XARENAL, a real-world study, aimed to prospectively investigate the safety profile of rivaroxaban in patients with NVAF with renal impairment (creatinine clearance [CrCl], 15–49 mL/min). Methods: XARENAL is an observational single-arm cohort study in renal impairment NVAF patients. Patients were followed up approximately every 3 months for 1 year or until 30 days following early discontinuation. The primary endpoint was major bleeding events. All adverse events, symptomatic thromboembolic events, treatment duration, and renal function change from baseline were the secondary endpoints. Results: XARENAL included 888 patients from 29 study sites. Overall, 713 (80.3%) had moderate renal impairment (CrCl, 30–49 mL/min), and 175 (19.7%) had severe renal impairment (CrCl, 15–29 mL/min) with a mean estimated glomerular filtration rate (eGFR) of 45.2±13.0 mL/min/1.73 m 2 . The mean risk scores were 3.3±1.4 and 1.7±0.9 for CHA 2 DS 2 -VASc score and HAS-BLED score, respectively. An incidence proportion of 5.6% (6.2 events per 100 patient-years) developed major bleeding; however, fatal bleeding occurred in 0.5% (0.5 events per 100 patient-years). The mean change in the eGFR was 2.22±26.47 mL/min/1.73 m 2 per year. Conclusions XARENAL observed no meaningful differences in major bleeding events from other previous findings as well as renal function changes in rivaroxaban-treated NVAF patients with renal impairment, which is considered to be acceptable in clinical practice.

Background and Objectives: Several real-world studies have been done in patients with nonvalvular atrial fibrillation (NVAF); however, information on its safety profile in patients with renal impairment is limited. XARENAL, a real-world study, aimed to prospectively investigate the safety profile of rivaroxaban in patients with NVAF with renal impairment (creatinine clearance [CrCl], 15–49 mL/min). Methods: XARENAL is an observational single-arm cohort study in renal impairment NVAF patients. Patients were followed up approximately every 3 months for 1 year or until 30 days following early discontinuation. The primary endpoint was major bleeding events. All adverse events, symptomatic thromboembolic events, treatment duration, and renal function change from baseline were the secondary endpoints. Results: XARENAL included 888 patients from 29 study sites. Overall, 713 (80.3%) had moderate renal impairment (CrCl, 30–49 mL/min), and 175 (19.7%) had severe renal impairment (CrCl, 15–29 mL/min) with a mean estimated glomerular filtration rate (eGFR) of 45.2±13.0 mL/min/1.73 m 2 . The mean risk scores were 3.3±1.4 and 1.7±0.9 for CHA 2 DS 2 -VASc score and HAS-BLED score, respectively. An incidence proportion of 5.6% (6.2 events per 100 patient-years) developed major bleeding; however, fatal bleeding occurred in 0.5% (0.5 events per 100 patient-years). The mean change in the eGFR was 2.22±26.47 mL/min/1.73 m 2 per year. Conclusions XARENAL observed no meaningful differences in major bleeding events from other previous findings as well as renal function changes in rivaroxaban-treated NVAF patients with renal impairment, which is considered to be acceptable in clinical practice.

Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.