Objective To explore the feasibility and reference value of allogeneic lung transplantation and postoperative monitoring in miniature pigs for lung transplantation research. Methods Two miniature pigs (R1 and R2) underwent left lung allogeneic transplantation. Complement-dependent cytotoxicity tests and blood cross-matching were performed before surgery. The main operative times and partial pressure of arterial oxygen (PaO₂) after opening the pulmonary artery were recorded during surgery. Postoperatively, routine blood tests, biochemical blood indicators and inflammatory factors were detected, and pathological examinations of multiple organs were conducted. Results The complement-dependent cytotoxicity test showed that the survival rate of lymphocytes between donors and recipients was 42.5%-47.3%, and no agglutination reaction occurred in the cross-matching. The first warm ischemia times of D1 and D2 were 17 min and 10 min, respectively, and the cold ischemia times were 246 min and 216 min, respectively. Ultimately, R1 and R2 survived for 1.5 h and 104 h, respectively. Postoperatively, in R1, albumin (ALB) and globulin (GLB) decreased, and alanine aminotransferase increased; in R2, ALB, GLB and aspartate aminotransferase all increased. Urea nitrogen and serum creatinine increased in both recipients. Pathological results showed that in R1, the transplanted lung had partial consolidation with inflammatory cell infiltration, and multiple organs were congested and damaged. In R2, the transplanted lung had severe necrosis with fibrosis, and multiple organs had mild to moderate damage. The expression levels of interleukin-1β and interleukin-6 increased in the transplanted lungs. Conclusions The allogeneic lung transplantation model in miniature pigs may systematically evaluate immunological compatibility, intraoperative function and postoperative organ damage. The data obtained may provide technical references for subsequent lung transplantation research.

Objective To develop a symptom and function assessment scale for patients after Nuss procedure for pectus excavatum and to test its reliability and validity. Methods Following the principles and procedures of patient-reported outcome (PRO) scale development stipulated by the U.S. Food and Drug Administration, an initial draft was formed through literature analysis, qualitative interviews, and Delphi expert consultation. The preliminary draft was used to conduct a pre-survey on patients who underwent Nuss procedure for pectus excavatum at Guangdong Provincial People's Hospital, and the reliability and validity of the scale were tested. Results A preliminary PRO-based symptom and function scale was constructed, covering two domains: symptoms and impact on daily functions. The symptom dimension included six items: chest tightness, palpitations, pain, shortness of breath, foreign body sensation of the steel plate, and distress; while the impact on daily functions included four items: difficulty in getting out of bed or lying down, raising arms, bending over, and standing or sitting for a long time. A total of 73 patients who underwent Nuss procedure for pectus excavatum were included in the questionnaire survey, with 70 valid questionnaires collected, including 64 males and 6 females, with 56 patients aged 12-17 years and 14 patients ≥18 years. Through exploratory factor analysis, two common factors were extracted, with a cumulative variance contribution rate of 70%. The Cronbach’s α coefficient of the scale was 0.917. Conclusion The scale developed in this study has good reliability and validity, high reliability and stability, and can be used as an evaluation tool for the recovery status of patients after Nuss procedure for pectus excavatum.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

Objective:To predict mechanical complications (MC) following spinal deformity surgery for adult spine deformity (ASD) using machine learning models, identify key risk factors, and develop a visualizable tool for individualized risk assessment.Methods:Clinical and radiological data from 525 patients with ASD who underwent surgery in our hospital between January 2017 and December 2021 were collected. Patients were randomly assigned to a training set (70%) and a test set (30%) for model development. The cohort included 88 males and 437 females, with a mean age of 42.2±18.1 years. Variables included demographic data, comorbidities, local and systemic radiological parameters, paraspinal muscle fat infiltration (FI), and vertebral bone quality (VBQ) scores. Multiple machine learning algorithms: Random Forest (RF), Gaussian Naive Bayes (GNB), Light GBM, Support Vector Machine (SVM), XGBoost (XGB), and Logistic Regression (LR) were trained and evaluated. Model performance was compared using the receiver operating characteristic curve (ROC) and precision-recall curve (PRC). SHAP (Shapley Additive Explanations) was used to rank risk factors, while LIME (Local Interpretable Model-Agnostic Explanations) was applied to visualize MC risk in individual cases.Results:Of the 525 patients, 135 (25.7%) developed postoperative MC. Among these, 80 (59.3%) experienced proximal junction kyphosis or failure (PJK/PJF), 7 (5.2%) had distal junction kyphosis or failure (DJK/DJF), 28 (20.7%) sustained rod fractures, and 29 (21.5%) showed significant loss of correction. In the validation cohort, the RF model achieved the highest area under the curve (AUC=0.80), followed by GNB (0.77), XGB (0.76), LR (0.74), LightGBM (0.73), and SVM (0.66). The RF model also demonstrated the best PRC value (0.58), highest sensitivity (0.65), and lowest Brier score (0.20). GNB, Light GBM, and LR models achieved the highest accuracy (0.78 each), while LightGBM exhibited the highest specificity (0.93). SHAP analysis identified higher preoperative VBQ scores, larger T 1 pelvic angle (TPA), and higher paraspinal muscle FI as the main risk factors for MC. Based on the RF model, a LIME-based tool was successfully constructed for individualized MC risk estimation. Conclusion:The RF model demonstrated the best overall predictive performance for MC. A machine learning-based prediction model has the potential to provide valuable guidance for surgical decision-making in ASD patients.

Objective To investigate the characteristics of changes in hepatitis B surface antigen(HBsAg),hepatitis B virus(HBV)deoxyribonucleic acid(DNA),and alanine aminotransferase(ALT)levels following the cessation of nucleos(t)ide analogues(NAs)therapy in hepatitis B e antigen(HBeAg)-negative chronic hepatitis B(CHB)patients with baseline HBsAg levels<1000 IU/ml.Methods This retrospective cohort study analyzed 73 HBeAg-negative CHB patients treated at the Fifth Medical Centre of Chinese PLA General Hospital from January 2020 to June 2023.Patients were divided into 3 groups according to baseline HBsAg level and discontinuation strategy:HBsAg-negative discontinuation group(n=14),HBsAg-positive discontinuation group(n=25),and HBsAg-positive continuation group(n=34).All patients were followed for 48 weeks.Baseline clinical characteristics and changes in virological and hepatic biochemical indicators during follow-up were compared among the 3 groups.Univariate logistic regression analysis was performed to assess the correlation between clinical indicators and HBV DNA reappearance in HBsAg-positive discontinuation group,and between clinical indicators and HBsAg decline>0.5 log IU/ml in this group.Results There were no significant differences in the baseline levels of gender,age,albumin,and total bilirubin among the 3 groups(P>0.05).The baseline direct bilirubin level was significantly higher in HBsAg-positive discontinuation group than that in other groups(P<0.05),while the lymphocyte counts were significantly higher in HBsAg-negative discontinuation group(P<0.05).During the 48-week follow-up period,the HBV DNA reappearance rate in HBsAg-positive discontinuation group(72.0%)was significantly higher than that in other groups(P<0.001).There was no significant difference in the incidence of ALT elevation among the three groups(P=0.260).The proportion of patients with HBsAg decline>0.5 log IU/ml in HBsAg-positive discontinuation group(24.0%)was significantly higher than that in HBsAg-positive continuation group(5.9%,P<0.05).The proportion of patients with HBsAg increase>0.5 log IU/ml in HBsAg-positive discontinuation group(12.0%)was also significantly higher than that in HBsAg-positive continuation group(0%,P<0.05).Univariate logistic regression analysis revealed no significant association between the analyzed clinical indicators and HBsAg decline(P>0.05).Conclusions Discontinuation of NAs therapy in HBsAg-negative patients demonstrates high safety,with sustained HBsAg negativity post-cessation and low risks of viral relapse and liver function abnormalities.For HBsAg-positive patients,discontinuation may promote HBsAg decline in some individuals but is associated with risks of HBV DNA reappearance and HBsAg elevation.The decision to discontinue therapy should be comprehensively evaluated based on patients'baseline HBsAg levels and clinical characteristics.

BACKGROUND: Temozolomide (TMZ) resistance is a significant challenge in treating glioblastoma (GBM). Collagen remodeling has been shown to be a critical factor for therapy resistance in other cancers. This study aimed to investigate the mechanism of TMZ chemoresistance by GBM cells reprogramming collagens. METHODS: Key extracellular matrix components, including collagens, were examined in paired primary and recurrent GBM samples as well as in TMZ-treated spontaneous and grafted GBM murine models. Human GBM cell lines (U251, TS667) and mouse primary GBM cells were used for in vitro studies. RNA-sequencing analysis, chromatin immunoprecipitation, immunoprecipitation-mass spectrometry, and co-immunoprecipitation assays were conducted to explore the mechanisms involved in collagen accumulation. A series of in vitro and in vivo experiments were designed to assess the role of the collagen regulators prolyl 4-hydroxylase subunit alpha 1 (P4HA1) and yes-associated protein (YAP) in sensitizing GBM cells to TMZ. RESULTS: This study revealed that TMZ exposure significantly elevated collagen type I (COL I) expression in both GBM patients and murine models. Collagen accumulation sustained GBM cell survival under TMZ-induced stress, contributing to enhanced TMZ resistance. Mechanistically, P4HA1 directly binded to and hydroxylated YAP, preventing ubiquitination-mediated YAP degradation. Stabilized YAP robustly drove collagen type I alpha 1 ( COL1A1) transcription, leading to increased collagen deposition. Disruption of the P4HA1-YAP axis effectively reduced COL I deposition, sensitized GBM cells to TMZ, and significantly improved mouse survival. CONCLUSION P4HA1 maintained YAP-mediated COL1A1 transcription, leading to collagen accumulation and promoting chemoresistance in GBM.
Temozolomide ; Humans ; Glioblastoma/drug therapy* ; Animals ; Mice ; Cell Line, Tumor ; Drug Resistance, Neoplasm/genetics* ; YAP-Signaling Proteins ; Hydroxylation ; Dacarbazine/pharmacology* ; Adaptor Proteins, Signal Transducing/metabolism* ; Transcription Factors/metabolism* ; Collagen/biosynthesis* ; Collagen Type I/metabolism* ; Prolyl Hydroxylases/metabolism* ; Antineoplastic Agents, Alkylating/therapeutic use*

Lung transplantation is the ultimate therapeutic option for end-stage pulmonary diseases such as interstitial pneumonia, chronic obstructive pulmonary disease and pneumoconiosis. Currently, the shortage of allogeneic lung donors significantly limits the opportunity for end-stage lung disease patients to receive lung transplantation. In recent years, with the rapid development of biomedical engineering technologies, especially the major breakthroughs in genetic modification and cloning, xenogeneic lung transplantation has shown important potential for clinical translation. Among them, genetically modified pigs have become the most promising xenogeneic lung source due to the close similarity of organ size and physiological characteristics to humans, and the ability to perform targeted gene knockouts (such as α-Gal antigen knockout) to reduce the occurrence of hyperacute rejection. This article focuses on the research progress of porcine xenogeneic lung transplantation, systematically reviews the latest achievements and challenges in animal experiments and human trials, and introduces the technical experience accumulated by Shenzhen Third People's Hospital in the porcine-to-monkey xenogeneic lung transplantation model, in the hope of providing practical references for future research in this field.

Objective To investigate the epidemiological characteristics of knee osteoarthritis(KOA)among military personnel in plateau regions and to explore its risk factors.Methods From July 2023 to July 2024,a multi-stage stratified cluster random sampling method was employed to survey the prevalence of KOA and related risk factors among military personnel in the northwest plateau regions of China,covering different altitudes(1500-4500 m)and geographical areas(Gansu,Qinghai,Tibet,and Xinjiang).All study subjects were divided into KOA and non-KOA groups based on the presence or absence of KOA.Variables including age,gender,body mass index(BMI),education level,smoking status,military rank,military branch,service duration,regional altitude,annual average temperature,training duration,perceived training intensity,and history of knee injury were selected for univariate analyses between groups.Variables with P<0.05 in the univariate analyses were included in the binary multifactor logistic regression to identify risk factors for KOA.Results A total of 3000 questionnaires were distributed,and 2854 valid questionnaires were collected,with a response rate of 95.13%.The sample included 2584 males and 270 females,with 510 cases of KOA,resulting in a prevalence rate of 17.9%.Univariate analysis showed that there were statistically significant differences between KOA and non-KOA groups in terms of age,BMI,smoking status,military rank,military branch,service duration,regional altitude,annual average temperature,training duration,perceived training intensity,and history of knee injury(P<0.05).However,no significant differences were found in gender and education level(P>0.05).Binary multivariate logistic regression analysis revealed that older age(OR=1.382,P=0.017),higher BMI(P<0.01),smoking(OR=1.929,P<0.01),higher military rank(OR=1.485,P=0.007),being a member of the Armed Police(P<0.01),longer service duration(P<0.01),higher regional altitude(OR=1.459,P<0.01),lower annual average temperature(OR=1.188,P=0.001),longer training duration(P<0.01),higher perceived training intensity(OR=2.450,P<0.01),and history of knee injury(OR=2.768,P=0.002)were independent risk factors for KOA.Conclusions Older age,overweight/obesity,smoking,higher military rank,being a member of the Armed Police,longer service duration,higher altitude,cold climate,longer training duration,higher training intensity,and history of knee injury are independent risk factors for KOA among military personnel in the northwest plateau regions of China.