Purpose: Temporomandibular disorder (TMD) is a multifactorial condition influenced by biological, psychological, and social factors. Some patients perceive dental treatment as the cause of their TMD, which may impact symptom perception and treatment response.This study aims to compare the psychosocial and clinical characteristics of patients who attribute their TMD onset to prior dental treatment (DT group) with those who do not (NT group). Methods: A total of 250 patients diagnosed with TMD at Pusan National University Dental Hospital between January and October 2024 were included. Patients were classified into the DT group (n=92) if they attributed their symptoms to previous dental procedures, while the remaining NT group (n=158) consisted of patients with other primary complaints. Patients were additionally categorized into Generation X (1965-1980), Generation Y (1981-1999), and Generation Z (2000-2012). Clinical assessments were conducted following the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD), and psychosocial factors were evaluated using the Oral Behaviors Checklist (OBC), Patient Health Questionnaire-9 (PHQ-9), Generalized Anxiety Disorder-7 (GAD-7), and Patient Health Questionnaire-15 (PHQ-15). Results: The DT group had a significantly higher mean age (54.16±16.87 years) compared to the NT group (39.71±19.12 years, p<0.001). Psychological distress scores (PHQ-9, GAD-7, and PHQ-15) were significantly higher in the DT group, particularly among Generation X patients (p<0.05). Muscle-related pain was more prevalent in the DT group (75%) than in the NT group. Interestingly, OBC scores were higher in the NT group (p<0.05). Conclusions Patients who attributed their TMD onset to dental treatment reported higher psychological distress and a greater prevalence of muscle-related pain, underscoring the need for a biopsychosocial approach to TMD management. Clinicians should consider the impact of patient perception on TMD symptoms and integrate psychological assessment and counseling to enhance treatment efficacy and patient adherence.

Background: This study aimed to assess the severity of postoperative delirium (PD) in elderly patients who underwent reverse total shoulder arthroplasty (rTSA) for irreparable massive rotator cuff tears (mRCTs) under general anesthesia (GA) compared to those under interscalene block (IB). Methods: Forty elderly patients aged 65 years or older diagnosed with an irreparable mRCT who underwent rTSA were included in the prospective case-controlled study. Of these, 20 patients were operated under GA and the other 20 under IB. The average age was 77.1 years (range, 65–95 years). The severity of delirious symptoms was evaluated by the Delirium Rating Scale–revised–98 (DRS) score from the patients or guardians before the surgery and at 0, 3, and 7 days and 1, 3, and 6 months after the surgery and compared between the 2 groups. Results: Immediately after surgery, the visual analog scale score difference between the groups was statistically significant, with the GA group at 6.25 (standard deviation, ± 0.85) and the IB group at 3.80 (± 0.62) (p < 0.001). On the day of operation, the mean DRS score in the GA and IB groups were 9.10 (± 5.63) and 6.60 (± 5.33), respectively (p = 0.157). On day 3 of surgery, the mean DRS score in the GA group peaked to 9.95 (± 8.73), while in the IB group, it declined to 6.40 (±5.81) (p = 0.138). After 3 days, DRS scores showed a decreasing trend in both groups. When comparing the mean change (∆) from the preoperative baseline scores to the postoperative values, the ∆DRS score was significantly higher with 4.15 (± 4.53) points in the GA group as compared to 1.30 (± 1.92) in the IB group (p = 0.014). Conclusions IB can be an attractive and efficient anesthetic choice in preventing PD for elderly patients undergoing rTSA for irreparable mRCTs. The IB group showed lower DRS scores and a peak on day 0 compared to the higher DRS scores and peak on day 3 in the GA group. Additionally, IB showed less pain than GA.

Background: Anterior dislocation in epilepsy patients is relatively severe, difficult to treat, and prone to recurrence. The purpose of this study was to compare the results of arthroscopic Bankart repair and the open Latarjet procedure in epilepsy patients who had anterior shoulder instability and to compare the results of the open Latarjet procedure in epilepsy and non-epileptic groups. Methods: A total of 57 shoulders (34 dominant) in 55 patients (18–50 years, 45 men and 10 women) with anterior glenohumeral instability were included in the study and the average follow-up was 24 months. Out of 21 epilepsy patients (23 shoulders), 11 were treated with the open Latarjet procedure and 12 with arthroscopic Bankart repair. Additionally, comparisons were made between the 34 non-epileptic patients who underwent the open Latarjet procedure and the epilepsy patients who underwent the same procedure. Results: In the epilepsy group, all 12 patients who underwent Bankart repair had on-track lesions, and all 11 patients who underwent the Latarjet procedure had off-track lesions. In the non-epilepsy group, all cases were off-track lesions. In the epilepsy group, there was no significant difference in the postoperative clinical outcome and recurrence rate between the Bankart repair and Latarjet procedure groups. In the Latarjet group, postoperative re-dislocation rate in the non-epilepsy patients was 14% (5/34 cases), compared to 45% (5/11 cases) in the epilepsy patients, 4 of which 4 occurred during seizures. It was 41% in the Bankart repair group for on-track lesions, which was similar to the recurrence rate after the Latarjet for off-track lesions in the epilepsy group. Conclusions After the Latarjet procedure, the functional outcomes in the epilepsy group were similar to those in the non-epilepsy group, except for the higher re-dislocation rate. With either of the surgical procedures, the re-dislocation rate secondary to seizures was very high. Despite the presence of on-track lesions, the Latarjet procedure would be more preferrable for anterior stabilization in epilepsy patients, in view of the high recurrence rate with arthroscopic Bankart repair.

Radiofrequency ablation (RFA) is a minimally invasive treatment modality used as an alternative to surgery in patients with benign thyroid nodules, recurrent thyroid cancers (RTCs), and primary thyroid microcarcinomas. The Korean Society of Thyroid Radiology (KSThR) initially developed recommendations for the optimal use of RFA for thyroid tumors in 2009 and revised them in 2012 and 2017. As new meaningful evidence has accumulated since 2017 and in response to a growing global interest in the use of RFA for treating malignant thyroid lesions, the task force committee members of the KSThR decided to update the guidelines on the use of RFA for the management of RTCs based on a comprehensive analysis of current literature and expert consensus.

With the increasing emphasis on diversity, equity, and inclusion (DEI) in organizations and institutions, academic societies in gastroenterology and hepatology are beginning to take actionable steps toward achieving DEI. The successful implementation of DEI initiatives leads to excellence in the field, improved patient outcomes, particularly in areas where health disparities are prevalent, and advances in the gastrointestinal discipline. Such implementation also results in a workforce that better reflects the growing diversity of the population. This review defines DEI and introduces the DEI policies and strategies adopted by the academic societies of gastroenterology in other countries. This paper proposes strategies to integrate DEI better into the Korean Society of Gastroenterology, emphasizing the importance of embedding DEI into the culture and strategic framework. The key strategies include establishing a DEI committee, setting clear targets, and conducting formal assessments to measure DEI progress. This study focused on enhancing workforce diversity, particularly among women and young doctors, and advocates for the need to support their academic development through male allyship and the promotion of equitable and inclusive academic cultures.

Background/Aims: Studies on the clinical outcomes after detecting low-grade dysplasia (LGD) in patients with inflammatory bowel disease (IBD) are insufficient. This study evaluated the clinical features, frequency, and risk factors for advanced neoplasia in patients with IBD after an LGD diagnosis. Methods: The medical records of 166 patients with IBD from six university hospitals in Korea from 2010 to 2019 were reviewed retrospectively. LGD was diagnosed in all patients during surveillance. The frequency and risk factors for advanced neoplasia were evaluated, and the clinical features of patients with and without advanced neoplasia were compared. Results: Advanced neoplasia developed in 12 patients (six with large LGD, three with tubulovillous adenoma, and three with high-grade dysplasia), and all cases developed from UC. Patients with advanced neoplasia had significantly higher Mayo scores, and colitis-associated dysplasia was more common than sporadic lesions (83.3% vs. 29.9%; p<0.001). Multivariate analysis showed that colitis-associated LGD significantly increased the risk of developing advanced neoplasia (odds ratio [OR], 10.516; 95% confidence interval [CI], 2.064–53.577). Among patients with colitis-associated lesions, a significant risk factor for advanced neoplasia was a prior history of LGD (OR, 9.429; 95% CI, 1.330–66.863). Conclusions Advanced neoplasia developed in 7.2% of patients with IBD and LGD. Most advanced neoplasms developed from colitis-associated lesions, and the risk was higher in patients with a history of LGD before index colonoscopy.

Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Objective: Using finite element method (FEM) analysis of a clear aligner (CA), this study aimed to investigate the effects of varying the edentulous space on canine distal bodily movement during space closure following maxillary first premolar extraction. Methods: FEM analysis was used to simulate distal canine bodily movement following maxillary first premolar extraction using CAs. Four CA designs for edentulous spaces were compared: no-pontic, full-pontic, halfpontic, and beam. Three-dimensional models of the tooth components and CA were created. The target was set at a 0.25-mm distal canine movement. Long-term tooth movement was simulated using an iterative calculation method. Results: All the groups initially showed crown displacement, distal tipping, and distal rotation.Over time, the movement patterns differed in relation to the design. The no-pontic design exhibited the greatest displacement and tipping. The beam design exhibited the largest initial displacement but showed the lowest displacement and tipping thereafter. Full- and half-pontic designs yielded intermediate results. Significant force reduction was observed immediately after CA application, and was followed by a gradual decrease. The mean tooth-movement achievement rate was approximately 76.7%. Conclusions The edentulous space design of the CA substantially affected tooth-movement behavior. An iterative simulation is necessary to evaluate longterm tooth-movement patterns. The beam design demonstrated optimal suitability for bodily movement with minimal tipping. For optimal results, additional setup or overcorrection may be necessary.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

In forensic science, age estimation is essential for identifying both living and deceased individuals. Teeth and jawbones serve as reliable indicators due to their gradual age-related changes and resistance to environmental factors. Among the various methods, attrition and pulp cavity size are commonly used to estimate adult age. This study aimed to enhance the accuracy of age estimation in Korean adults by combining measurements of tooth attrition and pulp cavity size obtained from panoramic radiographs of mandibular first molars. We evaluated 118 patients (62 male, 56 female) who visited Pusan National University Dental Hospital between 2010 and 2024. Radiographs and clinical photographs were analyzed for grade C teeth with exposed dentin using Takei’s method, and the pulp chamber height ratio (PCHR) and width ratio (PCWR) were measured using Jeon’s method. Intraobserver reliability was high (intraclass correlation coefficient>0.6), with no significant sex-based differences in PCHR and PCWR. Both ratios negatively correlated with age, with PCWR showing a stronger correlation, particularly in females (r=–0.606). This study derived an improved age estimation formula with R² values ranging from 0.540 to 0.546 when both PCHR and PCWR were combined. Despite the limitations of this study, such as its small sample size and reliance on panoramic radiographs, the findings suggest that combining tooth wear and pulp cavity size offers a more robust tool for age estimation in clinical and forensic settings.