Objectives: To involve institutions without the ability to perform susceptibility testing, long-term storage of tissue sample is critical to isolate the bacteria in a central laboratory. The aim of the study was to investigate the feasibility of H. pylori isolation and antibiotic susceptibility testing using rapidly frozen biopsy specimens collected from various institutions. Methods: Eight institutions located in various regions of Korea participated in the study. Patients requiring upper endoscopy and H. pylori testing were screened. Two biopsy samples were taken from the stomach. One was placed in a sterile Eppendorf tube and then immediately placed in a vacuum bottle containing dry ice, which was stored at -80°C. The other was used in a rapid urease test. Collected samples were delivered to a central laboratory. The bacteria were isolated from the frozen samples under microaerophilic conditions. The agar dilution method was used to determine the minimum inhibitory concentration (MIC) of amoxicillin, clarithromycin, metronidazole, tetracycline, ciprofloxacin, and levofloxacin for each H. pylori isolate. Results: Patients with a positive rapid urease test result (n=113) were enrolled. The mean age was 56.6±12.3 years. The male:female ratio was 64:49. The overall culture success rate was 77.0% (87/113). MIC values were determined using isolated 87 H. pylori strains. Rates of resistance to amoxicillin, clarithromycin, metronidazole, tetracycline, levofloxacin, and ciprofloxacin were 23.0%, 25.3%, 28.7%, 1.1%, 33.3%, and 34.5%, respectively. Conclusions It is feasible to perform H. pylori isolation and antimicrobial susceptibility testing using rapidly frozen and transported biopsy specimens.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objectives: To involve institutions without the ability to perform susceptibility testing, long-term storage of tissue sample is critical to isolate the bacteria in a central laboratory. The aim of the study was to investigate the feasibility of H. pylori isolation and antibiotic susceptibility testing using rapidly frozen biopsy specimens collected from various institutions. Methods: Eight institutions located in various regions of Korea participated in the study. Patients requiring upper endoscopy and H. pylori testing were screened. Two biopsy samples were taken from the stomach. One was placed in a sterile Eppendorf tube and then immediately placed in a vacuum bottle containing dry ice, which was stored at -80°C. The other was used in a rapid urease test. Collected samples were delivered to a central laboratory. The bacteria were isolated from the frozen samples under microaerophilic conditions. The agar dilution method was used to determine the minimum inhibitory concentration (MIC) of amoxicillin, clarithromycin, metronidazole, tetracycline, ciprofloxacin, and levofloxacin for each H. pylori isolate. Results: Patients with a positive rapid urease test result (n=113) were enrolled. The mean age was 56.6±12.3 years. The male:female ratio was 64:49. The overall culture success rate was 77.0% (87/113). MIC values were determined using isolated 87 H. pylori strains. Rates of resistance to amoxicillin, clarithromycin, metronidazole, tetracycline, levofloxacin, and ciprofloxacin were 23.0%, 25.3%, 28.7%, 1.1%, 33.3%, and 34.5%, respectively. Conclusions It is feasible to perform H. pylori isolation and antimicrobial susceptibility testing using rapidly frozen and transported biopsy specimens.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objectives: To involve institutions without the ability to perform susceptibility testing, long-term storage of tissue sample is critical to isolate the bacteria in a central laboratory. The aim of the study was to investigate the feasibility of H. pylori isolation and antibiotic susceptibility testing using rapidly frozen biopsy specimens collected from various institutions. Methods: Eight institutions located in various regions of Korea participated in the study. Patients requiring upper endoscopy and H. pylori testing were screened. Two biopsy samples were taken from the stomach. One was placed in a sterile Eppendorf tube and then immediately placed in a vacuum bottle containing dry ice, which was stored at -80°C. The other was used in a rapid urease test. Collected samples were delivered to a central laboratory. The bacteria were isolated from the frozen samples under microaerophilic conditions. The agar dilution method was used to determine the minimum inhibitory concentration (MIC) of amoxicillin, clarithromycin, metronidazole, tetracycline, ciprofloxacin, and levofloxacin for each H. pylori isolate. Results: Patients with a positive rapid urease test result (n=113) were enrolled. The mean age was 56.6±12.3 years. The male:female ratio was 64:49. The overall culture success rate was 77.0% (87/113). MIC values were determined using isolated 87 H. pylori strains. Rates of resistance to amoxicillin, clarithromycin, metronidazole, tetracycline, levofloxacin, and ciprofloxacin were 23.0%, 25.3%, 28.7%, 1.1%, 33.3%, and 34.5%, respectively. Conclusions It is feasible to perform H. pylori isolation and antimicrobial susceptibility testing using rapidly frozen and transported biopsy specimens.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objective: The Scales for Outcomes in Parkinson’s Disease–Cognition (SCOPA-Cog) was developed to assess cognition in patients with Parkinson’s disease (PD). In this study, we aimed to evaluate the validity and reliability of the Korean version of the SCOPACog (K-SCOPA-Cog). Methods: We enrolled 129 PD patients with movement disorders from 31 clinics in South Korea. The original version of the SCOPA-Cog was translated into Korean using the translation-retranslation method. The test–retest method with an intraclass correlation coefficient (ICC) and Cronbach’s alpha coefficient were used to assess reliability. Spearman’s rank correlation analysis with the Montreal Cognitive Assessment-Korean version (MOCA-K) and the Korean Mini-Mental State Examination (K-MMSE) were used to assess concurrent validity. Results: The Cronbach’s alpha coefficient was 0.797, and the ICC was 0.887. Spearman’s rank correlation analysis revealed a significant correlation with the K-MMSE and MOCA-K scores (r = 0.546 and r = 0.683, respectively). Conclusion Our results demonstrate that the K-SCOPA-Cog has good reliability and validity.

Objectives: To involve institutions without the ability to perform susceptibility testing, long-term storage of tissue sample is critical to isolate the bacteria in a central laboratory. The aim of the study was to investigate the feasibility of H. pylori isolation and antibiotic susceptibility testing using rapidly frozen biopsy specimens collected from various institutions. Methods: Eight institutions located in various regions of Korea participated in the study. Patients requiring upper endoscopy and H. pylori testing were screened. Two biopsy samples were taken from the stomach. One was placed in a sterile Eppendorf tube and then immediately placed in a vacuum bottle containing dry ice, which was stored at -80°C. The other was used in a rapid urease test. Collected samples were delivered to a central laboratory. The bacteria were isolated from the frozen samples under microaerophilic conditions. The agar dilution method was used to determine the minimum inhibitory concentration (MIC) of amoxicillin, clarithromycin, metronidazole, tetracycline, ciprofloxacin, and levofloxacin for each H. pylori isolate. Results: Patients with a positive rapid urease test result (n=113) were enrolled. The mean age was 56.6±12.3 years. The male:female ratio was 64:49. The overall culture success rate was 77.0% (87/113). MIC values were determined using isolated 87 H. pylori strains. Rates of resistance to amoxicillin, clarithromycin, metronidazole, tetracycline, levofloxacin, and ciprofloxacin were 23.0%, 25.3%, 28.7%, 1.1%, 33.3%, and 34.5%, respectively. Conclusions It is feasible to perform H. pylori isolation and antimicrobial susceptibility testing using rapidly frozen and transported biopsy specimens.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objectives: To involve institutions without the ability to perform susceptibility testing, long-term storage of tissue sample is critical to isolate the bacteria in a central laboratory. The aim of the study was to investigate the feasibility of H. pylori isolation and antibiotic susceptibility testing using rapidly frozen biopsy specimens collected from various institutions. Methods: Eight institutions located in various regions of Korea participated in the study. Patients requiring upper endoscopy and H. pylori testing were screened. Two biopsy samples were taken from the stomach. One was placed in a sterile Eppendorf tube and then immediately placed in a vacuum bottle containing dry ice, which was stored at -80°C. The other was used in a rapid urease test. Collected samples were delivered to a central laboratory. The bacteria were isolated from the frozen samples under microaerophilic conditions. The agar dilution method was used to determine the minimum inhibitory concentration (MIC) of amoxicillin, clarithromycin, metronidazole, tetracycline, ciprofloxacin, and levofloxacin for each H. pylori isolate. Results: Patients with a positive rapid urease test result (n=113) were enrolled. The mean age was 56.6±12.3 years. The male:female ratio was 64:49. The overall culture success rate was 77.0% (87/113). MIC values were determined using isolated 87 H. pylori strains. Rates of resistance to amoxicillin, clarithromycin, metronidazole, tetracycline, levofloxacin, and ciprofloxacin were 23.0%, 25.3%, 28.7%, 1.1%, 33.3%, and 34.5%, respectively. Conclusions It is feasible to perform H. pylori isolation and antimicrobial susceptibility testing using rapidly frozen and transported biopsy specimens.