BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

OBJECTIVE: To explore the feasibility and effectiveness of suture anchor double-pulley technique combined with suture three-dimensional binding via bone tunnel technique for avulsion fractures of the inferior pole of the patella. METHODS: A clinical data of 38 patients with avulsion fractures of the inferior pole of the patella, who met the selective criteria and were admitted between September 2021 and April 2023, was retrospectively analyzed. The fractures were treated with suture anchor double-pulley technique combined with suture three-dimensional binding via bone tunnel technique in 18 cases (group A) and steel wire tension-band fixation in 20 cases (group B). There was no significant difference in terms of age, gender, cause of fracture, side of fracture, and disease duration between the two groups ( P>0.05). The length of incision, operation time, occurrence of complications, the range of motion of knee joint, and Böstman score of knee joint at last follow-up were recorded. The fracture healing was evaluated through X-ray films and the time of fracture healing was recorded. RESULTS: All incisions healed by first intention. The length of incision was significantly shorter in group A than in group B ( P<0.05). There was no significant difference in the operation time between the two groups ( P>0.05). All patients were followed up 12-24 months (mean, 16.1 months). X-ray films showed that all fractures healed and there was no significant difference in the healing time between the two groups ( P>0.05). At last follow-up, the range of motion and Böstman score of the knee joint in group A were significantly better than those in group B ( P<0.05). During follow-up, 1 patient (5.6%) in group A had one anchor mild prolapse and 3 patients (15.0%) occured internal fixation irritation in group B. But there was no significant difference in the incidence of complications between the two groups ( P>0.05). CONCLUSION For the avulsion fractures of the inferior pole of the patella, the suture anchor double-pulley technique combined with suture three-dimensional binding via bone tunnel technique has advantages of reliable fixation, small incision, avoidance of secondary operation to remove internal fixator, and fewer complications, with definite effectiveness.
Humans ; Male ; Female ; Patella/surgery* ; Suture Anchors ; Fracture Fixation, Internal/instrumentation* ; Adult ; Retrospective Studies ; Middle Aged ; Fractures, Avulsion/surgery* ; Treatment Outcome ; Young Adult ; Range of Motion, Articular ; Fracture Healing ; Adolescent ; Suture Techniques ; Knee Joint/physiopathology*

OBJECTIVE: To compare the effectiveness of using a composite loop plate to reconstruct the coracoclavicular ligament around the coracoid process and using a clavicular hook plate for fixation in treatment of Rockwood type Ⅲ acute acromioclavicular joint dislocation. METHODS: A retrospective analysis was conducted on the clinical data of 60 patients with Rockwood type Ⅲ acute acromioclavicular joint dislocation who were admitted between June 2022 and September 2023 and met the selection criteria. Among them, 30 patients were treated with the composite loop plate to reconstruct the coracoclavicular ligament around the coracoid process (loop plate group) and 30 with clavicular hook plate fixation (hook plate group). There was no significant difference in baseline data between the two groups ( P>0.05), including gender, age, injured side, cause of injury, disease duration, preoperative visual analogue scale (VAS) score for pain, and Constant-Murley score. The incision length, operation time, length of hospital stay, and the occurrence of complications during follow-up were recorded. The Constant-Murley score and VAS score were used to evaluate shoulder joint function and pain, and the differences (change values) of the indicators between before operation and at 6 months after operation were calculated for inter-group comparison. In the loop plate group, the coracoclavicular distance (CCD) on the anteroposterior X-ray films of the acromioclavicular joint was measured at 1 day and 6 months after operation to assess the loss of acromioclavicular joint reduction. RESULTS: The incision length of the loop plate group was significantly shorter than that of the hook plate group ( P<0.05). There was no significant difference in the operation time and the length of hospital stay between the two groups ( P>0.05). All incisions healed by first intention after operation. All patients were followed up 12-18 months (mean, 16.3 months). There was no significant difference in the follow-up time between groups ( P>0.05). The Constant-Murley scores and VAS scores of both groups significantly improved at 6 months after operation when compared with those before operation ( P<0.05); the differences in the change values of the two indicators between groups were significant ( P<0.05). The CCD of the loop plate group were (10.40±0.83) mm at 1 day and (10.70±0.68) mm at 6 months and no repositioning loss was observed. Three cases in the hook plate group had residual shoulder joint pain after operation. The difference in the accidence of complications between groups was not significant ( P>0.05). CONCLUSION For Rockwood type Ⅲ acute acromioclavicular joint dislocation, compared with the clavicular hook plate fixation, the composite loop plate for reconstructing the coracoclavicular ligament around the coracoid process has the advantages of simple operation, safety, minimally invasive, good functional recovery, and fewer complications. Moreover, it avoids the need for a second surgery to remove the internal fixation device, and the patient acceptance and satisfaction are higher.
Humans ; Acromioclavicular Joint/surgery* ; Bone Plates ; Male ; Retrospective Studies ; Female ; Adult ; Ligaments, Articular/injuries* ; Joint Dislocations/surgery* ; Coracoid Process/injuries* ; Treatment Outcome ; Middle Aged ; Plastic Surgery Procedures/instrumentation* ; Fracture Fixation, Internal/instrumentation* ; Young Adult ; Clavicle/surgery*

Paget's disease of bone (PDB) is a common metabolic bone disease that is characterized by aberrant focal bone remodeling, which is caused by excessive osteoclastic bone resorption followed by disorganized osteoblastic bone formation. Genetic factors are a critical determinant of PDB pathogenesis, and several susceptibility genes and loci have been reported, including SQSTM1, TNFSF11A, TNFRSF11B, VCP, OPTN, CSF1 and DCSTAMP. Herein, we report a case of Chinese familial PDB without mutations in known genes and identify a novel c.163G>C (p.Val55Leu) mutation in FKBP5 (encodes FK506-binding protein 51, FKBP51) associated with PDB using whole-exome sequencing. Mutant FKBP51 enhanced the Akt phosphorylation and kinase activity in cells. A study of osteoclast function using FKBP51V55L KI transgenic mice proved that osteoclast precursors from FKBP51V55L mice were hyperresponsive to RANKL, and osteoclasts derived from FKBP51V55L mice displayed more intensive bone resorbing activity than did FKBP51WT controls. The osteoclast-specific molecules tartrate-resistant acid phosphatase, osteoclast-associated receptor and transcription factor NFATC1 were increased in bone marrow-derived monocyte/macrophage cells (BMMs) from FKBP51V55L mice during osteoclast differentiation. However, c-fos expression showed no significant difference in the wild-type and mutant groups. Akt phosphorylation in FKBP51V55L BMMs was elevated in response to RANKL. In contrast, IκB degradation, ERK phosphorylation and LC3II expression showed no difference in wild-type and mutant BMMs. Micro-CT analysis revealed an intensive trabecular bone resorption pattern in FKBP51V55L mice, and suspicious osteolytic bone lesions were noted in three-dimensional reconstruction of distal femurs from mutant mice. These results demonstrate that the mutant FKBP51V55L promotes osteoclastogenesis and function, which could subsequently participate in PDB development.
Acid Phosphatase ; Animals ; Asian Continental Ancestry Group ; Bone Diseases, Metabolic ; Bone Remodeling ; Bone Resorption ; Femur ; Humans ; Mice ; Mice, Transgenic ; Osteitis Deformans* ; Osteoblasts ; Osteoclasts ; Osteogenesis ; Phosphorylation ; Phosphotransferases ; Tacrolimus Binding Proteins ; Transcription Factors

Objective To construct and evaluate a novel PAMAM dendrimer vector-DNA vaccine for schistosomiasis japonica.Methods Lysine was used to modify 4.0G PAMAM.and the modified product PAMAM-Lys was synthesized.Agarose gel electrophoresis was used to confirm the composite ratio of plasmid DNA and dendrimer.Micrestructure of the compound was observed by using transmission electronic microscopy,and the stability was analyzed by using electrophoresis.The viability of the cells transfected with dendrimers was evaluated by using a MTT technique in vitro.Fiftyty mice were immunized with purified plasmid pJW4303,pJW4303-Sj23 dendrimer PAMAM-Lys and compound PAMAM-Lys/pJW4303-Sj23,respectively.The specific antibodies of the mice in each group were detected to access the immunoreactivity.Results The agarese gel electrophoresis showed that when the charge ratio of the dendrimer vector and DNA was between 2 and 4,the positive and negative charges could be counteraeted completely,and the compound was blocked completely by DNA electrophoresis.The obscrvation results with transmission electronic microscopy showed that the composition of dendrimer vector and DNA caused shrink of DNA structure.Dendrimer-DNA compound had a good stability.MTT showed the modified dendrimer vector and DNA compound system produced a lower cell toxicity on 293T cell than the unmodified Ones.Thk levels of specific antibodies of the mice immunized with PAMAM-Lys/pJW4303Sj23 were significantly higher than those of the mice immunized with naked DNA vaccine(P<0.05).Conclusions The lysinemodified PAMAM-lys is an excellent vector,and has an appropriate biocompatibility.Lysine-modification can reduce the cell toxicity of PAMAM dendrimer significantly.PAMAM-Lys can enhance the immunoreactivity of DNA vacmine which merits further application in schistosomiasis DNA vaccine.

Objective To construct, express and purify human scFv antibody (S1) against the recombinant SAG1 of Toxoplasma fused to magainin, and observe its protective effect against Toxoplasma in infected mice. Methods The S1 scFv antibody gene amplified from phagmid S1/pIT-2 fused to magainin was cloned into procaryotic expression vector pET-32c. The recombinant plasmid S1M/pET-32c proved by DNA sequencing was transformed into E.coli BL21, and induced for fusion expression of S1M with IPTG. The expressed S1M was purified with Ni 2+ chelating HiTrap HP column and detected with SDS-PAGE. The effect of reduction of infection of Toxoplasma was observed through in vivo and in vitro experiments in mice. Results The fused gene of S1 and magainin was successfully cloned into procaryotic expression vector pET-32c proved by DNA sequencing. The recombinant S1M protein about 43 kDa was expressed in E.coli as inclusion body, and prepared with Ni 2+ column purification. Tachyzoite of Toxoplasma preincubated with S1M showed decreased infectivity in mice, the result of in vivo experiments showed that mice treated with S1M hadlonger survival time than the mice untreated. Conclusion The purified targeting antimicrobial peptide S1M could reduce the infectivity of tachyzoites of Toxoplasma in a certain extent and has a potential value for biological therapy of toxoplasmosis; otherwise, the constructed targeting antimic robial peptide S1M also provides a new model for biological therapy of toxoplasmosis.

In order to explore the available sero-diagnotic method for surveillance in basically controlled and controlled areas of schistosomiasis japonica, a 3 years longitudinal investigation of children 6~14 years old with COPT in 5 endemic areas was carried out after being basically controlled for 8~16 years. The results showed that the examination of children with COPT is one of the available serodiagnostic methods of schistosomiasis for surveillance. In all five areas the positive rate of children in this age group was less than 3%, and the circumoval precipitin rate among the positive cases was less than 5%. Therefore, it is indicated that the above mentioned two indexes can be used for sero-surveillance of schistosomiasis japonica.

Objective To understand the potential impact of south-north water transfer project on transmission and distribution of Schistosomiasis japonica, and to put forward the countermea-sures of prevention of the disease transferring into other places. Methods The information on the progress of south-north water transfer project and factors related to the distribution of Schistosoma juponicum were collected, and the suggestions on improving the countermeasures were obtained through the group discussions and field visits. Results The potential impact of the project on the disease transferring is existed, mainly the disease transferring will be through the Lixia River basin in Jiangsu Province, and Chaohu areas of Anhui Province in the east route, and Sihu areas of Hubei Province in the middle route. The snail transferring northward will be affected both by the project and global warming, as a result, the endemic areas of Schistosomiasis will probably transfer into the Hongzehu and Chaohu areas in the future. Conclusion In the east route of the project, if the project is not combined with Schistosomiasis control, the endemic areas of Schistosomiasis will extend into other regions, the loss in the society and economy will be very large.

Objective To predict B cell epitopes in Sj22, Sj23, Sj14-3-3, Sj26 of Schistosoma japonicum with bioinformatics, and evaluate the antigenicity of these epitope proteins. Methods The complete DNA sequences of S.japonicum were predicted by BioSun system, the target B cell epitope genes were selected, cloned and expressed. The expressed fusion proteins were detected with the sera of schistosomiasis patients and health people for evaluation of their antigenicity. Results Eight B cell epitopes from four molecules of S.japonicum were predicted. The B cell epitopes of Sj22 probably located in 56-62 and 127-133 amino acids. The B cell epitopes of Sj23 probably located in 149-156 and 160-167 amino acids. The B cell epitopes of S14-3-3 probably located in 118-125 and 130-137 amino acids. The B cell epitopes of Sj26 probably located in 143-149 and 191-197 amino acids. The predicted epitope genes were cloned into pET-32c plasmid and expressed. Three of eight expressed fusion proteins of epitopes were reacted with the sera of schistosomiasis patients but not with health people. Conclusion Three epitope antigens with potential diagnosis value are determined.