Objective To investigate the association of serum total testosterone(TT),free testosterone(FT),sex hormone-binding globulin(SHBG),and estradiol(E_2)with all-cause mortality rate(AMR)in males and to evaluate their predictive value. Methods Based on data from the National Health and Nutrition Examination Survey(NHANES)cycles(1999—2004 and 2013—2016),the relationships between different sex hormones and AMR was analyzed with Cox proportional hazards regression models. The dose-response relationships between different sex hormones and male AMR were assessed with restricted cubic splines(RCS). The predictive performances of different sex hormones for male AMR were compared with receiver operating characteristic(ROC)curves and the area under the curve(AUC). The survival differences across varying sex hormone levels were evaluated with Kaplan-Meier survival curves and log-rank tests. Results This study involved 3632 adult male participants with a median follow-up of 6.5 years,during which 320 AMR occurred(8.8%). Cox univariate analysis indicated that TT,FT and SHBG were risk factors for AMR(P＜0.001). Cox multivariate analysis revealed that FT and SHBG were independent risk factors for AMR(FT:HR=0.90,95%CI:0.86-0.94; SHBG:HR=1.01,95%CI:1.01-1.02). RCS revealed a U-shaped nonlinear relationship between TT,FT and AMR(P＜0.001); SHBG showed a positive dose-response relationship with AMR(P＜0.001). The AUCs of FT predicting the 5-year,10-year,and 15-year AMR were 0.78(95%CI:0.73-0.82),0.80(95%CI:0.76-0.84),and 0.84(95%CI: 0.80-0.88),respectively,significantly outperforming other indicators. Subgroup analysis revealed that FT was negatively correlated with male AMR,but this association was modulated by age,race,smoking status and diabetes status(P_(interaction)＜0.05). Kaplan-Meier survival analysis showed that different levels of TT and FT(Q1-Q4)were significantly positively correlated with survival rate(P＜0.001),while different levels of SHBG were significantly negatively correlated with survival rate,with patients in the Q4 group having the highest risk of death(P＜0.001). Conclusion Based on US NHANES,studies have shown that the FT and SHBG are independent risk factors for male AMR,and FT demonstrates greater predictive value for male AMR than TT.

BACKGROUND:Condylar prosthesis replacement,as one of the surgical methods for the treatment of temporomandibular joint diseases,not only needs to restore the morphology and function,but also needs to ensure long-term stable application.OBJECTIVE:To design finite element analysis of a customized Gyroid condylar prosthesis.METHODS:Gyroid structure specimens with different wall thicknesses(250,350,450,550,650,and 750 μm)were designed by software.Finite element simulation compression experiments were carried out to test the elastic modulus of the specimens.The Gyroid structure wall thickness range that matches the elastic modulus of mandibular cancellous bone and whose pore size meets the osteogenesis conditions was screened out.This range was subdivided and Gyroid structure specimens were made using 3D printing technology.Mechanical compression experiments were carried out on a universal testing machine.The Gyroid structure wall thickness that meets the mechanical properties of mandibular bone,has an easier osteogenesis and a smaller strength was screened out by elastic modulus and compressive strength,and subsequent experiments were carried out.A three-dimensional model of a customized Gyroid condylar prosthesis was designed,and the finite element analysis of the blade jaw position and cusp interdigitation position of the model under natural occlusion was simulated.RESULTS AND CONCLUSION:(1)Finite element analysis results showed that with the increase of wall thickness,the elastic modulus of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 350,450,550,650,and 750 μm matched the elastic modulus of mandibular cancellous bone.Since the subsequent experiments needed to be subdivided into groups and the pore size of the 550,650,and 750 μm wall thickness group(pore size 800-1 000 μm)was within the osteogenesis range.Gyroid structure specimens with wall thickness of 550,600,650,700,and 750μm were selected for mechanical compression experiments on a universal testing machine.(2)The results of mechanical compression experiments showed that with the increase of wall thickness,the elastic modulus and compressive strength of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 550,600,and 650 μm was within the elastic modulus of the mandibular cancellous bone.Finally,the wall thickness of 650 μm and the pore size of 900 μm were selected to construct the three-dimensional model of the mandibular customized Gyroid condylar prosthesis.(3)The results of finite element analysis of three-dimensional model of the mandibular customized Gyroid condylar prosthesis showed that the stress of the articular disc in the edge-to-edge occlusion was mainly concentrated on the lower surface of the anterior middle band,and the stress of the articular disc in the interposition of tooth tips was mainly concentrated on the lateral surface of the lower surface.The maximum displacement and the maximum equivalent stress of the left and right articular discs in the edge-to-edge occlusion and the interposition of tooth tips were similar.The maximum displacement was 0.031,0.030,0.028,and 0.018 mm,and the maximum equivalent stress was 2.87,2.30,2.73,and 1.71 MPa,respectively.(4)The results showed that the Gyroid structure with a wall thickness of 650 μm was consistent with the mechanical properties of the mandible,which reduced the strength of the titanium alloy and reduced the damage of the articular disc caused by the customized Gyroid condylar prosthesis.

Objective:To compare the efficacy and safety of flow diverter (FD) implantation versus stent-assisted coil embolization (SACE) in unruptured saccular aneurysms located at distal segments of the Willis circle.Methods:A retrospective study was performed; 119 patients with unruptured saccular aneurysms located at distal segments of the Willis circle who received FD implantation or SACE in Department of Neurosurgery, Guangdong Provincial People's Hospital, Southern Medical University and Department of Cerebrovascular Surgery, Neurosurgery Center, Southern Medical University from January 2018 to May 2025 were selected. According to different surgical methods, they were divided into a FD group ( n=60) and a SACE group ( n=59). These patients were subjected to propensity score matching (PSM) using 1:1 nearest neighbor matching method to eliminate confounding factors such as gender, age, aneurysm location, and aneurysm diameter (maximum diameter); and then, differences in neurological functional prognosis (good prognosis: modified Rankin scale scores of 0-2), complete aneurysm occlusion rate (O'Kelly-Marotta grade D or Raymond occlusion classification class I), and overall (perioperative and follow-up) complications were compared between the two groups. Results:After PSM, there were 43 patients in both FD group and SACE group. No significant difference was found in clinical and imaging follow-ups (12[6, 19] months vs. 10[6, 15] months, 10[5, 19] months vs. 9[2, 15] months) between the FD group and SACE group ( P>0.05). At the last imaging follow-up, the complete aneurysm occlusion rate in the FD group (65.1%[28/43]) was significantly lower than that in the SACE group (76.7%[33/43], P<0.05). At the last clinical follow-up, no significant difference was noted in good prognosis rate (95.3%[41/43] vs. 97.7%[42/43]) and overall complication rate (30.2%[13/43] vs. 18.6%[8/43]) between the FD group and SACE group ( P>0.05). Conclusion:Both FD implantation and SACE are safe and effective for unruptured saccular aneurysms located at distal segments of the Willis circle; the complete aneurysm occlusion rate within 1 year of FD implantation is relatively low.

Objective:To explore the lived experiences of family members of terminal ICU patients regarding their humanistic care needs and provide theoretical foundations for developing nursing care plans tailored to their needs.Methods:This study was a descriptive qualitative study. From April to December 2023, 16 family members of terminally ill ICU patients in Shanghai East Hospital, Tongji University were selected for semi-structured interviews using purposive sampling method, and the interview data were qualitatively analyzed using Colaizzi 7-step analysis.Results:The humanistic care needs of family members of terminally ill ICU patients can be categorized into five themes, namely, the need to know the condition at the first time; the need to participate in treatment and decision-making; the need to respect the wishes of terminally ill patients; the need for psychological care; and the need for social support.Conclusions:The humanistic care needs of family members of terminal ICU patients remain largely unmet. Nursing professionals should consider these needs and preferences and provide family members with professional guidance to help them establish positive coping mechanisms.

Objective:To explore the diagnostic value of a clinical-radiomics model based on the T 1 mapping and apparent diffusion coefficient (ADC)-based radiomics, and the clinical indicator for renal fibrosis (RF) caused by chronic kidney disease (CKD). Methods:This cross-sectional study prospectively and consecutively enrolled 122 patients with CKD at the Second Affiliated Hospital of Soochow University from September 2021 to December 2023 who were randomly allocated to a training set ( n=85) or a validation set ( n=37) in an approximate 7∶3 ratio using simple random sampling. Patients underwent T 1 mapping and diffusion-weighted imaging scans. Renal biopsy was performed within 3 days after the MRI scans. Patients were categorized into three groups based on the degree of RF: no RF ( n=25), mild RF ( n=55), and moderate to severe RF ( n=42). To differentiate the presence of RF (no RF vs. any RF) and the severity of RF (mild RF vs. moderate to severe RF), univariate and multivariate logistic regression were used to optimize the independent clinical predictor, which constituted the clinical model. Radiomics features were extracted from regions of interest delineated within the renal parenchyma of the right kidney on T 1 mapping and ADC maps. Features were selected using least absolute shrinkage and selection operator regression to build the radiomics model. A clinical-radiomics model was subsequently constructed by integrating the independent clinical predictors with the selected radiomics features. Model diagnostic performance was evaluated using the area under the receiver operating characteristic curve (AUC). Calibration curve was plotted to assess model calibration, and decision curve analysis was performed to evaluate clinical net benefit. Results:Univariate logistic regression analysis revealed that estimated glomerular filtration rate (eGFR), serum creatinine, and blood urea nitrogen exhibited statistically significant differences ( P0.05) in distinguishing both the presence and severity of RF. Multivariate analysis identified eGFR as an independent clinical predictor for both the presence of RF ( OR=0.939, 95% CI 0.898-0.982, P=0.006) and RF severity ( OR=0.956, 95% CI 0.917-0.997, P=0.037). From the MRI images, 7 radiomics features were selected to build the radiomics model for distinguishing the presence of RF, and 8 features were selected for the model assessing RF severity. These radiomics models were then combined with eGFR to construct the clinical-radiomics models. The clinical-radiomics models demonstrated the highest diagnostic performance, with an AUC of 0.935 (95% CI 0.859-0.977) for RF presence and 0.967 (95% CI 0.891-0.995) for RF severity in the training set, and 0.914 (95% CI 0.774-0.981) and 0.908 (95% CI 0.748-0.981) in the validation set. Calibration curves and decision curve analysis confirmed that the clinical-radiomics models exhibited excellent calibration and provided the highest clinical net benefit for assessing RF in CKD patients. Conclusion:The clinical-radiomics model integrating T 1 mapping and ADC-based radiomics and eGFR can effectively improve the diagnostic performance for RF in CKD patients.

BACKGROUND:Based on the principle of vertical tooth movement,a personalized orthodontic appliance is created through digital design combined with 3D printing,so that the personalized orthodontic appliance forms a support system with the individual incisors.With the help of the absolute support of the micro-implant,the single tooth is precisely controlled in a three-dimensional direction.OBJECTIVE:To design personalized orthodontic appliances with 11,12,21,and 22 intrusion and extrusion based on biomechanical principles,and analyze the safety of the personalized orthodontic appliances in terms of their movement effect on the teeth by means of the three-dimensional finite element method.METHODS:Three-dimensional finite element models of alveolar bone-periodontium-maxillary incisors-personalized cantilever micro-implant-connecting plates-personalized brackets in the maxillary anterior region(teeth numbers 11,12,21,and 22)were established using Mimics,Geomagic Wrap,SolidWorks,and Ansys Workbench software,respectively.Personalized orthodontic appliances with low pressure movement and extended movement were set up at each tooth position.The stress level of each component of the personalized orthodontic appliances was analyzed,and the tooth displacement and periodontal stress distribution were calculated under loading of 300 g tensile or thrust force.RESULTS AND CONCLUSION:(1)The maximum equivalent force on the personalized intrusion mobile orthodontic appliance was 162.90 MPa,and the maximum equivalent force on the personalized extrusion mobile orthodontic appliance was 239.57 MPa.The maximum equivalent stress on both devices was located in the vertical portion of the personalized bracket loading attachment.The equivalent stresses on each part of the personalized orthodontic appliance were all within the yield strength,and they had good safety.(2)The initial displacement of the teeth under the action of the personalized orthodontic appliances showed a tendency towards overall intrusion or extrusion,with the displacement in the vertical direction far exceeding that in the horizontal and sagittal directions.The equivalent stress peak appeared at the root tip or neck of the periodontal membrane,and the equivalent stress concentration area appeared in the periodontal membrane of the root apical region.(3)The results show that the personalized orthodontic appliance allows 11,12,21,and 22 to approximate either intrusion movement or extrusion movement,initially confirming the effectiveness of the personalized vertical movement orthodontic appliance.

BACKGROUND:Currently,the mandibular joint prosthesis manufactured at home and abroad needs to rely on screws to fix the condylar part of the prosthesis during the replacement process,and the retention hole is reserved to facilitate the operation during the operation.However,due to the lack of personalized jaw design,the reattachment plate may not fit the jaw,resulting in screw loosening and dislocation.Therefore,personalized condylar prosthesis replacement is of great value in the repair of the temporomandibular joint.OBJECTIVE:To design a personalized condylar prosthesis with an internal GYROID for mandibular condylar repair and reconstruction.METHODS:The GYROID structure was selected in the Rhinoceros 7 software with the single cell size of 6 mm and the wall thickness of 0.2,0.3,0.4,0.5,0.6,0.7,0.8 mm.The mechanical properties of the GYROID structure were analyzed by finite element method.3D printing of GYROID structural test specimens with different wall thickness(0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was performed to test the mechanical properties of the specimens through room temperature compression experiments.A wall thickness value conforming to the range of mandibular mechanical properties was selected through finite element analysis and room temperature compression test results.An adult male mandibular CT data were used for inverse modeling to design a condylar prosthesis with an internal GYROID.Finite element analysis was used to simulate the movement of the apical staggered position and the opposite-blade jaw position after condylar prosthesis replacement.RESULTS AND CONCLUSION:(1)The results of finite element analysis and room temperature compression experiment showed that the elastic modulus of the GYROID structure increased with the increase of wall thickness.The elastic modulus of the GYROID structure with wall thickness of 0.5-0.7 mm was within the range of the elastic modulus of the mandible(1.5-4.0 GPa).Therefore,the 6 mm monocellular GYROID structural model with a wall thickness of 0.6 mm was selected for the design of the condylar prosthesis.(2)The results of finite element analysis showed that the stress distribution of mandibular model was symmetrical.The stress distribution of the two types of occlusion was roughly the same,and the stress peak was not significantly different.The stress concentrated in the neck of the condylar prosthesis,and the stress on the replacement side was slightly larger than that on the healthy side.The maximum equivalent stress of the whole internal fixation model was 269.34 MPa,and the maximum equivalent stress of the screw was 20.14 MPa.The equivalent stress and equivalent strain values of the prosthesis were greater than that of the opposite edge jaw position when the tooth tip was interlaced.The equivalent stress and equivalent strain values of the screw were smaller than that of the opposite edge jaw position when the tooth tip was interlaced.(3)The results showed that the design and retention of the personalized GYROID condylar prosthesis were good,which was consistent with the mechanical conduction of the mandible.

BACKGROUND:Porous structures based on triple periodic minimal surfaces are one of the most promising orthopedic biostructures,among which the Gyroid structure is characterized by high specific surface area,high permeability,and zero mean curvature.OBJECTIVE:To screen the wall thickness interval of TC4 bionic bone scaffolds with 4 mm single-cell Gyroid structure matching the elastic modulus range of cancellous bone of the mandible through finite element analysis combined with mechanical compression test testing.METHODS:The finite element model of the 4 mm single-cell Gyroid structure with different wall thickths(0.1,0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was established.The equivalent elastic modulus of the Gyroid structure was analyzed,and the wall thickness interval of the Gyroid structure matching the elastic modulus range of the maxillary resinous bone was selected with different wall thicknesses of 0.2,0.3,0.4,0.5,0.6,and 0.7 mm,respectively.According to finite element analysis screening results,the material selected was Ti6Al4V.Selective laser melting was used to prepare 3D printed Gyroid structure specimens.The surface treatment was carried out by large-grained sand blasting and acid etching.The elastic modulus and compressive strength of the specimen were tested by mechanical compression experiment.RESULTS AND CONCLUSION:(1)The finite element analysis results showed that the equivalent elastic modulus of the Gyroid structure increased with the increase of wall thickness,and the equivalent elastic modulus of the Gyroid structure with wall thickness of 0.2-0.7 mm was within the range of the elastic modulus of the spongy bone of the mandible(1.5-4.0 GPa),which was used for 3D printing of the Gyroid structure specimen.(2)The mechanical compression test results showed that the elastic modulus and compressive strength of the Gyroid structural specimen increased with the increase of wall thickness,and the elastic modulus of the Gyroid structural specimen with wall thickness of 0.3-0.5 mm was within the range of the elastic modulus of the cancellous bone of the mandible.The compressive strength of the Gyroid specimen with 0.3-0.7 mm wall thickness was consistent with the mechanical properties of the mandible.(3)The results show that the Gyroid structure of 0.3-0.5 mm wall thickness is compatible with the range of elastic modulus of the mandible.

Objective This study aims to investigate the effects of acupuncture on the spatial learning and memory capacities,the morphological characteristics of hippocampal neurons,the components of extracellular matrix,as well as the structure of the blood-brain barrier in SAMP8 mice.Moreover,it endeavors to explore the underlying mechanism through which the"Tongdu Qishen"(activating governor vessel and awakening spirit)acupuncture method ameliorates the cognitive function and modulates cerebral blood flow in SAMP8 mice.Methods Twenty 6-month-old male SAMP8 mice were randomly allocated into a model group and an electroacupuncture group,with ten mice in each group.Additionally,ten homologous 6-month-old male SAMR1 mice were designated as the normal control group.In the electroacupuncture group,the acupoint"Renzhong"(GV 26)was punctured using a quick insertion technique,while"Baihui"(GV 20)and"Yintang"(EX-HN 3)were punctured via a transverse insertion method.Subsequently,the needle handles were connected to an electroacupuncture apparatus,which was set to operate with a dense-sparse wave at a frequency of 100 Hz/2 Hz and an electric current of 2 mA.Each session of acupuncture lasted for 20 minutes and was conducted once a day for a consecutive period of 28 days.The normal group,the model group,and the electroacupuncture group all underwent identical fixation and restraint procedures to ensure consistent experimental conditions.The Morris water maze was employed to evaluate the spatial learning and memory abilities of the mice.The Nissl staining technique was utilized to assess the alterations in hippocampal neurons of SAMP8 mice.The laser speckle imaging system was adopted to measure the cerebral blood flow of the mice in each group.Transmission electron microscopy was applied to observe the ultrastructure of the blood-brain barrier within the frontal cortex tissue of the SAMP8 mice's brains.The Western blotting method was used to detect the expressions of Collagen-Ⅳ and Fibronectin in the brain tissues of SAMP8 mice.Results In comparison with the model group,the"Tongdu Qishen"acupuncture method demonstrated a significant efficacy in improving the spatial learning and memory abilities of SAMP8 mice(P<0.05).It also effectively alleviated the degeneration of hippocampal neurons,remarkably increased the cerebral blood flow perfusion volume of SAMP8 mice(P<0.05),ameliorated the damage to the blood-brain barrier structure,significantly upregulated the content of Collagen-Ⅳ(P<0.05),and significantly downregulated the content of Fibronectin(P<0.0001).Conclusion The"Tongdu Qishen"acupuncture method is capable of favorably regulating the extracellular matrix of SAMP8 mice,thereby improving cerebral blood flow and ultimately enhancing their learning and memory abilities.

Objective:To explore the diagnostic value of a clinical-radiomics model based on the T 1 mapping and apparent diffusion coefficient (ADC)-based radiomics, and the clinical indicator for renal fibrosis (RF) caused by chronic kidney disease (CKD). Methods:This cross-sectional study prospectively and consecutively enrolled 122 patients with CKD at the Second Affiliated Hospital of Soochow University from September 2021 to December 2023 who were randomly allocated to a training set ( n=85) or a validation set ( n=37) in an approximate 7∶3 ratio using simple random sampling. Patients underwent T 1 mapping and diffusion-weighted imaging scans. Renal biopsy was performed within 3 days after the MRI scans. Patients were categorized into three groups based on the degree of RF: no RF ( n=25), mild RF ( n=55), and moderate to severe RF ( n=42). To differentiate the presence of RF (no RF vs. any RF) and the severity of RF (mild RF vs. moderate to severe RF), univariate and multivariate logistic regression were used to optimize the independent clinical predictor, which constituted the clinical model. Radiomics features were extracted from regions of interest delineated within the renal parenchyma of the right kidney on T 1 mapping and ADC maps. Features were selected using least absolute shrinkage and selection operator regression to build the radiomics model. A clinical-radiomics model was subsequently constructed by integrating the independent clinical predictors with the selected radiomics features. Model diagnostic performance was evaluated using the area under the receiver operating characteristic curve (AUC). Calibration curve was plotted to assess model calibration, and decision curve analysis was performed to evaluate clinical net benefit. Results:Univariate logistic regression analysis revealed that estimated glomerular filtration rate (eGFR), serum creatinine, and blood urea nitrogen exhibited statistically significant differences ( P0.05) in distinguishing both the presence and severity of RF. Multivariate analysis identified eGFR as an independent clinical predictor for both the presence of RF ( OR=0.939, 95% CI 0.898-0.982, P=0.006) and RF severity ( OR=0.956, 95% CI 0.917-0.997, P=0.037). From the MRI images, 7 radiomics features were selected to build the radiomics model for distinguishing the presence of RF, and 8 features were selected for the model assessing RF severity. These radiomics models were then combined with eGFR to construct the clinical-radiomics models. The clinical-radiomics models demonstrated the highest diagnostic performance, with an AUC of 0.935 (95% CI 0.859-0.977) for RF presence and 0.967 (95% CI 0.891-0.995) for RF severity in the training set, and 0.914 (95% CI 0.774-0.981) and 0.908 (95% CI 0.748-0.981) in the validation set. Calibration curves and decision curve analysis confirmed that the clinical-radiomics models exhibited excellent calibration and provided the highest clinical net benefit for assessing RF in CKD patients. Conclusion:The clinical-radiomics model integrating T 1 mapping and ADC-based radiomics and eGFR can effectively improve the diagnostic performance for RF in CKD patients.