Objective To investigate the prevalence of comorbid chronic diseases among advanced schistosomiasis patients in Suzhou City, so as to provide insights into formulation of the scheme for medical assistance management of advanced schistosomiasis patients. Methods All data pertaining to survival advanced schistosomiasis patients in Suzhou City were retrieved from the Information Management Platform of Schistosomiasis (Parasitic Diseases) in Jiangsu Province as of August 19, 2024. These patients' outpatient and inpatient records from January 1, 2017, to August 19, 2024, were collected through Suzhou Municipal Health Statistics Information Center. The prevalence of comorbid chronic diseases was analyzed, and the comorbid patterns of chronic diseases were identified using cluster analysis. Results A total of 1 868 advanced schistosomiasis patients were enrolled in Suzhou City, with a mean age of (79.20 ± 7.17) years, and the median types of prevalent comorbid chronic diseases was 5 (interquartile range, 5). The mean age [(80.13 ± 7.09) years vs. (77.49 ± 7.02) years; t = 7.70, P < 0.001] and median types of prevalent comorbid chronic diseases [5 (interquartile range, 4) vs. 4 (interquartile range, 5); Z = 436 745, P < 0.001] were both higher among female advanced schistosomiasis patients than among male cases. The prevalence of comorbid chronic diseases was 84.96% (1 587/1 868) among advanced schistosomiasis patients in Suzhou City, and the prevalence was higher among female cases than among male cases [86.58%, (1 052/1 215) vs. 81.93% (535/653); χ² = 7.20, P = 0.007]. The prevalence of comorbid chronic diseases appeared a tendency towards a rise with age among male advanced schistosomiasis patients (χ²_trend = 7.63, P = 0.006) and a decline among female patients (χ²_trend = 10.59, P = 0.001). The prevalence of comorbid chronic diseases was higher among female advanced schistosomiasis patients at ages of 70 to 80 years than among male cases at the same age group [90.18% (459/509) vs. 80.61% (266/330); χ² = 14.81, P < 0.001]. The three most common comorbid chronic diseases included hypertension (67.83%), chronic gastric disorders (57.28%) and heart disease (44.00%) among advanced schistosomiasis patients in Suzhou City. The comorbidity rates of chronic gastric diseases (χ² = 5.33, P < 0.05), heart diseases (χ² = 4.15, P < 0.05), stroke (χ² = 10.68, P < 0.05), arthritis or rheumatic disease (χ² = 7.13, P < 0.05), osteoporosis (χ² = 39.51, P < 0.05), and memory-related diseases (χ² = 7.00, P < 0.05) were higher among female advanced schistosomiasis patients than among male cases, and the comorbidity rate of malignant tumors was higher among male cases than among female cases (10.26% vs. 7.41%; χ² = 4.13, P = 0.042). The cluster dendrogram showed that advanced schistosomiasis patients' comorbid chronic diseases in Suzhou City were mainly divided into three clusters: (1) hypertension, chronic gastric diseases; (2) chronic pulmonary diseases, arthritis or rheumatic diseases, osteoporosis, chronic liver diseases, heart diseases, and stroke; and (3) diabetes, sleep disorders, gallbladder diseases, over-weight and obesity, atopic dermatitis, chronic kidney diseases, mental and psychological diseases, malignant tumors, asthma, and memory-related diseases. Conclusions There are multiple types of comorbid chronic diseases among advanced schistosomiasis patients in Suzhou City, with high prevalence, which necessitates the implementation of effective preventive measures and interventions targeting comorbid chronic diseases among advanced schistosomiasis patients.

Objective:To investigate the efficacy of hybrid fixation with tibial prosthesis in primary total knee arthroplasty (TKA) in patients with osteoporosis or osteopenia.Methods:A total of 39 patients (42 knees) with knee osteoarthritis who underwent primary TKA with hybrid fixation with tibial prosthesis in the First Affiliated Hospital of Zhejiang University from November 2022 to June 2024 were retrospectively analyzed. There were 12 males and 27 females with an average age of 68.23±7.02 years (range, 58-89 years). The mean body mass index was 26.15±4.63 kg/m 2 (range, 19.48-39.03 kg/m 2), and the mean bone mineral density T score was -2.38±0.78 (from -4.2 to -1.2). The left knee was 19, and the right knee was 23. The visual analogue scale (VAS) and Knee Society score (KSS) were used to evaluate the knee joint pain and function, and the knee flexion range of motion was measured. Radiographic evaluation included hip-knee-ankle angle, lateral distal femoral angle, and posterior slope of tibial plateau. Results:All patients successfully completed the operation and were followed up for 19.8±5.1 months (range, 4.9-23.6 months). All patients were treated with hybrid fixation with tibial prosthesis assisted by 3D printed porous titanium alloy sleeve. The operation time was 73.8±10.8 min (range, 54-98 min). Thirty-four of 39 patients received standard anti-osteoporosis therapy before operation. The VAS score at the last follow-up was 0(0, 1), which was lower than that before operation 7(6,8), and the difference was statistically significant ( U<0.001, Ρ<0.001). The KSS clinical score at the last follow-up was 76.67±10.04, which was higher than that before operation (50.95±7.35), and the difference was statistically significant ( t=12.030, Ρ<0.001). The knee flexion range of motion at last follow-up was 97.26°±12.94°, showing no significant difference when compared with preoperative 94.52°±16.52° ( t=0.846, Ρ=0.400). The hip-knee-ankle angle at last follow-up was 176.2°±2.54°, which was significantly higher than that before operation 173.5°±5.25° ( t=3.328, Ρ=0.002). The distal lateral femoral and posterior tibial inclination angles at the final follow-up were 89.58°±1.62° and 2.85°±0.91°, respectively, compared with 90.71°±4.01° and 3.05°±1.25° preoperatively, with no statistically significant differences ( t=1.556, Ρ=0.127; t=0.923, Ρ=0.359). No prosthesis loosening, dislocation, periprosthetic infection, deep vein thrombosis and other complications occurred. Conclusion:Hybrid fixation with tibial prosthesis in primary TKA for patients with osteoporosis or osteopenia has a satisfactory clinical effect, which can relieve knee pain and improve joint function.

Objective:To investigate the efficacy of hybrid fixation with tibial prosthesis in primary total knee arthroplasty (TKA) in patients with osteoporosis or osteopenia.Methods:A total of 39 patients (42 knees) with knee osteoarthritis who underwent primary TKA with hybrid fixation with tibial prosthesis in the First Affiliated Hospital of Zhejiang University from November 2022 to June 2024 were retrospectively analyzed. There were 12 males and 27 females with an average age of 68.23±7.02 years (range, 58-89 years). The mean body mass index was 26.15±4.63 kg/m 2 (range, 19.48-39.03 kg/m 2), and the mean bone mineral density T score was -2.38±0.78 (from -4.2 to -1.2). The left knee was 19, and the right knee was 23. The visual analogue scale (VAS) and Knee Society score (KSS) were used to evaluate the knee joint pain and function, and the knee flexion range of motion was measured. Radiographic evaluation included hip-knee-ankle angle, lateral distal femoral angle, and posterior slope of tibial plateau. Results:All patients successfully completed the operation and were followed up for 19.8±5.1 months (range, 4.9-23.6 months). All patients were treated with hybrid fixation with tibial prosthesis assisted by 3D printed porous titanium alloy sleeve. The operation time was 73.8±10.8 min (range, 54-98 min). Thirty-four of 39 patients received standard anti-osteoporosis therapy before operation. The VAS score at the last follow-up was 0(0, 1), which was lower than that before operation 7(6,8), and the difference was statistically significant ( U<0.001, Ρ<0.001). The KSS clinical score at the last follow-up was 76.67±10.04, which was higher than that before operation (50.95±7.35), and the difference was statistically significant ( t=12.030, Ρ<0.001). The knee flexion range of motion at last follow-up was 97.26°±12.94°, showing no significant difference when compared with preoperative 94.52°±16.52° ( t=0.846, Ρ=0.400). The hip-knee-ankle angle at last follow-up was 176.2°±2.54°, which was significantly higher than that before operation 173.5°±5.25° ( t=3.328, Ρ=0.002). The distal lateral femoral and posterior tibial inclination angles at the final follow-up were 89.58°±1.62° and 2.85°±0.91°, respectively, compared with 90.71°±4.01° and 3.05°±1.25° preoperatively, with no statistically significant differences ( t=1.556, Ρ=0.127; t=0.923, Ρ=0.359). No prosthesis loosening, dislocation, periprosthetic infection, deep vein thrombosis and other complications occurred. Conclusion:Hybrid fixation with tibial prosthesis in primary TKA for patients with osteoporosis or osteopenia has a satisfactory clinical effect, which can relieve knee pain and improve joint function.

Objective:To investigate the predictive value and risk relationship of preoperative serum high-density lipoprotein cholesterol (HDL-C), milk fat globule-epidermal growth factor 8 (MFG-E8), and 24-hour postoperative lactate load in acute kidney injury (AKI) following cardiac valve surgery.Methods:A retrospective analysis was conducted on 60 patients who underwent cardiac valve surgery at the Cardiovascular Surgery Department of Yan′an University Affiliated Hospital from January 2020 to December 2023 and developed postoperative AKI (AKI group). Another 60 patients who underwent the same surgery during the same period but did not develop AKI were selected as the control group. Preoperative and postoperative laboratory results and general clinical data were compared between the two groups. Receiver operating characteristic (ROC) curve analysis was used to evaluate the predictive value of preoperative serum HDL-C, MFG-E8, and 24-hour postoperative lactate load for AKI. A logistic regression model was employed to analyze the risk relationship between these three indicators and AKI.Results:The AKI group had significantly lower preoperative serum HDL-C [(1.06±0.13)mmol/L] and MFG-E8 [(413.6±73.0)ng/L] compared with the control group [HDL-C (1.15±0.18)mmol/L, MFG-E8 (461.8±85.7)ng/L], while the 24-hour postoperative lactate load [(155.8±29.0)mmol/L] was significantly higher than that of the control group [(128.1±25.0)mmol/L] (all P<0.05). The area under the ROC curve (AUC) values for preoperative HDL-C, MFG-E8, and 24-hour postoperative lactate load in predicting AKI following cardiac valve surgery were 0.642, 0.611, and 0.818, respectively. Logistic regression analysis revealed that decreased preoperative HDL-C ( OR=0.822), decreased preoperative MFG-E8 ( OR=0.674), increased 24-hour postoperative lactate load ( OR=1.781), prolonged cardiopulmonary bypass time ( OR=1.848), prolonged aortic cross-clamp time ( OR=1.470), elevated preoperative serum creatinine (Scr) ( OR=1.941), and increased 24-hour postoperative fluid balance ( OR=1.775) were independent risk factors for AKI following cardiac valve surgery (all P<0.05). Conclusions:Patients who developed AKI after cardiac valve surgery had lower preoperative serum HDL-C and MFG-E8 levels and higher 24-hour postoperativelactate load. Among these, the 24-hour postoperative lactate load demonstrated significant predictive value for AKI, and all three indicators were closely associated with AKI occurrence.

Objective:To investigate the predictive value and risk relationship of preoperative serum high-density lipoprotein cholesterol (HDL-C), milk fat globule-epidermal growth factor 8 (MFG-E8), and 24-hour postoperative lactate load in acute kidney injury (AKI) following cardiac valve surgery.Methods:A retrospective analysis was conducted on 60 patients who underwent cardiac valve surgery at the Cardiovascular Surgery Department of Yan′an University Affiliated Hospital from January 2020 to December 2023 and developed postoperative AKI (AKI group). Another 60 patients who underwent the same surgery during the same period but did not develop AKI were selected as the control group. Preoperative and postoperative laboratory results and general clinical data were compared between the two groups. Receiver operating characteristic (ROC) curve analysis was used to evaluate the predictive value of preoperative serum HDL-C, MFG-E8, and 24-hour postoperative lactate load for AKI. A logistic regression model was employed to analyze the risk relationship between these three indicators and AKI.Results:The AKI group had significantly lower preoperative serum HDL-C [(1.06±0.13)mmol/L] and MFG-E8 [(413.6±73.0)ng/L] compared with the control group [HDL-C (1.15±0.18)mmol/L, MFG-E8 (461.8±85.7)ng/L], while the 24-hour postoperative lactate load [(155.8±29.0)mmol/L] was significantly higher than that of the control group [(128.1±25.0)mmol/L] (all P<0.05). The area under the ROC curve (AUC) values for preoperative HDL-C, MFG-E8, and 24-hour postoperative lactate load in predicting AKI following cardiac valve surgery were 0.642, 0.611, and 0.818, respectively. Logistic regression analysis revealed that decreased preoperative HDL-C ( OR=0.822), decreased preoperative MFG-E8 ( OR=0.674), increased 24-hour postoperative lactate load ( OR=1.781), prolonged cardiopulmonary bypass time ( OR=1.848), prolonged aortic cross-clamp time ( OR=1.470), elevated preoperative serum creatinine (Scr) ( OR=1.941), and increased 24-hour postoperative fluid balance ( OR=1.775) were independent risk factors for AKI following cardiac valve surgery (all P<0.05). Conclusions:Patients who developed AKI after cardiac valve surgery had lower preoperative serum HDL-C and MFG-E8 levels and higher 24-hour postoperativelactate load. Among these, the 24-hour postoperative lactate load demonstrated significant predictive value for AKI, and all three indicators were closely associated with AKI occurrence.

BACKGROUND:Osteochondral defect of the joint is a difficult problem faced by orthopedic surgeons,and traditional repair methods are difficult to obtain satisfactory curative effects.Hydroxyapatite-polyvinyl alcohol-based composite hydrogel material is a direction of current research. OBJECTIVE:To prepare hydroxyapatite-polyvinyl alcohol/collagen-chitosan-gelatin composite hydrogel material and characterize its physical characteristics,to verify its histocompatibility and cell adhesion and proliferation ability after implantation in vivo,and explore its repair effect on rabbit osteochondral defects. METHODS:The cylindrical porous poly(lactic acid)scaffold was prepared by 3D printing technology(the pore sizes were 1.2,1.4,1.6 and 1.8 mm,respectively).The poly(lactic acid)scaffold was injected with polyvinyl alcohol and hydroxyapatite mixed emulsion.After freezing thawing and dichloromethane dissolution,hydroxyapatite-polyvinyl alcohol hydrogel was prepared.Then,the collagen-chitosan-gelatin mixture was injected into the hydroxyapatite-polyvinyl alcohol hydrogel and crosslinked with genipin.Finally,the hydroxyapatite-polyvinyl alcohol/collagen-chitosan-gelatin composite hydrogel was prepared by alcohol cleaning and freeze-drying.The physical characteristics of the four groups of hydrogels were characterized,and the hydrogels with the best performance were screened for follow-up experiments.Hydroxyapatite-polyvinyl alcohol hydrogel and collagen-chitosan-gelatin composite hydrogel were implanted subcutaneously in SD rats.Hematoxylin-eosin staining and Masson staining were used to observe the adhesion growth of cells on the material surface.Osteochondral defect(diameter:5 mm,depth:6 mm)models were made in the femoral trochlea of bilateral knee joints of 15 rabbits.The composite hydrogel was implanted on the left side(experimental group),while no material was implanted on the right side(control group).Micro-CT and histology were used to evaluate the repair effect of osteochondral defects. RESULTS AND CONCLUSION:(1)Based on the results of porosity,water content,mechanical testing and scanning electron microscopy,it was concluded that the hydroxyapatite-polyvinyl alcohol/collagen-chitosan-gelatin composite hydrogel with a pore size of 1.2 mm was more consistent with the general characteristics of natural cartilage,which was used for subsequent experiments.(2)Hematoxylin-eosin staining and Masson staining exhibited that with the extension of subcutaneous implantation time of the materials,the adhesion of cells around the two materials increased significantly,and the proliferation of cells after the implantation of collagen-chitosan-gelatin was better,a large number of cells could be seen growing into the formed network structure,and the network structure was gradually degraded.(3)In the rabbit osteochondral defect experiment,8 weeks after surgery,Micro-CT examination demonstrated that the material implanted in the experimental group had good integration with the surrounding bone-cartilage,with some bone growth on the surface and inside,while the cartilage and subcartilage in the control group still had obvious defects,without effective repair.Hematoxylin-eosin staining and toluidine blue staining displayed that the composite hydrogel in the experimental group integrated with the surrounding articular cartilage 4-8 weeks after implantation.With the extension of time,new cartilage gradually formed on the surface of the material.At 12 weeks,most of the defect was covered by new cartilage,and good bone growth was also observed in the subcartilage.In the control group,the deep bone defects were mostly repaired and the superficial cartilage and subchondral bone defects were also repaired to a certain extent,but they were mainly replaced by fibrous tissue and part of fibrocartilage 12 weeks after surgery.(4)In conclusion,hydroxyapatite-polyvinyl alcohol/collagen-chitosan-gelatin composite hydrogel material can mimic the structure and function of natural cartilage,and can effectively repair osteochondral defects in animal experiments.

Objective To analyze the allocation efficiency of medical and health resources in 26 tertiary hospitals in Suzhou from 2017 to 2022 and perform quantitative analysis in order to provide suggestions for relevant departments to rationally coordinate the health resources allocation,regional health planning and hospital management.Methods The number of health technicians,the number of beds in health institutions and the total health expenditure were selected as input indicators,while the number of diagnostic and treatment visits and the number of discharged patients were selected as output indicators.The efficiency was measured by the SBM(Slack-Based Measure)model and the SBM window model respectively.Results Influenced by public health emergencies,the allocation efficiency of medical resources in tertiary hospitals in Suzhou city decreased first and then started to increase Under the two models,the average efficiency scores of 26 hospitals were 0.687 and 0.707,respectively.Notably,under the SBM window model,19 hospitals(73％)achieved efficiency scores near or above the average.Conclusion The two models present a conclusion that the overall efficiency of the tertiary hospitals in Suzhou is generally effective.To further enhance the allo-cation and utilization of medical resources,it is suggested that a comprehensive consideration of health needs guide the planning of medical resource distribution.Leveraging information technology to innovate medical service models,and strengthening internal de-velopment and management practices are essential strategies for promoting high-quality development in tertiary hospitals.

Objective:To explore the early effects and safety of using a hybrid fixation strategy with 3D-printed porous tantalum metal augments to reconstruct substantial bone defects in complex primary total knee arthroplasty (TKA).Methods:A retrospective analysis was performed on the clinical data from August 2019 to September 2023, encompassing 20 patients (21 knees) with significant bone loss who underwent hybrid fixation with 3D-printed porous tantalum augments. The procedures were conducted at two medical centers: the First Affiliated Hospital, School of Medicine, Zhejiang University (11 cases) and Xiangya Hospital of Central South University (9 cases). The study cohort comprised 6 males (6 knees) and 14 females (15 knees), with a mean age of 61.05±11.23 years (range, 42-80 years). The distribution of cases was 7 on the left side and 14 on the right side. All cases were categorized as type 3 according to the Anderson Orthopaedic Research Institute (AORI) classification system. The cohort included 19 unilateral and 1 bilateral case, with 5 involving complex primary replacements (3 with Charcot arthropathy, 1 with syphilitic arthropathy, and 1 with severe valgus deformity) and 16 revision surgeries (13 for aseptic loosening and 3 for infection). Preoperative assessments included routine CT scans and digital three-dimensional reconstructions to identify large metaphyseal defects exceeding 50% of the metaphyseal area or those thicker than 10 mm. For such defects, 3D-printed standardized porous tantalum augments were implemented. In cases of extensive cavitary bone defects or severe metaphyseal defects where the medial and lateral defects collectively exceeded 80% of the metaphyseal region or where the residual bone stock was insufficient for screw fixation of standardized augments, 3D-printed personalized custom-made porous tantalum augments were employed for hybrid fixation and repair. Comparative analyses were conducted on pre- and postoperative imaging data (prosthesis positioning and complications), knee range of motion (ROM), visual analogue scale (VAS) for pain, and Knee Society score (KSS).Results:Of the cases, 17 were repaired using standardized 3D-printed porous tantalum augments, while 4 underwent repairs with customized augments for hybrid fixation. Follow-up averaged 26.5±15.0 months (range, 12-62 months). There was a significant increase in knee ROM, improving from 72.8°±31.9° preoperatively to 113.2°±6.8° at 12 months postoperatively ( P<0.05). VAS scores decreased from 6.6±1.4 preoperatively to 2.5±1.0 at 12 months postoperatively ( P<0.05). Similarly, KSS improved from 52.8±6.4 preoperatively to 80.7±7.9 at 12 months postoperatively ( P<0.05). There were no incidences of prosthesis displacement, poor bone integration, or postoperative infections. Conclusion:The hybrid fixation strategy employing 3D-printed porous tantalum augments has been found to be effective in addressing significant bone defects in TKA. The follow-up results indicate a satisfactory biological integration of the porous tantalum metal augments with the host bone, which has resulted in substantial improvements in pain relief and knee joint functionality.

Objective:To report the application of our self-made Kirschner wire connecting rod combined with a conventional intramedullary nail extractor in difficult extraction of intramedullary devices.Methods:From January 2012 to August 2017, 10 patients with a hard-to-remove intramedullary device were treated at Department of Orthopaedics, The Fifth Hospital Affiliated to Xinjiang Medical University. They were 7 males and 3 females with a mean age of (40.0±9.0) years. In cases where no relevant extractor was available for the intramedullary device or it was impossible to connect the extractor connecting rod to the tail of the intramedullary device, the Kirschner wire was bent and pulled through the screw hole or the hole newly drilled at the tail of the intramedullary device to be tied or fixed with a conventional extractor connecting rod to form an effective connection. Next, our self-made Kirschner wire connecting rod was used to pull out the intramedullary device. In this cohort, 7 intramedullary nails in the tibia, 1 femoral intramedullary nail, 1 humeral intramedullary nail, and 1 tibial elastic nail were removed. The difficult extraction was due to "cold welding" of the tail cap of the intramedullary nail in 3 cases, mismatch between the screw rod of the extractor and the tail screw hole of the intramedullary nail in 4 cases, and unavailability of relevant removal tools in 3 cases. The time for intramedullary device removal, blood loss and postoperative adverse reactions were recorded.Results:Of this cohort, 9 patients underwent simple removal of the intramedullary device and 1 patient replacement of the intramedullary device. The total time for removal of an intramedullary device was (2.3±0.8) h, ranging from 1.0 to 3.2 h. The amount of blood loss was (159.0±61.0) mL, ranging from 80 to 250 mL. The follow-up was (14.5±2.2) months, ranging from 11 to 18 months. There was no infection or fracture associated with implant removal.Conclusion:Application of our self-made Kirschner wire connecting rod in combination with a conventional intramedullary nail extractor is an easy operation to successfully extract hard-to-remove intramedullary implants, requiring no more special instruments.

OBJECTIVE: To investigate the accuracy, safety, and short-term effectiveness of a domestic robot-assisted system in total knee arthroplasty (TKA) by a multicenter randomized controlled trial. METHODS: Between December 2021 and February 2023, 138 patients with knee osteoarthritis who received TKA in 5 clinical centers were prospectively collected, and 134 patients met the inclusion criteria were randomly assigned to either a trial group ( n=68) or a control group ( n=66). Seven patients had lost follow-up and missing data, so they were excluded and the remaining 127 patients were included for analysis, including 66 patients in the trial group and 61 patients in the control group. There was no significant difference ( P>0.05) in gender, age, body mass index, side, duration of osteoarthritis, Kellgren-Lawrence grading, preoperative Knee Society Score (KSS) and Western Ontario and McMaster University Osteoarthritis Index (WOMAC) score between the two groups. The trial group completed the TKA by domestic robot-assisted osteotomy according to the preoperative CT-based surgical planning. The control group was performed by traditional osteotomy plate combined with soft tissue release. Total operation time, osteotomy time of femoral/tibial side, intraoperative blood loss, and postoperative complications were recorded and compared between the two groups. The radiographs were taken at 5 and 90 days after operation, and hip-knee-ankle angle (HKA), lateral distal angle of femur (LDFA), and posterior tibial slope (PTS) were measured. The difference between the measured values of the above indexes at two time points after operation and the preoperative planning target values was calculated, and the absolute value (absolute error) was taken for comparison between the two groups. The postoperative recovery of lower limb alignment was judged and the accuracy was calculated. KSS score and WOMAC score were used to evaluate the knee joint function of patients before operation and at 90 days after operation. The improvement rates of KSS score and WOMAC score were calculated. The function, stability, and convenience of the robot-assisted system were evaluated by the surgeons. RESULTS: The total operation time and femoral osteotomy time of the trial group were significantly longer than those of the control group ( P<0.05). There was no significant difference in the tibial osteotomy time and the amount of intraoperative blood loss between the two groups ( P>0.05). The incisions of both groups healed by first intention after operation, and there was no infection around the prosthesis. Nine patients in the trial group and 8 in the control group developed lower extremity vascular thrombosis, all of which were calf intermuscular venous thrombosis, and there was no significant difference in the incidence of complications ( P>0.05). All patients were followed up 90 days. There was no significant difference in KSS score and WOMAC score between the two groups at 90 days after operation ( P>0.05). There was significant difference in the improvement rate of KSS score between the two groups ( P<0.05), while there was no significant difference in the improvement rate of WOMAC score between the two groups ( P>0.05). Radiological results showed that the absolute errors of HKA and LDFA in the trial group were significantly smaller than those in the control group at 5 and 90 days after operation ( P<0.05), and the recovery accuracy of lower limb alignment was significantly higher than that in control group ( P<0.05). The absolute error of PTS in the trial group was significantly smaller than that in the control group at 5 days after operation ( P<0.05), but there was no significant difference at 90 days between the two groups ( P>0.05). The functional satisfaction rate of the robot-assisted system was 98.5% (65/66), and the satisfaction rates of stability and convenience were 100% (66/66). CONCLUSION Domestic robot-assisted TKA is a safe and effective surgical treatment for knee osteoarthritis, which can achieve favorable lower limb alignment reconstruction, precise implant of prosthesis, and satisfactory functional recovery.
Humans ; Arthroplasty, Replacement, Knee/methods* ; Osteoarthritis, Knee/surgery* ; Blood Loss, Surgical ; Robotics ; Knee Joint/surgery* ; Knee Prosthesis ; Retrospective Studies