To explore the advantages of traditional Chinese medicine （TCM） and integrative TCM-Western medicine approaches in the treatment of diabetic microvascular complications （DMC）， refine key pathophysiological insights and treatment principles， and promote academic innovation and strategic research planning in the prevention and treatment of DMC. The 38th session of the Expert Salon on Diseases Responding Specifically to Traditional Chinese Medicine， hosted by the China Association of Chinese Medicine， was held in Beijing， 2024. Experts in TCM， Western medicine， and interdisciplinary fields convened to conduct a systematic discussion on the pathogenesis， diagnostic and treatment challenges， and mechanism research related to DMC， ultimately forming a consensus on key directions. Four major research recommendations were proposed. The first is addressing clinical bottlenecks in the prevention and control of DMC by optimizing TCM-based evidence evaluation systems. The second is refining TCM core pathogenesis across DMC stages and establishing corresponding "disease-pattern-time" framework. The third is innovating mechanism research strategies to facilitate a shift from holistic regulation to targeted intervention in TCM. The fourth is advancing interdisciplinary collaboration to enhance the role of TCM in new drug development， research prioritization， and guideline formulation. TCM and integrative approaches offer distinct advantages in managing DMC. With a focus on the diseases responding specifically to TCM， strengthening evidence-based support and mechanism interpretation and promoting the integration of clinical care and research innovation will provide strong momentum for the modernization of TCM and the advancement of national health strategies.

Plutonium isotopes(238Pu,239Pu,240Pu and 241Pu)in the environment are important"fingerprint"nuclides in the study of nuclear activity traceability.The content of plutonium isotopes in the environmental metrics is usually very low,and the measurement of these isotopes,especially 238Pu,using mass spectrometry is seriously interfered with by the coexisting 238U.The analysis of several plutonium isotopes in soil usually requires combination of multiple measurement techniques,which leads to a long analysis time and large uncertainty in the isotope ratio.In this work,the hydrous titanium oxide(HTiO)precipitated by the hydrolysis of titanium oxydichloride(TiOCl2)under near-neutral condition was used to preconcentrate plutonium from the soil digestion solution,and the highly efficient decontamination of 238U in the sample was achieved by TK200 resin column chromatography with a decontamination factor of 108.Simulation resuts of density functional theory(DFT)showed that NH3 was considered as a promising reaction gas to eliminate the interference of 238U from 238Pu measurement using mass spectrometry due to the significant discrepancy of the chemical reactivity of U+and Pu+with the reactive gas NH3.Experiments confirmed that by optimizing the flow rates of collision gas(He)and reaction gas(NH3),the interference of 238U could be effectively suppressed,and the decontamination factor of 238U was 104.Combined with chemical separation,the overall decontamination factor of 238U could reach 1012 by using the developed method.By combining chemical separation and tandem quadrupole inductively coupled plasmon-mass spectrometry(ICP-MS/MS)measurement,the simultaneous determination of four ultra-trace plutonium isotopes in soil was realized,and the detection limit of plutonium isotopes was at the femtogram level.Analysis of the international standard reference materials(NIST-SRM-4357 and IAEA-384)showed that the established method could be successfully used for the accurate analysis of ultra-trace four plutonium isotopes(238Pu,239Pu,240Pu and 241Pu)in soil samples.

In the field of substance detection,ion dissociation techniques have become crucial for enhancing qualitative accuracy.By applying external energy to induce dissociation of ions in the substance being analyzed,the internal structural information can be obtained,thereby improving qualitative capabilities.Current research on ion dissociation techniques primarily focuses on tandem mass spectrometry,which typically requires a vacuum environment.However,research on ambient ion dissociation techniques is less developed,with some progress made in the field of tandem ion mobility spectrometry.Recently,the development of field-induced dissociation(FID)in this area has enabled ambient dissociation of various explosive and volatile alcohol ions.Nevertheless,the limitation imposed by the maximum breakdown field of air restricts the energy of the electric field,making it challenging to dissociate ions with high energy requirements,such as those of drugs.To address this issue,in this work,an ambient heat-induced dissociation(HID)technique based on high temperatures was proposed,in which an ambient ion heat-induced dissociation unit was developed and integrated into a home-made ion trap mass spectrometer.Experiments were conducted on four representative drug samples,e.g.methamphetamine,heroin,cocaine,and ketamine.The parent ions mass spectra,low vacuum collision-induced dissociation(CID)mass spectra and ambient HID mass spectra for each sample were obtained.By analyzing and comparing the fragmentation products from ambient and low vacuum dissociation,the feasibility of the ambient HID technique was verified.This technique provided a method for ion dissociation in single mass analyzers without tandem mass spectrometry capability and offered a new research direction for the future development of tandem ion mobility spectrometry.

Immobilized enzyme-based enzyme electrode biosensors, characterized by high sensitivity and efficiency, strong specificity, and compact size, demonstrate broad application prospects in life science research, disease diagnosis and monitoring, etc. Immobilization of enzyme is a critical step in determining the performance (stability, sensitivity, and reproducibility) of the biosensors. Random immobilization (physical adsorption, covalent cross-linking, etc.) can easily bring about problems, such as decreased enzyme activity and relatively unstable immobilization. Whereas, directional immobilization utilizing amino acid residue mutation, affinity peptide fusion, or nucleotide-specific binding to restrict the orientation of the enzymes provides new possibilities to solve the problems caused by random immobilization. In this paper, the principles, advantages and disadvantages and the application progress of enzyme electrode biosensors of different directional immobilization strategies for enzyme molecular sensing elements by specific amino acids (lysine, histidine, cysteine, unnatural amino acid) with functional groups introduced based on site-specific mutation, affinity peptides (gold binding peptides, carbon binding peptides, carbohydrate binding domains) fused through genetic engineering, and specific binding between nucleotides and target enzymes (proteins) were reviewed, and the application fields, advantages and limitations of various immobilized enzyme interface characterization techniques were discussed, hoping to provide theoretical and technical guidance for the creation of high-performance enzyme sensing elements and the manufacture of enzyme electrode sensors.

Background Asthma poses a serious threat to children's growth, development, and mental health, thus there has been an increasing focus on the control of asthma morbidity in children and the assessment of its risk factors. A growing body of research has found that exposure to ambient air pollutants an significatly increase the risk of childhood asthma. Objective To understand the changes of ambient air pollutant concentrations in Nanjing and asthma outpatient visits to Nanjing Children's Hospital, and to quantitatively analyze the effects of exposure to different ambient air pollutants on children's asthma outpatient visits. Methods Daily data of ambient air pollutants fine particulate matter (PM_2.5), inhalable particle (PM₁₀), sulfur dioxide (SO₂), nitrogen dioxide (NO₂), carbon monoxide (CO), ozone (O₃), meteorological factors (air temperature & relative humidity), and outpatient visits due to asthma in the hospital from January 1, 2019 to December 31, 2023 were collected, and a generalized additive model based on quasi poisson distributions was used to quantitatively analyze the short-term effects of ambient air pollutant exposure on outpatient visits due to asthma in the hospital. Results The annual average concentrations of PM_2.5, PM₁₀, SO₂, and NO₂ in Nanjing from 2019 to 2023 did not exceed the national limits. For single-day lagged effects, the single-pollutant model showed that the effects of PM_2.5, PM₁₀, NO₂, and CO on children's asthma outpatient visits were greatest for every 10 units increase at lag0, with excess risk (ER) of 1.39% (95%CI: 0.65%, 2.14%), 1.46% (95%CI: 0.97%, 1.95%), 5.46% (95%CI: 4.36%, 6.57%), and 0.18% (95%CI: 0.11%, 0.26%), respectively, and SO₂ reached the maximum effect at lag1, with an ER of 23.15% (95%CI: 13.57%, 33.53%) for each 10 units increase in concentration. Different pollutants reached their maximum cumulative lag effects at different time. The PM₁₀, PM_2.5, SO₂, NO₂, and CO showed the largest cumulative lag effects at lag01, lag01, lag02, lag02, and lag03, respectively, with ERs of 1.35% (95%CI: 0.77%, 1.92%), 0.96% (95%CI: 0.10%, 1.83%), 28.50% (95%CI: 15.49%, 42.98%), 6.92% (95%CI: 5.53%, 8.33%), and 0.31% (95%CI: 0.20%, 0.42%), respectively. The influences of PM_2.5 and PM₁₀ on outpatient visits due to asthma in the hospital became more pronounced with advancing age, while the associations with NO₂, SO₂, and CO were weakened as children grew older. Conclusion Ambient air pollutants (PM_2.5, PM₁₀, SO₂, NO₂, CO) can increase childhood asthma visits, and different pollutants have varied effects on the number of asthmatic children's visits at different ages.

Objective: Machine learning (ML) has been reported to have better predictive capability than traditional statistical techniques. The aim of this study was to assess the efficacy of ML algorithms and logistic regression (LR) for predicting depressive symptoms during the COVID-19 pandemic. Methods: Analyses were carried out in a national cross-sectional study involving 21,916 participants. The ML algorithms in this study included random forest (RF), support vector machine (SVM), neural network (NN), and gradient boosting machine (GBM) methods. The performance indices were sensitivity, specificity, accuracy, precision, F1-score, and area under the receiver operating characteristic curve (AUC). Results: LR and NN had the best performance in terms of AUCs. The risk of overfitting was found to be negligible for most ML models except for RF, and GBM obtained the highest sensitivity, specificity, accuracy, precision, and F1-score. Therefore, LR, NN, and GBM models ranked among the best models. Conclusion Compared with ML models, LR model performed comparably to ML models in predicting depressive symptoms and identifying potential risk factors while also exhibiting a lower risk of overfitting.

Objective: Machine learning (ML) has been reported to have better predictive capability than traditional statistical techniques. The aim of this study was to assess the efficacy of ML algorithms and logistic regression (LR) for predicting depressive symptoms during the COVID-19 pandemic. Methods: Analyses were carried out in a national cross-sectional study involving 21,916 participants. The ML algorithms in this study included random forest (RF), support vector machine (SVM), neural network (NN), and gradient boosting machine (GBM) methods. The performance indices were sensitivity, specificity, accuracy, precision, F1-score, and area under the receiver operating characteristic curve (AUC). Results: LR and NN had the best performance in terms of AUCs. The risk of overfitting was found to be negligible for most ML models except for RF, and GBM obtained the highest sensitivity, specificity, accuracy, precision, and F1-score. Therefore, LR, NN, and GBM models ranked among the best models. Conclusion Compared with ML models, LR model performed comparably to ML models in predicting depressive symptoms and identifying potential risk factors while also exhibiting a lower risk of overfitting.

Objective: Machine learning (ML) has been reported to have better predictive capability than traditional statistical techniques. The aim of this study was to assess the efficacy of ML algorithms and logistic regression (LR) for predicting depressive symptoms during the COVID-19 pandemic. Methods: Analyses were carried out in a national cross-sectional study involving 21,916 participants. The ML algorithms in this study included random forest (RF), support vector machine (SVM), neural network (NN), and gradient boosting machine (GBM) methods. The performance indices were sensitivity, specificity, accuracy, precision, F1-score, and area under the receiver operating characteristic curve (AUC). Results: LR and NN had the best performance in terms of AUCs. The risk of overfitting was found to be negligible for most ML models except for RF, and GBM obtained the highest sensitivity, specificity, accuracy, precision, and F1-score. Therefore, LR, NN, and GBM models ranked among the best models. Conclusion Compared with ML models, LR model performed comparably to ML models in predicting depressive symptoms and identifying potential risk factors while also exhibiting a lower risk of overfitting.

Objective: Machine learning (ML) has been reported to have better predictive capability than traditional statistical techniques. The aim of this study was to assess the efficacy of ML algorithms and logistic regression (LR) for predicting depressive symptoms during the COVID-19 pandemic. Methods: Analyses were carried out in a national cross-sectional study involving 21,916 participants. The ML algorithms in this study included random forest (RF), support vector machine (SVM), neural network (NN), and gradient boosting machine (GBM) methods. The performance indices were sensitivity, specificity, accuracy, precision, F1-score, and area under the receiver operating characteristic curve (AUC). Results: LR and NN had the best performance in terms of AUCs. The risk of overfitting was found to be negligible for most ML models except for RF, and GBM obtained the highest sensitivity, specificity, accuracy, precision, and F1-score. Therefore, LR, NN, and GBM models ranked among the best models. Conclusion Compared with ML models, LR model performed comparably to ML models in predicting depressive symptoms and identifying potential risk factors while also exhibiting a lower risk of overfitting.

Objective: Machine learning (ML) has been reported to have better predictive capability than traditional statistical techniques. The aim of this study was to assess the efficacy of ML algorithms and logistic regression (LR) for predicting depressive symptoms during the COVID-19 pandemic. Methods: Analyses were carried out in a national cross-sectional study involving 21,916 participants. The ML algorithms in this study included random forest (RF), support vector machine (SVM), neural network (NN), and gradient boosting machine (GBM) methods. The performance indices were sensitivity, specificity, accuracy, precision, F1-score, and area under the receiver operating characteristic curve (AUC). Results: LR and NN had the best performance in terms of AUCs. The risk of overfitting was found to be negligible for most ML models except for RF, and GBM obtained the highest sensitivity, specificity, accuracy, precision, and F1-score. Therefore, LR, NN, and GBM models ranked among the best models. Conclusion Compared with ML models, LR model performed comparably to ML models in predicting depressive symptoms and identifying potential risk factors while also exhibiting a lower risk of overfitting.