OBJECTIVE To investigate the mechanism of pachymic acid on renal injury in pregnancy induced hypertension （PIH） rats by regulating the silent information regulator transcript 1/peroxisome proliferator-activated receptor γ coactivator-1α （Sirt1/PGC-1α） pathway. METHODS Pregnant SD rats were prepared by co-caging and PIH model was induced using N-nitro-L- arginine methyl ester （L-NAME） method. PIH rats were randomly divided into model group， L-pachymic acid （low-dose pachymic acid， 10 mg/kg） group， H-pachymic acid （high-dose pachymic acid， 20 mg/kg） group， and H-pachymic acid+EX527 （20 mg/kg pachymic acid+10 mg/kg EX527） group， with 6 rats in each group. Another 6 normal pregnant rats were selected as blank group. Each group was given relevant medicine or solvent intragastrically or intraperitoneally daily， once a day， for 28 consecutive days. After the last administration， 24 h urinary protein and tail artery systolic blood pressure （SBP） were measured in pregnant rats from each group， along with the levels of serum creatinine （Scr）， blood urea nitrogen （BUN），uric acid （UA）， and cystatin C （Cys-C）. The contents of superoxide dismutase （SOD）， malondialdehyde （MDA）， glutathione peroxidase （GSH-Px）， and 8-hydroxy-2′-deoxyguanosine （8-OHdG） in renal tissue， as well as the mRNA and protein expression levels of Sirt1 and PGC-1α， were also determined. Meanwhile， renal histopathological changes in rats from each group were evaluated using hematoxylin-eosin （HE） staining and periodic acid-Schiff （PAS） staining. RESULTS Compared with model group， L-pachymic acid group and H-pachymic acid group exhibited significant decreases in 24 h urine protein quantification， tail artery SBP， Scr， BUN， UA， Cys-C levels， glomerulosclerosis index score of renal tissue， renal tubular injury score， the percentage of PAS positive area， MDA and 8-OHdG （P＜0.05）. Conversely， the contents of SOD and GSH-Px， along with the mRNA and protein expression levels of Sirt1 and PGC-1α， were significantly increased （P＜0.05）. Moreover， these improvements were more pronounced in H-pachymic acid group （P＜0.05）. Compared with H-pachymic acid group， the aforementioned indicators in pregnant rats from the H-pachymic acid+EX527 group showed significant reversal （P＜0.05）. CONCLUSIONS Pachymic acid significantly ameliorates renal injury induced by PIH in rats， potentially through activation of the Sirt1/PGC-1α pathway.

ObjectiveHepatocellular carcinoma (HCC) represents 90% of all primary liver cancers. The main risk factors associated with HCC include viral hepatitis (B and/or C), alcohol abuse, and metabolic dysfunction-associated steatotic liver disease (MASLD), which progressively advance to liver fibrosis, cirrhosis, and ultimately evolve into HCC. Surgical resection represents the most effective treatment for HCC, while recent advances in immunotherapy, including immune checkpoint inhibitors and adoptive cell therapies, have provided improved treatment prospects for patients with unresectable HCC. However, the complex metabolic heterogeneity of HCC limits the therapeutic efficacy. Metabolic intermediates acyl-CoA not only provide energy and substrates for numerous biochemical reactions but also serve as donors for protein lysine acylation, a major class of post-translational modification (PTM). Therefore, a deeper understanding of the molecular mechanisms underlying protein lysine acylation and hepatocarcinogenesis is urgently needed. MethodsThe levels of protein lysine acylation and silence information regulator 5 (SIRT5) expression levels in clinical HCC samples were analyzed by Western blot. Quantitative malonylome and succinylome of HCC samples were analyzed by antibody-based affinity enrichment coupled with tandem mass spectrometry. The proliferation of HCC cells was analyzed with Cell Counting Kit-8 (CCK-8) assays, the apoptosis was quantified by Annexin V-FITC/propidium iodide (PI) staining coupled with flow cytometry, and the ability of cells to migrate was assayed by Transwell assays. The enzymatic activity of glutathione S-transferase Mu 1 (GSTM1) was quantified. Transgenic mice with hepatic overexpression of SIRT5 were constructed using CRISPR-Cas9, and primary hepatocarcinogenesis was induced by administration of diethylnitrosamine. ResultsWestern blot analysis indicated that the expression level of SIRT5 was elevated in clinical samples from HCC patients, and the levels of lysine malonylation, glutarylation, and succinylation were significantly reduced in HCC tissues. Knockout of SIRT5 in MHCC-97H and MHCC-97L hepatoma cells suppressed cell proliferation, and increased the percentage of apoptotic cells significantly. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analyses of the differentially malonylome and succinylome of HCC samples revealed significant enrichment in two major classes of biological processes: core energy metabolism (e.g., glycolysis/gluconeogenesis, tricarboxylic acid metabolic process, fatty acid beta oxidation) and detoxification and oxidative stress response (e.g., response to toxic substance, chemical carcinogenesis, reactive oxygen species (ROS)). SIRT5 removes malonylation from lysine residues in GSTM1 and restores its detoxification activity, which is crucial for the survival of hepatocytes under stressed conditions. More importantly, in vivo experiment indicated that hepatic-specific overexpression of SIRT5 in mice accelerated diethylnitrosamine-induced liver fibrosis and hepatocarcinogenesis, indicating the critical role of SIRT5 in HCC progression. ConclusionThis study highlights the previously unrecognized SIRT5-GSTM1 axis as a key regulator in hepatocarcinogenesis, and suggests a potential target for the treatment of patients with HCC.

Objective To analyze the application effects of artificial intelligence (AI) software and Mimics software in preoperative three-dimensional (3D) reconstruction for thoracoscopic anatomical pulmonary segmentectomy. Methods A retrospective analysis was conducted on patients who underwent thoracoscopic pulmonary segmentectomy at the Second People's Hospital of Huai'an from October 2019 to March 2024. Patients who underwent AI 3D reconstruction were included in the AI group, those who underwent Mimics 3D reconstruction were included in the Mimics group, and those who did not undergo 3D reconstruction were included in the control group. Perioperative related indicators of each group were compared. Results A total of 168 patients were included, including 73 males and 95 females, aged 25-81 (61.61±10.55) years. There were 79 patients in the AI group, 53 patients in the Mimics group, and 36 patients in the control group. There were no statistical differences in gender, age, smoking history, nodule size, number of lymph node dissection groups, postoperative pathological results, or postoperative complications among the three groups (P>0.05). There were statistical differences in operation time (P<0.001), extubation time (P<0.001), drainage volume (P<0.001), bleeding volume (P<0.001), and postoperative hospital stay (P=0.001) among the three groups. There were no statistical differences in operation time, extubation time, bleeding volume, or postoperative hospital stay between the AI group and the Mimics group (P>0.05). There was no statistical difference in drainage volume between the AI group and the control group (P=0.494), while there were statistical differences in operation time, drainage tube retention time, bleeding volume, and postoperative hospital stay (P<0.05). Conclusion For patients requiring thoracoscopic anatomical pulmonary segmentectomy, preoperative 3D reconstruction and preoperative planning based on 3D images can shorten the operation time, postoperative extubation time and hospital stay, and reduce intraoperative bleeding and postoperative drainage volume compared with reading CT images only. The use of AI software for 3D reconstruction is not inferior to Mimics manual 3D reconstruction in terms of surgical guidance and postoperative recovery, which can reduce the workload of clinicians and is worth promoting.

Objective To analyze the medication rules of traditional Chinese medicine in treating breast cancer based on real-world data mining.Methods Inpatients with breast cancer who received traditional Chinese medicine treatment at the Affiliated Hospital of Chengdu University of Traditional Chinese Medicine from January 2017 to December 2021 were selected.Python 3.10 software was used to mine traditional Chinese medicine prescription data;SPSS 23.0 software was applied for descriptive analysis,and systematic cluster analysis was performed on high-frequency drugs.Results A total of 3026 consultation records of inpatients with breast cancer were collected.The main traditional Chinese medicine syndrome diagnosis of"predominantly liver depression and Qi stagnation"accounted for 60.94％of the total consultations.A total of 240 kinds of traditional Chinese medicine were used,with a cumulative frequency of 35 462 times.Among them,29 kinds of traditional Chinese medicine such as Danggui,Fuling,Baizhu,Chaihu had a cumulative usage frequency exceeding 300 times.Regarding the four natures of drugs,cold-natured(43.55％),warm-natured(30.05％),and neutral-natured(23.34％)drugs were predominant;In terms of five flavors,sweet(46.12％),bitter(30.91％),and pungent(20.02％)were the main ones.The most frequently used drugs were tonifying herbs(32.77％),followed by heat-clearing herbs(15.96％)and phlegm-resolving herbs(14.71％).Systematic cluster analysis yielded 7 groups of drug combinations.Conclusion In real-world clinical practice,traditional Chinese medicine for breast cancer mainly uses tonifying herbs,reflecting the traditional Chinese medicine principle of"strengthening healthy Qi and cultivating the root"in treating tumors.The four natures and five flavors of drugs follow syndrome differentiation and the combination of cold and heat.The clustered drug combinations have extensive therapeutic effects,covering various syndromes of breast cancer at different stages,which can provide a reference for clinical medication.

This consensus was developed by the Orthodontic Society of the Chinese Stomatological Association to provide a systematic, scientific, and practical guideline for informed consent in orthodontic care. Orthodontic treatment is typically lengthy, highly individualized, and involves multiple factors such as growth and development, occlusal function, and facial esthetics. Rapid technological advances and diverse risk profiles make the traditional reliance on orthodontist experience or institutional templates insufficient to ensure patients′ full understanding and autonomous decision-making. To address this, the expert panel conducted extensive reviews of domestic and international guidelines, analyzed representative dispute cases, and performed multicenter patient-clinician surveys. Using a multi-round Delphi method, the group established a standardized informed consent framework covering the initial consultation, treatment, and retention phases. The consensus emphasizes that informed consent is not only a fundamental legal and ethical requirement but also a key step in building trust, improving patient compliance, and enhancing treatment satisfaction. Orthodontists should clearly and comprehensively explain treatment plans, potential risks, uncertainties, and associated costs, while respecting the autonomy of patients or guardians, and maintain continuous communication and dynamic evaluation throughout the treatment process. The release of this consensus provides unified and authoritative guidance for clinical orthodontics, helping to standardize informed consent, enhance its transparency, safeguard patient rights, reduce medical risks, and promote high-quality, sustainable development of orthodontic practice.

Objective:To observe the early clinical efficacy of 3D-printed modular supporting prosthesis for reconstruction of lacunar bone defect caused by giant cell tumor of the distal femur.Methods:From May 2018 to July 2023, a total of 9 patients with giant cell tumor of the distal femur were treated with 3D-printed modular supporting prosthesis to reconstruct lacunar bone defects in the Department of Orthopedics, West China Hospital, Sichuan University. There were 4 males and 5 females, aged 30.8±6.1 years (range, 24-44 years), 5 cases on the left side, 4 cases on the right side, 2 cases of Campanacci grade I, 7 cases of Campanacci grade II. The anteroposterior and lateral X-ray films and T-SMART tomosynthesis imaging of the knee joint were taken to observe the bone graft healing and osseointegration after operation. Musculoskeletal Tumor Society (MSTS)-93 was used to evaluate knee function, and visual analogue scale (VAS) was used to evaluate knee pain.Results:All patients were successfully operated and followed up for an average of 30.8±7.5 months (range, 18-42 months). The operation time was 124.2±23.6 min, and the intraoperative blood loss was 105.6±17.4 ml. All autografts showed bony union at the graft-host junction, and the healing time was 3.3±0.4 months (range, 3.0-4.0 months). At 6 months after surgery, T-SMART tomosynthesis imaging showed that the gap between the prosthesis-bone interface was less than 1 mm in all patients. At the last follow-up, the thickness of residual subchondral bone was 5.7±1.3 mm, which was greater than that before operation 2.2±0.8 mm, and the difference was statistically significant ( t=10.823, P<0.001). At the last follow-up, the score of MSTS-93 was 26.7±2.4, which was higher than that before operation 18.8±3.7, and the difference was statistically significant ( t=5.367, P<0.001). At the last follow-up, the range of motion of the knee joint was 122.8°±9.1°, which was higher than that before operation 108.3°±6.1°, and the difference was statistically significant ( t=3.970, P<0.001). All patients were able to walk normally, go up and down stairs and other daily activities, and 7 patients were able to complete squats. At the last follow-up, there was no local tumor recurrence, distant metastasis, death, joint infection, pain (VAS score was 0), delayed wound healing, joint degeneration, prosthesis loosening or articular surface collapse. Conclusion:Reconstruction of lacunar bone defect caused by giant cell tumor of distal femur with 3D-printed modular supporting prosthesis can effectively improve knee joint function and osseointegration, and the short-term clinical results are satisfactory.

Objective:To explore the early and mid-term efficacy of three-dimensional printed customized porous prosthesis with preserved articular in the reconstruction of ultra-long segmental bone defect around the metaphysis of peri-knee.Methods:A retrospective analysis was conducted on the data of 24 patients who underwent reconstruction of ultra-long segmental bone defect around the metaphysis of peri-knee using 3D-printed customized porous prostheses at West China Hospital of Sichuan University from June 2015 to June 2021. There were 14 female cases and 10 male cases, with an average age of 28.9±16.5 years (range, 12-61 years), 12 cases at the distal end of the femur and 12 cases at the proximal end of the tibia. Tumor types: 16 cases of osteosarcoma, 4 cases of Ewing's sarcoma, 2 cases of chondrosarcoma, and 2 case of parosteal osteosarcoma. All patients were classified as Enneking stage IIB. Record the oncology results of the patients, the length of tumor segment resection, and the remaining bone length at the distal femur or proximal tibia, as well as complications, systemic metastasis and imaging changes. The bone integration at the prosthesis-bone interface was evaluated by tomosynthesis-shimadzu metal artifact reduction technology (T-SMART). Limb function was evaluated using the Musculoskeletal Tumor Society (MSTS)-93 score and knee range of motion assessment.Results:All 24 patients successfully completed the surgery and were followed up, with an average follow-up time of 51.8±12.7 months (range, 32-99 months). The length of femoral osteotomy was 241.1±66.2 mm (range, 150.6-333.4 mm), and the length of tibial osteotomy was 198.6±35.6 mm (range, 156.6-287.6 mm). The remaining bone length at the epiphyseal end around the knee joint (from the knee joint plane to the osteotomy plane of the distal femur or proximal tibia) was 52.6±11.0 mm (range, 31.1-77.5 mm). At the last follow-up, 23 patients survived tumor-free, while one patient died due to lung metastasis 54 months after the operation. One patient had prosthesis fracture 75 months after the operation, two patients had aseptic loosening 6 and 8 months after the operation, and the T-SMART of the remaining 20 patients showed that the implanted prostheses all achieved good osseointegration. At the last follow-up, the range of motion of the knee joint was 126.2°±7.5° (range, 110.0°-140.0°), and the MSTS-93 score was 26.7±1.8 points (range, 23-30 points). Among them, the MSTS-93 score of the femoral prosthesis was 26.7±1.6 points (range, 24-29 points), and the MSTS-93 score of the tibial prosthesis was 26.9±1.9 points (range, 23-30 points). The average knee range of motion was 126.2°±7.5° (range, 110°-140°), and the MSTS-93 functional score was 26.7±1.8 points (range, 23-30 points) at the last follow-up. The femoral component had an average score of 26.7±1.6 points (range, 24-29 points), while the tibial component had an average score of 26.9±1.9 points (range, 23-30 points).Conclusion:The application three-dimensional printed customized porous prosthesis with preserved articular in the reconstruction of ultra-long segmental bone defect around the metaphysis of peri-knee can preserve the joint, restore limb function well, and have a low incidence of prosthesis complications, with good clinical efficacy in the early and middle stages.

Objective To investigate the efficacy of Xuanbi Decoction as an adjuvant therapy for rheumatoid arthritis(RA)with dampness-heat obstruction syndrome,and its impacts on the interleu-kin-23(IL-23)/helper T cell 17(Th 17)inflammatory axis,as well as the levels of matrix metallo-proteinase-3(MMP-3)and tissue inhibitor of metalloproteinase-1(TIMP-1).Methods A total of 95 RA patients with dampness-heat obstruction syndrome were selected as the study subjects,and randomly divided into control group(48 cases)and observation group(47 cases).The control group received western medicine treatment,while the observation group received Xuanbi Decoction treat-ment based on the control group.The clinical efficacy,traditional Chinese medicine(TCM)syn-drome scores,imaging assessment results,disease activity,indicators of the IL-23/Th17 inflammatory axis,MMP-3,TIMP-1 and adverse reactions were compared between the two groups.Results The total effective rate in the observation group was 95.74％,which was significantly higher than 81.25％in the control group(P＜0.05).After treatment,the TCM syndrome scores(joint pain,joint swell-ing,yellow and greasy tongue coating as well as slippery and rapid pulse)in the observation group were significantly lower than those in the control group(P＜0.05).After treatment,the DAS28 and Sharp scores in the observation group were significantly lower than those in the control group(P＜0.05).After treatment,the levels of IL-23,Th17,IL-17 and MMP-3 in the observation group were significantly lower than those in the control group,while the TIMP-1 level was significantly higher(P＜0.05).There was no statistically significant difference in the incidence of adverse reactions between the two groups(P＞0.05).Conclusion Xuanbi Decoction as an adjuvant therapy for RA patients with dampness-heat obstruction syndrome demonstrates significant efficacy and high safety.

High partial pressure oxygen is widely used in the treatment of ischemic and hypoxic diseases and in diving.However,chronic inhalation of gas with high oxygen partial pressure can have a toxic effect on the body,that is,oxygen toxicity.The lung is one of the target organs where injury is the most pronounced and direct after exposure to high partial pressure oxygen.This article reviews the research progress in pathogenesis and diagnosis of pulmonary oxygen toxicity in the hope of providing a reference for related prevention and treatment.

This study was aimed at preliminarily investigating the genetic and antimicrobial resistance characteristics of Salmonella Alachua isolates through whole-genome analyses.Five Salmonella Alachua isolates from various sources(both hu-man and non-human)were collected and identified.Phenotype and serotype verification,antimicrobial susceptibility testing,and whole-genome sequencing were performed.Virulence genes,antimicrobial resistance genes,and plasmid replicons were predicted according to globally available Salmonella Alachua genomic data.A phylogenetic tree was constructed to explore the genetic background.The first report of Salmonella Alachua in China emerged in Shanghai in 2015,and patients presented pri-marily with diarrhea.The isolates have been found predominantly in the eastern and southern coastal regions.Among the five i-solates analyzed,four belonged to sequence type(ST)2061,and one belonged to ST1298.All isolates were susceptible to most commonly used clinical antibiotics.Whole-genome analyses revealed that two ST2061 strains carried the blaKPC-2 gene,and one ST1298 strain carried the fosA7 gene.Phylogenetic analysis of global Salmonella Alachua populations indicated that the ST2061 clone belonged to the C1 clade,which was closely related to strains from the UK,whereas the ST1298 clone was found in the C4 clade,a globally disseminated fosA 7-positive lineage.This study provides initial insights into the genetic and antimi-crobial resistance characteristics of Salmonella Alachua in China,highlighting the presence of strains carrying blaKPC-2 and fo-sA7 genes.These findings may provide a reference for future large-scale molecular epidemiological surveillance and source-trac-ing efforts,and they underscore the importance of enhanced resistance monitoring for Salmonella Alachua.