Objective To quantitatively assess the association of short-term exposure to polycyclic aromatic hydrocarbons (PAHs) in ambient fine particulate matter (PM2.5) with residents mortality. Methods A time-stratified case-crossover study was conducted from 2020 to 2022 among 10606 non-accidental residents by using the Guangzhou Cause of Death Surveillance System in Conghua District, Guangzhou. Exposure levels of PAHs in PM_2.5 and meteorological data during the study period were obtained from the Center for Disease Control and Prevention in Conghua District and the China Meteorological Administration Land Data Assimilation System (CLDAS-V2.0), respectively. Conditional Poisson regression model was used to estimate the exposure-response association between PAHs and the mortality risk. Results Fluoranthene, chrysene, benzo[k]fluoranthene, benzo[a]pyrene, and indeno[1,2,3-cd]pyrene were significantly associated with an increased risk of mortality. For every one interquartile range increase in exposure levels, the non-accidental mortality risks increased by 8.33% (95% CI: 1.80%, 15.27%), 4.67% (95% CI: 1.86%, 7.57%), 6.07% (95% CI: 2.08%, 10.21%), 4.62% (95% CI: 1.85%, 7.47%), and 4.70% (95% CI: 0.53%, 9.03%), respectively. The estimated non accidental deaths attributable to exposure to fluoranthene, chrysene, benzo[k]fluorine, benzo[a]pyrene and indine[1,2,3-cd]pyrene were 5.91%, 6.08%, 6.51%, 6.46%, and 4.21%, respectively. Conclusions Short-term exposure to PAHs in PM_2.5, including fluoranthene, chrysene, benzo[k]fluoranthene, benzo[a]pyrene and indine[1,2,3-cd]pyrene, was significantly associated with an increased risk of mortality among residents.

Objective: To investigate the association between the physical fitness index (PFI) and symptoms of depressive, anxiety and stress symptoms among college students, providing a reference for mental health interventions. Methods: From June to September 2025, combined convenience and cluster random sampling approach was used to administer questionnaire surveys and perform physical fitness tests on 2 712 college students from Zhejiang Chinese Medical University. The Depression Anxiety Stress Scales-21 Items (DASS-21) was used to assess mental health status. Chi square test and multivariate Logistic regression analysis were used to determine the associations between the PFI and the PFI component indicators with depressive, anxiety and stress symptoms. Results: The prevalence of depressive, anxiety and stress among college students were 24.26%, 33.22% and 13.68%, respectively. Statistically significant differences in the prevalence of these symptoms were detected across groups differing in sleep quality, physical activity, weekly breakfast frequency, and history of low back or neck pain ( χ 2=9.33-151.83, all P <0.05). After adjusting for confounding factors, Logistic regression revealed that the moderate and high PFI groups had significantly reduced risks of depressive and anxiety compared to the low PFI group ( OR =0.73, 0.63; 0.61, 0.72, all P <0.05). Poor speed (50 m run) and lower body strength (standing long jump) emerged as common risk factors affecting anxiety and depressive symptoms in both male and female college students (all P <0.05). Increased muscle strength (sit up for 1 min) in female students reduced the risk of depressive ( OR =0.81), anxiety ( OR =0.85), and stress symptoms ( OR =0.79) (all P <0.05). Enhanced lung capacity in male students decreased the risk of depressive ( OR =0.84) and anxiety symptoms ( OR =0.85) (both P <0.05). Conclusions The PFI is negatively correlated with depressive and anxiety symptoms among college students with notable gender differences. Insufficient speed and lower body explosive power represent common risk factors for mental health among male and female college students.

OBJECTIVE: To evaluate the feasibility and short-term effectiveness of three-dimensional (3D)-printed customized porous acetabular components for reconstruction of extensive acetabular bone defects during primary total hip arthroplasty (THA). METHODS: The clinical data of 8 patients with extensive acetabular bone defects, who were treated with 3D-printed individualized porous acetabular components between July 2018 and January 2022, were retrospectively analyzed. The cohort comprised 4 males and 4 females with an average age of 48 years ranging from 34 to 56 years. Acetabular bone defects were classified as Paprosky type ⅢA in 3 cases and type ⅢB in 5 cases. The causes of acetabular destruction were hip tuberculosis (5 cases), pigmented villonodular synovitis (2 cases), and syphilitic arthritis (1 case). Visual analogue scale (VAS) score and Harris hip score (HHS) were used to evaluate the pain relief and hip function before and after operation. Reconstruction outcomes were further assessed by imaging results [X-ray film and Tomosynthesis Shimadzumetal artefact reduction technology (T-SMART)], and the mechanical properties were evaluated by finite element analysis. RESULTS: The operation time ranged from 174 to 195 minutes (mean, 187 minutes), and intraoperative blood loss ranged from 390 to 530 mL (mean, 465 mL). All 8 patients were follow-up 26-74 months (mean, 44 months). Among the 5 patients with tuberculosis, none experienced postoperative recurrence. At last follow-up, the VAS score was 0.3±0.5 and the HHS score was 87.9±3.7, both significantly improved compared to preoperative values ( t=25.170, P<0.001; t=-28.322, P<0.001). X-ray films at 2 years after operation demonstrated satisfactory matching between the 3D-printed customized acetabular component and the acetabulum. The postoperative center of rotation of the operated hip was shifted by (2.1±0.5) mm horizontally and (2.0±0.7) mm vertically relative to the contralateral side, with both offsets showing significant differences compared to preoperative values ( t=24.700, P<0.001; t=55.230, P<0.001). T-SMART imaging showed satisfactory osseointegration at the implant-host bone interface. No complications such as aseptic loosening or screw breakage was observed during follow-up. Finite element analysis showed that the acetabular component had good mechanical properties. CONCLUSION The application of 3D-printed individualized porous acetabular components in the reconstruction of extensive acetabular bone defects demonstrated precise anatomical reconstruction, stable mechanical support, and good functional performance in short-term follow-up, offering a potential alternative for acetabular defect reconstruction in primary THA.
Humans ; Middle Aged ; Male ; Female ; Printing, Three-Dimensional ; Arthroplasty, Replacement, Hip/instrumentation* ; Acetabulum/diagnostic imaging* ; Adult ; Follow-Up Studies ; Retrospective Studies ; Hip Prosthesis ; Prosthesis Design ; Porosity ; Treatment Outcome ; Plastic Surgery Procedures/methods*

Extensive studies have identified potential adverse effects on semen quality of obesity, based on body mass index, but the association between body fat distribution, a more relevant indicator for obesity, and semen quality remains less clear. We conducted a longitudinal study of 4304 sperm donors from the Guangdong Provincial Human Sperm Bank (Guangzhou, China) during 2017-2021. A body composition analyzer was used to measure total and local body fat percentage for each participant. Generalized estimating equations were employed to assess the association between body fat percentage and sperm count, motility, and morphology. We estimated that each 10% increase in total body fat percentage (estimated change [95% confidence interval, 95% CI]) was significantly associated with a 0.18 × 10 6 (0.09 × 10 6 -0.27 × 10 6 ) ml and 12.21 × 10 6 (4.52 × 10 6 -19.91 × 10 6 ) reduction in semen volume and total sperm count, respectively. Categorical analyses and exposure-response curves showed that the association of body fat distribution with semen volume and total sperm count was stronger at higher body fat percentages. In addition, the association still held among normal weight and overweight participants. We observed similar associations for upper limb, trunk, and lower limb body fact distributions. In conclusion, we found that a higher body fat distribution was significantly associated with lower semen quality (especially semen volume) even in men with a normal weight. These findings provide useful clues in exploring body fat as a risk factor for semen quality decline and add to evidence for improving semen quality for those who are expected to conceive.
Humans ; Male ; Adult ; Semen Analysis ; China ; Body Fat Distribution ; Longitudinal Studies ; Sperm Count ; Sperm Motility ; Body Mass Index ; Tissue Donors ; Obesity/complications* ; Spermatozoa ; Young Adult ; Middle Aged ; East Asian People

This consensus will introduce the characteristics of fillers used in the surgical cavities of domestic nasal surgery patients based on relevant literature and expert opinions. It will also provide recommendations for the selection of cavity fillers for different nasal diseases, with chronic sinusitis as a representative example.
Humans ; Nasal Cavity/surgery* ; Nasal Surgical Procedures ; China ; Consensus ; Sinusitis/surgery* ; Dermal Fillers

OBJECTIVES: To explore the mechanism by which astragaloside IV (AS-IV) alleviates D-galactose (D-GAL)-induced senescence in human umbilical vein endothelial cells (HUVECs). METHODS: Cultured HUVECs were treated with D-GAL (40 g/L), AS-IV (200 μmol/L), D-GAL+AS-IV, or D-GAL+AS-IV+MTK458 (a mitochondrial autophagy agonist, 25 μmol/L) for 48 h, and the changes in cell proliferation, migration, and angiogenesis capacity were evaluated. Cell apoptosis, reactive oxygen species (ROS) levels, mitochondrial membrane potential, and expressions of autophagy-related proteins (LC3-II/LC3-I) and PINK1/Parkin pathway proteins in the treated cells were detected. RESULTS: AS-IV treatment significantly reduced the inhibitory effect of D-GAL on HUVEC viability, effectively alleviated D-GAL-induced impairment of tube-forming ability, and promoted angiogenesis and migration ability of the cells. AS-IV also significantly reduced the rate of D-GAL-induced HUVECs positive for senescence-associated β-galactosidase (SA-β-Gal) staining and inhibited the expression of senescence-related genes P21 and P53. AS-IV restored mitochondrial membrane potential and reduced intracellular ROS levels in D-GAL-induced HUVECs, and inhibited the fusion of autophagosomes and lysosomes to prevent the completion of autophagic flux. In HUVECs treated with both D-GAL and AS-IV, the application MTK458 significantly increased the number of yellow spots and enhanced the expressions of P21, P53, PINK1, Parkin, LC3, and Beclin proteins. CONCLUSIONS AS-IV alleviates D-GAL-induced endothelial cell senescence by inhibiting the PINK1/Parkin pathway to regulate mitochondrial autophagy.
Humans ; Human Umbilical Vein Endothelial Cells/drug effects* ; Cellular Senescence/drug effects* ; Autophagy/drug effects* ; Saponins/pharmacology* ; Ubiquitin-Protein Ligases/metabolism* ; Mitochondria/drug effects* ; Triterpenes/pharmacology* ; Protein Kinases/metabolism* ; Galactose/pharmacology* ; Reactive Oxygen Species/metabolism* ; Signal Transduction/drug effects* ; Cells, Cultured ; Apoptosis/drug effects* ; Membrane Potential, Mitochondrial ; Cell Proliferation/drug effects*

Background Exposure to air pollutants increases the risk of diseases in multiple systems, including respiratory and cardiovascular systems, yet its association with neurological diseases remains unclear. Objective To quantitatively evaluate the association between short-term exposure to air pollutants and outpatient and emergency visits for neurological diseases, identify potential susceptible populations, and quantify associated disease burden. Methods Daily 24-hour average concentrations of fine particulate matter (PM_2.5), inhalable particulate matter (PM₁₀), sulfur dioxide (SO₂), nitrogen dioxide (NO₂), and carbon monoxide (CO), daily maximum 8-hour average concentration of ozone (O₃), daily meteorological data (24-hour average temperature, 24-hour average relative humidity), and data on daily outpatient and emergency department visits for neurological diseases from two hospitals in Conghua District, Guangzhou, China, were collected from 2015 to 2022. A time-stratified case-crossover design was adopted, and a conditional Poisson regression model was constructed to analyze the association between air pollution exposure and neurological disease visits. Two-pollutant models and sensitivity analysis were used to validate model stability. Stratified analyses by season (cold season: from November to March; warm season: from April to October), sex (male, female), and age (≤45 years, 46–60 years, ≥61 years) were performed to identify vulnerable group. Additionally, the number and proportion of neurological disease visits attributable to short-term air pollutant exposure were calculated. Results A total of 72 673 outpatient and emergency department visits for neurological diseases were included during the study period. Most of the patients were middle-aged and elderly individuals (69.89% were over 45 years old) and females (60.25%). The results of single-pollutant models showed that for each interquartile range (IQR) increase in exposure to PM_2.5, PM₁₀, SO₂, NO₂, CO, and O₃, the risk of outpatient and emergency department visits for neurological diseases increased by 7.54% (95%CI: 4.69%, 10.46%), 6.66% (95%CI: 3.92%, 9.46%), 16.72% (95%CI: 10.58%, 23.19%), 8.12% (95%CI: 4.82%, 11.53%), 5.60% (95%CI: 2.34%, 8.97%), and 6.11% (95%CI: 2.91%, 9.40%), respectively. The results of the two-pollutant model showed that the association between PM_2.5 and SO₂ exposure and outpatient and emergency department visits for neurological diseases were relatively stable. The stratified analyses showed that the effect of SO₂ was stronger in the cold season. It was estimated that 8.32% (95%CI: 5.55%, 10.96%) and 6.65% (95%CI: 4.27%, 8.96%) of the outpatient and emergency department visits were attributable to short-term exposure to SO₂ and PM_2.5, respectively. Conclusion Exposure to PM_2.5 and SO₂ is associated with increased risks of outpatient and emergency visits for neurological diseases. SO₂ shows stronger effects during the cold season, and exposure to air pollution contributes to up to 8.32% of neurological disease visits.

BACKGROUND:At present,the use of a locking bone plate combined with steel wire or steel cable for the treatment of periprosthetic femoral fracture often adopts monocortical fixation,which is not stable and the proximal end of the bone cannot be achieved anatomically fitted by plate.The customized anatomical plate system can effectively solve this problem. OBJECTIVE:To explore the biomechanical strength of a customized anatomical plate system in fixation of Vancouver BI periprosthetic femoral fracture. METHODS:CT thin layer scanning data of normal femurs of 1 006 cases were selected and input into the MIMICS 21.0 software to establish the three-dimensional reconstruction model of the femur,which was set as the three-dimensional reconstruction group.56 complete human femoral specimens were selected as the femoral specimen group.The measured results of the two groups for femoral anatomical appearance were compared.If there was no significant difference between the two groups,the approximate appearance of a customized anatomical plate system was designed based on the measurement results in MIMICS 21.0 software and NX11.0 software.The customized anatomical plate system was designed and prepared according to the above measurement results.Eight pairs of frozen human femurs were selected to make Vancouver BI periprosthetic femoral fracture,which of the left were thin layer scanned by dual-source CT to obtain data.The data were transferred to determine the customized anatomical plate system model by the above design software.Eight sets of customized anatomical plate systems were ultimately produced,relying on the instrument company.The eight pairs of models were numbered 1-8.The left side was fixed with the customized anatomical plate system(customized anatomical plate system group);the right side was fixed with a metal locking plate system-large locking plate(claw plate group).L1-L4 and R1-R4 were subjected to vertical short-cycle loading test and vertical loading test.L5-L8 and R5-R8 were subjected to horizontal short-cycle loading test and four-point bending test.The vertical loading test and four-point bending test were used to collect bending load,bending displacement,and bending strain.Two short cycle loading tests were used to collect strain displacement to compare the maximum load,maximum displacement,bending stiffness,and short-period displacement resistance of the two kinds of bone plates. RESULTS AND CONCLUSION:(1)There were no significant differences in all indexes between the three-dimensional reconstruction group and the femoral specimen group(P>0.05).Individual customized anatomical plate system was designed based on the measurement results combined with digital software.(2)In the vertical loading test,the maximum load was higher(P=0.015),the maximum bending displacement was smaller(P=0.014),and the bending stiffness was higher(P=0.005)in the customized anatomical plate system group compared with the claw plate group.(3)In the four-point bending test,the maximum load was higher(P=0.023),the bending stiffness was higher(P=0.005),and the maximum bending displacement was not significant(P=0.216>0.05)in the customized anatomical plate system group compared with the claw plate group.(4)In the vertical short-cycle loading test,the average level of bending displacement in the customized anatomical plate system group(0.23±0.10 mm)was significantly lower than that in the claw plate group(0.44±0.02 mm)(P<0.05).(5)There was no significant difference in the average level of bending displacement between the two groups in the horizontal short cycle loading test(P>0.05).(6)It is concluded that the customized anatomical plate system has personalized anatomical characteristics,and the fixation of Vancouver BI periprosthetic femoral fracture is more stable,which has certain significance for clinical treatment.

With the rapid development of information technology， research on ancient TCM books has shifted from the traditional collation and digitization into intelligent knowledge service， thereby achieving the deep integration of ancient TCM books collation and clinical needs. Based on the clinical problem and knowledge element theory， we implemented in-depth indexing and knowledge mining for 600 kinds of ancient TCM books， built a knowledge sharing service platform for ancient TCM books by integrating database， cloud platform， knowledge graph and other technologies， and carried out the thematic literature research and developed databases for four major diseases including stroke， heart failure， liver cirrhosis， and diabetes. The digital intelligence products have been applied in hundreds of hospitals for evaluation and feedback. Finally， through "digital processing plus intelligent application"， the two-way interaction between ancient TCM books and current clinical practice is realized， and the path and paradigm of ancient TCM books knowledge serving the modern prevention and control of major diseases is formed， providing reference for the innovative utilization of ancient TCM books.