Objective This study aimed to investigate the genetic diversity, differentiation, and population structure of Aedes albopictus across different geographical regions in Shandong Province, and to explore the relationship between genetic diversity and geographical distribution. Methods Between July and August 2024, ten Ae. albopictus populations were sampled from seven cities in Shandong Province. Genomic DNA was extracted from individual mosquitoes, and the mitochondrial cytochrome c oxidase subunit I(COⅠ)gene was amplified using PCR and sequenced. The obtained sequences were verified using BLAST and analyzed with MAFFT, MEGA 11, DnaSP v6.12, Arlequin 3.5, PopART 1.7, STRUCTURE 2.3.4 and the R packages adegenet and vegan to assess genetic diversity and population structure. Results A total of 229 COⅠ sequences(662 bp) was obtained, revealing ten variable sites with no insertions or deletions. The overall base composition showed an AT bias of 67.7%. Haplotype analysis identified 11 haplotypes, with Hap2 being the dominant and most widely distributed haplotype across all populations. Neutrality tests showed significant population expansion only in the Rizhao population. Mantel testing result revealed that geographical distance does not significantly impede gene flow. Overall, genetic differentiation among populations was low, indicating frequent gene flow. When combined with additional samples from Shanghai, Fujian, Guangdong, Yunnan, Hainan and Guangxi, STRUCTURE, UPGMA and DAPC analyses revealed two primary genetic clusters of Ae. albopictus. Conclusions Ae. albopictus populations in Shandong Province exhibit frequent gene flow, low genetic differentiation, and relatively low overall genetic diversity. However, the Rizhao population showed signs of recent expansion, highlighting the need for enhanced surveillance and targeted control measures in this area.

6-Thioguanine(6-TG)is an antineoplastic agent used in treatment of acute leukemia.However,significant interindividual variability in dosing regimens and frequent clinical manifestations of hepatotoxicity and myelosuppression as adverse effects have affected its therapeutic efficacy.Consequently,the development of rapid analytical methods for 6-TG in clinical samples,enabling continuous therapeutic drug monitoring of plasma concentrations,holds substantial significance in optimizing dosage regimens,mitigating adverse reactions,and investigating drug metabolism mechanisms.In this study,multi-tipped gold nanostars(AuNSs)were prepared.With bis-(p-sulfonylphenyl)phenylphosphine molecule as the protecting agent and internal standard molecule,the AuNSs were assembled onto a highly sensitive surface-enhanced Raman(SERS)substrate for developing a ratio-based SERS quantitative analysis method for 6-TG in serum.The AuNSs containing multiple tips and gaps exhibited strong local surface plasmon resonance effect and SERS activity,ensuring the sensitivity of the analytical method.Furthermore,the introduction of internal standard molecules could improve the reproducibility,which guaranteed this method suitable for rapid analysis of drug molecules in complex samples.Quantitative analysis of 6-TG was achieved with linear detetion range of 1.0×10?4-1.0 mmol/L.In the spiked recovery experiments of serum,the RSD was less than 5.32%,and the recoveries were 94%-104%,which proved that this method could be used for rapid quantitative determination of 6-TG in serum.This method provided a powerful tool for studying drug pharmacokinetics,which could promote the optimization of the usage methods of anti-cancer drugs,and it was expected to further enhance the clinical efficacy and safety of 6-TG,enabling it to achieve the best therapeutic effect.

Insulin is an important protein hormone that participates in multiple metabolic pathways.Biosynthetic insulin has been widely used in the treatment of type 1 and type 2 diabetes.Currently,the number of reported cases of insulin overdose both at home and abroad is gradually increasing,and insulin homicide is no longer a means of"committing murder without leaving a trace".At present,there are no systematic protocols for the identification of insulin overdose in the field of forensic medi-cine in China.This article introduces the causes,toxicological characteristics,forensic examination,labo-ratory testing methods and indicator reference of insulin overdose.Based on the identification practice and research results and referring to relevant studies on insulin overdose at home and abroad,this pa-per aims to provide recommendations and references for the formulation of forensic identification guide-lines for insulin overdose cases.

Objective To retrospectively analyze the association between metabolic factors and high-risk colorectal adenoma(CRA).Methods The medical records of patients aged 18-75 years who underwent their initial colonoscopy at Karamay Central Hospital of Xinjiang Uygur Autonomous Region from Jul 2000 to Mar 2017 were collected.The comparison between normal colonoscopy(NC)and high-risk CRA patients was conducted using an unpaired t-test,while chi-square test was used for categorical variables.Least absolute shrinkage and selection operator(LASSO)regression and Logistic regression were utilized to analyze the association between metabolic factors and high-risk CRA.Results A total of 1 798 patients meeting the inclusion and exclusion criteria were enrolled and divided into normal colonoscopy(NC)findings group(n=972)and high-risk CRA group(n=826).The high-risk CRA group exhibited significantly lower levels of high-density lipoprotein cholesterol(HDL-C)in comparison to the NC group,while uric acid and fibrosis 4(FIB-4)index levels were significantly higher than those observed in the NC group(all P<0.05).Based on LASSO regression analysis,we identified 12 variables that potentially influence the occurrence of high-risk CRA,including age,gender,smoking history,alcohol consumption history,non-alcoholic fatty liver disease(NAFLD),hypertension,coronary artery disease,hyperglycemia,hypercholesterolemia,low levels of HDL-C,elevated alanine aminotransferase,and elevated gamma-glutamyl transferase.Multivariate analysis revealed that individuals aged over 50 years,male gender,cigarette and alcohol consumption,low HDL-C levels,history of NAFLD and hypertension were identified as independent risk factors associated with high-risk CRA(P<0.05).In addition,without or with adjusting for age,sex,smoking,and drinking history,patients with a high TG/HDL-C ratio(the ratio≥2.68)had a significantly higher risk of high-risk CRA than those with a low TG/HDL-C ratio(the ratio<2.68)[odds ratios(ORs)were1.430 and 1.235 respectively,all P<0.05)].Without or with adjusting variables,the ORs for NAFLD patients with FIB-4 index>2.67 were 1.849(P=0.466)and 1.435(P=0.707),respectively.Conclusion A significant association exists between metabolic factors and high-risk CRA.Independent risk factors for high-risk CRA include older age(≥50 years),male,smoking history,alcohol consumption history,low levels of HDL-C,and a history of NAFLD and hypertension.Individuals exhibiting a TG/HDL-C ratio exceeding 2.68 manifest a significantly heightened susceptibility to the development of high-risk CRA.Therefore,elderly males with one or more aforementioned metabolic abnormalities should be considered a priority population for colorectal screening.

Objective:To analyze the association between standardized management of clinical research, initiated by investigators and guided by clinical research management policies in healthcare institutions, and changes in the research behavior of graduate students.Methods:Theses related to cardiovascular health published by graduate students in the Sichuan-Chongqing region of China between January 2019 and June 2024 were retrieved from the China National Knowledge Infrastructure database. Multilevel models were used to analyze changes in ethical compliance awareness, research methodology standardization, and academic collaboration of graduate students before and after policy implementation. Using Shapiro Wilk test and percentage representation.Results:Among the 712 theses included in this study, the proportion of studies with ethical review reports increased from 44.50% to 55.32% following the implementation of standardized management [odds ratio ( OR)=1.80, P=0.017]. Standardized management significantly improved the quality scores of cross-sectional studies and randomized controlled trials ( P<0.001), as well as significantly increased the frequencies of multi-center collaboration ( OR=2.84, P=0.001) and intra-provincial collaboration ( OR=2.80, P=0.001). Conclusions:Standardized clinical research management shows significant association with positive changes in the research behavior of graduate students. Further optimization of management measures is recommended to comprehensively enhance the clinical research capabilities of graduate students.

OBJECTIVE: To evaluate the short-term clinical efficacy of external fixation and internal fixation with steel plate in the treatment of unstable distal radius fractures (AO-23C type), based on the principles of Chinese osteosynthesis (CO). METHODS: Forty-eight patients with unstable distal radius fractures between January 2022 and February 2023 were retrospectively analyzed and divided into the CO external fixation group and internal fixation group. CO external fixation group consisted of 25 patients, including 7 males and 18 females, aged from 37 to 56 years old with an average of ( 52.6±11.3) years old. Among them, there were 7 patients of traffic accidents and 18 patients of falls, resulting in a total of 25 patients of closed fractures and no open fractures, the treatment was conducted using closed reduction and CO external fixation. The internal fixation group consisted of 23 patients, comprising 8 males and 15 females, age ranged from 41 to 59 years old, with an average age of(53.3±13.7) years old. Among them, 8 patients resulted from car accidents while the remaining 15 patients were caused by falls. All 23 patients were closed fractures without any open fractures observed. The technique of open reduction and internal fixation with steel plate was employed. The perioperative data, including injury-operation time, operation duration, blood loss, and length of hospital stay, were assessed in both groups. Additionally, the QuickDASH score and visual analogue scale (VAS) were evaluated. Range of motion and grip strength assessment, imaging findings such as palmar inclination angle, ulnar declination angle, radius length, articular surface step, intra-articular space measurements were also examined along with any complications. RESULTS: The follow-up duration ranged from 0 to 24 months, with an average duration of (16.0±3.8) months. The CO external fixation exhibited significantly shorter time from injury to operation (2.4±3.3) d vs (7.4±3.7) d, shorter operation duration (56.27±15.23) min vs (74.10±5.26) min, lower blood loss (14.52±6.54) ml vs (32.32±10.03) ml, and reduced hospitalization days (14.04±3.24 )d vs (16.45±3.05) d compared to the internal fixation group (P<0.05). The QuickDASH score at 12 months post-operation was (8.21±1.64) in the CO external fixation group, while no significant difference was observed in the internal fixation group (7.04±3.64), P>0.05. There were no statistically significant differences in VAS between two groups at 6 weeks, as well as 1 and 3 months post-surgery (P>0.05). Additionally, there were no significant disparities observed in terms of range of motion and grip strength between two groups at the 2-year follow-up after the operation (P>0.05). After 12 months of surgery, the CO external fixation group exhibited a significantly smaller palmar inclination angle (17.90±2.18) ° vs (19.87±3.21) °, reduced articular surface step (0.11±0.03) mm vs (0.17±0.02) mm, and shorter radius length (8.16±1.11) mm compared to the internal fixation group (9.59±1.02) mm, P<0.05. The ulnar deviation angle and intra-articular space did not show any significant difference between two groups (P>0.05). The reduced fell within the allowable range between the CO external fixation group (23 out of 25 cases) and the internal fixation group (21 out of 23 cases) was not statistically significant (P=0.29). There was no significant difference in complications between the two groups(P>0.05). CONCLUSION Both the CO external fixation and open reduction with plate internal fixation demonstrate clinical efficacy in managing unstable distal radius fractures. The CO external fixation offers advantages in shorter injury-to-operation times, reduced intraoperative blood loss, and decreased surgical durations, while radial shortening is more effectively controlled by internal fixation.
Humans ; Male ; Female ; Middle Aged ; Radius Fractures/physiopathology* ; Adult ; Bone Plates ; Fracture Fixation, Internal/methods* ; External Fixators ; Retrospective Studies ; Fracture Fixation/methods* ; Wrist Fractures

OBJECTIVE: To establish digital model of Ideberg typeⅡregional glenoid fracture anatomical plate with 3D metal printing technology. METHODS: The scapular imaging data of a 34-year-old healthy male volunteer were retrospectively selected. Mimics 15.01, NX 12.0 and other software were used to design Ideberg typeⅡ regional scapular fracture guide plate system. STL data were input into a metal 3D printer to print 1∶1 scapular model and anatomical plate of scapular pelvis with guide sleeve. The fit of the plate was tested in vitro and the accuracy of the screw position was evaluated by imaging. The printing time of scapular model, design of the nail path and making time of the anatomic guided plate were recorded. RESULTS: 3D metal-printed Ideberg typeⅡ guide plate for scapular fracture fitted well to 3D printed scapular model, the locking screw was oriented accurately, and X-ray and CT showed good screw position. The printing time of scapula model, time of nail path design and special-shaped anatomical guide plate production were 52.0, 15.0 and 320 min, respectively. CONCLUSION Anatomical plates based on 3D metal printing technology could achieve good adhesion of Ideberg typeⅡ regional fractures and precise screw placement, providing a new and accurate surgical method for the treatment of Ideberg typeⅡ glenoid fractures.
Humans ; Printing, Three-Dimensional ; Male ; Adult ; Bone Plates ; Fractures, Bone/diagnostic imaging* ; Fracture Fixation, Internal/methods* ; Pelvic Bones/surgery* ; Metals ; Scapula/surgery* ; Models, Anatomic

OBJECTIVE: To evaluate the effects of posterior cruciate ligament(PCL) resection on soft tissue elasticity and knee stability in total knee arthroplasty(TKA). METHODS: Six adult cadaveric knee specimens (involving 10 knees) were included in the study. With the assistance of the robotic system(TiRobot Recon, TINAVI, Beijing), total knee arthroplasty (TKA) was performed sequentially using cruciate retaining (CR) prostheses and posterior stabilizing (PS) prostheses. Between the two surgical procedures, the femoral and tibial osteotomy surfaces were not altered;only the posterior cruciate ligament (PCL) was resected and the intercondylar fossa was treated. After installing the femoral trial component, a soft tissue balance solver was used to apply tension ranging from 30 N to 90 N in 5 N increments at 0°, 10°, and 90° of knee flexion. Meanwhile, the medial and lateral joint gaps were measured synchronously. Based on the tension-gap coupling data, the equivalent elastic coefficients of the medial and lateral soft tissue sleeves at different knee flexion angles, as well as the range of the joint line convergence angle (JLCA) under fixed varus-valgus stress, were calculated. Additionally, the gap balance status under 80 N of tension was analyzed. Self-control comparisons of each indicator were conducted before and after PCL resection to analyze the change patterns. RESULTS: After PCL resection, in the fully extended position (knee flexion 0°). The medial equivalent elastic coefficient was 32.2 (25.7, 63.3) N·mm^-1 for the CR prosthesis and 27.7 (22.0, 51.9) N·mm^-1 for the PS prosthesis, and the statistically significant difference (P=0.013). The range of JLCA was 0.41°(0.26, 0.55)° for the CR prosthesis, which was smaller than 0.75° (0.40, 0.98)° for the PS prosthesis, and the difference was statistically significant(P=0.041). At 90° of knee flexion, the medial joint gap was 10.7(10.1, 11.7) mm for the CR prosthesis, which was smaller than 12.1(10.9, 15.1) mm for the PS prosthesis, with a statistically significant difference(P=0.011). No statistically significant differences were observed in other joint gaps. CONCLUSION PCL resection reduces the rigidity of the medial soft tissues in the fully extended knee and increases the medial joint gap in the flexed position, thereby affecting knee stability and balance. This finding suggests that PS and CR prostheses may require different morphological designs, and there should be differences in indications and osteotomy strategies between CR-TKA and PS-TKA. CR-TKA is more suitable for patients with preoperative medial soft tissue laxity.
Humans ; Posterior Cruciate Ligament/physiopathology* ; Knee Joint/physiopathology* ; Arthroplasty, Replacement, Knee ; Elasticity ; Male ; Female ; Middle Aged ; Aged ; Biomechanical Phenomena ; Adult

PURPOSE: The rate of complications among patients undergoing surgery has increased due to infection with SARS-CoV-2 and other variants of concern. However, Omicron has shown decreased pathogenicity, raising questions about the risk of postoperative complications among patients who are infected with this variant. This study aimed to investigate complications and related factors among patients with recent Omicron infection prior to undergoing orthopedic surgery. METHODS: A historical control study was conducted. Data were collected from all patients who underwent surgery during 2 distinct periods: (1) between Dec 12, 2022 and Jan 31, 2023 (COVID-19 positive group), (2) between Dec 12, 2021 and Jan 31, 2022 (COVID-19 negative control group). The patients were at least 18 years old. Patients who received conservative treatment after admission or had high-risk diseases or special circumstances (use of anticoagulants before surgery) were excluded from the study. The study outcomes were the total complication rate and related factors. Binary logistic regression analysis was used to identify related factors, and odds ratio (OR) and 95% confidence interval (CI) were calculated to assess the impact of COVID-19 infection on complications. RESULTS: In the analysis, a total of 847 patients who underwent surgery were included, with 275 of these patients testing positive for COVID-19 and 572 testing negative. The COVID-19-positive group had a significantly higher rate of total complications (11.27%) than the control group (4.90%, p < 0.001). After adjusting for relevant factors, the OR was 3.08 (95% CI: 1.45-6.53). Patients who were diagnosed with COVID-19 at 3-4 weeks (OR = 0.20 (95% CI: 0.06-0.59), p = 0.005), 5-6 weeks (OR = 0.16 (95% CI: 0.04-0.59), p = 0.010), or ≥7 weeks (OR = 0.26 (95% CI: 0.06-1.02), p = 0.069) prior to surgery had a lower risk of complications than those who were diagnosed at 0-2 weeks prior to surgery. Seven factors (age, indications for surgery, time of operation, time of COVID-19 diagnosis prior to surgery, C-reactive protein levels, alanine transaminase levels, and aspartate aminotransferase levels) were found to be associated with complications; thus, these factors were used to create a nomogram. CONCLUSION Omicron continues to be a significant factor in the incidence of postoperative complications among patients undergoing orthopedic surgery. By identifying the factors associated with these complications, we can determine the optimal surgical timing, provide more accurate prognostic information, and offer appropriate consultation for orthopedic surgery patients who have been infected with Omicron.
Humans ; COVID-19/complications* ; Male ; Female ; Middle Aged ; Postoperative Complications/epidemiology* ; SARS-CoV-2 ; Orthopedic Procedures/adverse effects* ; Aged ; Nomograms ; Adult ; Retrospective Studies ; Risk Factors