Organoid-on-a-chip technology represents a promising interdisciplinary advancement that merges two cutting-edge biomedical platforms: stem cell-derived organoids and microfluidics-based organ-on-a-chip systems. Organoids are self-organizing three-dimensional (3D) cell cultures that mimic the key structural and functional features of in vivo organs. However, traditional organoid culture systems are often static, lacking dynamic environmental cues and suffering from limitations such as batch-to-batch variability, low stability, and low throughput. Organ-on-a-chip platforms, by contrast, utilize microfluidic technologies to simulate the dynamic physiological microenvironment of human tissues and organs, enabling more controlled cell growth and differentiation. By integrating the advantages of organoids and organ-on-a-chip technologies, organoid-on-a-chip systems transcend the limitations of conventional 3D culture models, offering a more physiologically relevant and controllable in vitro platform. In organoid-on-a-chip systems, stem cells or pre-formed organoids are cultured in micro-engineered environments that mimic in vivo conditions, enabling precise control over fluid flow, mechanical forces, and biochemical cues. Specifically, these platforms employ advanced strategies including bio-inspired 3D scaffolds for structural support, precise spatial cell patterning via 3D bioprinting, and integrated biosensors for real-time monitoring of metabolic activities. These synergistic elements recreate complex extracellular matrix signals and ensure high structural fidelity. Based on structural complexity, organoid-on-a-chip systems are classified into single-organoid and multi-organoid types, forming a trajectory from unit biomimicry to systemic simulation. Single-organoid chips focus on highly biomimetic units by integrating vascular, immune, or neural functions. Multi-organoid chips simulate inter-organ crosstalk and systemic homeostasis, advancing complex disease modeling and PK/PD evaluation. This emerging technology has demonstrated broad application potential in multiple fields of biomedicine. Organoid-on-a-chip systems can recapitulate organ developmentin vitro, facilitating research in developmental biology. They mimic organ-specific physiological activities and mechanisms, showing promising applications in regenerative medicine for tissue repair or replacement. In disease modeling, they support the reconstruction of models for neurodegenerative, inflammatory, infectious, metabolic diseases, and cancers. These platforms also enable in vitro drug testing and pharmacokinetic studies (ADME). Patient-derived chips preserve genetic and pathological features, offering potential for precision medicine. Additionally, they reduce species differences in toxicology, providing human-relevant data for environmental, food, cosmetic, and drug safety assessments. Despite progress, organoid-on-a-chip systems face challenges in dynamic simulation, extracellular matrix (ECM) variability, and limited real-time 3D imaging, requiring improved materials and the integration of developmental signals. Current bottlenecks also include the high technical threshold for automation and the lack of standardized validation frameworks for regulatory adoption. Meanwhile, the concept of a “human-on-a-chip” has been proposed to mimic whole-body physiology by integrating multiple organoid modules. This approach enables systemic modeling of drug responses and toxicity, with the potential to reduce animal testing and revolutionize drug development. Future advancements in bio-responsive hydrogels and flexible biosensors will further empower these platforms to bridge the gap between bench-side research and personalized clinical interventions. In conclusion, organoid-on-a-chip technology offers a transformative in vitro model that closely recapitulates the complexity of human tissues and organ systems. It provides an unprecedented platform for advancing biomedical research, clinical translation, and pharmaceutical innovation. Continued development in biomaterials, microengineering, and analytical technologies will be essential to unlocking the full potential of this powerful tool.

Organoid-on-a-chip technology represents a promising interdisciplinary advancement that merges two cutting-edge biomedical platforms: stem cell-derived organoids and microfluidics-based organ-on-a-chip systems. Organoids are self-organizing three-dimensional (3D) cell cultures that mimic the key structural and functional features of in vivo organs. However, traditional organoid culture systems are often static, lacking dynamic environmental cues and suffering from limitations such as batch-to-batch variability, low stability, and low throughput. Organ-on-a-chip platforms, by contrast, utilize microfluidic technologies to simulate the dynamic physiological microenvironment of human tissues and organs, enabling more controlled cell growth and differentiation. By integrating the advantages of organoids and organ-on-a-chip technologies, organoid-on-a-chip systems transcend the limitations of conventional 3D culture models, offering a more physiologically relevant and controllable in vitro platform. In organoid-on-a-chip systems, stem cells or pre-formed organoids are cultured in micro-engineered environments that mimic in vivo conditions, enabling precise control over fluid flow, mechanical forces, and biochemical cues. Specifically, these platforms employ advanced strategies including bio-inspired 3D scaffolds for structural support, precise spatial cell patterning via 3D bioprinting, and integrated biosensors for real-time monitoring of metabolic activities. These synergistic elements recreate complex extracellular matrix signals and ensure high structural fidelity. Based on structural complexity, organoid-on-a-chip systems are classified into single-organoid and multi-organoid types, forming a trajectory from unit biomimicry to systemic simulation. Single-organoid chips focus on highly biomimetic units by integrating vascular, immune, or neural functions. Multi-organoid chips simulate inter-organ crosstalk and systemic homeostasis, advancing complex disease modeling and PK/PD evaluation. This emerging technology has demonstrated broad application potential in multiple fields of biomedicine. Organoid-on-a-chip systems can recapitulate organ developmentin vitro, facilitating research in developmental biology. They mimic organ-specific physiological activities and mechanisms, showing promising applications in regenerative medicine for tissue repair or replacement. In disease modeling, they support the reconstruction of models for neurodegenerative, inflammatory, infectious, metabolic diseases, and cancers. These platforms also enable in vitro drug testing and pharmacokinetic studies (ADME). Patient-derived chips preserve genetic and pathological features, offering potential for precision medicine. Additionally, they reduce species differences in toxicology, providing human-relevant data for environmental, food, cosmetic, and drug safety assessments. Despite progress, organoid-on-a-chip systems face challenges in dynamic simulation, extracellular matrix (ECM) variability, and limited real-time 3D imaging, requiring improved materials and the integration of developmental signals. Current bottlenecks also include the high technical threshold for automation and the lack of standardized validation frameworks for regulatory adoption. Meanwhile, the concept of a “human-on-a-chip” has been proposed to mimic whole-body physiology by integrating multiple organoid modules. This approach enables systemic modeling of drug responses and toxicity, with the potential to reduce animal testing and revolutionize drug development. Future advancements in bio-responsive hydrogels and flexible biosensors will further empower these platforms to bridge the gap between bench-side research and personalized clinical interventions. In conclusion, organoid-on-a-chip technology offers a transformative in vitro model that closely recapitulates the complexity of human tissues and organ systems. It provides an unprecedented platform for advancing biomedical research, clinical translation, and pharmaceutical innovation. Continued development in biomaterials, microengineering, and analytical technologies will be essential to unlocking the full potential of this powerful tool.

Objective: To explore the effect of a computer assisted audiovisual combined intervention model on the core symptoms of children with autism spectrum disorder (ASD), in order to provide references for enriching intervention and treatment methods for ASD children. Methods: From December 2023 to March 2024, 36 ASD children aged 4-8 years were recruited from Tianjin Disabled Persons Rehabilitation Center and Xinxinyu Children s Rehabilitation Center, and were divided into a training group (22 cases) and a control group (14 cases). The training group completed a 12 week audiovisual training course (visual sessions:twice a week, for 50-60 minutes each session; auditory sessions:three times a week, for 15 minutes each time), while the control group received only conventional treatment interventions. Before and after the intervention, the core symptoms of ASD children were assessed using the Short Sensory Profile (SSP), Social Responsiveness Scale (SRS), and Repetitive Behavior Questionnaire-2 ( RBQ- 2). Eye tracking experiments were used to test preferences for social attention. Results: Before the intervention, there were no statistically significant differences in the total scores and factor scores of the SSP and RBQ-2 scales between the two groups ( t =-1.63, 0.38, both P >0.05). The SRS total score, social communication, and restricted interests and repetitive behavior factor scores of the training group (90.68±25.83, 33.36±11.80, 15.64±7.00) were significantly higher than those of the control group (72.29±19.84, 24.93±7.85, 10.21±5.67) ( t =2.27, 2.36, 2.43, all P <0.05). Children in the training group with higher social communication factor scores before the intervention scored lower than the control group at the post intervention test (simple slope=-14.17, t =-2.48, P = 0.02), while there was no statistically significant difference in post intervention scores between children with lower social communication factor scores before the intervention and the control group (simple slope=2.31, t =0.57, P >0.05). Eye tracking experiments showed that the total fixation time on geometric images decreased significantly more in the training group [ -4.56 (-11.42, 1.21)] compared to the control group [6.55 (-0.32, 16.53)] after the intervention ( Z=2.48, P <0.05). Conclusions The computer assisted audiovisual intervention model can effectively improve the core symptoms of ASD children with poorer social communication levels. The promotion of the intervention model needs to consider individual differences in ASD.

ObjectiveThis study aimed to investigate the anti-Mycoplasma pneumoniae (MP) activity of luteolin and elucidate its underlying mechanisms. MethodsLuteolin was identified as the primary active compound from the polyphenol extract ofF. diotrys using network pharmacology. Its efficacy was evaluated against two MP strains: the standard strain M129 and the multidrug-resistant strain M19. A modified culture medium with visual characteristics was employed to determine the minimum inhibitory concentration (MIC) of luteolin. The expression of key proteins involved in MP growth and pathogenicity was assessed by qRT-PCR following luteolin treatment. Additionally, the viability of A549 cells infected with MP was compared between luteolin-treated and untreated groups. In vivo anti-MP activity was evaluated using a mouse model, and the expression of inflammatory cytokines in lung tissues was analyzed. ResultsLuteolin effectively inhibited both MP strains, with MIC₉₀ values of 100 mg/L for M19 and M129. Treatment with luteolin significantly downregulated the expression of adhesion proteins P1 and P30 in both strains. However, the expression of P65, HMW3, TrmB, and CARDS TX was reduced only in the M19 strain following luteolin intervention. Luteolin also enhanced the growth and viability of A549 cells infected with MP. In the mouse model, luteolin treatment resulted in steady weight gain and was well tolerated. The bacteriostatic rate of luteolin in lung tissues was 50.7%, significantly higher than the 25.2% observed in the roxithromycin group. Furthermore, luteolin reduced the expression of inflammatory factors, including IL-6, TNF-α, and HMGB1, in MP-infected mice. ConclusionLuteolin effectively and safely inhibits the proliferation and pathogenicity of MP, particularly the drug-resistant M19 strain, by downregulating the expression of toxicity-associated proteins (P1, P30, P65, HMW3, TrmB, CARDS TX) and modulating host inflammatory responses. These findings suggest that luteolin may offer a novel therapeutic strategy for treating MP infections, especially those caused by drug-resistant strains.

ObjectiveThis study aimed to investigate the anti-Mycoplasma pneumoniae (MP) activity of luteolin and elucidate its underlying mechanisms. MethodsLuteolin was identified as the primary active compound from the polyphenol extract ofF. diotrys using network pharmacology. Its efficacy was evaluated against two MP strains: the standard strain M129 and the multidrug-resistant strain M19. A modified culture medium with visual characteristics was employed to determine the minimum inhibitory concentration (MIC) of luteolin. The expression of key proteins involved in MP growth and pathogenicity was assessed by qRT-PCR following luteolin treatment. Additionally, the viability of A549 cells infected with MP was compared between luteolin-treated and untreated groups. In vivo anti-MP activity was evaluated using a mouse model, and the expression of inflammatory cytokines in lung tissues was analyzed. ResultsLuteolin effectively inhibited both MP strains, with MIC₉₀ values of 100 mg/L for M19 and M129. Treatment with luteolin significantly downregulated the expression of adhesion proteins P1 and P30 in both strains. However, the expression of P65, HMW3, TrmB, and CARDS TX was reduced only in the M19 strain following luteolin intervention. Luteolin also enhanced the growth and viability of A549 cells infected with MP. In the mouse model, luteolin treatment resulted in steady weight gain and was well tolerated. The bacteriostatic rate of luteolin in lung tissues was 50.7%, significantly higher than the 25.2% observed in the roxithromycin group. Furthermore, luteolin reduced the expression of inflammatory factors, including IL-6, TNF-α, and HMGB1, in MP-infected mice. ConclusionLuteolin effectively and safely inhibits the proliferation and pathogenicity of MP, particularly the drug-resistant M19 strain, by downregulating the expression of toxicity-associated proteins (P1, P30, P65, HMW3, TrmB, CARDS TX) and modulating host inflammatory responses. These findings suggest that luteolin may offer a novel therapeutic strategy for treating MP infections, especially those caused by drug-resistant strains.

Objective To gain insights into the biological characteristics of different populations of Culex tritaeniorhynchus within and around the Yellow Sea wetland from the perspective of the occurrence of resistance, we investigated the levels of resistance to deltamethrin and kdr gene mutation in the wetland and its peripheral areas. Methods Specimens were collected from Cx. tritaeniorhynchus populations at two monitoring sites in the Rare Bird National Nature Reserve and Tiaozi Ni Wetland Scenic Area, and also from two populations in Yancheng City and the Liuhe District of Nanjing, and the resistance of these mosquitoes to deltamethrin was determined using the CDC biotest bottle method. For each concentration of deltamethrin assessed, a random subset of exposed specimens was selected for amplification of the kdr gene fragment, followed by Sanger sequencing to identify and analyze resistance-associated mutations. Results The LC50 levels of deltamethrin among mosquitoes from the four populations in Luhe, Yancheng, the Rare Bird National Nature Reserve and the Tiaozi Ni Wetland Scenic Area were 2.048 5, 7.798 2, 3.473 3, and 17.695 5 mg/mL, respectively, with corresponding concentrations of deltamethrin ranging from 0.005 to 5.000,0.050 to 50.000,0.050 to 25.000 and 0.050 to 50.000 mg/mL, respectively. Furthermore, the ranges of the KT50 values were 11.76-107.43, 67.05-216.30,29.77-107.43 and 28.40-329.51 min; the 1-h knockdown rates were 34.58%-99.15%, 9.52%-43.80%, 55.09%-73.01%, and 10.09%-68.07%; and the 24-h mortality rates were 12.15%-67.52%,9.52%-79.56%,13.17%-82.21%, and 11.01%-78.99%, respectively. With respect to kdr gene mutation, we assayed a total of 63,70,59, and 57 mosquitoes for the four populations, for which we detected L1014F mutation frequencies of 14.29%, 35.00%, 20.34%, and 31.58%, respectively, with a majority of these mutations being heterozygous for resistance. In addition, five adult mosquitoes were identified has having synonymous mutations at site 1011[i. e. , AAT(asparagine)mutation to AAC(asparagine)]. Conclusions Our findings revealed the clear resistance of Cx. tritaeniorhynchus to deltamethrin in the Yancheng region of the Yellow Sea wetland, and the resistance phenotype and kdr frequency of Cx. tritaeniorhynchus in the wetland environment were comparable to those of Cx. tritaeniorhynchus in the wetland environment, thereby indicating that the resistance of different populations of Cx. tritaeniorhynchus was homogeneous under the pressure of different insecticide selection within and around the wetland. However, the underlying mechanisms need to be further studied.

Objective To investigate the prevalence of soil-transmitted nematode human infections in Hubei Province from 2016 to 2023, so as to provide insights into formulation of soil-transmitted nematodiasis control strategies and evaluation of soil-transmitted nematodiasis control effectiveness. Methods There were 10 surveillance points established in Hubei Province for soil-transmitted nematodiasis each year from 2016 to 2023. The surveillance points were divided into eastern, western, southern, northern and central regions according to geographical locations, and one administrative village was sampled from a township in each region as a surveillance point. Then, at least 200 permanent residents at ages of over 3 years were randomly sampled at each point, with at least 1 000 individuals sampled. Soil-transmitted nematode infection was detected using a modified Kato-Katz thick smear method (two slides for one stool sample), and Enterobius vermicularis infection was additionally detected with a cellophane tape test among children at ages of 3 to 9 years. The prevalence of soil-transmitted nematode human infections was descriptively analyzed. Results A total of 80 547 individuals underwent surveillance for soil-transmitted nematodiasis in Hubei Province from 2016 to 2023, and a total of 262 individuals were detected with soil-transmitted nematode infections, including two cases with mixed infections, yielding an overall prevalence rate of 0.33% (262/80 547). The prevalence rates of hookworm, Ascaris lumbricoides, Trichuris trichiura, and E. vermicularis infections were 0.02% (20/80 547), 0.07% (55/80 547), 0.02% (15/80 547) and 0.22% (174/80 547), respectively, appearing a parasite species-specific prevalence rate (χ² = 250.235, P < 0.05), and the prevalence rates of soil-transmitted nematode infections were 0.50%(51/10271),0.37%(34/9120),0.39%(39/10099),0.40%(41/10168), 0.36% (37/10 234), 0.45% (46/10 211), 0.03% (3/10 238) and 0.11% (11/10 206) in Hubei Province from 2016 to 2023, respectively, showing a year-specific prevalence rate (χ² = 60.589, P < 0.05). Soil-transmitted nematode infections were detected across 36 surveillance points, and there was a significant difference in the prevalence of soil-transmitted nematode infections among surveillance points (0.02% to 3.30%, P < 0.001). In addition, the differences in prevalence rates of human soil-transmitted nematode infection among different age groups (χ² = 531.091, P < 0.05), occupations (P < 0.001), and education levels (P < 0.001) were all statistically significant. Among these, the children at ages of 3 to 9 years old (1.40%, 174/12 461), nursery-school children (1.69%, 90/5 312) and preschool-aged children (1.56%, 93/5 969) were relatively high. Conclusions The overall prevalence of soil-transmitted nematodiasis was low in Hubei Province from 2016 to 2023; however, the prevalence varied across regions and among populations, with E. vermicularis as the predominant species of soil-transmitted nematode. Soil-transmitted nematodiasis control should be given a high priority in key areas in Hubei Province, and preschool children, primary school students, and individuals with a low educational level are recommended as key target populations for health education and interventions.

Based on advancements in modern medical research regarding the intricate connection between the endocrine and exocrine functions of the pancreas， as well as the relationship between pancreatic functions and traditional Chinese medicine （TCM） spleen system， this paper discussed the categorization of the pancreas. It is proposed that the pancreas is neither a true zang organ nor a fu organ， but possessed the attributes of an extraordinary fu-organ and can be classified under the spleen. The spleen governs transportation and transformation， ascent of the clear and dispersion of essence， which encompasses the endocrine and exocrine functions， and pancreatic enzymes and glucose-regulating hormones form the material basis for the spleen's function of dispersing essence. Diseases of the pancreas exhibit characteristics of both zang-organ deficiency and fu-organ excess， so treatment should simultaneously supplement zang-organ disease and regulate fu-organ disease when pancreas showing endocrine and exocrine co-morbidities， with focus on restoring the pancreas （spleen）'s dispersing essence function. Therapeutic strategies include supplementing spleen qi， nourishing spleen yin to strengthen spleen earth， unblocking spleen collaterals， raising spleen yang， and removing spleen turbidity to support the spleen's dispersing essence function， so as to replenish the essential qi of zang-fu organs， ensure their distribution throughout the body， and improve the endocrine and exocrine functions of the pancreas.

Immobilized enzyme-based enzyme electrode biosensors, characterized by high sensitivity and efficiency, strong specificity, and compact size, demonstrate broad application prospects in life science research, disease diagnosis and monitoring, etc. Immobilization of enzyme is a critical step in determining the performance (stability, sensitivity, and reproducibility) of the biosensors. Random immobilization (physical adsorption, covalent cross-linking, etc.) can easily bring about problems, such as decreased enzyme activity and relatively unstable immobilization. Whereas, directional immobilization utilizing amino acid residue mutation, affinity peptide fusion, or nucleotide-specific binding to restrict the orientation of the enzymes provides new possibilities to solve the problems caused by random immobilization. In this paper, the principles, advantages and disadvantages and the application progress of enzyme electrode biosensors of different directional immobilization strategies for enzyme molecular sensing elements by specific amino acids (lysine, histidine, cysteine, unnatural amino acid) with functional groups introduced based on site-specific mutation, affinity peptides (gold binding peptides, carbon binding peptides, carbohydrate binding domains) fused through genetic engineering, and specific binding between nucleotides and target enzymes (proteins) were reviewed, and the application fields, advantages and limitations of various immobilized enzyme interface characterization techniques were discussed, hoping to provide theoretical and technical guidance for the creation of high-performance enzyme sensing elements and the manufacture of enzyme electrode sensors.

BACKGROUND:There is still no consensus on the optimal internal fixation for the treatment of Pauwels Ⅲ femoral neck fracture,and most of the related finite element analyses have been performed using a single simplified loading condition,and the biomechanical properties of commonly used internal fixation devices need to be further investigated. OBJECTIVE:To analyze the biomechanical characteristics of Pauwels Ⅲ femoral neck fractures treated with cannulated compression screw,dynamic hip screw,and femoral neck system by finite element method under different loading conditions of single-leg standing loads and sideways fall loads. METHODS:The DICOM data of healthy adult femur were obtained by CT scanning,imported into Mimics 15.0 software to obtain the rough model of bone tissue.The data exported from Mimics were optimized by Geomagics software,and then three internal fixation models were built and assembled with the femur model according to the parameters of the clinical application of the cannulated compression screw,dynamic hip screw,and femoral neck system by using Pro/E software.Finally,the three internal fixation models were imported into Ansys software for loading and calculation to analyze the stress distribution and displacement of the femur and the internal fixation under different working conditions of single-leg standing loads and sideways fall loads,as well as the stress characteristics of the calcar femorale and Ward's triangle. RESULTS AND CONCLUSION:(1)Under the single-leg standing load and the sideways fall load,the proximal femoral stress of the three internal fixation models was mainly distributed above the fracture end of the femoral neck.The peak stress of the proximal femoral end,fracture end,Ward triangle,and calcar femorale of the three internal fixation models were the smallest in the femoral neck system model and the largest in the cannulated compression screw model.(2)Under the single-leg standing load and the sideways fall load,the peak displacement of the proximal femur of the three internal fixation models was all located at the top of the femoral head,and the peak displacement was the smallest in the femoral neck system model and the largest in the cannulated compression screw model.(3)The peak displacement of the three internal fixation models was all located at the top of the internal fixation device under the single-leg standing and sideways fall loading conditions,and the peak displacement values were the smallest in the femoral neck system internal fixation model and the largest in the cannulated compression screw internal fixation model.(4)The internal fixation stress of the three internal fixation models was mainly distributed in the area near the fracture end of the internal fixation device under the single-leg standing and sideways fall loads,and the peak value of internal fixation stress was the smallest in the femoral neck system model and the largest in the cannulated compression screw model.(5)These results suggest that the mechanical stability of the femoral neck system is the best,but there may be a risk of stress shielding of the fracture end and calcar femorale.The stress of the internal fixation device of the femoral neck system is more dispersed,and the risk of internal fixation break is lower.