Purpose: The purpose of this study was to investigate the accuracy of digital mounting with occlusal scans in the interocclusal record for a full-mouth fixed prosthetic treatment condition. Materials and Methods: The entire maxillary teeth were prepared in a dentiform model and attached to an articulator in maximum intercuspation. Temporary crowns were fabricated and occlusion was adjusted. After scanning the arch with tooth preparation, digital mounting was performed using an occlusion scan of the anterior or posterior teeth areas. The accuracy of the positioned jaw relation was evaluated three-dimensionally through positional deviation and angular error of the occlusal plane. Afterwards, the same procedure was repeated on the partially edentulous model to evaluate the accuracy of digital interocclusal record. Kruskal-Wallis test and Mann-Whitney U test were used for statistical analysis, and the significance level was set at 0.05. Results: There was no significant difference in the positional error at the centerof the arch in the digitally established jaw relation depending on the scan area used and remaining tooth conditions (P = 0.53). Theangular error of the occlusal plane was larger when the anterior teeth were used as the overlapping area, and a smaller error value was observed when both posterior teeth were used as the overlapping area (P < 0.001). Conclusion The use of bilateral posterior occlusal scans is recommended when digitally mounting the jaw relation established with temporary teeth during full-mouth fixed prosthetic treatment.

Purpose: The purpose of this study was to investigate the accuracy of digital mounting with occlusal scans in the interocclusal record for a full-mouth fixed prosthetic treatment condition. Materials and Methods: The entire maxillary teeth were prepared in a dentiform model and attached to an articulator in maximum intercuspation. Temporary crowns were fabricated and occlusion was adjusted. After scanning the arch with tooth preparation, digital mounting was performed using an occlusion scan of the anterior or posterior teeth areas. The accuracy of the positioned jaw relation was evaluated three-dimensionally through positional deviation and angular error of the occlusal plane. Afterwards, the same procedure was repeated on the partially edentulous model to evaluate the accuracy of digital interocclusal record. Kruskal-Wallis test and Mann-Whitney U test were used for statistical analysis, and the significance level was set at 0.05. Results: There was no significant difference in the positional error at the centerof the arch in the digitally established jaw relation depending on the scan area used and remaining tooth conditions (P = 0.53). Theangular error of the occlusal plane was larger when the anterior teeth were used as the overlapping area, and a smaller error value was observed when both posterior teeth were used as the overlapping area (P < 0.001). Conclusion The use of bilateral posterior occlusal scans is recommended when digitally mounting the jaw relation established with temporary teeth during full-mouth fixed prosthetic treatment.

Purpose: The purpose of this study was to investigate the accuracy of digital mounting with occlusal scans in the interocclusal record for a full-mouth fixed prosthetic treatment condition. Materials and Methods: The entire maxillary teeth were prepared in a dentiform model and attached to an articulator in maximum intercuspation. Temporary crowns were fabricated and occlusion was adjusted. After scanning the arch with tooth preparation, digital mounting was performed using an occlusion scan of the anterior or posterior teeth areas. The accuracy of the positioned jaw relation was evaluated three-dimensionally through positional deviation and angular error of the occlusal plane. Afterwards, the same procedure was repeated on the partially edentulous model to evaluate the accuracy of digital interocclusal record. Kruskal-Wallis test and Mann-Whitney U test were used for statistical analysis, and the significance level was set at 0.05. Results: There was no significant difference in the positional error at the centerof the arch in the digitally established jaw relation depending on the scan area used and remaining tooth conditions (P = 0.53). Theangular error of the occlusal plane was larger when the anterior teeth were used as the overlapping area, and a smaller error value was observed when both posterior teeth were used as the overlapping area (P < 0.001). Conclusion The use of bilateral posterior occlusal scans is recommended when digitally mounting the jaw relation established with temporary teeth during full-mouth fixed prosthetic treatment.

Purpose: Current clinical practices favor less or no thyroid-stimulating hormone (TSH) suppression for low- to intermediate-risk thyroid cancer patients who receive thyroid lobectomy. The association of TSH suppression on healthrelated quality of life (HR-QoL) in patients after thyroid lobectomy is not well studied. This study aimed to evaluate the effect of TSH suppression on patient HR-QoL after thyroid lobectomy. Methods: This study included patients enrolled in an ongoing, multicenter, randomized controlled study investigating the effects of TSH suppression. Patients were randomized to either the low-TSH group (TSH target range, 0.3–1.99 μIU/ mL) or the high-TSH group (TSH target range, 2.0–7.99 μIU/mL). The HR-QoL, hyperthyroidism symptom, and depression symptom questionnaires performed preoperatively and 2 weeks and 3 months postoperatively were evaluated. Results: Total of 669 patients (low-TSH group, 340; high-TSH group, 329) were included. Although total HR-QoL score changes were not different between the 2 groups, the high-TSH group had a significantly higher score in the physical domain at postoperative 3 months (P = 0.046). The 2 groups did not have significant differences in hyperthyroidism and depression scores. Conclusion In the short-term postoperative period, the physical HR-QoL scores in thyroid lobectomy patients were better when they did not receive TSH suppression. This study suggests the importance of considering HR-QoL when setting TSH suppression targets in thyroid lobectomy patients.

Novel clinical trial designs are conducted in the precision medicine era. This study aimed to evaluate biomarker-driven, adaptive phase II trials in precision oncology, focusing on infrastructure, efficacy, and safety. We systematically reviewed and analyzed the target studies. EMBASE and PubMed searches from 2015 to 2023 generated 29 eligible trials. Data extraction included infrastructure, biomarker screening methodologies, efficacy, and safety profiles. Government agencies, cancer hospitals, and academic societies with accumulated experiences led investigator-initiated precision oncology clinical trials (IIPOCTs), which later guided sponsor-initiated precision oncology clinical trials (SIPOCTs). Most SIPOCTs were international studies with basket design. IIPOCTs primarily used the central laboratory for biomarker screening, but SIPOCTs used both central and local laboratories. Most of the studies adapted next-generation sequencing and/or immunohistochemistry for biomarker screening. Fifteen studies included an independent central review committee for outcome investigation. Efficacy assessments predominantly featured objective response rate as the primary endpoint, with varying results. Nine eligible studies contributed to the United States Food and Drug Administration’s marketing authorization. Safety monitoring was rigorous, but reporting formats lacked uniformity. Health-related quality of life and patient-reported outcomes were described in some protocols but rarely reported. Our results reveal that precision oncology trials with adaptive design rapidly and efficiently evaluate anticancer drugs’ efficacy and safety, particularly in specified biomarker-driven cohorts. The evolution from IIPOCT to SIPOCT has facilitated fast regulatory approval, providing valuable insights into the precision oncology landscape.

The American Joint Committee on Cancer/Union for International Cancer Control (AJCC/UICC) staging classification of thyroid cancer can predict death but cannot determine the type and frequency of follow-up testing. Risk stratification is a concept proposed by the American Thyroid Association that uses additional prognostic factors that are not included in the AJCC/UICC classification, such as number or size of metastatic lymph nodes, genetic mutations, and vascular invasion in follicular cancer, to further refine the prognosis of thyroid cancer. The risk of recurrence was categorized as low, intermediate, and high risk, and the need for total thyroidectomy, radioiodine therapy, or thyroid-stimulating hormone suppression was determined depending on each risk level. This approach has been accepted worldwide, and the previous recommendations of the Korean Thyroid Association followed a similar line of thinking but these have been modified in the revised 2024 guidelines.For the revised initial risk stratification, after careful review of the results of the recent meta-analyses and large observational studies and after a multidisciplinary meeting, four major changes were made: 1) thyroid cancer was reclassified according to the World Health Organization (WHO) 2022 tumor classification system; 2) recurrence risk was stratified by combining encapsulated follicular variant papillary thyroid cancer, follicular thyroid cancer, and oncocytic thyroid cancer, which have similar recurrence risk and associated factors, into follicular-patterned tumor; 3) low-risk groups were defined as those with a known recurrence rate of ≤5%, high-risk groups were upgraded to those with a known recurrence rate of ≥30%, and intermediate-risk groups were those with a recurrence risk of 5–30%; and 4) the intermediate risk group had the recurrence rate presented according to various clinicopathological factors, mainly based on reports from Korea. Thus, it is recommended to evaluate the initial risk group by predicting the recurrence rate by combining each clinical factor in individual patients, rather than applying the recurrence rate caused by single risk factor.

Only a small percentage of patients (2-5%) with differentiated thyroid cancer (DTC) exhibit distant metastasis at the initial diagnosis or during the disease course. The most common metastatic sites of DTC are the lungs, followed by the bones. Radioactive iodine (RAI) therapy is considered the primary treatment for RAI-avid distant metastatic DTC. Depending on the characteristics of metastatic lesions, local treatment such as surgical resection, radiofrequency ablation, and external beam radiation therapy may be considered for some patients with metastatic DTC. Slowly growing and asymptomatic metastases can be monitored with follow-up while receiving thyroid-stimulating hormone (TSH) suppression therapy. In patients with a limited number of lung metastases and good performance status, surgical removal of the metastatic lesions may be considered. Systemic therapy should be considered for patients with progressive RAI refractory DTC. In this clinical guideline, we aim to outline the treatment principles for patients with lung, bone, and brain metastases of DTC.

Differentiated thyroid cancer demonstrates a wide range of clinical presentations, from very indolent cases to those with an aggressive prognosis. Therefore, diagnosing and treating each cancer appropriately based on its risk status is important. The Korean Thyroid Association (KTA) has provided and amended the clinical guidelines for thyroid cancer management since 2007. The main changes in this revised 2024 guideline include 1) individualization of surgical extent according to pathological tests and clinical findings, 2) application of active surveillance in low-risk papillary thyroid microcarcinoma, 3) indications for minimally invasive surgery, 4) adoption of World Health Organization pathological diagnostic criteria and definition of terminology in Korean, 5) update on literature evidence of recurrence risk for initial risk stratification, 6) addition of the role of molecular testing, 7) addition of definition of initial risk stratification and targeting thyroid stimulating hormone (TSH) concentrations according to ongoing risk stratification (ORS), 8) addition of treatment of perioperative hypoparathyroidism, 9) update on systemic chemotherapy, and 10) addition of treatment for pediatric patients with thyroid cancer.

Background: Although poor oral health is a common comorbidity in individuals with airflow limitation (AFL), few studies have comprehensively evaluated this association. Furthermore, the association between oral health and the severity of AFL has not been well elucidated. Methods: Using a population-based nationwide survey, we classified individuals according to the presence or absence of AFL defined as pre-bronchodilator forced expiratory volume in 1 second/forced vital capacity < 0.7. Using multivariable logistic regression analyses, we evaluated the association between AFL severity and the number of remaining teeth; the presence of periodontitis; the Decayed, Missing, and Filled Teeth (DMFT) index; and denture wearing. Results: Among the 31,839 participants, 14% had AFL. Compared with the control group, the AFL group had a higher proportion of periodontitis (88.8% vs. 79.4%), complete denture (6.2% vs. 1.6%), and high DMFT index (37.3% vs. 27.8%) (P < 0.001 for all). In multivariable analyses, denture status: removable partial denture (adjusted odds ratio [aOR], 1.12; 95% confidence interval [95% CI], 1.04–1.20) and complete denture (aOR, 1.52; 95% CI, 1.01– 2.05), high DMFT index (aOR, 1.13; 95% CI, 1.02–1.24), and fewer permanent teeth (0–19;aOR, 1.32; 95% CI, 1.12–1.52) were significantly associated with AFL. Furthermore, those with severe to very severe AFL had a significantly higher proportion of complete denture (aOR, 2.41; 95% CI, 1.11–3.71) and fewer remaining teeth (0–19; aOR, 2.29; 95% CI, 1.57–3.01). Conclusion Denture wearing, high DMFT index, and fewer permanent teeth are significantly associated with AFL. Furthermore, a reduced number of permanent teeth (0–19) was significantly related to the severity of AFL. Therefore, physicians should pay attention to oral health in managing patients with AFL, such as chronic obstructive pulmonary disease.

Purpose: To report a modified rectangular loop suture technique for patients with refractory pupillary optic capture after intraocular lens scleral fixation. Methods: A modified rectangular loop suture was performed in four patients with persistent pupillary capture despite medication and laser iridotomy. A loop suture pattern was designed in the two quadrants without the scleral fixation knot. A 2 mm loop suture point was marked 2 mm away from the corneal limbus. The suture point was similarly marked in the opposite quadrants. Small conjunctival incisions were made at a marked point and a non-absorbable 10-0 prolene long needle was passed. The needle was inserted at the 1 o’clock position through the conjunctival incision and passed between the intraocular lens and the iris plane. Then it was withdrawn using a 26-gauge (G) syringe from the 8 o’clock position in the opposite quadrant. Similarly, the needle was passed from the 7 o’clock position under the conjunctiva, and pulled out of the sclera at the 2 o’clock position. It was then passed to the 1 o’clock position under the conjunctiva and a knot was made and buried. The operation was completed without closure of the conjunctival incision. Results: In all four eyes, pupillary optic capture was corrected and remained stable without recurrence for an average of 7.25 months. Conclusions The modified rectangular loop suture may be useful for refractory pupillary capture cases. The procedure is relatively simple and minimizes scleral exposure to the conjunctival suture. It is expected that this may reduce patient discomfort.