Objective:To block family transmission of a small fragment copy number variation (CNV) with combined 1 Mb resolution preimplantation genetic testing for aneuploidy (PGT-A) and target region preimplantation genetic testing for monogenic disease (PGT-M) strategies.Methods:A couple who attended the Reproductive and Genetic Medicine Center of Dalian Women and Children′s Medical Center (Group) in 2024 were selected as the study subject. Upon the woman′s two pregnancies, ultrasound examination revealed fetal abnormalities, and CNV-seq based on low-depth whole genome sequencing revealed that both fetuses had carried a maternal 17p12 microduplication of approximately 1.43 Mb. Microduplication in this region has been associated with Charcot-Marie-Tooth disease type 1A. In view of the fact that the resolution of conventional PGT-A detection cannot meet the requirement of small fragment CNV analysis, and conventional PGT-M assay cannot directly determine the CNV, two detection schemes were adopted. On the one hand, PGT-A testing with 1 Mb resolution was performed on the embryo to directly determine whether it carries the above microduplication. At the same time, the couple and their fetus were subjected to chromosomal typing scheme for the 17p12 region to indirectly identify embryos carrying the risk chromosome for microduplication. This study has been approved by the Medical Ethics Committee of the Hospital (Ethics No: FEJT-KY-2025-51).Results:Three embryos were tested after the first PGT cycle, of which 1 was not carrying the pathogenic variant and was euploid, whilst the other 2 embryos were carrying the 17p12 microduplication, and 1 of them was aneuploid. After genetic counseling, the euploid embryo without the 17p12 microduplication was selected for transfer, and prenatal diagnosis based on amniotic fluid sample showed that the fetal chromosomal karyotype was normal and did not carry the 17p12 microduplication.Conclusion:The combined application of high-resolution PGT-A and PGT-M typing detection of the target region can effectively block family transmission of the CNVs of small fragments.

Objective:To evaluate the mechanical stability of the bone block after LeFort Ⅰ osteotomy with maxillary advancement using absorbable plates fixed with tenon-and-mortise structures.Methods:This study developed three finite element models: one for the maxillary LeFort Ⅰ osteotomy with anterior advancement fixed with absorbable plates (Model 1); another for the maxillary LeFort Ⅰ osteotomy with anterior advancement fixed with absorbable plates assisted by tenon-and-mortise structures (Model 2); and the last one for the maxillary LeFort Ⅰ osteotomy with anterior advancement fixed with titanium plates and screws (Model 3). Simulated occlusal forces were applied on the anterior and posterior teeth in each model. The displacement changes of the nasal-palatine point (NP) and posterior nasal spine point (PNS) in the finite element coordinate system were compared and analyzed. The Mises equivalent stress distributions of the metal and absorbable plates were also examined to assess the mechanical stability of the three finite element models. Clinical data from 45 patients with dentofacial deformities treated from January 2017 to January 2023 at the Stomatology Hospital of China Medical University were collected. The age of the patients was 21±3 years. Among these, 15 patients had absorbable plates for fixation, 15 had absorbable plates assisted by tenon-and-mortise structures, and 15 had titanium plates and screws fixation after maxillary advancement. All patients underwent preoperative (T0), postoperative 3 days (T1), and 6 months (T2) spiral CT scans. The CT data in DICOM format were input into digital software, which was used to calculate the distances from the NP and PNS points to the horizontal plane (HP), right sagittal plane (FZSR), and coronal plane (CP) at T1 and T2. The distances at T1 and T2 were statistically analyzed using the Wilcoxon signed-rank test with SPSS 20.0, and a P value of<0.05 was considered statistically significant.Results:The finite element analysis showed that in the absorbable plate-only fixation group, the maximum displacement of the NP point (mm) under anterior and posterior tooth force conditions were 0.6 and 0.12, respectively, and for the PNS point, the maximum displacements were 0.5 and 0.11. In the tenon-and-mortise-assisted absorbable plate fixation group, the displacement of the NP point was 0.40 and 0.02 mm, and the displacement of the PNS point was 0.5 and 0.015 mm. In the titanium plate-screw fixation group, the NP point displacement was 0.33 and 0.055 mm, and the PNS point displacement was 0.16 and 0.1 mm. The Mises equivalent stress on the absorbable plates with tenon-and-mortise structure was significantly lower than that in the absorbable plate-only fixation group, while the titanium plate experienced the highest Mises equivalent stress. The clinical data analysis showed that in the horizontal direction, the postoperative stability of the three fixation methods was similar. However, in the vertical and anterior-posterior directions, the absorbable plate-only fixation group showed significant differences in the distances of PNS-HP, PNS-CP, and NP-CP between T1 and T2 ( P=0.018, P=0.009, P=0.017), suggesting significant postoperative bone displacement. In contrast, the tenon-and-mortise-assisted absorbable plate fixation group and the titanium plate-screw fixation group showed no significant differences in displacement during surgery and postoperatively(all P>0.05), demonstrating higher stability. Conclusions:The tenon-and-mortise-assisted absorbable plate fixation provides comparable stability to titanium plate fixation in clinical results, and it is more stable than absorbable plate-only fixation. In the mechanical study, when force was applied on the anterior teeth, the stability of the tenon-and-mortise-assisted absorbable plate fixation was slightly less than that of titanium plate fixation, but when posterior teeth were used, its stability exceeded both titanium plate fixation and absorbable plate-only fixation. The tenon-and-mortise-assisted absorbable plate fixation serves as an effective alternative to titanium plate fixation after LeFort Ⅰ osteotomy.

OBJECTIVE: To block family transmission of a small fragment copy number variation (CNV) with combined 1 Mb resolution preimplantation genetic testing for aneuploidy (PGT-A) and target region preimplantation genetic testing for monogenic disease (PGT-M) strategies. METHODS: A couple who attended the Reproductive and Genetic Medicine Center of Dalian Women and Children's Medical Center (Group) in 2024 were selected as the study subject. Upon the woman's two pregnancies, ultrasound examination revealed fetal abnormalities, and CNV-seq based on low-depth whole genome sequencing revealed that both fetuses had carried a maternal 17p12 microduplication of approximately 1.43 Mb. Microduplication in this region has been associated with Charcot-Marie-Tooth disease type 1A. In view of the fact that the resolution of conventional PGT-A detection cannot meet the requirement of small fragment CNV analysis, and conventional PGT-M assay cannot directly determine the CNV, two detection schemes were adopted. On the one hand, PGT-A testing with 1 Mb resolution was performed on the embryo to directly determine whether it carries the above microduplication. At the same time, the couple and their fetus were subjected to chromosomal typing scheme for the 17p12 region to indirectly identify embryos carrying the risk chromosome for microduplication. This study has been approved by the Medical Ethics Committee of the Hospital (Ethics No: FEJT-KY-2025-51). RESULTS: Three embryos were tested after the first PGT cycle, of which 1 was not carrying the pathogenic variant and was euploid, whilst the other 2 embryos were carrying the 17p12 microduplication, and 1 of them was aneuploid. After genetic counseling, the euploid embryo without the 17p12 microduplication was selected for transfer, and prenatal diagnosis based on amniotic fluid sample showed that the fetal chromosomal karyotype was normal and did not carry the 17p12 microduplication. CONCLUSION The combined application of high-resolution PGT-A and PGT-M typing detection of the target region can effectively block family transmission of the CNVs of small fragments.
Humans ; Female ; DNA Copy Number Variations/genetics* ; Preimplantation Diagnosis/methods* ; Pregnancy ; Pedigree ; Genetic Testing/methods* ; Male ; Adult ; Aneuploidy ; Chromosomes, Human, Pair 17/genetics* ; China ; East Asian People

Objective:To evaluate the mechanical stability of the bone block after LeFort Ⅰ osteotomy with maxillary advancement using absorbable plates fixed with tenon-and-mortise structures.Methods:This study developed three finite element models: one for the maxillary LeFort Ⅰ osteotomy with anterior advancement fixed with absorbable plates (Model 1); another for the maxillary LeFort Ⅰ osteotomy with anterior advancement fixed with absorbable plates assisted by tenon-and-mortise structures (Model 2); and the last one for the maxillary LeFort Ⅰ osteotomy with anterior advancement fixed with titanium plates and screws (Model 3). Simulated occlusal forces were applied on the anterior and posterior teeth in each model. The displacement changes of the nasal-palatine point (NP) and posterior nasal spine point (PNS) in the finite element coordinate system were compared and analyzed. The Mises equivalent stress distributions of the metal and absorbable plates were also examined to assess the mechanical stability of the three finite element models. Clinical data from 45 patients with dentofacial deformities treated from January 2017 to January 2023 at the Stomatology Hospital of China Medical University were collected. The age of the patients was 21±3 years. Among these, 15 patients had absorbable plates for fixation, 15 had absorbable plates assisted by tenon-and-mortise structures, and 15 had titanium plates and screws fixation after maxillary advancement. All patients underwent preoperative (T0), postoperative 3 days (T1), and 6 months (T2) spiral CT scans. The CT data in DICOM format were input into digital software, which was used to calculate the distances from the NP and PNS points to the horizontal plane (HP), right sagittal plane (FZSR), and coronal plane (CP) at T1 and T2. The distances at T1 and T2 were statistically analyzed using the Wilcoxon signed-rank test with SPSS 20.0, and a P value of<0.05 was considered statistically significant.Results:The finite element analysis showed that in the absorbable plate-only fixation group, the maximum displacement of the NP point (mm) under anterior and posterior tooth force conditions were 0.6 and 0.12, respectively, and for the PNS point, the maximum displacements were 0.5 and 0.11. In the tenon-and-mortise-assisted absorbable plate fixation group, the displacement of the NP point was 0.40 and 0.02 mm, and the displacement of the PNS point was 0.5 and 0.015 mm. In the titanium plate-screw fixation group, the NP point displacement was 0.33 and 0.055 mm, and the PNS point displacement was 0.16 and 0.1 mm. The Mises equivalent stress on the absorbable plates with tenon-and-mortise structure was significantly lower than that in the absorbable plate-only fixation group, while the titanium plate experienced the highest Mises equivalent stress. The clinical data analysis showed that in the horizontal direction, the postoperative stability of the three fixation methods was similar. However, in the vertical and anterior-posterior directions, the absorbable plate-only fixation group showed significant differences in the distances of PNS-HP, PNS-CP, and NP-CP between T1 and T2 ( P=0.018, P=0.009, P=0.017), suggesting significant postoperative bone displacement. In contrast, the tenon-and-mortise-assisted absorbable plate fixation group and the titanium plate-screw fixation group showed no significant differences in displacement during surgery and postoperatively(all P>0.05), demonstrating higher stability. Conclusions:The tenon-and-mortise-assisted absorbable plate fixation provides comparable stability to titanium plate fixation in clinical results, and it is more stable than absorbable plate-only fixation. In the mechanical study, when force was applied on the anterior teeth, the stability of the tenon-and-mortise-assisted absorbable plate fixation was slightly less than that of titanium plate fixation, but when posterior teeth were used, its stability exceeded both titanium plate fixation and absorbable plate-only fixation. The tenon-and-mortise-assisted absorbable plate fixation serves as an effective alternative to titanium plate fixation after LeFort Ⅰ osteotomy.

Objective:To block family transmission of a small fragment copy number variation (CNV) with combined 1 Mb resolution preimplantation genetic testing for aneuploidy (PGT-A) and target region preimplantation genetic testing for monogenic disease (PGT-M) strategies.Methods:A couple who attended the Reproductive and Genetic Medicine Center of Dalian Women and Children′s Medical Center (Group) in 2024 were selected as the study subject. Upon the woman′s two pregnancies, ultrasound examination revealed fetal abnormalities, and CNV-seq based on low-depth whole genome sequencing revealed that both fetuses had carried a maternal 17p12 microduplication of approximately 1.43 Mb. Microduplication in this region has been associated with Charcot-Marie-Tooth disease type 1A. In view of the fact that the resolution of conventional PGT-A detection cannot meet the requirement of small fragment CNV analysis, and conventional PGT-M assay cannot directly determine the CNV, two detection schemes were adopted. On the one hand, PGT-A testing with 1 Mb resolution was performed on the embryo to directly determine whether it carries the above microduplication. At the same time, the couple and their fetus were subjected to chromosomal typing scheme for the 17p12 region to indirectly identify embryos carrying the risk chromosome for microduplication. This study has been approved by the Medical Ethics Committee of the Hospital (Ethics No: FEJT-KY-2025-51).Results:Three embryos were tested after the first PGT cycle, of which 1 was not carrying the pathogenic variant and was euploid, whilst the other 2 embryos were carrying the 17p12 microduplication, and 1 of them was aneuploid. After genetic counseling, the euploid embryo without the 17p12 microduplication was selected for transfer, and prenatal diagnosis based on amniotic fluid sample showed that the fetal chromosomal karyotype was normal and did not carry the 17p12 microduplication.Conclusion:The combined application of high-resolution PGT-A and PGT-M typing detection of the target region can effectively block family transmission of the CNVs of small fragments.

Objective:To investigate the influence of combining therapy of massage on sacro-2 to sacro-4 spinal cord reflexion area and anal dilatation therapy on constipation after cerebral apoplexy and promote the rehabilitation of defecation function in patients with constipation after stroke.Methods:Aandomized controlled study method was chosen, 80 patients with constipation after cerebral apoplexy treated in Guangzhou Traditional Chinese Medicine Hospital from August 2018 to July 2019 were selected as research subjects by convenience sampling. The enrolled patients were divided into 2 groups, 40 to the observation group and 40 to the control group by random number table method. On the basis of routine constipation related nursing measures, the control group was given anal dilatation therapy, while the observation group′s treatment was given massage on sacro-2 to sacro-4 spinal cord reflexion area combined with anal dilatation therapy. Before intervention and after intervention, the changes of therapeutic effect of constipation effect, constipation symptoms scores and the degree of neurological deficit were all compared between the two groups.Results:There were 22 males and 18 females in the observation group; age ranged from 40 to 75 (63.33 ± 8.49) years old; in the control group, there were 23 males and 17 females, aged 41-74 (63.03 ± 7.60) years old. Before intervention, there was no statistically significant difference in constipation symptom scores and neurological deficits between the two groups (both P>0.05). After intervention, the score of constipation symptoms was (3.80 ± 2.05) points and the score of the degree of neurological deficit was (7.58 ± 2.69) points in the observation group, both lower than (5.18 ± 3.52) points and (8.90 ± 2.73) points in the control group with statistically significant differences between the two groups ( t values were respectively -2.13 and -2.19, both P<0.05). The total efficacy of the observation group was 97.50% (39/40), which was significantly higher than 87.50% (35/40) of the control group with statistically significant differences between the two groups ( χ2 = - 2.11, P<0.05). Conclusions:Nursing intervention of massage on sacro-2 to sacro-4 spinal cord reflexion area combined with anus dilatation therapy on constipation after cerebral apoplexy can effectively reduce the symptoms of constipation and lowered the degree of neurological deficit, which is beneficial to the functional rehabilitation of patients with cerebral apoplexy.

With various diseases ravaging internationally, the demands for recombinant adenoviral vector (Adv) vaccines have increased dramatically. To meet the demand for Adv vaccine, development of a new cell culture process is an effective strategy. Applying hyperosmotic stress in cells before virus infection could increase the yield of Adv in batch culture mode. Emerging perfusion culture can significantly increase the yield of Adv as well. Therefore, combining the hyperosmotic stress process with perfusion culture is expected to improve the yield of Adv at high cell density. In this study, a shake flask combined with a semi-perfusion culture was used as a scaled-down model for bioreactor perfusion culture. Media with osmotic pressure ranging from 300 to 405 mOsm were used to study the effect of hyperosmotic stress on cell growth and Adv production. The results showed that using a perfusion culture process with a hyperosmotic pressure medium (370 mOsm) during the cell growth phase and an isosmotic pressure medium (300 mOsm) during the virus production phase effectively increased the yield of Adv. This might be due to the increased expression of HSP70 protein during the late phases of virus replication. The Adv titer in a bioreactor with such a process reached 3.2×10¹⁰ IFU/mL, three times higher than that of the traditional perfusion culture process. More importantly, this is the first time that a strategy of combining the hyperosmotic stress process with perfusion culture is applied to the production of Adv in HEK 293 cells. It also reveals the reason why the hyperosmotic stress process increased the yield of Adv, which may facilitate the process optimization of for producing other Adv in HEK 293 cells.
Humans ; HEK293 Cells ; Genetic Vectors/genetics* ; Batch Cell Culture Techniques ; Bioreactors ; Perfusion

Objective: To discuss the efficacy of computer aided design (CAD) and computer aided manufacturing (CAM) in the treatment of microgenia by osseous genioplasty. Methods: From July 2015 to January 2018, 17 cases (Male, n=5, Female, n=12), aged from 17 to 32 years, with the meanage of 24 years, were enrolled. All patients had microgenia, and underwent osseous genioplasty. Computed tomography (CT) was performed preoperatively and 7-10 days postoperatively for all cases. Based on preoperative CT data, CAD was applied to make individualized surgical plan, surgery simulation, todetermine the movement of mentum. CAM was used to prefabricate the individualized surgical templates and transfer the CAD into intraoperative guidance. The registration of CAD and postoperative CT were performed to evaluate the surgical accuracy. Results: All patients were satisfied with the surgical outcomes. The deformity of microgenia was significantly corrected. The Pg error was (0.24±0.08) mm, and the Me error was (0.15±0.17) mm. Conclusions The application of CAD increases the accuracy of surgical planning, and CAM provides areliable guidance with individualized template. Anoptimal surgical outcome can be achieved.

We constructed bicistronic expression system containing AH6 promoter, 5' UTR and its fore 38 bp sequence from Corynebacterium glutamicum, followed by a conserved Shine-Dalgarno (SD) sequence for xylanase expression. The two major secretory pathways signal peptide in C. glutamicum, Tat (CgR0949) and Sec (CspB) dependent signal peptide were added before xylanase for its secretion. Fed-batch cultivation was done in a 5 L jar for high-level xylanase secretion. The enzyme properties of the purified xylanase were then studied, including the effect of temperature and pH on its activity. The xylanase could be secreted into the culture supernatant when the Sec-dependent signal peptide CspB was used, but none was detected when CgR0949 was used. The secretory production level of xylanase in a flask was 486.2 U/mL and become 1 648.7 U/mL when in a 5 L jar, which was 3.4 fold as in the flask. The optimal pH and temperature of xylanase were pH 4.5 and 45 ℃, respectively. Its activity was 80% of initial activity after pretreatment at 4 ℃ for 24 h at pH 4-11, 95% after incubation below 50 ℃ for 15 min, and 20% when the temperature above 60 ℃. The xylanase could be efficiently secreted into the culture medium by C. glutamicum using its own genetic elements, and the secretion level could be improved through large-scale fed-batch cultivation. This bicistronic expression system can provide a useful tool for heterologous proteins secretion in C. glutamicum. In addition, the catalyze activity of xylanase could be further improved by enzyme properties study.
Corynebacterium glutamicum ; Promoter Regions, Genetic ; Protein Sorting Signals ; Protein Transport

We constructed different N-terminal truncated variants based on Bacillus acidopullulyticus pullulanase 3D structure (PDB code 2WAN), and studied the effects of truncated mutation on soluble expression, enzymatic properties, and application in saccharification. Upon expression, the variants of X45 domain deletion existed as inclusion bodies, whereas deletion of CBM41 domain had an effective effect on soluble expression level. The variants that lack of CBM41 (M1), lack of X25 (M3), and lack both of CBM41 and X25 (M5) had the same optimal pH (5.0) and optimal temperature (60 degrees C) with the wild-type pullulanase (WT). The K(m) of M1 and M5 were 1.42 mg/mL and 1.85 mg/mL, respectively, 2.4- and 3.1-fold higher than that of the WT. k(cat)/K(m) value of M5 was 40% lower than that of the WT. Substrate specificity results show that the enzymes exhibited greater activity with the low-molecular-weight dextrin than with high-molecular-weight soluble starch. When pullulanases were added to the saccharification reaction system, the dextrose equivalent of the WT, M1, M3, and M5 were 93.6%, 94.7%, 94.5%, and93.1%, respectively. These results indicate that the deletion of CBM41 domain and/or X25 domain did not affect the practical application in starch saccharification process. Furthermore, low-molecular-weight variants facilitate the heterologous expression. Truncated variants may be more suitable for industrial production than the WT.
Bacillus ; enzymology ; Glycoside Hydrolases ; metabolism ; Molecular Weight ; Protein Conformation ; Sequence Deletion ; Substrate Specificity ; Temperature