Background Work-related musculoskeletal disorders (WMSDs), as one of the major occupational health issues worldwide, have shown an increasing positive rate year by year. Due to the unique demands of work, operating room nurses exhibit a higher positive rate of WMSDs compared to other occupational groups, necessitating active attention and intervention. Objective To estimate the prevalence of WMSDs among operating room nurses in tertiary hospitals, explore the characteristics and latent categories of WMSDs, and analyze the influencing factors associated with the occurrence of WMSDs. Method Using a randomized cluster sampling method, operating room nurses from nine tertiary hospitals in Urumqi were selected as study participants between December 2023 and January 2024. Data were collected through a general information questionnaire, an ergonomic questionnaire for operating room nurses, and the Chinese Musculoskeletal Disorders Questionnaire. Latent class analysis was employed to examine the patterns of WMSDs among the nurses, while chi-square test and multinomial logistic regression were utilized to analyze the influencing factors of WMSDs. Result A total of 411 valid questionnaires were collected in this survey. The positive rate of WMSDs among operating room nurses in the tertiary hospitals of Urumqi over the past year was 91.9%. The positive rates, ordered from highest to lowest by body region, were neck (79.1%), shoulders (70.3%), and lower back (68.1%). The operating room nurses were categorized into three distinct groups by latent class analysis: multi-site pain group, neck-shoulder-back pain group, and neck and lower back pain group. The results of the multinomial logistic regression models revealed that gender, job strain level, ergonomic load level in the operating room, and exposure to cold or drafty working conditions or not were significant influencing factors for reporting WMSDs among operating room nurses. Specifically, having less than 5 years of work experience, low ergonomic load level, low job strain, and moderate job strain were identified as protective factors against WMSDs. Conversely, exposure to cold or drafty working environments and being female were identified as risk factors for WMSDs. The logistic regression models also indicated that compared to the neck-lower back pain group, the neck-shoulder-back pain group had a higher probability of reporting low job strain (OR=0.168, 95%CI: 0.029, 0.968) and being female (OR=4.847, 95%CI: 2.506, 9.378). In contrast, when comparing to the neck-lower back pain group, the multi-site pain group had a higher probability of reporting, low-level ergonomic workload (OR=0.079, 95%CI: 0.015, 0.412), low job strain (OR=0.019, 95%CI: 0.002, 0.145), moderate job strain (OR=0.080, 95%CI: 0.016, 0.401), high job strain (OR=0.132, 95%CI: 0.027, 0.647), less than 5 years of work experience (OR=0.173, 95%CI: 0.044, 0.683), being female (OR=2.424, 95%CI: 1.130, 5.200), and exposure to cold or drafty working environments (OR=3.277, 95%CI: 1.657, 6.481). Conclusion The positive rate WMSDs among operating room nurses in tertiary hospitals is notably high in Urumqi, with distinct co-occurrence characteristics observed within the population. To mitigate the risk of WMSDs, it is essential to implement targeted health education and prevention training programs tailored to different patterns of WMSDs. Additionally, improving working conditions, optimizing human resource allocation , and other proactive measures should be undertaken. These efforts will effectively reduce the incidence of WMSDs among operating room nurses and safeguard their occupational health.

ObjectiveTo study the effect of Bufei Tongbi decoction on pulmonary fibrosis in diabetic rats via the transforming growth factor-β₁ （TGF-β₁）/phosphorylated Smad family member 3 （p-Smad3） signaling pathway. MethodsStreptozotocin （60 mg·kg^-1） and bleomycin （24.80 U·kg^-1） were used to prepare the rat model of diabetes with pulmonary fibrosis by intratracheal injection. Sixty rats were randomly assigned into blank， model， low-， medium-， and high-dose （3.98， 7.95， and 15.90 g·kg^-1， respectively） Bufei Tongbi decoction， and pirfenidone （0.36 mg·kg^-1） groups （n=10）. The successfully modeled rats in each group were administrated with corresponding agents once per day for four consecutive weeks. After drug administration， fasting blood glucose and lung function indicators were measured. Chemical immunoassay was employed to determine the serum levels of hydroxyproline （Hyp）， hyaluronic acid （HA）， and laminin （LN）. The lung index was determined by the wet and dry methods. The pathological changes in the lung tissue were observed by hematoxylin-eosin （HE） staining， and the degree of fibrosis was detected by Masson staining. The mRNA and protein levels of TGF-β₁， p-Smad3， Smad3， α-smooth muscle actin （α-SMA）， collagen type Ⅰ alpha 1 （Col1A1）， and fibronectin were determined by PCR and Western blotting， respectively. ResultsCompared with the blank group， the model group showed alveolar septa thickening， obvious thickening of the basement membrane of pulmonary blood vessels， severe destruction of the alveolar structure， structural disarrangement of the lung parenchyma， and an increase in the proportion of inflammatory cell infiltration in the lung tissue， together with a large amount of blue collagen deposition and a large amount of collagen fibroplasia in the bronchial wall， vessel wall， interstitium， and alveolar wall， which indicated severe fibrosis. Bufei Tongbi decoction groups and the pirfenidone group showed lower fasting blood glucose level （P<0.05） and higher forced vital capacity （FVC）， cytoplasmic dynein （Cydn）， FEV_0.3/FEV ratio， and lung index （P<0.05） than the model group. Moreover， these groups demonstrated alleviated lung fibrosis， elevated Hyp， HA， and LN levels， down-regulated mRNA levels of α-SMA， Col1A1， and fibronectin， and down-regulated protein levels of TGF-β₁， Smad3， p-Smad3， α-SMA， Col1A1， and fibronectin （P<0.05）. ConclusionBufei Tongbi decoction can inhibit pulmonary fibrosis in diabetic rats by inhibiting the TGF-β₁/p-Smad3 signaling pathway.

ObjectiveThis study leverages structural data from antigen-antibody complexes of the influenza A virus neuraminidase (NA) protein to investigate the spatial recognition relationship between the antigenic epitopes and antibody paratopes. MethodsStructural data on NA protein antigen-antibody complexes were comprehensively collected from the SAbDab database, and processed to obtain the amino acid sequences and spatial distribution information on antigenic epitopes and corresponding antibody paratopes. Statistical analysis was conducted on the antibody sequences, frequency of use of genes, amino acid preferences, and the lengths of complementarity determining regions (CDR). Epitope hotspots for antibody binding were analyzed, and the spatial structural similarity of antibody paratopes was calculated and subjected to clustering, which allowed for a comprehensively exploration of the spatial recognition relationship between antigenic epitopes and antibodies. The specificity of antibodies targeting different antigenic epitope clusters was further validated through bio-layer interferometry (BLI) experiments. ResultsThe collected data revealed that the antigen-antibody complex structure data of influenza A virus NA protein in SAbDab database were mainly from H3N2, H7N9 and H1N1 subtypes. The hotspot regions of antigen epitopes were primarily located around the catalytic active site. The antibodies used for structural analysis were primarily derived from human and murine sources. Among murine antibodies, the most frequently used V-J gene combination was IGHV1-12*01/IGHJ2*01, while for human antibodies, the most common combination was IGHV1-69*01/IGHJ6*01. There were significant differences in the lengths and usage preferences of heavy chain CDR amino acids between antibodies that bind within the catalytic active site and those that bind to regions outside the catalytic active site. The results revealed that structurally similar antibodies could recognize the same epitopes, indicating a specific spatial recognition between antibody and antigen epitopes. Structural overlap in the binding regions was observed for antibodies with similar paratope structures, and the competitive binding of these antibodies to the epitope was confirmed through BLI experiments. ConclusionThe antigen epitopes of NA protein mainly ditributed around the catalytic active site and its surrounding loops. Spatial complementarity and electrostatic interactions play crucial roles in the recognition and binding of antibodies to antigenic epitopes in the catalytic region. There existed a spatial recognition relationship between antigens and antibodies that was independent of the uniqueness of antibody sequences, which means that antibodies with different sequences could potentially form similar local spatial structures and recognize the same epitopes.

Objective To develop the "Questionnaires on the Knowledge, Attitudes, and Practices of College Students in Response to Public Health Emergencies" and validate its reliability and validity. Methods The initial questionnaire was developed according to literature review, expert consultations, and one-on-one interviews with students and educators. A total of 43 college students were selected as the pre-test subjects using the convenience sampling method. The final version of the questionnaire was developed using item analysis and expert consultations. A total of 682 college students were selected as the validation subjects using the cluster sampling method. The exploratory factor analysis and confirmatory factor analysis were used to assess the reliability and validity of the questionnaire. Results The final version of the questionnaire consisted of three dimensions: knowledge, practice, and attitude, with 5, 10, 7 items, respectively. The KMO test value for the questionnaire was 0.804, with Bartlett′s test of sphericity showing a chi-square value of 2 000.557 (P<0.01). The content validity index for each item ranged from 0.894 to 1.000, with the overall content validity index for the questionnaire being 0.966 and 0.973. The exploratory factor analysis identified three common factors, with a cumulative variance contribution rate of 54.1%. The result of confirmatory factor analysis showed good model fit, with model fit index, comparative fit index, normed fit index, incremental fit index, Tucker-Lewis Index, root mean square error of approximation of 2.960, 0.930, 0.940, 0.930, 0.950 and 0.070, respectively. The Cronbach's α coefficient for the questionnaire was 0.772, split-half reliability was 0.604, and test-retest reliability was 0.905. Conclusion The "Questionnaires on the Knowledge, Attitudes, and Practices of College Students in Response to Public Health Emergencies" demonstrates good reliability, and it is suitable for widespread application.

ObjectiveTo observe the clinical efficacy and safety of hot ironing with Haitongpi Formula （海桐皮方， HF） in the treatment of lumbar disc herniation （LDH） of cold-dampness obstruction type. MethodsA total of 70 patients with cold-dampness obstruction type LDH were randomly divided into a treatment group and a control group， with 35 cases in each group. Both groups received three movements technique of Qinggong Spinal Manipulation （QSM） as the basis for treatment. In addition， the treatment group received hot ironing with HF， while the control group applied Diclofenac Sodium Gel externally. The treatment duration for both groups was 14 days. The clinical efficacy was compared between groups. Japanese Orthopedic Association （JOA） score， visual analog scale （VAS） for pain， pain pressure threshold （PPT） for lumbar positive response points， and traditional Chinese medicine （TCM） symptom scores were compared， on day 7， and day 14 of treatment， as well as on day 7 and day 14 of follow-up. The lumbar curvature index （LCI） was also compared before treatment and on day 14 of treatment. Adverse reactions during the study were recorded for both groups. ResultsA total of 35 patients in the treatment group and 34 patients in the control group were included for final analysis. The clinical total effective rate of the treatment group （91.43%， 32/35） was significantly higher than that of the control group （82.35%， 28/34， P＜0.05）. Both the JOA score and PPT of the two groups increased on day 7 and day 14 of treatment， and on day 7 and day 14 of follow-up. VAS scores and TCM symptom scores both decreased. The LCI of both groups increased on day 14 of treatment （P＜0.01）. Compared with the control group at the same time points， on day 14 of treatment and day 7 and day 14 of follow-up， the treatment group had higher JOA scores and PPT， and lower VAS scores and TCM symptom scores. The LCI of the treatment group increased on day 14 of treatment （P＜0.05 or P＜0.01）. One case in the control group showed mild skin allergy， with no other adverse reactions observed in either group. ConclusionBased on three movements technique of QSM， hot ironing with HF shows better clinical efficacy than external Diclofenac Sodium Gel in the treatment of cold-dampness obstruction type LDH. It can significantly reduce lumbar pain， increase pain pressure threshold， improve clinical symptoms， lumbar function， and lumbar curvature， with good safety.

ObjectiveTo observe the clinical efficacy and safety of Modified Guomin Decoction （加味过敏煎， MGD） in patients with mild to moderate atopic dermatitis （AD） of the traditional Chinese medicine （TCM） pattern of heart fire and spleen deficiency， and to explore its possible mechanisms. MethodsIn this randomized， double-blind， placebo-controlled study， 72 patients with mild to moderate AD and the TCM pattern of heart fire and spleen deficiency were randomly divided into a treatment group and a control group， with 36 cases in each group. The treatment group received oral MGD granules combined with topical vitamin E emulsion， while the control group received oral placebo granules combined with topical vitamin E treatment. Both groups were treated twice daily for 4 weeks. Clinical efficacy， TCM syndrome scores， Visual Analogue Scale （VAS） for pruritus， Dermatology Life Quality Index （DLQI） scores， Scoring Atopic Dermatitis （SCORAD） and serum biomarkers， including interleukin-33 （IL-33）， interleukin-1β （IL-1β）， immunoglobulin E （IgE）， and tumor necrosis factor-α （TNF-α） were compared before and after treatment. Safety indexes was also assessed. ResultsThe total clinical effective rates were 77.78% （28/36） in the treatment group and 38.89% （14/36） in the control group， with cure rates of 19.44% （7/36） and 2.78% （1/36）， respectively. The treatment group showed significantly better clinical outcomes compared to the control group （P＜0.05）. The treatment group exhibited significant reductions in total TCM syndrome scores， including erythema， edema， papules， scaling， lichenification， pruritus， irritability， insomnia， abdominal distension， and fatigue scores， as well as reductions in VAS， DLQI， SCORAD， and serum IgE and IL-33 levels （P＜0.05 or P＜0.01）. Compared to the control group， the treatment group had significantly better improvements in all indicators except for insomnia （P＜0.05）. No adverse events occurred in either group. ConclusionMGD is effective and safe in treating mild to moderate AD patients with heart fire and spleen deficiency pattern. It significantly alleviates pruritus， improves TCM syndromes and quality of life， and enhances clinical efficacy， possibly through modulation of immune responses.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.