Objective: To understand the microclimate in primary and secondary school classrooms for the study period during the winter heating season, so as to provide a reference for the revision and improvement of relevant health standards. Methods: In December 2024, stratified random sampling was used to select 30 primary and secondary schools and 180 classrooms from the northern regions with centralized heating (Liaoning Province, Tianjin City) and the southern regions without centralized heating (Shanghai City, Anhui Province, and Jiangxi Province). Indoor temperature, relative humidity, wind speed, CO 2 and other indicators were measured on site. Variance analysis, t-test, Mann-Whitney U test and Kruskal-Wallis H test were used to analyze the differences in the microclimate of classrooms among regions and urban and rural differences. Results: The average temperature in the middle of the classrooms tested on site was (16.47±4.72)℃, and the variance analysis showed that the difference between the regions was statistically significant ( F=27.80, P <0.01). Among them, Tianjin had the highest average temperature of (20.43± 2.12 )℃, followed by Liaoning (19.03±2.23)℃, Shanghai (15.33±5.32)℃, Anhui (12.79±1.74)℃, and Jiangxi (11.69± 1.68 )℃. Horizontal temperature difference was 0.90 (0.50, 1.60)℃, the vertical temperature difference was 0.20 (0.10,0.60)℃, the average relative humidity was (44.39±16.16)%, the wind speed was 0.03(0.01,0.11)m/s, and the differences among different provinces and cities were statistically significant ( H/F =40.62, 82.69, 95.06, 55.28, all P <0.01). The average CO 2 volume concentration in urban areas of Tianjin, Liaoning, and Shanghai was 0.21(0.16,0.30)%, and there was no statistically significant difference ( H=4.65, P =0.10). There were grade differences in relative humidity ( F =3.71, 6.21) and CO 2 ( H =14.72, 12.92) in the north and the south (all P <0.05). In addition, the temperature, relative humidity, wind speed and CO 2 in the middle of the classroom were 42.8%, 67.8%, 100.0% and 22.2% respectively. Conclusions The temperature in the middle of the classroom in the non centralized heating area is lower than the standard, the relative humidity of classroom in the centralized heating area is lower than the standard，and the CO 2 in the classroom in winter is lower than the standard. It is recommended to install heating facilities in schools with low temperatures to increase the temperature and increase the frequency of ventilation in classrooms or adopt mechanical ventilation strategies to reduce CO 2 volume concentration.

Objective: To evaluate the classroom environmental management and CO 2 volume concentration in primary and secondary schools from Liaoning, Tianjin, and Shanghai, thereby providing a scientific basis for developing targeted strategies to improve classroom air quality. Methods: From December 16 to 26, 2024, by using stratified random cluster sampling method, the questionnaire survey was conducted in 72 primary and secondary schools (24 each of primary, junior high, and regular high schools) across Liaoning, Tianjin and Shanghai. Information on heating, ventilation and other classroom environmental management was collected. Additionally, 108 classrooms were selected for on site microclimate measurements, including temperature, humidity, wind speed and CO 2 volume concentration. Univariate analysis and multiple linear regression models were employed to explore related factors of classroom CO 2 volume concentration. Results: Among the three provinces/municipalities, 20.8% of schools regularly monitored the microclimate. The overall compliance rate for classroom CO 2 volume concentration was 17.6%. Multiple linear regression analysis showed that CO 2 volume concentration in regular and junior high school classrooms were higher than in primary school classrooms ( β=0.067, 0.046, 95%CI =0.036-0.099, 0.013-0.080); classrooms ventilated regularly in the morning and afternoon had higher CO 2 volume concentration than those ventilated during every break between classes ( β=0.043, 95%CI = 0.007- 0.080); both temperature ( β=0.010, 95%CI =0.004-0.016) and humidity ( β=0.003, 95%CI =0.002-0.004) were positively correlated with CO 2 volume concentration (all P <0.05). Conclusions Excessive CO 2 volume concentration in primary and secondary school classrooms is a prominent issue, and ventilation frequency is a key intervenable factor for controlling CO 2 levels. It is recommended to promote ventilation during every break between classes as a core management measure and to emphasize air quality supervision in regular high school classrooms.

Objective: To evaluate the current situation of thermal environment in primary and secondary school classrooms during winter, and to analyze students thermal comfort needs, so as to provide a basis for improving classroom thermal environment. Methods: From December 16 to 26, 2024, a stratified cluster random sampling method was used to select 90 classrooms from 15 primary and secondary schools in centralized/air conditioned heating areas(Liaoning Province, Tianjin City, Shanghai City) and naturally ventilated areas(Anhui Province and Jiangxi Province)for on site environmental measurement. A questionnaire survey was conducted among 743 students. The differences between groups using the χ 2 test were compared. Based on actual measurement data, a predicted mean vote prepared percentage of dissatisfied (PMV-PPD) model for centralized/air conditioned classrooms and an adaptive model for naturally ventilated classrooms were established, and the thermal neutral temperature and comfort interval were calculated. Results: The average outdoor temperature during on site measurement was 4.00(0.20，7.00)℃. In classrooms with centralized or air conditioned heating systems, the measured average temperature was (19.33±2.59)℃, with a thermal comfort range of 20.35-25.35 ℃ and a thermal neutral temperature of 22.85 ℃. And 13.92% of students reported feeling cold, while 80.80% felt comfortable. In classrooms with natural ventilation, the measured average temperature was (12.26±1.83)℃, with a thermal neutral temperature of 19.67 ℃ and a thermal comfort range of 16.17-23.17 ℃. About 48.33% of students reported feeling cold, and 49.81 % felt comfortable.The results of univariate analysis showed that there were statistically significant differences in shoe thickness, temperature sensation, relative humidity sensation and wind speed sensation between centralized/air conditioned heating areas ( χ 2= 7.01 , 31.47, 13.57, 13.80,all P <0.05). There were also statistically significant differences in school stage for primary and secondary school students, body mass index, classroom location for seat, temperature sensation, relative humidity sensation and wind speed sensation between naturally ventilated areas ( χ 2=42.13, 11.13, 11.04, 60.39, 29.27, 38.46,all P <0.05). Conclusions There are differences in thermal environment and students subjective thermal comfort in primary and secondary schools under different ventilation modes in winter. The temperature standards for heated classrooms should be revised, and differentiated environmental regulation strategies should be adopted based on different ventilation methods to improve students health and comfort levels.

This article systematically reviews and examines the historical evolution of Bambusae Succus as a medicinal material， covering aspects such as nomenclature， origin， geographical distribution， harvesting and processing methods， quality assessment， therapeutic effects and indications， by consulting ancient herbal texts， medical compendia， and modern literature. The aim is to provide a reference for the development and utilization of famous classical formulas containing this herb. Research indicated that Bambusae Succus was first documented in the Shennong Bencaojing during the Han dynasty， with Zhuli being the standard name used throughout history， alongside aliases like Zhuzhi， Zhuyou and Huoquan. Historically， the primary source of Bambusae Succus has been Phyllostachys nigra var. henonis（Danzhu）， although other species such as Pleioblastus amarus and Bambusa emeiensis have also been used medicinally. Ancient records predominantly noted its origin in Yizhou（present-day Chengdu and surrounding areas in Sichuan） and the Wuling region（between present-day Hunan， Guangdong， Guangxi and Jiangxi provinces）， while contemporary sources are mainly from regions south of the Yangtze River and southwestern China. Traditionally， Bambusae Succus was harvested from bamboo that had grown for exactly one year， today， it can be collected year-round without strict age requirements. Ancient preparation methods included direct fire roasting or dry distillation， whereas modern industrial production employs dry distillation， reflux extraction， and percolation. In terms of quality evaluation， ancient texts considered a sweet taste to be superior， while today， clarity and transparency are prioritized. Historically， Bambusae Succus was characterized as sweet and cold nature， targeting the lung and stomach meridians， with uses evolving from clearing heat and resolving phlegm to nourishing Yin， moistening dryness， and relaxing tendons and unblocking meridians. Modern descriptions classify it as sweet， bitter， and cold in nature， affecting the heart， liver， and lung meridians， with functions including clearing heat， resolving phlegm， and facilitating orifices. It is indicated for conditions such as stroke with phlegm confusion， lung heat with phlegm congestion， convulsions， epilepsy， excessive phlegm in febrile diseases， high fever with thirst， irritability during pregnancy， and tetanus， with more clearly defined applications. Based on the results of the research， it is recommended that when developing and utilizing famous classical formulas containing Bambusae Succus， the one-year-old Phyllostachys nigra var. Henonis， which has been highly praised throughout history， should be selected as the source material. Industrial production should adopt the dry distillation method. Furthermore， in-depth research should be conducted on the modern technological characterization of the traditional quality control indicator of sweet taste， and reasonable modern quality control standards should be established.

The prescription of Qidong Yixin oral liquid is derived from the experience of national medical master Ren Jixue in treating viral myocarditis （VMC）. It has the functions of tonifying Qi， nourishing the heart，calming the mind， and relieving palpitations. It is used to treat VMC and angina pectoris of coronary heart disease caused by deficiency of both Qi and Yin. However，the understanding of its efficacy evidence， advantageous aspects， dosage and administration， and medication safety remains insufficient in clinical practice. Therefore，the development of the Expert Consensus on the Clinical Application of Qidong Yixin Oral Liquid （hereinafter referred to as consensus） was initiated. Consensus strictly followed the process and methods of the expert consensus on the clinical application of Chinese patent medicines of the China Association of Chinese Medicine，successively completing multiple tasks such as the consensus project initiation，determination of clinical problems，evidence search and evaluation，formation of recommendation opinions and consensus suggestions，solicitation of opinions，peer review， submission for review and release， and so on. Consensus formed a total of 10 recommendation opinions and 12 consensus suggestions，clarifying the clinical positioning，efficacy advantages，syndrome differentiation，dosage and administration，combination therapy，timing of medication，adverse reactions，contraindications， and precautions of Qidong Yixin oral liquid，indicating that it has good clinical advantages and safety in the treatment of VMC and angina pectoris of coronary heart disease，providing norms and references for physicians to safely and rationally apply Qidong Yixin oral liquid. Consensus was reviewed and approved for release by the Standardization Office of the China Association of Chinese Medicine on December 23， 2024. Standard number：GSCACM-376-2024.

Abstract The study examines the development and application of microclimate standards for primary and secondary school classrooms, so as to ensure and promote the healthy growth of primary and secondary school students. The paper systematically reviews relevant domestic and international standards, analyzes the problems and shortcomings arising from their practical application and proposes effective countermeasures, in order to provide robust references aimed at optimizing the classroom environment in primary and secondary schools for student health, as well as offering practical support to advance the construction of a healthy China.

ObjectiveProtein-protein interactions (PPIs) are fundamental to the execution of biological functions within living cells. However, traditional biochemical methods, such as co-immunoprecipitation (Co-IP), often fail to capture transient, weak, or membrane-associated interactions due to the stringent detergent requirements for cell lysis. Proximity labeling (PL) has emerged in recent years as a transformative technology for mapping the proteomes of specific subcellular compartments and identifying dynamic interactomes in situ. Golgi protein 73 (GP73, also known as GOLPH2), a resident type II Golgi transmembrane protein, is a well-recognized clinical biomarker for liver diseases, including hepatocellular carcinoma (HCC). Despite its clinical significance, the comprehensive physiological and pathological functions of GP73 remain partially understood. This study aims to establish an APEX2-mediated proximity labeling system specifically targeting GP73 to map its interactome in a living cellular environment, thereby providing new insights into its molecular roles and regulatory mechanisms. MethodsTo achieve spatial specificity, we first constructed a stable cell line expressing a fusion protein consisting of GP73 and the engineered soybean peroxidase APEX2. The localization of the GP73-APEX2 fusion protein was validated to ensure it correctly targeted the Golgi apparatus. The proximity labeling reaction was initiated by incubating the cells with biotin-phenol (BP) for 30 min, followed by a brief (1 min) treatment with1 mmol/L hydrogen peroxide (H₂O₂). This catalytic reaction converts BP into highly reactive, short-lived biotin-phenoxyl radicals that covalently attach to endogenous proteins within a small labeling radius of the GP73-APEX2 enzyme. Subsequently, the cells were quenched, and biotinylated proteins were enriched using high-affinity streptavidin-coated magnetic beads. The captured “neighbor” proteins were subjected to on-bead digestion and analyzed via liquid chromatography-tandem mass spectrometry (LC-MS/MS) for high-throughput identification. Rigorous bioinformatics analysis, including Gene Ontology (GO) enrichment, Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis, and protein-protein interaction network mapping, was performed to interpret the biological significance of the identified candidates. ResultsOur results demonstrate the successful establishment of a robust and sensitive APEX2-based proximity labeling system for GP73. We identified a total of 95 high-confidence interacting proteins that were significantly enriched in the GP73 proximity proteome compared to control groups. Bioinformatics analysis revealed that these interactors were predominantly associated with biological processes such as vesicular transport, protein localization, and, most notably, molecular functions related to “ribosome binding” and “translation regulation”. This suggested an unexpected role for the Golgi-resident GP73 in the cellular translation machinery. To validate these findings, we performed targeted biochemical assays which confirmed a direct interaction between GP73 and the subunits of the eukaryotic translation initiation factor 3 (eIF3) complex, specifically EIF3G and EIF3I. Furthermore, functional validation using the surface sensing of translation (SUnSET) assay—a non-radioactive method to monitor protein synthesis—revealed that the overexpression of GP73 significantly promoted global protein translation levels in the cell, whereas its depletion or inhibition resulted in reduced translation efficiency. ConclusionThis study successfully utilized APEX2-mediated proximity labeling to provide the first systematic map of GP73 interactome in living cells. Our findings uncover a novel, unconventional function of GP73 as a regulator of cellular protein translation, likely mediated through its interaction with the eIF3 complex. This discovery significantly broadens our understanding of the biological roles of GP73 beyond its traditional function in the Golgi apparatus and suggests that it may act as a bridge between Golgi-related trafficking and the protein synthesis machinery. Furthermore, the technical framework established in this study provides a valuable template for investigating other complex organelle-associated protein networks and resolving transient macromolecular interactions in various physiological and pathological contexts.

ObjectiveTo observe the clinical efficacy and radiographic outcomes of manipulative reduction combined with small splint fixation in the treatment of distal radius fractures. MethodsThe clinical data of 1051 patients with distal radius fractures were retrospectively collected from five hospitals included in the Jiangsu Diagnosis and Treatment Data Platform for Traditional Chinese Medicine（TCM） Dominant Diseases. Propensity score matching at a 1∶4 ratio was applied， resulting in 580 cases selected for final analysis， which comprised 448 patients in the TCM group（manipulative reduction plus small splint fixation） and 132 in the surgical treatment group（open reduction and internal fixation）. Each group was further stratified into type A， B， and C subgroups based on AO fracture classification. Radiographic indicators including palmar tilt， radial inclination， and radial height were compared between groups before treatment and 1 day， 1 week， and 4-6 weeks after treatment， and pain visual analog scale（VAS） scores before treatment and 1 week and 4-6 weeks after treatment were also compared. Wrist joint function was assessed 12 weeks after treatment， using the Dienst wrist function score and the Gartland and Werley（G-W） wrist function score. Additionally， the radiographic indicators at different timepoints and the 12-week wrist function levels were compared between groups across different fracture types. ResultsNo statistically significant difference was observed in radiographic indicators and VAS scores at all timepoints before and after treatment， as well as wrist joint function grades assessed by the Dienst score and the G-W score at 12 weeks after treatment （P＞0.05）. Compared to those before treatment， both groups showed increased palmar tilt， radial inclination， and radial height 1 week and 4-6 weeks after treatment， and decreased VAS scores （P＜0.05）. Compared to those 1 week after treatment， both groups showed a decrease in palmar tilt， an increase in radial inclination and radial height， and a reduction in VAS score 4-6 weeks after treatment（P＜0.05）. In type A and B subgroups， the surgical treatment group had a higher radial inclination than the TCM group 4-6 weeks after treatment， while in the type C subgroup， a higher radial height was shown in the surgical treatment group than in the TCM group 4-6 weeks after treatment（P＜0.05）. In type C subgroup， there was significant difference between groups in the wrist joint function by G-W scores 12 weeks after treatment（P＜0.05）. ConclusionManipulative reduction combined with small splint fixation can maintain fracture alignment and alleviate pain in treating distal radius fractures， which achieves therapeutic outcomes comparable to surgical treatment. It is particularly suitable for type A and B fractures and can be considered an effective treatment option for distal radius fractures.

ObjectiveThis study aimed to investigate the anti-Mycoplasma pneumoniae (MP) activity of luteolin and elucidate its underlying mechanisms. MethodsLuteolin was identified as the primary active compound from the polyphenol extract ofF. diotrys using network pharmacology. Its efficacy was evaluated against two MP strains: the standard strain M129 and the multidrug-resistant strain M19. A modified culture medium with visual characteristics was employed to determine the minimum inhibitory concentration (MIC) of luteolin. The expression of key proteins involved in MP growth and pathogenicity was assessed by qRT-PCR following luteolin treatment. Additionally, the viability of A549 cells infected with MP was compared between luteolin-treated and untreated groups. In vivo anti-MP activity was evaluated using a mouse model, and the expression of inflammatory cytokines in lung tissues was analyzed. ResultsLuteolin effectively inhibited both MP strains, with MIC₉₀ values of 100 mg/L for M19 and M129. Treatment with luteolin significantly downregulated the expression of adhesion proteins P1 and P30 in both strains. However, the expression of P65, HMW3, TrmB, and CARDS TX was reduced only in the M19 strain following luteolin intervention. Luteolin also enhanced the growth and viability of A549 cells infected with MP. In the mouse model, luteolin treatment resulted in steady weight gain and was well tolerated. The bacteriostatic rate of luteolin in lung tissues was 50.7%, significantly higher than the 25.2% observed in the roxithromycin group. Furthermore, luteolin reduced the expression of inflammatory factors, including IL-6, TNF-α, and HMGB1, in MP-infected mice. ConclusionLuteolin effectively and safely inhibits the proliferation and pathogenicity of MP, particularly the drug-resistant M19 strain, by downregulating the expression of toxicity-associated proteins (P1, P30, P65, HMW3, TrmB, CARDS TX) and modulating host inflammatory responses. These findings suggest that luteolin may offer a novel therapeutic strategy for treating MP infections, especially those caused by drug-resistant strains.

ObjectiveThis study aimed to investigate the anti-Mycoplasma pneumoniae (MP) activity of luteolin and elucidate its underlying mechanisms. MethodsLuteolin was identified as the primary active compound from the polyphenol extract ofF. diotrys using network pharmacology. Its efficacy was evaluated against two MP strains: the standard strain M129 and the multidrug-resistant strain M19. A modified culture medium with visual characteristics was employed to determine the minimum inhibitory concentration (MIC) of luteolin. The expression of key proteins involved in MP growth and pathogenicity was assessed by qRT-PCR following luteolin treatment. Additionally, the viability of A549 cells infected with MP was compared between luteolin-treated and untreated groups. In vivo anti-MP activity was evaluated using a mouse model, and the expression of inflammatory cytokines in lung tissues was analyzed. ResultsLuteolin effectively inhibited both MP strains, with MIC₉₀ values of 100 mg/L for M19 and M129. Treatment with luteolin significantly downregulated the expression of adhesion proteins P1 and P30 in both strains. However, the expression of P65, HMW3, TrmB, and CARDS TX was reduced only in the M19 strain following luteolin intervention. Luteolin also enhanced the growth and viability of A549 cells infected with MP. In the mouse model, luteolin treatment resulted in steady weight gain and was well tolerated. The bacteriostatic rate of luteolin in lung tissues was 50.7%, significantly higher than the 25.2% observed in the roxithromycin group. Furthermore, luteolin reduced the expression of inflammatory factors, including IL-6, TNF-α, and HMGB1, in MP-infected mice. ConclusionLuteolin effectively and safely inhibits the proliferation and pathogenicity of MP, particularly the drug-resistant M19 strain, by downregulating the expression of toxicity-associated proteins (P1, P30, P65, HMW3, TrmB, CARDS TX) and modulating host inflammatory responses. These findings suggest that luteolin may offer a novel therapeutic strategy for treating MP infections, especially those caused by drug-resistant strains.