Objective: To explore the effect of YTH domain family protein 1(YTHDF1) on the activation, proliferation and migration of hepatic stellate cells(HSCs) by regulating mitochondrial fission mediated by mitochondrial fission protein 1(Fis1). Methods: The mouse hepatic stellate cell line JS-1 was treated with 5 ng/ml TGF-β1 for 24 h to induce its activation and proliferation, andYTHDF1-siRNA was used to construct aYTHDF1silencing model.The experiment was divided into Control group, TGF-β1 group, TGF-β1+si-NC group and TGF-β1+si-YTHDF1 group.Expression changes ofYTHDF1,Fis1and key indicators of fibrosis, type Ⅰ collagen(CollagenⅠ) and α-smooth muscle actin(α-SMA) were detected through reverse transcription quantitative polymerase chain reaction(RT-qPCR) and Western blot; CCK-8 was used to detect cell proliferation ability; Transwell migration assay and cell scratch assay were used to detect cell migration ability; immunofluorescence staining experiment was used to detect the effect ofYTHDF1onFis1-mediated mitochondrial fission; finally, JC-1 staining was used to experimentally detect the effect ofYTHDF1on mitochondrial membrane potential. Results: Compared with the Control group, RT-qPCR and Western blot experimental results showed that the expression ofYTHDF1andFis1increased in the TGF-β1 group(P<0.05,P<0.01;P<0.000 1), as well as the fibrosis markersCollagenⅠand the expression level of α-SMA increased(P<0.01;P<0.001,P<0.000 1); while adding CCK-8, the experimental results showed that the proliferation ability of HSCs in the TGF-β1 group was enhanced(P<0.000 1); Transwell experimental results showed that the migration ability of HSCs in the TGF-β1 group was enhanced(P<0.01); the cell scratch experiment results showed that the migration ability of HSCs in the TGF-β1 group was enhanced(P<0.000 1); the immunofluorescence experiment results showed that the TGF-β1 group Mito-Tracker Red staining andFis1co-localization signal increased(P<0.05); JC-1 staining experiment results showed that the mitochondrial membrane potential increased in the TGF-β1 group(P<0.01). Compared with the TGF-β1+si-NC group, RT-qPCR and Western blot experimental results showed that the expression ofYTHDF1andFis1in the TGF-β1+si-YTHDF1 group was reduced(P<0.01;P<0.001), and fibrosis markers the levels ofCollagenⅠandα-SMAwere reduced(P<0.01;P<0.001,P<0.01).CCK-8 experimental results showed that the proliferation ability of HSCs in the TGF-β1+si-YTHDF1 group was weakened(P<0.000 1); Transwell experiment results showed that the migration ability of HSCs in the TGF-β1+si-YTHDF1 group was weakened(P<0.001); cell scratch experiment results showed that the migration ability of HSCs in the TGF-β1+si-YTHDF1 group was weakened(P<0.000 1); immunofluorescence experiment results showed that the Mito-Tracker Red staining andFis1co-localization signal decreased in the TGF-β1+si-YTHDF1 group(P<0.01); JC-1 staining experiment results showed that mitochondrial membrane potential decreased in the TGF-β1+si-YTHDF1 group(P<0.05). Conclusion YTHDF1promotes the activation, proliferation and migration capabilities of HSCs by positively regulatingFis1-mediated mitochondrial fission. This suggests thatYTHDF1may be a key gene involved in regulating the activation, proliferation and migration of HSCs.

With the continuous development of society, a large number of new chemicals are continuously emerging, which presents a challenge to current risk assessment and safety management of chemicals. Traditional toxicology research methods have certain limitations in quickly, efficiently, and accurately assessing the toxicity of many chemicals, and cannot meet the actual needs. In response to this challenge, computational toxicology that use mathematical and computer models to achieve the prediction of chemical toxicity has emerged. In the meantime, as researchers increasingly pay attention to understanding the interaction mechanisms between exogenous chemical substances and the body from the system level, and multiomics technologies develop rapidly such as genomics, transcriptomics, proteomics, and metabolomics, huge amounts of data have been generated, providing rich information resources for studying the interactions between chemical substances and biological molecules. System toxicology and network toxicology have also developed accordingly. Of these, network toxicology can integrate these multiomics data to construct biomolecular networks, and then quickly predict the key toxicological targets and pathways of chemicals at the molecular level. This paper outlined the concept and development of network toxicology, summarized the main methods and supporting tools of network toxicology research, expounded the application status of network toxicology in studying potential toxicity of exogenous chemicals such as agricultural chemicals, environmental pollutants, industrial chemicals, and foodborne chemicals, and analyzed the development prospects and limitations of network toxicology research. This paper aimed to provide a reference for the application of network toxicology in other fields.

In order to further standardize the vaccination of kidney transplant candidates and recipients in China, the Branch of Organ Transplantation of Chinese Medical Association has organized experts in kidney transplantation and infectious diseases. Based on the "Vaccination of Solid Organ Transplant Candidates and Recipients: Guidelines from the American Society of Transplantation Infectious Diseases Community of Practice", and in combination with the clinical reality of infectious diseases and vaccination after organ transplantation in China, as well as referring to relevant recommendations from home and abroad in recent years, these guidelines are formulated from aspects such as epidemiology, types of vaccines, vaccination principles, target population, and specific vaccine administration. The "Guidelines for Vaccination of Kidney Transplant Candidates and Recipients in China" aims to provide theoretical reference for medical workers in the field of kidney transplantation in China, regarding the vaccination of kidney transplant candidates and recipients. It is expected to better guide the vaccination of kidney transplant candidates and recipients, reduce the risk of postoperative infection, and improve survival outcomes.

Background Air pollution exposure has a significant impact on maternal and child health. However, the research on the association between ambient ozone (O₃) exposure during pregnancy and the risk of premature birth in newborns is limited, and the conclusions are inconsistent. Objective To investigate the association of ambient O₃ exposure during pregnancy with the risk of preterm birth in Guangdong Province. Methods Data of pregnant women in Guangzhou from 2013 to 2019 and Foshan from 2018 to 2023 were collected, and O₃ concentrations during different trimesters were assessed according to maternal residential addresses. Bilinear interpolation was used to evaluate the concentrations of air pollution. A cohort study design was adopted in our study. Restricted cubic spline curves were used to evaluate the exposure-response relationship between O₃ exposure and preterm birth risk and explore potential exposure threshold of O₃. Logistic regression models were used to evaluate the association of O₃ exposure with preterm birth. Results A total of 702 924 pregnant women were included in this study, of whom 43 051 (6.12%) were preterm. The average O₃ exposure concentrations of pregnant women during the first, second, third, and whole trimesters were 95.51, 97.51, 100.60, and 97.87 μg·m⁻³, respectively. We observed J-shaped associations between O₃ exposure and preterm birth risk during the second, third, and whole trimesters of pregnancy using restricted cubic spline curves. This study found that there were threshold concentrations between O₃ exposure and preterm birth risk during different gestational periods, and the threshold concentrations in the first, second, third, and whole trimesters were 112.32, 99.83, 111.74, and 112.46 μg·m⁻³, respectively. During the second, third, and whole trimesters of pregnancy, after adjusting for maternal age, baby sex, pre-pregnancy body mass index, mode of delivery, baby birth weight, gestational diabetes, and gestational hypertension, the odds ratios (OR) of preterm birth were 1.02 (95%CI: 1.01, 1.04), 1.02 (95%CI: 1.00, 1.03), and 1.17 (95%CI: 1.13, 1.21) for each 10 μg·m⁻³ increase in O₃ concentration above the O₃ threshold. No significant association was found between O₃ exposure and the risk of preterm birth during the first trimester. Conclusion There is a nonlinear association between the risk of preterm birth and O₃ exposure during pregnancy, and higher concentrations of O₃ exposure during pregnancy are associated with the risk of preterm birth. Above the O₃ threshold concentration during pregnancy, especially during the second, third, and whole trimesters, the risk of preterm birth elevates with the increase of O₃ exposure concentrations.

ObjectiveTo investigate the therapeutic effect of sequential administration of Dihuang Baoyuan granules （DHBY， the prescription for consolidating body resistance） and Fuling Yunhua granules （FLYH， the prescription for treating symptoms） on spontaneous type 2 diabetes mellitus （T2DM） in mice. MethodsAccording to the fasting blood glucose （FBG） level， 12-week-old db/db mice were randomized into six groups： model， DHBY （18.02 g·kg^-1）， FLYH （14.80 g·kg^-1）， sequential administration 1 （SEQ-1， DHBY 18.02 g·kg^-1+FLYH 14.80 g·kg^-1）， sequential administration 2 （SEQ-2， FLYH 14.80 g·kg^-1+DHBY 18.02 g·kg^-1）， and dapagliflozin （Dapa， 1.3 mg·kg^-1）. The m/m mice in the same litter were selected as the normal group. The mice were administrated with corresponding drugs by gavage for 8 consecutive weeks. During the 8 weeks of drug administration and 2 weeks after withdrawal， the retinal thickness， FBG， hemoglobin A1c （HbA1c）， and insulin were determined， and histopathological changes of the pancreas， liver， kidney， and retina were observed by hematoxylin-eosin （HE） staining. ResultsCompared with the model group， SEQ-1 for 4 weeks lowered the FBG level （P<0.05）， raised the insulin level， decreased the triglyceride （TG） level （P<0.05）， increased the number of optic ganglion cells and diminished vacuolar degeneration of pancreatic islet and liver. SEQ-2 lowered FBG and HbA1c levels （P<0.05）， rose the insulin level， increased the retinal thickness and the number of optic ganglion cells （P<0.05）， and alleviated vacuolar degeneration of pancreatic islet and liver. Two weeks after drug withdrawal， Dapa tended to increase FBG and HbA1c compared with those at the time of drug withdrawal. However， the levels of FBG and HbA1c in the SEQ-2 group remained decreasing （P<0.05）. ConclusionSEQ-1 and SEQ-2 can lower the blood glucose level and ameliorate diabetic retinopathy， and SEQ-2 outperformed DHBY and FLYH in lowering the blood glucose level. Moreover， SEQ-2 can maintain the blood glucose-lowering effect after drug withdrawal.

ObjectiveTo investigate the therapeutic effect of sequential administration of Dihuang Baoyuan granules （DHBY， the prescription for consolidating body resistance） and Fuling Yunhua granules （FLYH， the prescription for treating symptoms） on spontaneous type 2 diabetes mellitus （T2DM） in mice. MethodsAccording to the fasting blood glucose （FBG） level， 12-week-old db/db mice were randomized into six groups： model， DHBY （18.02 g·kg^-1）， FLYH （14.80 g·kg^-1）， sequential administration 1 （SEQ-1， DHBY 18.02 g·kg^-1+FLYH 14.80 g·kg^-1）， sequential administration 2 （SEQ-2， FLYH 14.80 g·kg^-1+DHBY 18.02 g·kg^-1）， and dapagliflozin （Dapa， 1.3 mg·kg^-1）. The m/m mice in the same litter were selected as the normal group. The mice were administrated with corresponding drugs by gavage for 8 consecutive weeks. During the 8 weeks of drug administration and 2 weeks after withdrawal， the retinal thickness， FBG， hemoglobin A1c （HbA1c）， and insulin were determined， and histopathological changes of the pancreas， liver， kidney， and retina were observed by hematoxylin-eosin （HE） staining. ResultsCompared with the model group， SEQ-1 for 4 weeks lowered the FBG level （P<0.05）， raised the insulin level， decreased the triglyceride （TG） level （P<0.05）， increased the number of optic ganglion cells and diminished vacuolar degeneration of pancreatic islet and liver. SEQ-2 lowered FBG and HbA1c levels （P<0.05）， rose the insulin level， increased the retinal thickness and the number of optic ganglion cells （P<0.05）， and alleviated vacuolar degeneration of pancreatic islet and liver. Two weeks after drug withdrawal， Dapa tended to increase FBG and HbA1c compared with those at the time of drug withdrawal. However， the levels of FBG and HbA1c in the SEQ-2 group remained decreasing （P<0.05）. ConclusionSEQ-1 and SEQ-2 can lower the blood glucose level and ameliorate diabetic retinopathy， and SEQ-2 outperformed DHBY and FLYH in lowering the blood glucose level. Moreover， SEQ-2 can maintain the blood glucose-lowering effect after drug withdrawal.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.