ObjectiveTo investigate the disruptive effects of perinatal exposure to the environmental endocrine disruptor bisphenol AF (BPAF) on hepatic lipid metabolism in prepubertal (postnatal day 21, PND21) male offspring rats, and to provide scientific evidence for assessing the obesogenic effect of BPAF. MethodsSprague-Dawley (SD) rats aged 8 weeks were used in this study. Pregnant rats were divided into BPAF dose groups (2, 10, 50 mg·kg⁻¹) and a vehicle control group (corn oil), with 6 confirmed pregnant females per group. Gavage administration started from gestational day 0 and continued until the end of lactation. At PND21, one male offspring per litter was randomly selected. Serum concentrations of glucose (GLU), triglyceride (TG), total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), leptin (LEP), free fatty acid (FFA), as well as oxidative stress markers superoxide dismutase (SOD) and malondialdehyde (MDA), were measured. Pathological changes in liver and adipose tissues were evaluated, and the expression levels of genes related to hepatic lipid metabolism were measured. ResultsCompared to the vehicle control group, the 50 mg·kg⁻¹ group showed significantly increased serum LEP and MDA levels in male offspring (P<0.05), and significant upregulation of hepatic lipoprotein lipase (Lpl), fatty acid synthetase (Fas), and peroxisome proliferator-activated receptor γ (Pparg) gene expression (P<0.05). The 2 mg·kg⁻¹ group exhibited a significant increase in adipocyte length (P<0.05), while the 50 mg·kg⁻¹ group showed significant increases in both adipocyte area and length (P<0.05). No significant abnormalities were observed in liver histopathological examination. ConclusionPerinatal exposure to 50 mg·kg⁻¹ BPAF induced adipocyte hypertrophy, elevated leptin levels, upregulation of lipid synthesis gene expression, and enhanced oxidative stress in prepubertal male offspring, suggesting that BPAF may exert environmental obesogenic effects by disrupting lipid metabolism pathways.

OBJECTIVE To provide reference for medical institutions to establish the record management mode and review rules of off-label use of 5-aminolevulinic acid （ALA） in photodynamic therapy based on the level of evidence. METHODS All ALA-containing outpatient prescriptions in the rational drug use system in our hospital from January 1， 2024 to December 31， 2025 were retrospectively collected. Based on the drug instructions， the current status of off-label use of ALA in photodynamic therapy was identified . The relevant studies in Micromedex， PubMed， CNKI， Wanfang Data and other databases were systematically searched as the relevant evidence-based evidence of ALA off-label use. According to the Off-label Drug Use Filing Standard of the hospital，the evidence-based evaluation method was used to evaluate the evidence-based evidence of ALA off-label use and carry out hierarchical management. RESULTS A total of 1 803 effective prescriptions were included， of which 676 （37.49%） were off-label use， distributed in the dermatology department （564 prescriptions，83.43%） and the plastic surgery department （112 prescriptions，16.57%）. All 676 prescriptions were off-indications medication， involving ten types of skin diseases， primarily including moderate to severe acne （39.94%）， skin warts （25.44%）， Bowen’s disease （11.98%）， and others. According to evidence-based evidence，off-label uses such as moderate to severe acne， actinic keratosis， and Bowen’s disease were managed according to the evidence categoryⅠ orⅡ.The uses of extramammary Paget’s disease and rosacea were managed according to the evidence category Ⅲ.The uses of lichen sclerosus and keloids were managed according to the evidence category Ⅳ.The results of evidence-based evaluation showed that 92.01% of off-label use in our hospital had high-level evidence-based support （ evidence category was gradeⅠ-Ⅱ）. CONCLUSIONS Off-label uses supported by high-level evidence， such as moderate to severe acne， skin warts， and Bowen’s disease， can be managed under filing category Ⅰ or Ⅱ. For the use of lichen sclerosus and keloids， evidence-based evidence is insufficient and should be strictly restricted.The vast majority of ALA off-label use in our hospital has sufficient evidence-based basis.

OBJECTIVE: To analyze the functional impact of a rare heterozygous variant of SOS1 gene (c.283G>A, p.E95K) identified in a fetus with cervical cystic hygroma and to explore its association with the disease phenotype. METHODS: A pedigree analysis was carried out to evaluate the co-segregation of the variant with the disease phenotype. Bioinformatic tools were employed to assess the conservation, protein structure and stability. Functional validation was conducted on HEK293T cells using fluorescence quantitative reverse transcription-PCR and Western blotting to measure the expression of SOS1 and phosphorylation levels of extracellular regulated protein kinases (ERK) and c-Jun N-terminal kinase. A literature review of previously reported disease-associated SOS1 variants was also carried out. This study has been approved by the Medical Ethics Committee of West China Second University Hospital, Sichuan University (Ethics No.: 201940). RESULTS: The variant was inherited from the husband of the woman with distinctive facial features and has co-segregated with the phenotype. Bioinformatics analysis indicated that the variant is located in a highly conserved region, and that p.E95K could disrupt key amino acid interactions and protein stability. Multiple bioinformatic predictions consistently suggested the pathogenicity of this variant. Functional assays demonstrated reduced SOS1 protein expression and decreased ERK phosphorylation. CONCLUSION This study has revealed the functional impact of the SOS1 c.283G>A (p.E95K) variant, suggesting that it may contribute to the developmental phenotypes through a haploinsufficiency mechanism.
Humans ; SOS1 Protein/chemistry* ; Female ; HEK293 Cells ; Male ; Pedigree ; Phenotype ; Adult

Vascular endothelial growth factor (VEGF) inhibitors are drugs that target and inhibit tumor angiogenesis. By blocking the signaling pathway of VEGF and its receptor, they suppress tumor proliferation and play a crucial role in tumor treatment. However, their side effects, such as hypertension, proteinuria, hand-foot skin reactions, and myelosuppression, during treatment seriously affect patients' treatment compliance and quality of life. The development of intervention strategies for the side effects of VEGF inhibitors is of great importance for tumor treatment. This article reviews the clinical characteristics and toxic mechanisms of common side effects caused by VEGF inhibitors during tumor treatment and summarizes intervention strategies that combine traditional Chinese and Western medicines. Drug dosages were precisely monitored and adjusted to achieve antitumor treatment. Patients' discomfort symptoms are improved through prescriptions that act by tonifying qi and promoting blood circulation, strengthening the spleen, and tonifying the kidney. The combination of traditional Chinese and Western medicines is used to treat patients, thus providing a safe and effective treatment plan for patients with cancer.

ObjectiveTo analyze the research hotspots and development trends in the field of spinal cord stimulation (SCS) for spinal cord injury (SCI). MethodsLiterature about SCS for SCI was retrieve from the Web of Science (WOS) Core Collection database, with a time range from January, 1999 to July, 2025. VOSviewer 1.6.20 and CiteSpace 6.4.R2 were used to analyze the annual publication volume, countries, authors, institutions, journals and keywords. ResultsA total of 636 literatures were included. From 1999 to 2025, the overall publication trend in this field showed an upward trajectory, with recent years fluctuating but tending to stabilize. The country with the most publications was the United States (429 papers), followed by Russia (98 papers) and China (70 papers). The institution with the highest number of publications was the University of California, Los Angeles (76 papers), the author with the most publications was V. Reggie Edgerton (70 papers), and the journal with the most publications was Journal of Clinical Medicine (31 papers). The most frequently cited study focused on exploring the combination of epidural spinal cord stimulation with task-specific training to restore motor function in patients with complete SCI. Keyword analysis showed that the research hotspots in this field were mainly focused on neuroregulation mechanisms, recovery of motor and autonomic nervous dysfunction, artificial intelligence, closed-loop stimulation and brain-computer interface technology innovations. In recent years, the research focus gradually shifted from basic mechanisms to personalized and precise multifunctional rehabilitation strategies. ConclusionThe field of SCS for SCI has undergone phases of basic mechanism exploration and clinical application expansion. Current research hotspots and future trends focus primarily on the development of new stimulation paradigms and combined innovative technologies.

ObjectiveTo delineate imaging findings using an imaging platform and investigate the correlation between MRI characteristics of spinal cord atrophy and clinical diagnosis in children with spinal cord injury (SCI). MethodsImaging data of 150 children with SCI admitted to Beijing Bo'ai Hospital, China Rehabilitation Research Center, from January, 2002 to March, 2024 were collected and imported into the imaging platform. The anteroposterior and transverse diameters of the middle part of the spinal cord at the cross-section with the most severe atrophy were measured, and the relevant indicators of the previous normal spinal cord segment were measured as controls; the radiomic features were extracted. Clinical data of the children including gender, age, cause of injury, sensory level, motor level, spinal cord injury level, injury severity and disease course were collected. ResultsSpinal cord atrophy was identified in 81 cases (54%), among which 78 cases (96%) were American Spinal Injury Association Impairment Scale (AIS) grade A and 3 cases (4%) were AIS grade C. The upper boundary of the spinal cord atrophy site strongly correlated with the injury level, motor level and sensory level (r > 0.8, P < 0.001). ConclusionMore than half of children with SCI may develop secondary spinal cord atrophy, the vast majority of whom suffer from complete spinal cord injury; the upper boundary of spinal cord atrophy is correlated with the injury level.

Optical microscopy is essential for exploring biological and material structures, with resolution determining the level of observable detail. The advent of super-resolution fluorescence microscopy has broken the diffraction limit, achieving nanoscale resolution. However, traditional assessment methods, such as the Rayleigh criterion and point spread function (PSF) width measurement, rely on empirical judgments and diffraction-limited models, rendering them inadequate for modern super-resolution imaging. This review systematically traces the evolution of resolution assessment methodologies, from classical criteria to advanced strategies tailored for various super-resolution modalities. We first discuss Fourier-based quantitative methods. Fourier ring correlation (FRC) and its 3D counterpart, Fourier shell correlation (FSC), objectively determine resolution by evaluating the statistical correlation of two independent image reconstructions in frequency space. These methods offer robustness against noise and provide a global resolution metric, but they require data independence and are computationally intensive. They have become the prevailing standards in electron and super-resolution microscopy. Subsequently, we examine adaptations for specific super-resolution techniques. For single-molecule localization microscopy (SMLM) techniques such as PALM and STORM, the Fourier image resolution (FIRE) method extends FRC by incorporating a physical model that accounts for localization precision and labeling density. For stimulated emission depletion (STED) microscopy and other nonlinear techniques, assessment strategies differ. While PSF shrinkage measurements using fluorescent beads are useful for system calibration, evaluating the effective resolution directly on biological samples is more practical. This is typically performed via linewidth analysis of known structures (e.g., microtubules) or edge-spread function measurements, capturing the effects of photobleaching and sample-induced aberrations. A major paradigm shift is parameter-free resolution estimation based on decorrelation analysis. This method analyzes the autocorrelation decay of a single image’s Fourier spectrum to identify the cutoff spatial frequency without requiring dual datasets or user-defined thresholds. Its high efficiency and broad applicability have been validated across widefield, confocal, STED, SIM, and SMLM modalities. Optimized rendering strategies for SMLM data further enhance its accuracy, and it is emerging as a tool for real-time optimization of experimental parameters. The review also addresses the “gold standard” of resolution validation using well-defined nanostructures, such as DNA origami and nuclear pore complexes, which provide ground truth for verifying resolution claims and detecting artifacts. In the era of artificial intelligence, deep learning plays a dual role: it powerfully enhances image resolution but also introduces challenges, as models may generate “hallucinations” or false details. This underscores the need for new validation metrics to verify the physical fidelity of AI-generated content. Finally, we outline future directions: developing unified cross-modality standards, enabling real-time dynamic resolution monitoring for live-cell imaging, creating techniques for generating local resolution maps to capture sample heterogeneity, and integrating intelligent error correction to ensure data veracity. By providing a comprehensive overview of resolution assessment progress and challenges, this review aims to equip researchers with the knowledge to select appropriate tools, thereby fostering rigorous quantitative imaging in the life and material sciences.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

Hygroscopicity research has long been a key focus and hot topic in Chinese materia medica（CMM）. Elucidating hygroscopic mechanisms plays a vital role in formulation design， process optimization， and storage condition selection. Hygroscopic models serve as essential tools for characterizing CMM hygroscopic mechanisms， with various types available. The double exponential model is a kinetic mathematical model constructed based on the law of conservation of energy and Fick's first law of diffusion， tailored to the physical properties of CMM extracts. In recent years， this model has been extensively applied to simulate the dynamic moisture absorption behavior of CMM extracts and solid dosage forms under varying humidity conditions. It has revealed the correlation between moisture absorption kinetic parameters and material properties， offering a new perspective for characterizing the moisture uptake behavior of CMM. This paper systematically reviews the application progress of this model in the field of CMM， analyzes its advantages， disadvantages， and challenges in this domain， and explores its potential application trends in other fields. It aims to provide references for elucidating the moisture absorption mechanisms of CMM and researching moisture-proofing technologies， while also offering insights for its broader application in food and polymer materials.