ObjectiveThis paper aims to investigate and evaluate the staged efficacy and safety of the representative empirical prescription of the “Zhu Ke Jiao” theory， Qijia Rougan prescription， combined with entecavir in the treatment of hepatic fibrosis in chronic hepatitis B. MethodsA multicenter randomized controlled clinical study was conducted， and 101 patients diagnosed with chronic hepatitis B-related hepatic fibrosis （CHB-HF） who met the diagnosis and inclusion criteria were randomly assigned to an observation group （Qijia Rougan prescription + entecavir） and a control group （entecavir）. The treatment duration was 24 weeks. Liver stiffness measurement （LSM）， fibrosis-4 index （FIB-4）， portal vein diameter， hepatitis B serology， biochemical indicators， hepatic fibrosis markers in serum ［hyaluronic acid （HA）， laminin （LN）， procollagen Ⅲ peptide （PⅢP）， and type Ⅳ collagen （Ⅳ-C）］， and traditional Chinese medicine syndrome scores were used as efficacy evaluation indicators. Efficacy assessments and explorations of different staged subgroups of Qijia Rougan prescription were conducted according to LSM values based on the Metavir pathological staging standard. ResultsA total of 98 cases were included for statistical analysis， with 49 cases in the observation group and 49 in the control group. The general data of the patients in both groups were comparable. Compared with the same group before treatment， the observation group showed a significant reduction in LSM and FIB-4 （P<0.01）， as well as notable improvements in LN， Ⅳ-C， and various TCM syndrome scores （P<0.05， P<0.01）. When compared to the control group after treatment， the observation group demonstrated significant improvements in LSM， FIB-4， and various TCM syndrome score indicators （P<0.05， P<0.01）， indicating that the observation group performed better than the control group. Subgroup analysis of the regression of hepatic fibrosis stages showed that compared to the same group before treatment， the observation group had better improvement in regression of stages F2 and F3 （P<0.05）. When compared to the control group after treatment， the observation group exhibited superior improvement in regression of stage F3 （P<0.05）. No adverse events occurred in either group during the treatment period. ConclusionCompared with entecavir alone， the combination of Qijia Rougan prescription and entecavir significantly improves the degree of hepatic fibrosis and clinical TCM symptoms in patients. The optimal intervention period is primarily during stage F3， which is a potential “interception” point of the “Zhu Ke Jiao” theory.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

ObjectiveTo investigate the association between metabolic associated fatty liver disease （MAFLD） and the risk of atherosclerotic cardiovascular disease （ASCVD）， and to provide data support for the prevention and treatment of such metabolic-associated diseases in clinical practice. MethodsAn observation cohort was established for the workers of Kailuan who underwent physical examination for the first time from June 2006 to October 2007 and had complete liver assessment data， without the history of malignant tumor， MAFLD or ASCVD. According to the presence or absence of MAFLD， the patients were divided into non-MAFLD group with 67 565 patients and MAFLD group with 29 004 patients， and according to the presence or absence of ASCVD， the patients were divided into non-ASCVD group with 69 141 patients and ASCVD group with 481 patients. The group t-test or the Wilcoxon rank-sum test was used for comparison of continuous data between the two groups. The χ² test was used for comparison of categorical data between the two groups. The life-table method was used to calculate the cumulative incidence rates of new-onset ASCVD and MAFLD； the Kaplan-Meier method was used to plot the survival curves of the cumulative incidence rates of ASCVD in the MAFLD group and the non-MAFLD group and the cumulative incidence rates of MAFLD in the ASCVD group and the non-ASCVD group， and the log-rank test was used for comparison of cumulative incidence rates between two groups. A multivariate Cox proportional-hazards regression model analysis was used to investigate the impact of MAFLD on the risk of ASCVD and the impact of ASCVD on the risk of MAFLD. ResultsCompared with the non-MAFLD group， the MAFLD group had significantly higher levels of body mass index （BMI）， waist circumference， systolic blood pressure （SBP）， diastolic blood pressure （DBP）， resting heart rate， alanine aminotransferase， uric acid （UA）， fasting blood glucose （FBG）， triglyceride （TG）， total cholesterol， low-density lipoprotein cholesterol， and high sensitivity C-reactive protein （hs-CRP）， as well as significanty lower levels of estimated glomerular filtration rate （eGFR） and high-density lipoprotein cholesterol （all P <0.05）. Compared with the non-ASCVD group， the ASCVD group had significantly higher levels of BMI， waist circumference， SBP， DBP， UA， FBG， TG， and hs-CRP and a significantly lower level of eGFR （all P<0.05）. The incidence rate of new-onset ASCVD continued to increase over time in the MAFLD group and the non-MAFLD group， while the incidence rate of new-onset MAFLD firstly increased and then remained stable over time in the ASCVD group and the non-ASCVD group. There were 4 263 cases （14.70%） of new-osnet ASCVD in the MAFLD group， with an incidence density of 12.90 per 1 000 person-years， while there were 6 529 cases （9.66%） of new-osnet ASCVD in the non-MAFLD group， with an incidence density of 8.24 per 1 000 person-years， and there were significant differences in the incidence density and cumulative incidence rate of ASCVD between the two groups （χ²=519.09 and 531.80， both P<0.05）. There were 148 cases （30.77%） of new-onset MAFLD in the ASCVD group， with an incidence density of 40.10 per 1 000 person-years， while there were 32 194 cases （46.56%） of new-onset MAFLD in the non-ASCVD group， with an incidence density of 57.59 per 1 000 person-years， and there were significant differences in the incidence density and cumulative incidence rate of MAFLD between the two groups （χ²=19.29 and 30.78， both P<0.05）. The corrected multivariate Cox proportional-hazards regression model analysis showed that MAFLD was a risk factor for new-onset ASCVD （hazard ratio ［HR］=1.11， 95% confidence interval ［CI］： 1.06 — 1.16， P<0.001）， while ASCVD was a protective factor against new-onset MAFLD （HR=0.72， 95%CI： 0.61 — 0.85， P<0.001）. ConclusionThere is a significant association between MAFLD and ASCVD， with an increase in the risk of ASCVD in the MAFLD population and a reduction in the risk of MAFLD in the ASCVD population.

Objective To explore the correlation of MET status in patients with advanced prostatic acinar adenocarcinoma with the clinical pathological parameters and prognosis. Methods The specimen from 135 patients with advanced prostatic acinar adenocarcinoma was included. The expression of c-MET protein was detected via immunohistochemistry, and MET gene amplification was assessed by fluorescence in situ hybridization. The relationships of c-MET expression and gene amplification with clinicopathological features and prognosis were analyzed. Results The positive expression rate of c-MET was 52.60% (71/135). Compared with the c-MET expression in adjacent tissues, that in tumor tissues showed lower heterogeneous expression. Among the cases, 1.71% (2/117) exhibited MET gene polyploidy, but no gene amplification was detected. Positive c-MET expression was significantly correlated with high Gleason scores and grade groups (P=0.0073). However, no significant relationship was found between c-MET expression and progression-free survival or post-treatment t-PSA levels. Conclusion c-MET protein is expressed at a relatively low level in advanced prostatic acinar adenocarcinoma, suggesting that c-MET may not be a viable target for ADC drug development in prostatic acinar adenocarcinoma.

OBJECTIVE: Coptis chinensis (Huanglian in Chinese, HL) is commonly utilized in clinical settings to counteract dyslipidemia in patients with hot syndrome. Its lipid-reducing efficacy has been consistently demonstrated in high-fat diet (HFD)-induced hyperlipidemic animal models. However, whether HL's efficacy differs in HFD-fed animals with hot or cold syndromes remains unclear. This study aims to discern the variations in the anti-hyperlipidemic effects of HL in HFD-fed mice with hot or cold syndromes. METHODS: HFD-induced C57BL/6 mice were subjected to cold or hot syndrome via two weeks of ice water (0 °C) and levothyroxine sodium (240 µg/kg) treatment, respectively. Then, an aqueous extract of HL was administered to the mice via oral gavage over the following four-week period. Lipid levels in the serum and liver were gauged to determine the lipid-reducing effects of HL. Furthermore, gut microbiota composition was elucidated using full-length 16S rRNA gene sequencing. RESULTS: HL notably reduced lipid levels in HFD-induced hyperlipidemic mice. Its efficacy was amplified in hyperlipidemic mice with a hot syndrome but was markedly reduced in those with a cold syndrome. HL treatment led to a decline in alpha-diversity (characterized by ACE, Chao1, Shannon and Simpson index) of the gut microbiota in both sets of mice but affected specific microbial populations based on the syndrome. Specifically, while HL led to a notable increase in Eubacterium, Robinsoniella, and Lachnoclostridium genera, along with the enhancement of Clostridium innocuum and Bacteroides thetaiotaomicron species across all conditions, it syndrome-dependently stimulated Romboutsia ilealis and Parabaceroides_sp_HGS0025 species in mice with hot syndrome. CONCLUSION HL shows stronger lipid-lowering effect on hyperlipidemic mice with hot syndrome, which is in accordance with its traditional usage in clinic. The therapeutic outcomes of HL are intrinsically tied, at least in part, to its modulatory effects on the gut microbiota, offering fresh insights into the foundational principles of traditional Chinese medicine.

This study aimed to comprehensively examine the association of gallstones, cholecystectomy, and cancer risk. Multivariable logistic regressions were performed to estimate the observational associations of gallstones and cholecystectomy with cancer risk, using data from a nationwide cohort involving 239 799 participants. General and gender-specific two-sample Mendelian randomization (MR) analysis was further conducted to assess the causalities of the observed associations. Observationally, a history of gallstones without cholecystectomy was associated with a high risk of stomach cancer (adjusted odds ratio (aOR)=2.54, 95% confidence interval (CI) 1.50-4.28), liver and bile duct cancer (aOR=2.46, 95% CI 1.17-5.16), kidney cancer (aOR=2.04, 95% CI 1.05-3.94), and bladder cancer (aOR=2.23, 95% CI 1.01-5.13) in the general population, as well as cervical cancer (aOR=1.69, 95% CI 1.12-2.56) in women. Moreover, cholecystectomy was associated with high odds of stomach cancer (aOR=2.41, 95% CI 1.29-4.49), colorectal cancer (aOR=1.83, 95% CI 1.18-2.85), and cancer of liver and bile duct (aOR=2.58, 95% CI 1.11-6.02). MR analysis only supported the causal effect of gallstones on stomach, liver and bile duct, kidney, and bladder cancer. This study added evidence to the causal effect of gallstones on stomach, liver and bile duct, kidney, and bladder cancer, highlighting the importance of cancer screening in individuals with gallstones.
Humans ; Mendelian Randomization Analysis ; Gallstones/complications* ; Female ; Male ; Cholecystectomy/statistics & numerical data* ; Middle Aged ; Risk Factors ; Aged ; Adult ; Neoplasms/etiology* ; Stomach Neoplasms/epidemiology*

ObjectiveTo explore the clinical safety of Feilike Mixture （FLK） in the real world. MethodsThe safety of all children who received FLK from 29 institutions in 12 provinces between January 21，2021 and December 25，2021 was evaluated through prospective centralized surveillance and a nested case control study. ResultsA total of 3 035 juveniles were included. There were 29 research centers involved，which are distributed across 12 provinces，including one traditional Chinese medicine （TCM） hospital and 28 general hospitals. The average age among the juveniles was （4.77±3.56） years old，and the average weight was （21.81±12.97） kg. Among them，119 cases （3.92%） of juveniles had a history of allergies. Acute bronchitis was the main diagnosis for juveniles，with 1 656 cases （54.46%）. FLK was first used in 2 016 cases （66.43%），and 142 juvenile patients had special dosages，accounting for 4.68%. Among them，92 adverse drug reactions （ADRs） occurred，including 73 cases of gastrointestinal system disorders，10 cases of metabolic and nutritional disorders，eight cases of skin and subcutaneous tissue diseases，two cases of vascular and lymphatic disorders，and one case of systemic diseases and various reactions at the administration site. The manifestations of ADRs were mainly diarrhea，stool discoloration，and vomiting，and no serious ADRs occurred. The results of multi-factor analysis indicated that special dosages （the use of FLK）［odds ratio （OR） of 2.642， 95% confidence interval （CI） of 1.105-6.323］，combined administration： spleen aminopeptide （OR of 4.978， 95%CI of 1.200-20.655），and reason for combined administration： anti-infection （OR of 1.814， 95%CI of 1.071-3.075） were the risk factors for ADRs caused by FLK. Conclusion92 ADRs occurred among 3 035 juveniles using FLK. The incidence of ADRs caused by FLK was 3.03%，and the severity was mainly mild or moderate. Generally，the prognosis was favorable after symptomatic treatment such as drug withdrawal or dosage reduction，suggesting that FLK has good clinical safety.

ObjectiveTo establish the specific chromatogram and quantitative analysis of multi-components by single-marker（QAMS） based on linear calibration using two reference substances（LCTRS）， explore the consistency between Hedyotis Herba dispensing granules and standard decoction， and evaluate the quality of the dispensing granules. MethodsHigh performance liquid chromatography（HPLC） specific chromatogram was established based on 15 batches of Hedyotis Herba standard decoction and 10 batches of the dispensing granules， and LCTRS was used to locate chromatographic peaks. The actual retention times of 7 characteristic peaks in the specific chromatogram was measured on 24 different types of C₁₈ columns， taking deacetyl asperulosidic acid and asperulosidic acid as the dual standard compounds， the retention times of the other 5 characteristic peaks were predicted and validated. Based on this， QAMS was developed to determine the contents of four components（deacetyl asperulosidic acid， deacetyl asperulosidic acid methyl ester， asperulosidic acid， and p-coumaric acid）. Then， the relative correction factors of deacetyl asperulosidic acid， deacetyl asperulosidic acid methyl ester and p-coumaric acid were calculated using the reference peak of asperulosidic acid in the dual standard compounds， and each component was quantified accordingly. Finally， the consistency between the dispensing granules and standard decoction was assessed by taking extract rate of the standard decoction， consistency of the specific chromatograms， contents and transfer rates of the indicator components as indexes， and the quality of the dispensing granules was evaluated. ResultsThere were 7 common peaks in the characteristic chromatogram of samples of Hedyotis Herba standard decoction and the dispensing granules， and four of them were identified by reference standards， namely deacetyl asperulosidic acid（peak 1）， deacetyl asperulosidic acid methyl ester（peak 3）， asperulosidic acid（peak 6） and p-coumaric acid（peak 7）. The similarity between the dispensing granules and the standard decoction was >0.9. The absolute deviation in the predicted retention time for each component by LCTRS was lower than that of the relative retention time method. The extract rate of the 15 batches of Hedyotis Herba standard decoction ranged from 7.89% to 14.60%， the contents of deacetyl asperulosidic acid， deacetyl asperulosidic acid methyl ester， asperulosidic acid and p-coumaric acid were 6.62-19.70， 3.83-17.99， 1.57-6.69， 1.62-4.52 mg·g^-1， and the transfer rates of these components from decoction pieces to the standard decoction were 22.89%-39.60%， 34.03%-62.24%， 24.25%-43.70%， and 40.58%-73.71%， respectively. The extract rate， index component contents and transfer rates from decoction pieces to the three batches of Hedyotis Herba dispensing granules（P1-P3）， produced by manufacturer A， were similar to those of the standard decoction prepared from the same batch of decoction pieces， and all fell within the specified range. The contents of the 4 indicator components in 7 batches of the dispensing granules（P4-P10） from manufacturers B-E were all within the range of the content converted from the standard decoction based on the quantity of the dispensing granules. ConclusionThe established specific chromatogram and QAMS based on LCTRS are reasonable and reliable. Based on the evaluation indicators of standard decoction yield， consistency of specific chromatograms， contents and transfer rates of the four index components， the 10 batches of Hedyotis Herba dispensing granules from various manufacturers have exhibited good consistency with the standard decoction， indicating that the current production process is relatively reasonable.

Soil cadmium pollution can adversely affect the cultivation of the ornamental plant, Coleus scutellarioides. Upon cadmium contamination of the soil, the growth of C. scutellarioides is impeded, and it may even succumb to the toxic accumulation of cadmium. In this study, we investigated the effects of arbuscular mycorrhizal fungi (AMF) on the adaptation of C. scutellarioides to cadmium stress, by measuring the physiological metabolism and the degree of root damage of C. scutellarioides, with Aspergillus oryzae as the test fungi. The results indicated that cadmium stress increased the activity of superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT), and the content of malondialdehyde (MDA) and proline (Pro) within the cells of C. scutellarioides, but inhibited mycorrhizal infestation rate, root vigour and growth rate to a great degree. With the same cadmium concentration, the inoculation of AMF significantly improved the physiological indexes of C. scutellarioides. The maximum decrease of MDA content was 42.16%, and the content of secondary metabolites rosemarinic acid and anthocyanosides could be increased by up to 27.43% and 25.72%, respectively. Meanwhile, the increase of root vigour was as high as 35.35%, and the DNA damage of the root system was obviously repaired. In conclusion, the inoculation of AMF can promote the accumulation of secondary metabolites, alleviate root damage, and enhance the tolerance to cadmium stress in C. scutellarioides.
Cadmium/toxicity* ; Mycorrhizae/physiology* ; Plant Roots/drug effects* ; Soil Pollutants/toxicity* ; Stress, Physiological ; Superoxide Dismutase/metabolism*