ObjectiveTo establish an ultra-performance liquid fingerprint and multi-components determination method for Naomaili granules. To evaluate the quality of different batches by chemometrics， and the anti-neuroinflammatory effects of water extract and main components of Naomaili granules were tested in vitro. MethodsThe similarity and common peaks of 27 batches of Naomaili granules were evaluated by using Ultra performance liquid chromatography （UPLC） fingerprint detection. Ultra-performance liquid chromatography-tandem mass spectrometry （UPLC-MS/MS） technology was used to determine the content of the index components in Naomaili granules and to evaluate the quality of different batches of Naomaili granules by chemometrics. LPS-induced BV-2 cell inflammation model was used to investigate the anti-neuroinflammatory effects of the water extract and main components of Naomaili granules. ResultsThe similarity of fingerprints of 27 batches of samples was > 0.90. A total of 32 common peaks were calibrated， and 23 of them were identified and assigned. In 27 batches of Naomaili granules， the mass fractions of 14 components that were stachydrine hydrochloride， leonurine hydrochloride， calycosin-7-O-glucoside， calycosin，tanshinoneⅠ， cryptotanshinone， tanshinoneⅡ_A， ginsenoside Rb₁， notoginsenoside R₁， ginsenoside Rg₁， paeoniflorin， albiflorin， lactiflorin， and salvianolic acid B were found to be 2.902-3.498， 0.233-0.343， 0.111-0.301， 0.07-0.152， 0.136-0.228， 0.195-0.390， 0.324-0.482， 1.056-1.435， 0.271-0.397， 1.318-1.649， 3.038-4.059， 2.263-3.455， 0.152-0.232， 2.931-3.991 mg∙g^-1， respectively. Multivariate statistical analysis showed that paeoniflorin， ginsenoside Rg₁， ginsenoside Rb₁ and staphylline hydrochloride were quality difference markers to control the stability of the preparation. The results of bioactive experiment showed that the water extract of Naomaili granules and the eight main components with high content in the prescription had a dose-dependent inhibitory effect on the release of NO in the cell supernatant. Among them， salvianolic acid B and ginsenoside Rb₁ had strong anti-inflammatory activity， with IC₅₀ values of （36.11±0.15） mg∙L^-1 and （27.24±0.54） mg∙L^-1， respectively. ConclusionThe quality evaluation method of Naomaili granules established in this study was accurate and reproducible. Four quality difference markers were screened out， and eight key pharmacodynamic substances of Naomaili granules against neuroinflammation were screened out by in vitro cell experiments.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

This consensus will introduce the characteristics of fillers used in the surgical cavities of domestic nasal surgery patients based on relevant literature and expert opinions. It will also provide recommendations for the selection of cavity fillers for different nasal diseases, with chronic sinusitis as a representative example.
Humans ; Nasal Cavity/surgery* ; Nasal Surgical Procedures ; China ; Consensus ; Sinusitis/surgery* ; Dermal Fillers

Allergen-specific immunotherapy（AIT） remains the only therapeutic approach with the potential to modify the natural course of allergic rhinitis（AR）. Nevertheless, considerable inter-individual variability exists in patients'responses to AIT. To facilitate more reliable assessment of treatment efficacy, the China Rhinopathy Research Cooperation Group（CRRCG） convened young and middle-aged nasal experts in China to formulate the present consensus. The recommended subjective outcome measures for AIT comprise symptom scores, medication scores, combined symptom and medication scores, quality-of-life assessments, evaluation of disease control, and assessment of comorbidities. Objective indicators may supplement these measures. Currently available objective approaches include skin prick testing, nasal provocation testing, and allergen exposure chambers. However, these methods remain constrained by practical limitations and are not yet appropriate for routine implementation in clinical efficacy evaluation. In addition, several biomarkers, including sIgE and the sIgE/tIgE ratio, sIgG4, serum IgE-blocking activity, IgA, cytokines and chemokines, as well as immune cell surface molecules and their functional activity, have been shown to have associations with AIT outcomes. While these biomarkers may complement subjective assessments, they are subject to significant limitations. Consequently, large-scale multicenter trials and real-world evidence are required to strengthen the evidence base. The present consensus underscores the necessity of integrating patients'subjective experiences with objective testing throughout the treatment process, thereby providing a more comprehensive and accurate framework for efficacy evaluation. Looking forward, future investigations should prioritize the incorporation of multi-omics data and artificial intelligence methodologies, which hold promise for overcoming current limitations in assessment strategies and for advancing both the standardization and personalization of AIT.
Humans ; Allergens/immunology* ; China ; Consensus ; Desensitization, Immunologic ; Immunoglobulin E ; Quality of Life ; Rhinitis, Allergic/therapy* ; Treatment Outcome ; East Asian People

This study aimed to comprehensively examine the association of gallstones, cholecystectomy, and cancer risk. Multivariable logistic regressions were performed to estimate the observational associations of gallstones and cholecystectomy with cancer risk, using data from a nationwide cohort involving 239 799 participants. General and gender-specific two-sample Mendelian randomization (MR) analysis was further conducted to assess the causalities of the observed associations. Observationally, a history of gallstones without cholecystectomy was associated with a high risk of stomach cancer (adjusted odds ratio (aOR)=2.54, 95% confidence interval (CI) 1.50-4.28), liver and bile duct cancer (aOR=2.46, 95% CI 1.17-5.16), kidney cancer (aOR=2.04, 95% CI 1.05-3.94), and bladder cancer (aOR=2.23, 95% CI 1.01-5.13) in the general population, as well as cervical cancer (aOR=1.69, 95% CI 1.12-2.56) in women. Moreover, cholecystectomy was associated with high odds of stomach cancer (aOR=2.41, 95% CI 1.29-4.49), colorectal cancer (aOR=1.83, 95% CI 1.18-2.85), and cancer of liver and bile duct (aOR=2.58, 95% CI 1.11-6.02). MR analysis only supported the causal effect of gallstones on stomach, liver and bile duct, kidney, and bladder cancer. This study added evidence to the causal effect of gallstones on stomach, liver and bile duct, kidney, and bladder cancer, highlighting the importance of cancer screening in individuals with gallstones.
Humans ; Mendelian Randomization Analysis ; Gallstones/complications* ; Female ; Male ; Cholecystectomy/statistics & numerical data* ; Middle Aged ; Risk Factors ; Aged ; Adult ; Neoplasms/etiology* ; Stomach Neoplasms/epidemiology*

ObjectiveTo investigate the impact of preoperative frailty on the prognosis of patients with pancreatic cancer who underwent pancreaticoduodenectomy. MethodsA retrospective analysis was conducted on the clinical data of 435 pancreatic cancer patients who underwent pancreaticoduodenectomy at Sun Yat-sen Memorial Hospital of Sun Yat-sen University. Preoperative frailty was assessed using the FRAIL questionnaire. Binary logistics regression analysis was employed to identify factors influencing frailty， and Cox regression analysis was used to evaluate the effect of frailty on survival. According to the demographic characteristics， subgroup analyses were performed on the effect of frailty on prognosis of patients with pancreatic cancer with pancreaticoduodenectomy. ResultsAmong the 435 patients enrolled， 119 （27.4%） exhibited frailty， while 316 （72.6%） did not. Significant differences were observed between the two groups in various clinical parameters， including age， body mass index， American Society of Anesthesiologists （ASA） score， postoperative red blood cell transfusion， postoperative abdominal abscess， serum levels of glycoantigens 199， glycoantigens 125， and alpha fetoprotein， leukocyte count， neutrophil， high density lipoprotein （HDL） level， and pain intensity （P＜0.05）. Advanced age and an ASA score of Ⅲ were identified as risk factors for frailty， whereas HDL level was a protective factor. Non-frail patients had better postoperative survival times than frail patients. HDL was determined to be an independent protective factor for prognosis， while LDL was an independent risk factor. ConclusionsThis study demonstrates that preoperative frailty is a significant predictor of poor prognosis in pancreatic cancer patients who underwent pancreaticoduodenectomy.These findings suggest that preoperative frailty assessment and targeted interventions to improve nutritional and metabolic status could potentially enhance postoperative survival and quality of life in pancreatic cancer patients.

BACKGROUND: Arsenic trioxide (ATO) is indicated as a broad-spectrum medicine for a variety of diseases, including cancer and cardiac disease. While the role of ATO in hepatic ischemia/reperfusion injury (HIRI) has not been reported. Thus, the purpose of this study was to identify the effects of ATO on HIRI. METHODS: In the present study, we established a 70% hepatic warm I/R injury and partial hepatectomy (30% resection) animal models in vivo and hepatocytes anoxia/reoxygenation (A/R) models in vitro with ATO pretreatment and further assessed liver function by histopathologic changes, enzyme-linked immunosorbent assay, cell counting kit-8, and terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling (TUNEL) assay. Small interfering RNA (siRNA) for extracellular signal-regulated kinase (ERK) 1/2 was transfected to evaluate the role of ERK1/2 pathway during HIRI, followed by ATO pretreatment. The dynamic process of autophagic flux and numbers of autophagosomes were detected by green fluorescent protein-monomeric red fluorescent protein-LC3 (GFP-mRFP-LC3) staining and transmission electron microscopy. RESULTS: A low dose of ATO (0.75 μmol/L in vitro and 1 mg/kg in vivo ) significantly reduced tissue necrosis, inflammatory infiltration, and hepatocyte apoptosis during the process of hepatic I/R. Meanwhile, ATO obviously promoted the ability of cell proliferation and liver regeneration. Mechanistically, in vitro  studies have shown that nontoxic concentrations of ATO can activate both ERK and phosphoinositide 3-kinase-serine/threonine kinase (PI3K-AKT) pathways and further induce autophagy. The hepatoprotective mechanism of ATO, at least in part, relies on the effects of ATO on the activation of autophagy, which is ERK-dependent. CONCLUSION Low, non-toxic doses of ATO can activate ERK/PI3K-AKT pathways and induce ERK-dependent autophagy in hepatocytes, protecting liver against I/R injury and accelerating hepatocyte regeneration after partial hepatectomy.
Animals ; Arsenic Trioxide ; Autophagy/physiology* ; Reperfusion Injury/prevention & control* ; Mice ; Male ; Proto-Oncogene Proteins c-akt/physiology* ; Arsenicals/therapeutic use* ; Oxides/therapeutic use* ; Liver/metabolism* ; Extracellular Signal-Regulated MAP Kinases/metabolism* ; Mice, Inbred C57BL

With the emergence of deep learning techniques based on convolutional neural networks, artificial intelligence (AI) has driven transformative developments in the field of medical image analysis. Recently, large language models (LLMs) such as ChatGPT have also started to achieve distinction in this domain. Increasing research shows the undeniable role of AI in reshaping various aspects of medical image analysis, including processes such as image enhancement, segmentation, detection in image preprocessing, and postprocessing related to medical diagnosis and prognosis in clinical settings. However, despite the significant progress in AI research, studies investigating the recent advances in AI technology in the aforementioned aspects, the changes in research hotspot trajectories, and the performance of studies in addressing key clinical challenges in this field are limited. This article provides an overview of recent advances in AI for medical image analysis and discusses the methodological profiles, advantages, disadvantages, and future trends of AI technologies.
Artificial Intelligence ; Humans ; Image Processing, Computer-Assisted/methods* ; Neural Networks, Computer ; Deep Learning ; Diagnostic Imaging/methods*

Objective:To investigate the use of earplugs among noise-exposed workers (Homo sapiens) in Bao'an District, Shenzhen, measure the personal attenuation rating (PAR) of earplugs when wearing earplugs, (Homo sapiens), analyze factors influencing the protective effect of earplugs, and evaluate the role of targeted wearing interventions in improving protective efficacy.Methods:From December 2022 to January 2023, 220 workers in noise-exposed positions from 3 enterprises in Bao'an District, Shenzhen were selected as subjects using the convenience sampling method. The Personal Attenuation Rating (PAR) values of workers wearing earplugs were measured using a fit testing system. Combined with the results of a questionnaire survey, the individual differences in workers' baseline PAR were described. A multivariate logistic regression model was used to analyze the influencing factors for earplugs to achieve the protective effect. One-on-one wearing interventions were implemented for workers who failed to achieve the protective effect, and repeated PAR tests were conducted. The changes in PAR of 120 workers before and after the intervention were compared.Results:The median baseline PAR for 220 workers was 7 (0, 14) dB, and the intervention rate was 54.55% (120/220). There were differences in the baseline PAR of workers with different length of service, earplugs wearing time and experience, daily noise exposure time and intensity, training and the comfort of earplug use ( P<0.05). The results of multivariate regression analysis showed that workers The comfort with earplugs wearing ( OR=2.81, 95% CI: 1.49~5.33, P<0.01) and training ( OR=6.60, 95% CI: 1.70~25.63, P<0.05) were the influencing factors of achieving the protective requirement. The median PAR was increased to 13 (11, 16) dB after intervention. Conclusion:The baseline protective effect of earplugs worn by workers is significantly influenced by comfort and enterprise training. One-on-one interventions can effectively improve the protective efficacy of those who fail to meet the requirements.