ObjectiveTo establish an ultra-performance liquid fingerprint and multi-components determination method for Naomaili granules. To evaluate the quality of different batches by chemometrics， and the anti-neuroinflammatory effects of water extract and main components of Naomaili granules were tested in vitro. MethodsThe similarity and common peaks of 27 batches of Naomaili granules were evaluated by using Ultra performance liquid chromatography （UPLC） fingerprint detection. Ultra-performance liquid chromatography-tandem mass spectrometry （UPLC-MS/MS） technology was used to determine the content of the index components in Naomaili granules and to evaluate the quality of different batches of Naomaili granules by chemometrics. LPS-induced BV-2 cell inflammation model was used to investigate the anti-neuroinflammatory effects of the water extract and main components of Naomaili granules. ResultsThe similarity of fingerprints of 27 batches of samples was > 0.90. A total of 32 common peaks were calibrated， and 23 of them were identified and assigned. In 27 batches of Naomaili granules， the mass fractions of 14 components that were stachydrine hydrochloride， leonurine hydrochloride， calycosin-7-O-glucoside， calycosin，tanshinoneⅠ， cryptotanshinone， tanshinoneⅡ_A， ginsenoside Rb₁， notoginsenoside R₁， ginsenoside Rg₁， paeoniflorin， albiflorin， lactiflorin， and salvianolic acid B were found to be 2.902-3.498， 0.233-0.343， 0.111-0.301， 0.07-0.152， 0.136-0.228， 0.195-0.390， 0.324-0.482， 1.056-1.435， 0.271-0.397， 1.318-1.649， 3.038-4.059， 2.263-3.455， 0.152-0.232， 2.931-3.991 mg∙g^-1， respectively. Multivariate statistical analysis showed that paeoniflorin， ginsenoside Rg₁， ginsenoside Rb₁ and staphylline hydrochloride were quality difference markers to control the stability of the preparation. The results of bioactive experiment showed that the water extract of Naomaili granules and the eight main components with high content in the prescription had a dose-dependent inhibitory effect on the release of NO in the cell supernatant. Among them， salvianolic acid B and ginsenoside Rb₁ had strong anti-inflammatory activity， with IC₅₀ values of （36.11±0.15） mg∙L^-1 and （27.24±0.54） mg∙L^-1， respectively. ConclusionThe quality evaluation method of Naomaili granules established in this study was accurate and reproducible. Four quality difference markers were screened out， and eight key pharmacodynamic substances of Naomaili granules against neuroinflammation were screened out by in vitro cell experiments.

Objective: To understand the serum vitamin D and vitamin K 1 levels of children in the Qingdao area, so as to provide scientific grounds for appropriate vitamin supplementation. Methods: A total of 4 469 children aged 0-14 years old, who attended the children s healthcare outpatient clinics of a tertiary hospital in Qingdao, were enrolled in the current study between January 2023 and July 2024. The levels of vitamin D and vitamin K 1 were measured by liquid chromatography tandem mass spectrometry. The inter group differences were analyzed using Chi square test, Wilcoxon rank sum test, and Kruskal-Wallis H test. The correlation analysis of vitamin D and vitamin K 1 levels with age was performed using the Spearman correlation. Results: The serum vitamin D level among children was 28.72(22.67, 36.26)ng/mL. The vitamin D deficiency and insufficiency rates were 2.10% and 14.59 %, respectively. The serum 25-(OH)D 2 level was 0.29(0.14, 0.53)ng/mL, the serum 25-(OH)D 3 level was 27.99( 21.78 , 35.57)ng/mL and the serum vitamin K 1 level was 0.54(0.29, 1.04)ng/mL. The vitamin K 1 deficiency rate was 13.76%. Among different age stages, the serum vitamin D level was highest in infancy [37.45(30.39, 43.87)ng/mL] and lowest in school age children [22.39(18.00, 26.97)ng/mL]; the level of vitamin K 1 was highest in preschool children [0.79(0.41, 1.51) ng/mL] and lowest in school age children[0.45 (0.26, 0.76) ng/mL]; the serum vitamin D deficiency and insufficiency rates were highest in school age children (5.03% and 30.81%); the vitamin K 1 deficiency rate was highest in infancy (21.53%) ( H/χ 2=1 698.31, 253.70 , 137.85 , 583.79, 89.30, all P <0.05). Among different seasons, the serum vitamin D and vitamin K 1 levels were lowest in the winter [26.74(18.37, 35.86) and 0.50 (0.27, 0.94)ng/mL; H =50.71, 7.86]; the vitamin D deficiency and insufficiency rates were highest in the winter (5.41% and 24.80%; χ 2=59.93, 83.35) (all P <0.05). The serum vitamin D level had a moderate negative correlation with age ( r =-0.62), and there was a low positive correlation between the serum vitamin D and vitamin K 1 levels in infancy and early childhood ( r =0.21, 0.26) (all P <0.05). Conclusions The serum vitamin D and vitamin K 1 levels are lowest in school age children and in the winter, and the serum vitamin K 1 deficiency rate is highest in infancy. There is a need to focus on critical periods of infancy and school age, and strengthen interventions during the high risk winter season. The nutritional status of vitamin D and vitamin K 1 in children should be enhanced.

Objective To systematically analyze the spatiotemporal distribution characteristics and epidemiological trends of tracheal, bronchus, and lung cancer (TBL) disease burden attributed to air pollution globally and in China and the United States from 1990 to 2021, and to assess the patterns of disease burden changes from 2022 to 2031 based on predictive models, providing a scientific basis for formulating targeted TBL prevention and control strategies. Methods Based on the Global Burden of Disease (GBD) 2021 database, we analyzed the disease burden data of TBL attributed to air pollution globally and in China and the United States from 1990 to 2021. R Studio 4.3.2 software was used to analyze the corresponding trends and the Bayesian age-period-cohort (BAPC) prediction model was used to predict the status of the disease burden of TBL attributed to air pollution in the world and in China and the United States from 2022 to 2031. Results In 2021, China had the highest number of deaths and disability-adjusted life years attributed to air pollution (211 400 patients and 4.8947 million person-years), followed by the United States (6 000 patients and 124 300 person-years). The age-standardized mortality rate (ASMR) and age-standardized disability-adjusted life years rate (ASDR) of TBL due to air pollution in the world and in China and the United States showed a decreasing trend. From 1990 to 2021, the ASMR and ASDR of TBL in China due to air pollution were much higher than those in the United States and the global average. In terms of gender, from 1990 to 2021, the disease burden of male patients with TBL attributed to air pollution was much higher than that of female patients. The BAPC prediction model showed that from 2022 to 2031, the ASMR and ASDR of TBL attributed to air pollution showed an upward trend globally, while they showed a downward trend in China and the United States. Conclusion Over the past 30 years, the air pollution-related TBL disease burden in the world and in China and the United States has continued to decline, but China's disease burden is still significantly higher than the global average. The disease burden in men far exceeds that in women, with men and the population aged ≥50 years being high-risk groups. In the future, the global disease trend may reverse and rise, while China and the United States are expected to continuously decline. However, precise prevention and control for high-risk groups remains a key challenge.

ObjectiveThis paper aims to investigate and evaluate the staged efficacy and safety of the representative empirical prescription of the “Zhu Ke Jiao” theory， Qijia Rougan prescription， combined with entecavir in the treatment of hepatic fibrosis in chronic hepatitis B. MethodsA multicenter randomized controlled clinical study was conducted， and 101 patients diagnosed with chronic hepatitis B-related hepatic fibrosis （CHB-HF） who met the diagnosis and inclusion criteria were randomly assigned to an observation group （Qijia Rougan prescription + entecavir） and a control group （entecavir）. The treatment duration was 24 weeks. Liver stiffness measurement （LSM）， fibrosis-4 index （FIB-4）， portal vein diameter， hepatitis B serology， biochemical indicators， hepatic fibrosis markers in serum ［hyaluronic acid （HA）， laminin （LN）， procollagen Ⅲ peptide （PⅢP）， and type Ⅳ collagen （Ⅳ-C）］， and traditional Chinese medicine syndrome scores were used as efficacy evaluation indicators. Efficacy assessments and explorations of different staged subgroups of Qijia Rougan prescription were conducted according to LSM values based on the Metavir pathological staging standard. ResultsA total of 98 cases were included for statistical analysis， with 49 cases in the observation group and 49 in the control group. The general data of the patients in both groups were comparable. Compared with the same group before treatment， the observation group showed a significant reduction in LSM and FIB-4 （P<0.01）， as well as notable improvements in LN， Ⅳ-C， and various TCM syndrome scores （P<0.05， P<0.01）. When compared to the control group after treatment， the observation group demonstrated significant improvements in LSM， FIB-4， and various TCM syndrome score indicators （P<0.05， P<0.01）， indicating that the observation group performed better than the control group. Subgroup analysis of the regression of hepatic fibrosis stages showed that compared to the same group before treatment， the observation group had better improvement in regression of stages F2 and F3 （P<0.05）. When compared to the control group after treatment， the observation group exhibited superior improvement in regression of stage F3 （P<0.05）. No adverse events occurred in either group during the treatment period. ConclusionCompared with entecavir alone， the combination of Qijia Rougan prescription and entecavir significantly improves the degree of hepatic fibrosis and clinical TCM symptoms in patients. The optimal intervention period is primarily during stage F3， which is a potential “interception” point of the “Zhu Ke Jiao” theory.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

Background: s/Aims: Non-invasive models stratifying clinically significant portal hypertension (CSPH) are limited. Herein, we developed a new non-invasive model for predicting CSPH in patients with compensated cirrhosis and investigated whether carvedilol can prevent hepatic decompensation in patients with high-risk CSPH stratified using the new model. Methods: Non-invasive risk factors of CSPH were identified via systematic review and meta-analysis of studies involving patients with hepatic venous pressure gradient (HVPG). A new non-invasive model was validated for various performance aspects in three cohorts, i.e., a multicenter HVPG cohort, a follow-up cohort, and a carvediloltreating cohort. Results: In the meta-analysis with six studies (n=819), liver stiffness measurement and platelet count were identified as independent risk factors for CSPH and were used to develop the new “CSPH risk” model. In the HVPG cohort (n=151), the new model accurately predicted CSPH with cutoff values of 0 and –0.68 for ruling in and out CSPH, respectively. In the follow-up cohort (n=1,102), the cumulative incidences of decompensation events significantly differed using the cutoff values of <–0.68 (low-risk), –0.68 to 0 (medium-risk), and >0 (high-risk). In the carvediloltreated cohort, patients with high-risk CSPH treated with carvedilol (n=81) had lower rates of decompensation events than non-selective beta-blockers untreated patients with high-risk CSPH (n=613 before propensity score matching [PSM], n=162 after PSM). Conclusions Treatment with carvedilol significantly reduces the risk of hepatic decompensation in patients with high-risk CSPH stratified by the new model.

Soil cadmium pollution can adversely affect the cultivation of the ornamental plant, Coleus scutellarioides. Upon cadmium contamination of the soil, the growth of C. scutellarioides is impeded, and it may even succumb to the toxic accumulation of cadmium. In this study, we investigated the effects of arbuscular mycorrhizal fungi (AMF) on the adaptation of C. scutellarioides to cadmium stress, by measuring the physiological metabolism and the degree of root damage of C. scutellarioides, with Aspergillus oryzae as the test fungi. The results indicated that cadmium stress increased the activity of superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT), and the content of malondialdehyde (MDA) and proline (Pro) within the cells of C. scutellarioides, but inhibited mycorrhizal infestation rate, root vigour and growth rate to a great degree. With the same cadmium concentration, the inoculation of AMF significantly improved the physiological indexes of C. scutellarioides. The maximum decrease of MDA content was 42.16%, and the content of secondary metabolites rosemarinic acid and anthocyanosides could be increased by up to 27.43% and 25.72%, respectively. Meanwhile, the increase of root vigour was as high as 35.35%, and the DNA damage of the root system was obviously repaired. In conclusion, the inoculation of AMF can promote the accumulation of secondary metabolites, alleviate root damage, and enhance the tolerance to cadmium stress in C. scutellarioides.
Cadmium/toxicity* ; Mycorrhizae/physiology* ; Plant Roots/drug effects* ; Soil Pollutants/toxicity* ; Stress, Physiological ; Superoxide Dismutase/metabolism*

Rice (Oryza sativa L.), as a thermophilic crop, is highly susceptible to cold stress during its growth process. Chilling injury at the plumule stage and seedling stage often affects the morphological development and leads to yield reduction of rice. The exploration and utilization of cold tolerance genes are among the most direct and effective approaches to address cold stress in rice. To identify quantitative trait loci (QTLs) associated with cold tolerance at plumule and seedling stages, in this study, we measured the seedling rates and survived seedling rates of the indica rice cultivar 'HZ', the japonica cultivar 'Nekken2', and their 120 recombinant inbred lines (RILs) under cold stress. A previously constructed high-density genetic linkage map was used for the mapping of the QTLs conferring cold tolerance at the plumule and seedling stages. A total of 4 QTLs for plumule-stage cold tolerance and 9 QTLs for seedling-stage cold tolerance were detected, with the maximum limit of detection reaching 5.20. Notably, a genetically overlapping QTL for both plumule and seedling stages was identified on chromosome 8, spanning a physical interval of 24 432 953-25 295 129 bp. Candidate genes within the detected QTL intervals were screened, and quantitative real-time polymerase chain reaction (qRT-PCR) was conducted to analyze the gene expression during the plumule and seedling stages. The results revealed that LOC_Os03g06570, LOC_Os03g07100, LOC_Os06g08280, LOC_Os08g38440, LOC_Os08g39100, and LOC_Os08g39540 exhibited significantly differential expression between the parental lines. These genes were either significantly downregulated or upregulated under cold stress. Among them, the first three gene (LOC_Os03g06570, LOC_Os03g07100, and LOC_Os06g08280) were hypothesized to be key candidates regulating the cold tolerance of rice seedlings, while the latter three genes (LOC_Os08g38440, LOC_Os08g39100, and LOC_Os08g39540) were identified as comprehensive regulators of cold tolerance during both plumule and seedling stages. These findings lay a foundation for the fine mapping and cloning of cold tolerance genes at the plumule and seedling stages, providing valuable insights for breeding cold-tolerant rice varieties.
Quantitative Trait Loci/genetics* ; Oryza/growth & development* ; Seedlings/growth & development* ; Cold Temperature ; Chromosome Mapping ; Gene Expression Regulation, Plant

Liver diseases are a group of complex clinical conditions caused by various factors and can lead to hepatocyte damage and liver dysfunction， posing a serious threat to human health. The cyclic GMP-AMP synthase （cGAS）-stimulator of interferon genes （STING） signaling pathway plays a key regulatory role in the course of liver diseases and is involved in the development， progression， and treatment of various diseases such as viral hepatitis， nonalcoholic fatty liver disease， liver fibrosis， and liver cancer. This article reviews the regulatory mechanisms of the cGAS-STING signaling pathway in processes such as inflammation， autophagy， antiviral response， and oxidative stress， analyzes its molecular function in liver diseases， and explores its application prospect as a potential target for the treatment of liver diseases， in order to provide a theoretical basis for developing novel therapeutic strategies for liver diseases.