Objective:To investigate the relationship between the level of angiotensin Ⅱ type 1 receptor autoantibody (AT1-AA) in the uterine fluid and the thickness of endometrium in infertile women with chronic endometritis.Methods:A case-control study was conducted to select 122 patients who underwent hysteroscopy and endometrial tissue biopsy at Assisted Reproduction Center, Taiyuan Central Hospital due to infertility from March 2023 to January 2024 as the study subjects. According to the results of hysteroscopy and endometrial tissue biopsy, the patients were divided into 52 cases in the infertility group with normal endometrium (NE infertility group) and the chronic endometritis combined with infertility group (CE infertility group) with 70 cases. Enzyme-linked immunosorbent assay was used to detect the level of AT1-AA in uterine fluid of the two groups. General clinical data, AT1-AA absorbance value of uterine fluid and uterine related indexes of the two groups were analyzed, and the correlations between AT1-AA level and the variation of indexes were analyzed.Results:Gravidity (median: 1 vs 1; Z=7.029, P=0.030) and parity (median: 0 vs 0; Z=12.258, P=0.002) in CE infertility group were higher than those in NE infertility group. There was AT1-AA in the uterine fluid, and the level of AT1-AA in CE infertility group was significantly higher than that in NE infertility group (median: 2.07 vs 1.44; Z=3.099, P=0.029). The endometrial thickness of CE infertility group was lower than that of NE infertility group (median: 6.0 vs 7.0 mm; Z=-2.179, P=0.029), and there were no statistical differences in other indexes between the two groups (all P>0.05). Further correlation analysis showed that there were no correlation between the level of AT1-AA in uterine fluid and parity, endometrial thickness, gravidity in NE infertility group (all P>0.05). However, the level of AT1-AA in uterine fluid of CE infertility group was positively correlated with parity (Spearman′s r=0.339, P=0.004), and negatively correlated with endometrial thickness (Spearman′s r=-0.499, P<0.001), but not correlated with gravidity ( P>0.05). Conclusions:AT1-AA is present in the uterine fluid of infertile women. The elevated level of AT1-AA in uterine fluid of infertile women with CE is related to the thinning of the endometrium.

Objective To investigate the impact of eccentric placement for various types of artificial aortic valves on downstream flow dynamics.Methods A physiological pulsatile circulation simulation system was employed and particle image velocimetry(PIV)was utilized to analyze the downstream flow field variations for bioprosthetic and mechanical valves under two placement conditions:centralized placement(0 mm)and eccentric placement(1 mm).Hemodynamic parameters such as velocity,vorticity,and viscous shear stress were assessed to evaluate the flow field characteristics.Results By analyzing the flow field variations at four characteristic time points,namely,early systole,acceleration phase,peak systole,and deceleration phase,a significant difference in flow field distribution between bioprosthetic and mechanical valves was observed.The bioprosthetic valve exhibited a centrally symmetric jet with a higher flow velocity,whereas the mechanical valve displayed a three-jet structure with a lower central flow velocity.Under eccentric placement,the blood flow in the aortic sinus region was sluggish,with a reduction in average velocity,hindering the formation and maintenance of vortices.During the peak systolic phase,the maximum viscous shear stresses in the sinus region for the bioprosthetic and mechanical valves were 0.45 and 0.67 Pa,respectively,approaching the threshold for endothelial cell damage.Conclusions Eccentric placement of both mechanical and bioprosthetic valves resulted in reduced sinus blood flow velocity and diminished viscous shear stress,creating favorable conditions for thrombus formation.In clinical practice,careful attention should be given to the placement of valve replacement to prevent eccentric placement.

Objective To evaluate the application of ELISA randomized quality control,and continuously improve the laboratory testing capacity and quality assurance,in order to gradually improve the application of randomized quality control to the daily testing of ELISA.Methods Collected the quality control data of KEHUA HBsAg,compared the difference between randomized quality control data and immobilized quality control data.Group comparison of randomization quality control between rows and columns.The randomized quality control data were analyzed retrospectively and the quality control chart was established by using the randomized quality control data.Analyzed and compared the lost-control situation of randomized quality control and immobilized quality control.Results Randomized quality control S/CO value(2.831±0.343)and immobilized quality control S/CO value(2.651±0.260)in the same microplate,the difference between two was statistically significant(t=5.970,P＜0.05).The differences between randomized quality control and immobilized quality control in columns 2 to 8 were statistically significant(t=2.285～5.536,all P<0.05).There were no statistically significant differences between randomized quality control and immobilized quality control in column 9 to 12(t=0.031～1.605,all P>0.05).There was no statistically significant difference in randomization quality control among all lines(F=0.858,P＞0.05).The randomized quality control data was used to establish a quality control chart.Within the time range of the collected data,the randomized quality control was out of control for 6 times,all were greater than+3s,and the loss of control rate was 4.72%(6/127).Fixed position quality control lost control 9 times during the same period,all of which were greater than+3s,with a loss of control rate of 0.61%(9/1 481).Conclusion The randomized quality control has a greater possibility to reflect the factors affecting all the samples on the microporous plate.Random quality control can be used to find possible systematic errors in testing.Randomized quality control can gradually be fully applied to daily indoor quality control,but the loss of control rate and coefficient of variation may increase.

Objective To explore the impact of different moving patterns during the dip-coating process on thickness distributions of polymer heart valves.Methods Based on the volume of fluid(VOF)multiphase flow model,the Eulerian wall-film(EWF)model,and dynamic mesh technology,the dip-coating manufacturing process of polymer heart valves were numerically simulated.The effects of vertical,horizontal,and circular moving patterns on flow characteristics of the surface impregnation liquid and liquid film distributions under self-rotation conditions of the models were mainly studied.Subsequently,seven identical test points were set on each valve leaflet to collect thickness data,and the coefficient of variation(CV)was calculated to evaluate the uniformity of the liquid film thickness.Given that the vertical and horizontal patterns had fewer moving planes,limiting the optimization space,the circular pattern(45°)with richer moving planes was selected as the basis for optimization,and comparative analysis of numerical simulation was conducted.Results In the vertical pattern,the peak CV was 0.461 3;in the horizontal pattern,the CV was 0.060 8;and in the circular pattern,the CV at 30°,45° and 60° were 0.457 5,0.272 8,and 0.255 6,respectively.After optimization,the CV for the circular pattern(45°)decreased to 0.052 5,representing an 80.7％reduction compared to the pre-optimization value.Conclusions The moving patterns significantly affect the uniformity of dip-coating thickness distributions.The horizontal pattern demonstrates the best uniformity,while the vertical pattern shows the poorest uniformity.The CV for the circular pattern decreases as the angle increases,with its uniformity between that of the vertical and horizontal patterns.Optimization of moving pattern parameters based on simulation results has improved the uniformity of thickness distributions.

Objective:To investigate the relationship between the level of angiotensin Ⅱ type 1 receptor autoantibody (AT1-AA) in the uterine fluid and the thickness of endometrium in infertile women with chronic endometritis.Methods:A case-control study was conducted to select 122 patients who underwent hysteroscopy and endometrial tissue biopsy at Assisted Reproduction Center, Taiyuan Central Hospital due to infertility from March 2023 to January 2024 as the study subjects. According to the results of hysteroscopy and endometrial tissue biopsy, the patients were divided into 52 cases in the infertility group with normal endometrium (NE infertility group) and the chronic endometritis combined with infertility group (CE infertility group) with 70 cases. Enzyme-linked immunosorbent assay was used to detect the level of AT1-AA in uterine fluid of the two groups. General clinical data, AT1-AA absorbance value of uterine fluid and uterine related indexes of the two groups were analyzed, and the correlations between AT1-AA level and the variation of indexes were analyzed.Results:Gravidity (median: 1 vs 1; Z=7.029, P=0.030) and parity (median: 0 vs 0; Z=12.258, P=0.002) in CE infertility group were higher than those in NE infertility group. There was AT1-AA in the uterine fluid, and the level of AT1-AA in CE infertility group was significantly higher than that in NE infertility group (median: 2.07 vs 1.44; Z=3.099, P=0.029). The endometrial thickness of CE infertility group was lower than that of NE infertility group (median: 6.0 vs 7.0 mm; Z=-2.179, P=0.029), and there were no statistical differences in other indexes between the two groups (all P>0.05). Further correlation analysis showed that there were no correlation between the level of AT1-AA in uterine fluid and parity, endometrial thickness, gravidity in NE infertility group (all P>0.05). However, the level of AT1-AA in uterine fluid of CE infertility group was positively correlated with parity (Spearman′s r=0.339, P=0.004), and negatively correlated with endometrial thickness (Spearman′s r=-0.499, P<0.001), but not correlated with gravidity ( P>0.05). Conclusions:AT1-AA is present in the uterine fluid of infertile women. The elevated level of AT1-AA in uterine fluid of infertile women with CE is related to the thinning of the endometrium.

Objective To evaluate the application of ELISA randomized quality control,and continuously improve the laboratory testing capacity and quality assurance,in order to gradually improve the application of randomized quality control to the daily testing of ELISA.Methods Collected the quality control data of KEHUA HBsAg,compared the difference between randomized quality control data and immobilized quality control data.Group comparison of randomization quality control between rows and columns.The randomized quality control data were analyzed retrospectively and the quality control chart was established by using the randomized quality control data.Analyzed and compared the lost-control situation of randomized quality control and immobilized quality control.Results Randomized quality control S/CO value(2.831±0.343)and immobilized quality control S/CO value(2.651±0.260)in the same microplate,the difference between two was statistically significant(t=5.970,P＜0.05).The differences between randomized quality control and immobilized quality control in columns 2 to 8 were statistically significant(t=2.285～5.536,all P<0.05).There were no statistically significant differences between randomized quality control and immobilized quality control in column 9 to 12(t=0.031～1.605,all P>0.05).There was no statistically significant difference in randomization quality control among all lines(F=0.858,P＞0.05).The randomized quality control data was used to establish a quality control chart.Within the time range of the collected data,the randomized quality control was out of control for 6 times,all were greater than+3s,and the loss of control rate was 4.72%(6/127).Fixed position quality control lost control 9 times during the same period,all of which were greater than+3s,with a loss of control rate of 0.61%(9/1 481).Conclusion The randomized quality control has a greater possibility to reflect the factors affecting all the samples on the microporous plate.Random quality control can be used to find possible systematic errors in testing.Randomized quality control can gradually be fully applied to daily indoor quality control,but the loss of control rate and coefficient of variation may increase.

Objective To explore the impact of different moving patterns during the dip-coating process on thickness distributions of polymer heart valves.Methods Based on the volume of fluid(VOF)multiphase flow model,the Eulerian wall-film(EWF)model,and dynamic mesh technology,the dip-coating manufacturing process of polymer heart valves were numerically simulated.The effects of vertical,horizontal,and circular moving patterns on flow characteristics of the surface impregnation liquid and liquid film distributions under self-rotation conditions of the models were mainly studied.Subsequently,seven identical test points were set on each valve leaflet to collect thickness data,and the coefficient of variation(CV)was calculated to evaluate the uniformity of the liquid film thickness.Given that the vertical and horizontal patterns had fewer moving planes,limiting the optimization space,the circular pattern(45°)with richer moving planes was selected as the basis for optimization,and comparative analysis of numerical simulation was conducted.Results In the vertical pattern,the peak CV was 0.461 3;in the horizontal pattern,the CV was 0.060 8;and in the circular pattern,the CV at 30°,45° and 60° were 0.457 5,0.272 8,and 0.255 6,respectively.After optimization,the CV for the circular pattern(45°)decreased to 0.052 5,representing an 80.7％reduction compared to the pre-optimization value.Conclusions The moving patterns significantly affect the uniformity of dip-coating thickness distributions.The horizontal pattern demonstrates the best uniformity,while the vertical pattern shows the poorest uniformity.The CV for the circular pattern decreases as the angle increases,with its uniformity between that of the vertical and horizontal patterns.Optimization of moving pattern parameters based on simulation results has improved the uniformity of thickness distributions.

Objective To investigate the impact of eccentric placement for various types of artificial aortic valves on downstream flow dynamics.Methods A physiological pulsatile circulation simulation system was employed and particle image velocimetry(PIV)was utilized to analyze the downstream flow field variations for bioprosthetic and mechanical valves under two placement conditions:centralized placement(0 mm)and eccentric placement(1 mm).Hemodynamic parameters such as velocity,vorticity,and viscous shear stress were assessed to evaluate the flow field characteristics.Results By analyzing the flow field variations at four characteristic time points,namely,early systole,acceleration phase,peak systole,and deceleration phase,a significant difference in flow field distribution between bioprosthetic and mechanical valves was observed.The bioprosthetic valve exhibited a centrally symmetric jet with a higher flow velocity,whereas the mechanical valve displayed a three-jet structure with a lower central flow velocity.Under eccentric placement,the blood flow in the aortic sinus region was sluggish,with a reduction in average velocity,hindering the formation and maintenance of vortices.During the peak systolic phase,the maximum viscous shear stresses in the sinus region for the bioprosthetic and mechanical valves were 0.45 and 0.67 Pa,respectively,approaching the threshold for endothelial cell damage.Conclusions Eccentric placement of both mechanical and bioprosthetic valves resulted in reduced sinus blood flow velocity and diminished viscous shear stress,creating favorable conditions for thrombus formation.In clinical practice,careful attention should be given to the placement of valve replacement to prevent eccentric placement.

Objective To study and compare the clinical effects of cervical pessary and progesterone for preventing preterm birth in singleton pregnant women with a short cervical length(CL).Methods This study was a prospective cohort study.A total of 148 pregnant women with CL≤25 mm,as determined by ultrasound examination performed before 28 weeks of pregnancy,were included in the study.All subjects were admitted to West China Second Hospital,Sichuan University between August 2020 and December 2022.According to their treatment plans,the pregnant women were divided into a cervical pessary group(n=55)and a progesterone group(n=93).Spontaneous preterm birth before 37 weeks of pregnancy was defined as the main outcome index.Preterm birth(abortion)or spontaneous preterm birth(abortion)before 37,34,32,30,and 28 weeks of pregnancy,mean extended gestational age,neonatal morbidity,and neonatal mortality were the secondary outcome indicators.The pregnancy outcomes and the neonatal outcomes of the two groups were compared and statistically analyzed.Results There was no statistically significant difference in the incidence of preterm birth(including iatrogenic preterm birth,spontaneous preterm birth,and abortion)before 37,34,32,30,and 28 weeks between the cervical pessary group and the progesterone group.When iatrogenic preterm birth was excluded,the incidence of spontaneous preterm birth before 37 weeks was lower in the cervical pessary group(23.6%)than that in the progesterone group(41.9%),with the difference between the two groups being statistically significant(P=0.024).There was no statistically significant difference in the incidence of spontaneous preterm birth(including miscarriage)before 34,32,30,and 28 weeks.There was no statistically significant difference in the incidence of neonatal morbidity,the rate of transfer to the neonatal care unit after birth,and the neonatal mortality rate between the two groups.Multivariate logistic analysis showed that treatment with cervical pessary was a protective factor for spontaneous preterm birth before 37 weeks compared to progesterone therapy.Conclusion Using cervical pessary to prevent spontaneous preterm birth in singleton pregnant women with a short cervical length in the second trimester can significantly reduce the incidence of spontaneous preterm birth before 37 weeks.

Objective:To investigate the presence of angiotensin Ⅱ type 1 receptor autoantibodies (AT1-AA) in follicular fluid, and to investigate the correlation between AT1-AA levels and follicular development in follicular fluid of infertile patients with polycystic ovary syndrome (PCOS).Methods:A case-control study was conducted on 182 infertile patients who underwent in vitro fertilization/intracytoplasmic sperm injection and embryo transfer (IVF/ICSI-ET) at the Center for Reproductive Medicine of Taiyuan Central Hospital from June 2021 to October 2022. There were 80 cases in the fallopian tube factor group (tubal factor group) and 102 cases in PCOS infertility group (PCOS group). Univariate analysis was performed for the general data, ovulation induction indexes and embryonic laboratory indexes of the two groups. Enzyme-linked immunosorbent assay (ELISA) was used to detect the level of AT1-AA in follicular fluid on the day of oocyte retrieval. Pearson or Spearman was used to analyze the correlation between AT1-AA level and follicle development indexes, and multiple linear regression was used to adjust for interfering factors to analyze the correlation between AT1-AA level and embryonic laboratory indicators. Results:Body mass index [BMI, (25.29±3.25) kg/m 2], antral follicle count [AFC, 24.00 (17.00, 24.00)], basal serum teststerone [0.50 (0.36, 0.79) μg/L] and anti-Müllerian hormone [AMH, 4.92 (2.57, 8.28) μg/L] in PCOS group were significantly higher than those in tubal factor group [(23.01±2.92) kg/m 2, P<0.001; 15.00 (10.25, 19.00), P<0.001; 0.38 (0.20, 0.59) μg/L, P=0.019; 3.06 (2.19, 4.89) μg/L, P=0.006]. Moreover, the AT1-AA P/N value in follicular fluid in PCOS group [4.24 (2.07, 8.89)] was significantly higher than that in tubal factor group [2.96 (1.86, 4.84), P=0.027]. In addition, the age of menarche in PCOS group [13.00 (12.00, 14.00) years] was earlier than that in tubal factor group [14.00 (13.00, 15.00) years, P=0.007]. Prolactin level [12.09 (9.65, 16.64) μg/L] was lower than that of tubal factor group [16.27 (12.86, 20.94) μg/L, P=0.002], and there were no statistical differences in other indexes between the two groups (all P>0.05). Correlation analysis showed that the level of AT1-AA in follicular fluid of PCOS patients was negatively correlated with oocyte retrieval rate ( r=-0.159, P=0.019). The results of multiple linear regression analysis showed that AT1-AA level in follicular fluid was negatively correlated with oocyte retrieval rate ( β=-0.598, P=0.028) and normal fertilization rate ( β=-0.527, P=0.022) after adjusting for confounding factors. Conclusion:The level of AT1-AA in follicular fluid in PCOS patients is significantly higher than that in patients with tubal infertility, and is negatively correlated with oocyte retrieval rate and normal fertilization rate.