[Objective] To evaluate the efficacy and safety of sacral neuromodulation (SNM) in the treatment of patients with benign prostatic hyperplasia (BPH) complicated with underactive bladder (UAB) who respond poorly to transurethral resection of the prostate (TURP). [Methods] A retrospective analysis was performed on 10 patients with BPH and UAB treated with TURP by the same surgeon in Zhongda Hospital Southeast University during Jan.2018 and Jan.2023.The residual urine volume was not significantly relieved after operation, and the maximum urine flow rate and urine volume per discharge were not significantly improved.All patients underwent phase I SNM, and urinary diaries were recorded before and after surgery to observe the average daily frequency of urination, volume per urination, maximum urine flow rate, and residual urine volume. [Results] The operation time was (97.6±11.2) min.During the postoperative test of 2-4 weeks, if the residual urine volume reduction by more than 50% was deemed as effective, SNM was effective in 6 patients (60.0%). Compared with preoperative results, the daily frequency of urination [(20.2±3.8) times vs. (13.2±3.2) times], volume per urination [(119.2±56.7) mL vs. (246.5±59.2) mL], maximum urine flow rate [(8.7±1.5) mL/s vs. (16.5±2.6) mL/s], and residual urine volume [(222.5±55.0) mL vs. (80.8±16.0) mL] were significantly improved, with statistical significance (P<0.05). There were no complications such as bleeding, infection, fever or pain.The 6 patients who had effective outcomes successfully completed phase II surgery, and the fistula was removed.During the follow-up of 1 year, the curative effect was stable, and there were no complications such as electrode displacement, incision infection, or pain in the irritation sites.The residual urine volume of the other 4 unsuccessful patients did not improve significantly, and the electrodes were removed and the vesicostomy tube was retained. [Conclusion] SNM is safe and effective in the treatment of BPH with UAB patients with poor curative effects after TURP.

Objective To analyze the disease burden of chronic kidney diseases (CKD) attributed to high body mass index (BMI) in China from 1992 to 2021 and predict the disease burden for the next decade, and to provide evidence for the prevention and treatment of CKD. Methods Using the Global Burden of Disease (GBD) database and the Joinpoint model, the average annual percentage rate change (AAPC) of the mortality rate and disability-adjusted life year (DALY) rate was calculated to describe and analyze the CKD disease burden attributed to high BMI in China from 1992 to 2021. The ARIMA model was employed to predict and analyze the change trend of the CKD disease burden. Results From 1992 to 2021, the mortality rate and DALY rate attributed to high BMI-induced chronic kidney disease showed an upward trend. Compared to 1992, the attributed number of deaths increased by 324.38%, and DALYs increased by 268.56%; the mortality rate increased by 64.00%, and the DALY rate grew by 51.62%. From 1992 to 2021, the mortality rate and DALY rate for males were lower than those for females, but the growth rate for males exceeded that of females. From 1992 to 2021, the mortality rate and DALY rate of chronic kidney disease attributed to high BMI in China increased with age. The average annual change rate of chronic kidney disease attributed to high BMI in China from 1992 to 2021 (mortality rate: 1.40 per 100,000 (95% CI: 1.04–1.76), DALY rate: 1.43 per 100 000 (95% CI: 1.17–1.70)) was higher than thHuaiyin Normal University, Huai'anher social demographic index (SDI) regions. The ARIMA model predicted that the age-standardized mortality rate increased from 2.91 per 100 000 in 2022 to 3.05 per 100 000 in 2026, and the age-standardized DALY rate increased from 69.65 per 100 000 in 2022 to 73.58 per 100 000 in 2026. Conclusion Chronic kidney disease attributed to high BMI in China is on the rise, and it will continue to grow in the future. The focus of CKD prevention and control should be on males and the elderly, while active measures should be taken to reduce the occurrence and progression of chronic kidney disease.

BACKGROUND:The morphological indexes of ankle point may change after ankle fracture,and there is a certain correlation between the coronal angle change of ankle point and the functional recovery of ankle joint.Most previous studies have studied the height recovery of ankle point after surgery,so the correlation between the fluctuation of coronal angle of ankle point and the functional recovery of ankle joint after ankle fracture has certain reference significance. OBJECTIVE:To investigate the effect of coronal angle change of ankle point on joint function recovery after ankle fracture. METHODS:A total of 86 patients with ankle fracture who underwent surgical treatment were selected as the study objects,and were divided into excellent group(n=45)and poor group(n=41)according to the results of American Orthopaedic Foot&Ankle Society(AOFAS)hindfoot-ankle score during the last follow-up,and the general data of the two groups were compared.The morphological indexes of ankle points on the affected side and healthy side were compared after surgery based on ankle acupoints and lateral X-rays of the ankle joint,including the width and depth of ankle points,coronal angle and sagittal angle,and the difference of ankle points between the affected side and healthy side,and further comparison and analysis were conducted in each group.A joint model was constructed and Cox regression analysis was used to evaluate the relationship between coronal angle fluctuation and joint function recovery.Least absolute shrinkage and selection operator regression method and multivariate Logistic regression were used to analyze the risk factors affecting the recovery of joint function.The patients were divided into 5-quartile array(Q1-Q5)according to the angle of coronal position at ankle point from low to high.The clinical data characteristics of the five groups were compared,and the correlation between the change of coronal position at ankle point and the risk of poor recovery of joint function was analyzed by multivariate Logistic regression.A restricted cubic spline Logistic regression model was established to analyze the dose-response relationship.The prediction model of regression equation y=1-1/(1+e-z)was established and verified. RESULTS AND CONCLUSION:(1)The width and depth of ankle point on the affected side,coronal angle and sagittal angle were significantly higher than those on the healthy side(all P<0.05),and compared with the excellent group,the difference of ankle point width,depth difference,coronal angle difference and sagittal angle difference were greater in the poor group(P<0.05).(2)The combined model showed that the risk of poor joint function was increased by 3%for every 1? increase in coronal angle,regardless of whether the angle was within the normal range.(3)Least absolute shrinkage and selection operator regression and multivariate Logistics regression analysis showed that after adjusting for potential confounding factors,it was found that age,lack of functional exercise in early stage,no calcaneal traction,failure to remove internal fixation,postoperative complications,and increased ankle coronal angle were independent risk factors for joint function recovery(P<0.05).(4)The coronal angle within 3 months after surgery was independently correlated with the risk of poor joint function recovery(OR=1.57,95%CI:1.38-1.76,P=0.002),and the trend test of the coronal angle from low to high quintile in each postoperative period had statistical significance(Ptrend<0.001).(5)Restricted cubic spline model analysis showed that there was no nonlinear relationship between the coronal angle change of ankle point and the risk of poor joint function recovery in males or females.Through Bootstrap self-sampling,the prediction model has good differentiation and accuracy.(6)The reduction of coronal angle of ankle point after ankle fracture plays a significant role in promoting the recovery of joint function.Therefore,the detection of coronal angle of ankle point after ankle fracture is helpful to understand the recovery of joint function of patients.

ObjectiveBased on analytic hierarchy process（AHP）-criteria importance through intercriteria correlation（CRITIC） hybrid weighting method， grey relational analysis and backpropagation artificial neural network（BP-ANN）， to optimize the water extraction process of Qizhi prescription， so as to provide an experimental basis for optimization of the preparation process of this prescription and the establishment of quality standards. MethodsL₉（3⁴） orthogonal test was employed， and the AHP-CRITIC hybrid weighting method was utilized to determine the weight coefficients of the quality fractions of various components， including astragaloside Ⅳ， polygalaxanthone Ⅲ， calycosin-7-O-β-D-glucoside， tenuifolin， and 3，6′-disinapoylsucrose， as well as the dry extract yield. The comprehensive score of each factor level combination in the orthogonal test were calculated as evaluation indicator to select the optimal extraction process parameters. The effects of extraction times， extraction time， and solvent dosage on the aqueous extraction process of the formula were investigated through intuitive analysis， variance analysis， and grey relational analysis. Meanwhile， a BP-ANN model was established to reverse-predict the optimal extraction process parameters of Qizhi prescription， and the optimized process parameters were validated. ResultsThe weight coefficients of the five index components（astragaloside Ⅳ， tenuifolin， calycosin-7-O-β-D-glucoside， polygalaxanthone Ⅲ， and 3，6′-disinapoylsucrose） and dry extract yield were 25.7%， 20.82%， 16.41%， 12.45%， 15.96% and 8.67%， respectively. The optimized extraction process parameters were extracted 3 times with 8， 6， 6 times the amount of water， each time for 1 h. The network prediction results of BP-ANN test samples were consistent with the orthogonal test results， and the mean square error（MSE） of the predicted and measured values of the network was <1%. The water extraction process of Qizhi prescription analyzed and predicted by relevant mathematical models was stable and feasible， which could effectively improve the extraction efficiency of the active ingredients of Astragali Radix and Polygalae Radix， and the average comprehensive score of the validation test was 90.85 with the relative standard deviation（RSD） of 1.55%. ConclusionThis study establishes a water extraction process for compound Qizhi granules， and the optimized extraction process can effectively improve the extraction efficiency of active ingredients， which provides useful references for the optimization of preparation process and the establishment of quality standards for other clinical experience formulas.

Objective To compare the performance and efficacy of prognostic models constructed by different machine learning algorithms in predicting the survival period of lung transplantation (LTx) recipients. Methods Data from 483 recipients who underwent LTx were retrospectively collected. All recipients were divided into a training set and a validation set at a ratio of 7:3. The 24 collected variables were screened based on variable importance (VIMP). Prognostic models were constructed using random survival forest (RSF) and extreme gradient boosting tree (XGBoost). The performance of the models was evaluated using the integrated area under the curve (iAUC) and time-dependent area under the curve (tAUC). Results There were no significant statistical differences in the variables between the training set and the validation set. The top 15 variables ranked by VIMP were used for modeling and the length of stay in the intensive care unit (ICU) was determined as the most important factor. Compared with the XGBoost model, the RSF model demonstrated better performance in predicting the survival period of recipients (iAUC 0.773 vs. 0.723). The RSF model also showed better performance in predicting the 6-month survival period (tAUC _{6 months} 0.884 vs. 0.809, P = 0.009) and 1-year survival period (tAUC _{1 year} 0.896 vs. 0.825, P = 0.013) of recipients. Based on the prediction cut-off values of the two algorithms, LTx recipients were divided into high-risk and low-risk groups. The survival analysis results of both models showed that the survival rate of recipients in the high-risk group was significantly lower than that in the low-risk group (P<0.001). Conclusions Compared with XGBoost, the machine learning prognostic model developed based on the RSF algorithm may preferably predict the survival period of LTx recipients.

The general models for intermediates quality analysis in the production process of Yaobitong capsule were established by near infrared spectroscopy (NIRS) combined with chemometrics, realizing the rapid determination of notoginsenoside R1, ginsenoside Rg1, ginsenoside Re, ginsenoside Rb1, ginsenoside Rd and moisture. The spray-dried fine powder and total mixed granule were selected as research objects. The contents of five saponins were determined by high performance liquid chromatography and the moisture content was determined by drying method. The measured contents were used as reference values. Meanwhile, NIR spectra were collected. After removing abnormal samples by Monte Carlo cross validation (MCCV), Monte Carlo uninformative variables elimination (MC-UVE) and competitive adaptive reweighted sampling (CARS) were used to select feature variables respectively. Based on the feature variables, quantitative models were established by partial least squares regression (PLSR), extreme learning machine (ELM) and ant lion optimization least squares support vector machine (ALO-LSSVM). The results showed that CARS-ALO-LSSVM model had the optimum effect. The correlation coefficients of the six index components were greater than 0.93, and the relative standard errors were controlled within 6%. ALO-LSSVM was more suitable for a large number of samples with rich information, and the prediction effect and stability of the model were significantly improved. The general models with good predicting effect can be used for the rapid quality determination of Yaobitong capsule intermediates.

ObjectiveTo investigate the optimal ratio of goat horn replacing antelope horn in Fufang Lingjiao Jiangya pills and the blood pressure-lowering mechanism of this medicine. MethodsThe blood pressure-lowering efficacy of Fufang Lingjiao Jiangya pills with varying proportions of goat horn replacing antelope horn was evaluated on spontaneous hypertensive rats （SHR）. In this experiment， 50 SHR rats were randomly grouped as follows： model （n=8）， captopril （0.01 g·kg^-1） （n=6）， low-dose blank Fufang Lingjiao Jiangya pills （0.342 g·kg^-1） （n=6）， high-dose blank Fufang Lingjiao Jiangya pills （0.684 g·kg^-1） （n=6）， low-dose antelope horn-containing Fufang Lingjiao Jiangya pills （0.378 g·kg^-1） （n=6）， high-dose antelope horn-containing Fufang Lingjiao Jiangya pills （0.756 g·kg^-1） （n=6）， low-dose goat horn-containing Fufang Lingjiao Jiangya pills （0.378 g·kg^-1） （n=6）， and high-dose goat horn-containing Fufang Lingjiao Jiangya pills （0.756 g·kg^-1） （n=6）. Additionally， 8 WKY rats were used as the normal group. Drugs were administered by gavage for 4 weeks while an equal volume of distilled water was administered for the normal and model groups. Blood pressure was measured before administration， 3 h post administration， and biweekly thereafter. In the experiment for Fufang Lingjiao Jiangya pills with goat horn replacing antelope horn in different proportions， 48 SHR rats were randomly grouped as follows： model， blank Fufang Lingjiao Jiangya pills （0.684 g·kg^-1）， antelope horn-containing Fufang Lingjiao Jiangya pills （0.756 g·kg^-1）， 2× goat horn-containing Fufang Lingjiao Jiangya pills （0.824 g·kg^-1）， 4× goat horn Fufang Lingjiao Jiangya pills （0.969 g·kg^-1）， and 6× goat horn Fufang Lingjiao Jiangya pills （1.112 g·kg^-1）. The normal group included 8 WKY rats， and the normal group and model group received an equal volume of distilled water. The treatment lasted for 2 weeks， and blood pressure was recorded at various time points （pre-administration， 3 h post administration， and on days 4， 7， 10， and 14 of administration）. Serum levels of angiotensin-converting enzyme （ACE）， angiotensin Ⅱ（Ang Ⅱ）， renin， and interleukin-6 （IL-6） were measured by enzyme-linked immunosorbent assay. Histopathological changes in the heart， kidney， and thoracic aorta were observed by hematoxylin-eosin staining. The protein levels of ACE2， angiotensin Ⅱ type 1 receptor （AT1R）， and angiotensinogen （AGT） in the kidney tissue were determined by Western blot， while the expression of nuclear factor （NF）-κB p65 and Toll-like receptor 4 （TLR4） in the thoracic aorta tissue was assessed by immunohistochemistry. ResultsCompared with the model group， all treatment groups showed lowered blood pressure （P<0.05， P<0.01）， and the 6× goat horn-containing Fufang Lingjiao Jiangya pills group showed consistent blood pressure-lowering effect with the antelope horn-containing Fufang Lingjiao Jiangya pills group. Compared with the normal group， the model group showed elevated serum levels of ACE， Ang Ⅱ， renin， and IL-6， while the elevations were declined in the Fufang Lingjiao Jiangya pills groups （P<0.05， P<0.01）. Pathological changes in the heart， kidney， and thoracic aorta were alleviated in all the treatment groups， with the 6× goat horn- and antelope horn-containing Fufang Lingjiao Jiangya pills groups exhibited the best effect. Western blot and immunohistochemistry results showed that all the treatment groups exhibited down-regulated protein levels of AT1R， AGT， NF-κB p65， and TLR4 and up-regulated protein levels of ACE2 （P<0.05， P<0.01） compared with model group， with the 6×goat horn- and antelope horn-containing Fufang Lingjiao Jiangya pills groups showcasing the best effect. ConclusionReplacing antelope horn with 6×goat horn in Fufang Lingjiao Jiangya pills can achieve consistent blood pressure-lowering effect with the original prescription. The prescription may exert the effect by inhibiting the renin-angiotensin-aldosterone system （RAAS） and TLR4/NF-κB signaling pathways.

Objective: To examine the effect of intracellular vesicles (IVs) and extracellular vesicles (EVs) that originated from periodontal ligament stem cells (PDLSCs) on the osteogenic differentiation of PDLSCs within a lipopolysaccharide (LPS)-simulated inflammatory microenvironment, and to provide new insights for the application of IVs in the repair and regeneration of periodontal tissue in periodontitis. Methods: Ethical approval was obtained from the institution. Human-origin PDLSCs were extracted, and the IVs and EVs from PDLSCs at the 3rd-6th passages were gathered and identified using transmission electron microscopy, nano flow cytometry (Nano FCM) analysis, and Western Blot. The 3rd-6th generations of PDLSCs were categorized into the following groups: Control group, LPS group, LPS + 100 μg/mL EVs group (LPS+EVs group), and LPS + 100 μg/mL IVs group (LPS+IVs group). The effects of the IVs and EVs on the anti-inflammatory and osteogenic differentiation of PDLSCs in an inflammatory microenvironment were assessed by using a Cell Counting Kit-8 (CCK-8), enzyme-linked immunosorbent assay (ELISA), quantitative real-time polymerase chain reaction (qRT-PCR), Western Blot, alkaline phosphatase (ALP) staining, and alizarin red staining (ARS). Results: Under transmission electron microscopy, the IVs and EVs derived from PDLSCs displayed a double-layer membrane structure. NanoFCM analysis revealed that the average diameters of the IVs and EVs were 79.6 nm and 82.1 nm, respectively. Western Blot analysis indicated that the surface proteins CD9, CD63, and CD81 of the IVs and EVs were positively expressed, while calnexin was negatively expressed, indicating that IVs and EVs were successfully obtained. Compared with the Control group, the proliferation of PDLSCs in the LPS group was reduced, while the levels of inflammatory cytokine interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α) in the cell supernatant were increased, the mRNA expressions of osteogenic differentiation-related genes, including osteoblast-related genes runt-related transcription factor 2 (RUNX2), alkaline phosphatase (ALP), osteocalcin (OCN) of PDLSCs were reduced, the protein expressions of RUNX2 and osteopontin (OPN) were also decreased (P<0.05); compared with the LPS group, the proliferation of PDLSCs in the LPS+EVs group and LPS+IVs group were significantly increased, while the levels of IL-6, TNF-α were significantly reduced, and the mRNA expressions of RUNX2, ALP, OCN were significantly increased, the protein expressions of RUNX2 and OPN were also significantly increased (P<0.05). Further, in the inflammatory microenvironment, Compared with EVs, IVs more significantly promote the proliferation of PDLSCs, inhibit TNF-α expression, enhance the expression of RUNX2 mRNA, upregulate the expression of RUNX2 and OPN proteins, increase ALP activity, and promote the formation of mineralized nodules (P<0.05). Conclusion IVs and EVs derived from PDLSCs can boost the proliferation of PDLSCs in an inflammatory microenvironment, inhibit the expression of inflammatory factors, and advance the osteogenic differentiation of PDLSCs. The anti-inflammatory and osteogenic effects of IVs are superior to those of EVs.

Background The neck, shoulders, and lower back are the primary affected areas of work-related musculoskeletal disorders. In manual tasks, combinations of hand functional height (defined as working height below the waist), awkward postures, and cognitive load are common risk factors. However, there is limited literature documenting how these factors specifically alter biomechanical load on the neck, shoulders, and lower back when working at hand functional height. Objective To explore quantitative differences in biomechanical load on the neck, shoulders, and lower back of workers performing manual tasks at hand functional height under different postures and cognitive load combinations. Methods A 3x2 within-subject design was implemented, with three postures (squat, kneeling, and stoop) and two levels of cognitive load (with cognitive load induced by a 2back task and without cognitive load). Ten male university students were recruited to perform a predetermined assembly task (a sequence of loosening and tightening screws) at hand functional height. Surface electromyography (sEMG) and 3D motion capture system were employed to assess the participants’ trunk biomechanical load in executing the tasks. Additionally, subjective perception, including fatigue, muscle pain, and cognitive load, were evaluated using scales. Results Significant variations in biomechanical load were observed across the three postures (P<0.05). The stoop posture exhibited the lowest muscle activation in most target muscles, except for the sternocleidomastoid, and showed the fastest decline in instantaneous median frequency (IMF) of the erector spinae, with a rate of (-0.050±0.008) Hz per unit time (0.128 s), and the greatest trunk flexion angle (35.14°±4.40°). Performing the task by squatting resulted in the highest muscle activation, especially in the upper trapezius, where maximum voluntary contraction percentage reached 20.07%±1.26%. In addition, the squatting posture also resulted in larger joint angles in the sagittal plane for the neck (−7.03°±2.70°), shoulders (60.20°±7.89°), and lower back (34.42°±4.20°). The kneeling posture showed intermediate muscle activation, the slowest IMF decline for the erector spinae in the lower back (−0.005±0.008) Hz per unit time (0.128s), and the joint angles were closest to neutral. The task performance results were also superior in the kneeling posture. Regarding cognitive load, no significant differences were found for most biomechanical indicators, except for subjective cognitive load scores, neck flexion, and shoulder external rotation angles. Conclusion In assembly tasks performed at hand functional height, kneeling results in moderate biomechanical load on the neck, shoulders, and lower back while also improves task performance compared to squatting and forward bending. Additionally, no significant effects of cognitive load under the 2back condition on biomechanical load are observed.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.