Oral solid dosage forms require processes such as disintegration and dissolution to release the drug before it can be absorbed and utilized by the body. In this manuscript, imaging technology was used to continuously visualize and characterize the in vitro static drug release process of gliclazide modified release tablets from 15 manufacturers, combined with the traditional method of in vitro dissolution testing, to determine the release profile of gliclazide modified release tablets, to evaluate the similarity of the release profiles by using the similarity factor (f₂) method and based on the analysis of the release profiles fitted with a variety of mathematical models. The results indicate that the gliclazide modified release tablets produced by 14 companies are hydrophilic gel matrix tablets. Compared to the reference listed drug, the release profiles of formulations from 11 companies show high similarity (f₂ > 50) to the reference. Among these, formulations with visual characteristics similar to the reference exhibit similar release curves. This study provides an alternative method for the in vitro consistency evaluation of gliclazide modified release tablets, aiming to assess the in vitro release behaviour of generic formulations more accurately and comprehensively.

ObjectiveThis study leverages structural data from antigen-antibody complexes of the influenza A virus neuraminidase (NA) protein to investigate the spatial recognition relationship between the antigenic epitopes and antibody paratopes. MethodsStructural data on NA protein antigen-antibody complexes were comprehensively collected from the SAbDab database, and processed to obtain the amino acid sequences and spatial distribution information on antigenic epitopes and corresponding antibody paratopes. Statistical analysis was conducted on the antibody sequences, frequency of use of genes, amino acid preferences, and the lengths of complementarity determining regions (CDR). Epitope hotspots for antibody binding were analyzed, and the spatial structural similarity of antibody paratopes was calculated and subjected to clustering, which allowed for a comprehensively exploration of the spatial recognition relationship between antigenic epitopes and antibodies. The specificity of antibodies targeting different antigenic epitope clusters was further validated through bio-layer interferometry (BLI) experiments. ResultsThe collected data revealed that the antigen-antibody complex structure data of influenza A virus NA protein in SAbDab database were mainly from H3N2, H7N9 and H1N1 subtypes. The hotspot regions of antigen epitopes were primarily located around the catalytic active site. The antibodies used for structural analysis were primarily derived from human and murine sources. Among murine antibodies, the most frequently used V-J gene combination was IGHV1-12*01/IGHJ2*01, while for human antibodies, the most common combination was IGHV1-69*01/IGHJ6*01. There were significant differences in the lengths and usage preferences of heavy chain CDR amino acids between antibodies that bind within the catalytic active site and those that bind to regions outside the catalytic active site. The results revealed that structurally similar antibodies could recognize the same epitopes, indicating a specific spatial recognition between antibody and antigen epitopes. Structural overlap in the binding regions was observed for antibodies with similar paratope structures, and the competitive binding of these antibodies to the epitope was confirmed through BLI experiments. ConclusionThe antigen epitopes of NA protein mainly ditributed around the catalytic active site and its surrounding loops. Spatial complementarity and electrostatic interactions play crucial roles in the recognition and binding of antibodies to antigenic epitopes in the catalytic region. There existed a spatial recognition relationship between antigens and antibodies that was independent of the uniqueness of antibody sequences, which means that antibodies with different sequences could potentially form similar local spatial structures and recognize the same epitopes.

ObjectiveBola-like short peptides exhibit novel self-assembly properties due to the formation of peptide dimers via hydrogen bonding interactions between their C-terminals. In this configuration, hydrophilic amino acids are distributed at both terminals, making these peptides behave similarly to Bola peptides. The electrostatic repulsive interactions arising from the hydrophilic amino acids at each terminal can be neutralized, thereby greatly promoting the lateral association of β-sheets. Consequently, assemblies with significantly larger widths are typically the dominant nanostructures for Bola-like peptides. To investigate the effect of hydrophilic amino acids on the self-assembly behavior of Bola-like peptides, the peptides Ac-RI₃-CONH₂ and Ac-HI₃-CONH₂ were designed and synthesized using the Bola-like peptide Ac-KI₃-CONH₂ as a template. Their self-assembly behavior was systematically examined. MethodsAtomic force microscopy (AFM) and transmission electron microscopy (TEM) were employed to characterize the morphology and size of the assemblies. The secondary structures of the assemblies were analyzed using circular dichroism (CD) and Fourier transform infrared (FTIR) spectroscopy. Small-angle neutron scattering (SANS) was used to obtain detailed structural information at a short-length scale. Based on these experimental results, the effects of hydrophilic amino acids on the self-assembly behavior of Bola-like short peptides were systematically analyzed, and the underlying formation mechanism was explored. ResultsThe aggregation process primarily involved three steps. First, peptide dimers were formed through hydrogen bonding interactions between their C-terminals. Within these dimers, the hydrophilic amino acids K, R, and H were positioned at both terminals, enabling the peptides to self-assemble in a manner similar to Bola peptides. Next, β-sheets were formed via hydrogen bonding interactions along the peptide backbone. Finally, self-assemblies were generated through the lateral association of β-sheets. The results demonstrated that both Ac-KI₃-CONH₂ and Ac-RI₃-CONH₂ could self-assemble into double-layer nanotubes with diameters of approximately 200 nm. These nanotubes were formed by the edge fusion of helical ribbons, which initially emerged from twisted ribbons. Notably, the primary assemblies of these peptides exhibited opposite chirality: nanofibers formed by Ac-KI₃-CONH₂ displayed left-handed chirality, whereas those formed by Ac-RI₃-CONH₂ exhibited right-handed chirality. This reversal in torsional direction was primarily attributed to the different abilities of K and R to form hydrogen bonds with water. In contrast, Ac-HI₃-CONH₂ formed narrower twisted ribbons with a significantly reduced width of approximately 30 nm, which was attributed to the strong steric hindrance caused by the imidazole rings. The multilayer height of these ribbons was mainly due to the unique structure of the imidazole rings, which can function as both hydrogen bond donors and acceptors, thereby promoting aggregate growth in the vertical direction. ConclusionThe final morphology of the self-assemblies resulted from a delicate balance of various non-covalent interactions. By altering the types of hydrophilic amino acid residues in Bola-like short peptides, the relative strength of non-covalent interactions that drive assembly formation can be effectively regulated, allowing precise control over the morphology and chirality of the assemblies. This study provides a simple and effective approach for constructing diverse self-assemblies and lays a theoretical foundation for the development of functional biomaterials.

Background: Despite the fact that an increasing number of studies have focused on developing therapies for acute lung injury, managing acute respiratory distress syndrome (ARDS) remains a challenge in intensive care medicine.Whether the pathology of animal models with acute lung injury in prior studies differed from clinical symptoms of ARDS, resulting in questionable management for human ARDS. To evaluate precisely the therapeutic effect of trans‑ planted stem cells or medications on acute lung injury, we developed an animal model of severe ARDS with lower lung function, capable of keeping the experimental animals survive with consistent reproducibility. Establishing this animal model could help develop the treatment of ARDS with higher efficiency. Results: In this approach, we intratracheally delivered bleomycin (BLM, 5 mg/rat) into rats’ left trachea via a needle connected with polyethylene tube, and simultaneously rotated the rats to the left side by 60 degrees. Within sevendays after the injury, we found that arterial blood oxygen saturation ­(SpO2 ) significantly decreased to 83.7%, partial pressure of arterial oxygen ­(PaO2 ) markedly reduced to 65.3 mmHg, partial pressure of arterial carbon dioxide ­(PaCO2 )amplified to 49.2 mmHg, and the respiratory rate increased over time. Morphologically, the surface of the left lung appeared uneven on Day 1, the alveoli of the left lung disappeared on Day 2, and the left lung shrank on Day 7. A his‑ tological examination revealed that considerable cell infiltration began on Day 1 and lasted until Day 7, with a larger area of cell infiltration. Serum levels of IL-5, IL-6, IFN-γ, MCP-1, MIP-2, G-CSF, and TNF-α substantially rose on Day 7. Conclusions This modified approach for BLM-induced lung injury provided a severe, stable, and one-sided (left-lobe) ARDS animal model with consistent reproducibility. The physiological symptoms observed in this severe ARDS animal model are entirely consistent with the characteristics of clinical ARDS. The establishment of this ARDS animal model could help develop treatment for ARDS.

Background: Despite the fact that an increasing number of studies have focused on developing therapies for acute lung injury, managing acute respiratory distress syndrome (ARDS) remains a challenge in intensive care medicine.Whether the pathology of animal models with acute lung injury in prior studies differed from clinical symptoms of ARDS, resulting in questionable management for human ARDS. To evaluate precisely the therapeutic effect of trans‑ planted stem cells or medications on acute lung injury, we developed an animal model of severe ARDS with lower lung function, capable of keeping the experimental animals survive with consistent reproducibility. Establishing this animal model could help develop the treatment of ARDS with higher efficiency. Results: In this approach, we intratracheally delivered bleomycin (BLM, 5 mg/rat) into rats’ left trachea via a needle connected with polyethylene tube, and simultaneously rotated the rats to the left side by 60 degrees. Within sevendays after the injury, we found that arterial blood oxygen saturation ­(SpO2 ) significantly decreased to 83.7%, partial pressure of arterial oxygen ­(PaO2 ) markedly reduced to 65.3 mmHg, partial pressure of arterial carbon dioxide ­(PaCO2 )amplified to 49.2 mmHg, and the respiratory rate increased over time. Morphologically, the surface of the left lung appeared uneven on Day 1, the alveoli of the left lung disappeared on Day 2, and the left lung shrank on Day 7. A his‑ tological examination revealed that considerable cell infiltration began on Day 1 and lasted until Day 7, with a larger area of cell infiltration. Serum levels of IL-5, IL-6, IFN-γ, MCP-1, MIP-2, G-CSF, and TNF-α substantially rose on Day 7. Conclusions This modified approach for BLM-induced lung injury provided a severe, stable, and one-sided (left-lobe) ARDS animal model with consistent reproducibility. The physiological symptoms observed in this severe ARDS animal model are entirely consistent with the characteristics of clinical ARDS. The establishment of this ARDS animal model could help develop treatment for ARDS.

Background: Despite the fact that an increasing number of studies have focused on developing therapies for acute lung injury, managing acute respiratory distress syndrome (ARDS) remains a challenge in intensive care medicine.Whether the pathology of animal models with acute lung injury in prior studies differed from clinical symptoms of ARDS, resulting in questionable management for human ARDS. To evaluate precisely the therapeutic effect of trans‑ planted stem cells or medications on acute lung injury, we developed an animal model of severe ARDS with lower lung function, capable of keeping the experimental animals survive with consistent reproducibility. Establishing this animal model could help develop the treatment of ARDS with higher efficiency. Results: In this approach, we intratracheally delivered bleomycin (BLM, 5 mg/rat) into rats’ left trachea via a needle connected with polyethylene tube, and simultaneously rotated the rats to the left side by 60 degrees. Within sevendays after the injury, we found that arterial blood oxygen saturation ­(SpO2 ) significantly decreased to 83.7%, partial pressure of arterial oxygen ­(PaO2 ) markedly reduced to 65.3 mmHg, partial pressure of arterial carbon dioxide ­(PaCO2 )amplified to 49.2 mmHg, and the respiratory rate increased over time. Morphologically, the surface of the left lung appeared uneven on Day 1, the alveoli of the left lung disappeared on Day 2, and the left lung shrank on Day 7. A his‑ tological examination revealed that considerable cell infiltration began on Day 1 and lasted until Day 7, with a larger area of cell infiltration. Serum levels of IL-5, IL-6, IFN-γ, MCP-1, MIP-2, G-CSF, and TNF-α substantially rose on Day 7. Conclusions This modified approach for BLM-induced lung injury provided a severe, stable, and one-sided (left-lobe) ARDS animal model with consistent reproducibility. The physiological symptoms observed in this severe ARDS animal model are entirely consistent with the characteristics of clinical ARDS. The establishment of this ARDS animal model could help develop treatment for ARDS.

ObjectiveTo explore the possible mechanism of action of Lifei Xiaoji Pill （理肺消积丸， LXP） in the treatment of non small cell lung cancer based on the Warburg effect and the USP47/BACH1 pathway. MethodsFifty C57BL/6 mice were randomly divided into five groups， model group， LXP group， inhibitor group， LXP + inhibitor group， and cisplatin group， with 10 mice in each group. A lung cancer mouse model was established by subcutaneously injecting Lewis cells. On the next day， the model group mice were given 0.2 ml of saline by gavage daily， the LXP group given 240 mg/（kg·d） of LXP solution once a day by gavage， the inhibitor group intraperitoneally injected with P22077 at a dose of 10 mg/（kg·d） every day， the LXP + inhibitor group given both LXP by gavage and P22077 by intraperitoneal injection once a day， and the cisplatin group received 0.5 mg/（kg·d） cisplatin intraperitoneally every other day. All treatments lasted for 14 days. On the day after the last dose， tumor weight and volume were measured， tumor histopathology was examined by HE staining， apoptosis in tumor tissues was detected by TUNEL staining， and proliferation cell nuclear antigen （PCNA） protein levels were detected by immunohistochemistry. Warburg effect indicators， including glucose concentration， lactate content， and adenosine triphosphate （ATP） production in tumor tissues， were measured. Western Blot and qRT-PCR were used to detect the protein and mRNA expression levels of USP47， BACH1， hexokinase 2 （HK2）， and glyceraldehyde 3-phosphate dehydrogenase （GAPDH）. ResultsCompared with the model group， all drug intervention groups showed reduced tumor weight and volume， improved tumor pathology， decreased PCNA positive rate， increased apoptosis rate， and reduced expression levels of USP47， BACH1， and HK2 proteins and mRNA （P＜0.05 or P＜0.01）. Except for lactate content in the cisplatin group， the glucose concentration in tumor tissues of other drug intervention groups increased， while lactate content and ATP production decreased （P＜0.05 or P＜0.01）. Compared with the LXP group， the LXP + inhibitor group showed more significant improvements in these indicators （P＜0.05 or P＜0.01）. Compared with the cisplatin group， the LXP + inhibitor group had lower mRNA expression of HK2 and GAPDH， and lower protein levels of USP47 and HK2 （P＜0.05 or P＜0.01）. Compared with the inhibitor group， the cisplatin group had higher HK2 protein levels， while the LXP + inhibitor group showed lower mRNA expression of BACH1， HK2， and GAPDH （P＜0.05 or P＜0.01）. ConclusionLXP significantly inhibits tumor growth in lung cancer mice， and its mechanism of action may be related to inhibiting the Warburg effect via the USP47/BACH1 pathway.