ObjectiveTo establish an ultra-performance liquid fingerprint and multi-components determination method for Naomaili granules. To evaluate the quality of different batches by chemometrics， and the anti-neuroinflammatory effects of water extract and main components of Naomaili granules were tested in vitro. MethodsThe similarity and common peaks of 27 batches of Naomaili granules were evaluated by using Ultra performance liquid chromatography （UPLC） fingerprint detection. Ultra-performance liquid chromatography-tandem mass spectrometry （UPLC-MS/MS） technology was used to determine the content of the index components in Naomaili granules and to evaluate the quality of different batches of Naomaili granules by chemometrics. LPS-induced BV-2 cell inflammation model was used to investigate the anti-neuroinflammatory effects of the water extract and main components of Naomaili granules. ResultsThe similarity of fingerprints of 27 batches of samples was > 0.90. A total of 32 common peaks were calibrated， and 23 of them were identified and assigned. In 27 batches of Naomaili granules， the mass fractions of 14 components that were stachydrine hydrochloride， leonurine hydrochloride， calycosin-7-O-glucoside， calycosin，tanshinoneⅠ， cryptotanshinone， tanshinoneⅡ_A， ginsenoside Rb₁， notoginsenoside R₁， ginsenoside Rg₁， paeoniflorin， albiflorin， lactiflorin， and salvianolic acid B were found to be 2.902-3.498， 0.233-0.343， 0.111-0.301， 0.07-0.152， 0.136-0.228， 0.195-0.390， 0.324-0.482， 1.056-1.435， 0.271-0.397， 1.318-1.649， 3.038-4.059， 2.263-3.455， 0.152-0.232， 2.931-3.991 mg∙g^-1， respectively. Multivariate statistical analysis showed that paeoniflorin， ginsenoside Rg₁， ginsenoside Rb₁ and staphylline hydrochloride were quality difference markers to control the stability of the preparation. The results of bioactive experiment showed that the water extract of Naomaili granules and the eight main components with high content in the prescription had a dose-dependent inhibitory effect on the release of NO in the cell supernatant. Among them， salvianolic acid B and ginsenoside Rb₁ had strong anti-inflammatory activity， with IC₅₀ values of （36.11±0.15） mg∙L^-1 and （27.24±0.54） mg∙L^-1， respectively. ConclusionThe quality evaluation method of Naomaili granules established in this study was accurate and reproducible. Four quality difference markers were screened out， and eight key pharmacodynamic substances of Naomaili granules against neuroinflammation were screened out by in vitro cell experiments.

ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Owing to its inherent advantages—such as being non-destructive, rapid, highly molecule-specific, and minimally interfered with by moisture—Raman spectroscopy has been widely adopted in the fields of skin barrier function assessment, monitoring the transdermal penetration of active cosmetic ingredients, and the identification and quality control of cosmetic products. Despite these strengths, the practical application of this technique faces a significant bottleneck: the strong fluorescence background generated by endogenous skin components and exogenous cosmetic additives. Endogenous skin substances, such as structural proteins (e.g., collagen and elastin), metabolic coenzymes (e.g., nicotinamide adenine dinucleotide), and pigments (e.g., melanin), together with exogenous cosmetic constituents like organic colorants, chemical sunscreens, and fragrances, often possess strong absorption and emission characteristics. When excited by lasers, these components produce a fluorescence background that can be 10⁶ to 10⁸ times stronger than the Raman scattering signals, effectively masking the inherently weak vibrational fingerprint information. In recent years, driven by the rapid development of optoelectronic hardware and artificial intelligence algorithms, fluorescence suppression strategies have evolved from isolated, single-method approaches into comprehensive, multi-level synergistic systems. These systems are categorized into three distinct tiers: sample preparation, signal acquisition, and data processing. At the sample preparation level, techniques such as photobleaching and surface-enhanced Raman spectroscopy (SERS) are employed to eliminate or bypass the generation of fluorescence at the source. At the signal acquisition level, instrumental improvements—including the use of long-wavelength near-infrared excitation (typically 785 nm or 1 064 nm), confocal spatial filtering, and shifted excitation Raman difference spectroscopy (SERDS)— are utilized to physically isolate Raman signals from the fluorescence background. Furthermore, at the data processing level, numerical baseline correction methods such as polynomial fitting, penalized least squares (e.g., airPLS, arPLS), wavelet transform, and derivative algorithms are increasingly integrated into the analytical pipeline to extract Raman spectral features from mixed signals without increasing hardware costs or acquisition time. This review provides a systematic categorization and critical evaluation of these fluorescence suppression methods, detailing their underlying principles, technical advantages, and inherent limitations in diverse experimental setups. By focusing on critical application scenarios—including skin barrier assessment, percutaneous absorption monitoring, the routine quality control of cosmetics, and the emerging field of portable on-site detection—this paper explores the current state of technique selection and optimization. Finally, the article discusses future development trends, emphasizing the necessity of constructing adaptive, tiered suppression strategies, developing intelligent and automated data processing algorithms, and promoting the integration of portable, multi-modal diagnostic devices. The objective of this review is to provide a comprehensive technical reference to facilitate the transition of Raman spectroscopy from a specialized laboratory tool into a routine, robust analytical platform for advancements in skin science and cosmetic research.

Objective To understand the current situation of healthcare-associated infection(HAI)in China,pro-vide data support and decision-making basis for formulating scientific and effective strategies for HAI prevention and control.Methods A nationwide cross-sectional survey on HAI was conducted among various types and levels of medical institutions in China according to a unified protocol of bedside surveys and case investigations.Results In 2024,a total of 5 736 medical institutions and 2 751 765 patients were surveyed.Among them,34 889 HAI cases were identified,with a prevalence rate of 1.27％.The number of HAI episodes was 38 032,and case prevalence rate was 1.38％.The prevalence rate of HAI in medical institutions in different regions of China ranged from 0.66％to 2.35％.Among medical institutions of different scales,those with a bed capacity of ≥900 had the high-est incidence of HAI,reaching 1.65％.The most common infection site was the lower respiratory tract(44.66％),followed by the urinary tract(12.94％),surgical site(9.32％),upper respiratory tract(7.02％),and bloodstream infection(5.78％).The top 3 departments with the highest HAI rates were the general intensive care unit(10.02％),department of neurosurgery(5.51％),and department(group)of hematology(5.34％).A total of 23 238 strains of HAI pathogens were detected,with 10 714 strains(46.10％)from lower respiratory tract speci-mens.The top 5 detected strains were Klebsiella pneumoniae(14.76％),Pseudomonas aeruginosa(13.33％),Escherichia coli(12.79％),Acinetobacter baumannii(9.23％),and Staphylococcus aureus(7.88％).231 944 pa-tients underwent class Ⅰ incision surgery were monitored,with 1 647 cases experienced surgical site infection,and the prevalence rate of surgical site infection was 0.71％.The number of patients who should undergo pathogen de-tection(patients receiving therapeutic and therapeutic combined prophylactic antimicrobial agents)was 715 179,while the actual number was 480 492,with a pathogen detection rate of 67.18％.425 225 patients received patho-genic detection before treatment,with a detection rate of 59.46％.Conclusion The overall HAI prevalence in Chi-na is lower,showing disparities among medical institutions of different regions and scales.Therefore,precise imple-mentation of measures is necessary for HAI prevention and control,with a focus on high-risk institutions and high-risk departments,key areas,and critical procedures.All levels of medical institutions should continuously reduce the incidence of HAI by strengthening monitoring,standardizing the use of antimicrobial agents,and reinforcing basic HAI prevention and control measures.

Objective:To investigate the bone marrow and peripheral blood cytological characteristics and prognosis in acute myeloid leukemia(AML)with FLT3-ITD mutation.Methods:A total of 106 newly diagnosed AML patients who were hospitalized in the First Affiliated Hospital of Xi'an JiaoTong University from January 2021 to December 2023 were collected,and divided into mutation group and non-mutation group according to the results of high-throughput sequencing of bone marrow specimens.The cytological characteristics of bone marrow smears and peripheral blood smears of patients in the two groups were analyzed at the time of initial diagnosis.The differences in the degree of hyperplasia,the proportion of leukemic cells,and the erythroblasts and megakaryocytes were compared between the two groups.What's more,the relationship between FLT3-ITD mutation status and characteristics of bone marrow and peripheral blood cells was analyzed.Results:AML patients with FLT3-ITD mutation accounted for 24.53％of the hospitalized AML patients during the same period.Patients with peripheral blood leukocyte counts＞30 × 109/L accounted for 53％,and＞100 × 109/L accounted for 15％in FLT3-ITD mutation group.Compared with non-mutation group,the peripheral blood leukocyte count was significantly higher in the mutation group(P＜0.001),and the degree of hemoglobin decline was milder(P＜0.05).The level of platelet was not significantly different between the two groups(P＞0.05).The highest proportion of FAB subtypes were M2a and M5a in mutation group,which accounted for 38％and 27％,respectively.The proportion of extreme hyperplasia of bone marrow in the mutation group was 38.46％,which was higher than 23.75％in the non-mutation group.The proportion of peripheral blood and bone marrow leukemic cells in patients with high-frequency mutation were significantly higher than those in patients with low-frequency mutation(both P＜0.01).The complete remission(CR)rate after the first induction chemotherapy was 38.46％and 65.00％in the mutation group and non-mutation group,respectively,and the CR rate after 2 courses of induction chemotherapy was 50.00％and 73.75％,respectively.Conclusion:The FLT3-ITD mutation results in high proliferation and rapid progression of the bone marrow feature in AML patients,with less suppression of normal erythropoiesis.Increased mutation frequency is accompanied by increased leukemic tumor burden in the bone marrow and circulation,and patients with FLT3-ITD mutation have a low response rate to early induction therapy.

Berberine is a kind of isoquinoline alkaloid extracted from the roots and rhizomes of many medicinal plants,such as Coptis chinensis of Ranunculus family,Phellodendron chinensis of rutaceae family,and Berberine Sanacanthus family.In recent years,with the deepening of research,berberine has shown re-markable prevention and treatment effect in a variety of neuro-psychiatric disease models.This paper summarizes the research progress of berberine in neuropsychiatric diseases and provides theoretical support for further clinical prevention and treatment of neuropsychiatric diseases.

Subunit 5B of constitutively photomorphogenic 9 signalosome(CSN5B)is an inhibitory factor for the biosynthesis of vitamin C in the L-galactose synthesis pathway in plants.To create mutants with richer vitamin C in tomato fruits,a dual-target vector of pKSE402-SlCSN5Bwas constructed and trans-formed into the breeding parent of 1912.Based on the molecular biological assay and DNA sequencing,17 transgenic positive lines were determined,and 6 lines of them were genetically mutated at the target site of SlCSN5B,with an editing efficiency of 35.3％.Among the mutants,2 lines were homozygous mu-tants,csn5b-6 with 180 bp deletion and csn5b-8 with 3 bp deletion.The biological traits of two types of deficiency homozygotes without exogenous T-DNA insertion derived from the T1 generation were observed,and there were no significant differences in phenotypes of the plant and fruit.Through physiological tes-ting of red-ripe fruits from T,generation lines of csn5b-6,the GMPase activity and the vitamin C content significantly increased by 43％and 37.8％,respectively,the content of hydrogen peroxide significantly decreased by 25.9％,and the content of soluble solids did not obviously change,compared with the wild type.There were no significant differences in plant traits and physiological characteristics between T1 gen-eration lines of csn5b-8 and the wild type.Based on gene expression analysis and protein structure predic-tion,the results showed that the gene of SlCSN5B normally transcribed,and the loss of large peptide seg-ments of CSN5B encoded by SlCSN5B caused changes in its structure to affect functioning,which led to an increase of vitamin C content in the line of csn5b-6-1 1.The findings suggest that the vitamin C content of tomato fruit can be improved by CRISPR/Cas9-mediated SlCSN5B gene editing,which provides the valuable resources for high-quality breeding in tomato.

Objective To compare the effects of different detector combinations of 320-row CT on the image quality and radiation dose of head CT to explore the feasibility of using a wide detector for head CT scanning.Methods Totally 100 patients underwent head CT scanning due to trauma or cerebrovascular disease at some hospital from June to August 2023 were collected prospectively and divided into group A and group B by using block randomization grouping method,with the length of the block group being 2 and 50 patients in each group.In group A,all the detectors had the widths at z-axis direction being 40×0.5 mm and head scanning was completed after multiple exposures;in group B,detector combinations with widths of 280×0.5 mm or 320×0.5 mm were chosen based on the patient's head size in the head-foot direction(z-axis direction),and head scanning was performed with a single-turn exposure.The remaining scanning and image reconstruction parameters in the two groups were kept completely consistent.The head image quality of the 2 groups was evaluated objectively and scored subjectively by 2 radiologists.The volume CT dose index(CTDIvol),dose length product(DLP)and exposure time of the 2 groups were recorded,and the effective dose(ED)was calculated.SPSS 22.0 software was used for statistical analysis.Results In terms of objective evaluation of image quality,at the level of the parietal skull group B had the CT value of gray matter,image noise and contrast to noise ratio(CNR)of the images higher than those of group A,and the differences were statistically significant(all P<0.05);at the level of the posterior skull group B had the CT values of gray and white matter,image noise and air noise lower while CNR higher than those of group A,and the differences were statistically significant(all P<0.05).In terms of subjective scoring of image quality,at the levels of parietal and posterior skull group A behaved better than group B,and the differences were statistically significant(all P<0.05).In group A 5 patients had obvious motion artifacts affecting the diagnosis and the image quality scores not higher than 2,and secondary scanning had to be carried out;In group B all the patients had no obvious motion artifacts and met the diagnosis requirements.When compared with group A Group B had the CTDIvol,DLP,ED and exposure time decreased by 17.44%,17.24%,17.48%and 85.53%,respectively,and the differences were statistically significant(all P<0.05).Conclusion A wide detector gains advantages over a 20 mm detector in image quality when 320-row CT is used for head CT scanning,with the diagnosis requirements satisfied.[Chinese Medical Equipment Journal,2025,46(4):57-62]

Objective To design a high altitude adaptive oxygen generator for the crews to alleviate their high altitude reaction in high altitude environment and meet their requirements for oxygen supply.Methods A high altitude adaptive oxygen generator based on the mature pressure swing adsorption oxygen production method was designed with the key technologies of discharge capacity compensation of air compression pump and airway fusion of molecular sieve tower,which had the components of molecular sieve tower,air compression pump,controller,cooling fan,cooler,solenoid valve,regulator,flow meter and etc.Trials were carried out at the simulated altitude and field plateau environment so as to verify the high altitude adaptive performance of the oxygen generator developed.Results The trial results showed the oxygen generator met the desired objectives and the requirements for oxygen volume fraction in GJB 2799-1996 General specification for medical oxygen generator using molecular sieve method.Conclusion The oxygen generartor provides oxygen supply effectively for vehicle operators in plateau environments or the ones rushing into the plateau.[Chinese Medical Equipment Journal,2025,46(4):29-34]

Objective To explore the correlation between fasting blood glucose(FBG)level and fractional flow reserve(FFR)in patients with borderline coronary artery disease,and to clarify its potential influence on FFR measurement.Methods From August 2020 to August 2023,the data of 135 patients with coronary atherosclerotic heart disease who received coronary angiography and FFR evaluation in the Fourth Affiliated Hospital of Harbin Medical University were retrospectively collected.According to the exclusion and inclusion criteria,85 cases of borderline diseased vessels of single coronary artery with stenosis degree of 50％-80％were screened out,and they were divided into FBG≥6.1 mmol/L group(47 cases)and FBG＜6.1 mmol/L group(38 cases).The baseline data,angiographic and functional indexes of the two groups were compared,and the correlation between FBG and FFR was analyzed.Results Compared with the FBG＜6.1 mmol/L group,the FBG≥6.1 mmol/L group had a higher proportion of FFR negative results(72.3％vs.23.7％,P＜0.001),and the FFR measurement values were generally increased[0.84(0.80,0.90)vs.0.75(0.68,0.80),P＜0.001],with statistically significant differences.Pearson correlation analysis was performed on all lesions,and FFR＞0.80(negative result)was positively correlated with FBG≥6.1 mmol/L(r=0.484,P＜0.001).Conclusions Among the patients with borderline coronary artery disease(50％-80％stenosis)included in this study,FBG≥6.1 mmol/L is significantly correlated with FFR＞0.80.For patients with borderline coronary lesions with elevated FBG,the influence of blood glucose factors should be carefully considered in clinical interpretation of FFR results.