ObjectiveTo evaluate the impact of stroke on diaphragmatic function by ultrasound. MethodsFrom April, 2024 to June, 2025, 40 stroke patients (stroke group) were recruited in Xuanwu Hospital Capital Medical University. Additionally, 40 sex- and age-matched healthy subjects (control group) were recruited without directional selection. Diaphragmatic excursion and diaphragmatic thickness during quiet breathing and deep breathing were assessed using ultrasound in both groups, and the diaphragmatic thickening fraction was calculated. The stroke group was further divided into two subgroups according to disease course: ≤ 30 days group and > 30 days group, for subgroup analysis. ResultsDuring both quiet and deep breathing, diaphragmatic excursion on the affected side in the stroke group was smaller than that on the unaffected side and in the control group (P < 0.05). During quiet breathing, diaphragmatic thickening fraction on the affected side in the stroke group was smaller than that on the unaffected side and in the control group (P < 0.05), while the diaphragmatic thickening fraction on the unaffected side was significantly smaller than that in the control group (P < 0.01). During deep breathing, the bilateral diaphragmatic thickening fraction in the stroke group was significantly smaller than that in the control group (P < 0.001), and the bilateral end-inspiratory diaphragmatic thickness was significantly smaller than that in the control group (P < 0.001). During quiet breathing, diaphragmatic excursion in both the ≤ 30 d group and the > 30 d group was smaller than that in the control group (P < 0.05); during deep breathing, diaphragmatic excursion in the ≤ 30 d group was smaller than that in the control group (P < 0.05). In both quiet breathing and deep breathing, the diaphragmatic thickening fraction in the ≤ 30 d group and the >30 d group were lower than those in the control group (P < 0.05). During deep breathing, end-inspiratory diaphragmatic thickness in both the ≤ 30 d group and the > 30 d group was significantly smaller than that in the control group (P < 0.01). ConclusionUltrasound can effectively identify the impact of stroke on patients' diaphragmatic function. In stroke patients, both diaphragmatic excursion and contractile performance are reduced on the affected side, while contractile performance is also reduced on the unaffected side.

Tertiary lymphoid structures (TLSs), as a crucial component of the tumor micro-environment, have attracted significant attention in the field of tumor research in recent years. TLSs are composed of multiple immune cells and formed under the stimulation of chronic inflammation, with their maturation process divided into different stages. They exert anti-tumor effects by mimic-king the functions of secondary lymphoid organs and generating adaptive immune responses. In terms of the prognosis of gastric cancer, the cell composition, spatial distribution of TLSs, and their combination with other indicators are all helpful in predicting the prognosis of patients. Meanwhile, the TLSs scoring system is expected to become an index for evaluating the efficacy of immuno-therapy. Treatment strategies for inducing TLSs formation have achieved certain results in animal models, but potential treatment risks require attention. The authors elaborate on formation and maturation process of TLSs, anti-tumor mechanism, value in prognostic assessment of gastric cancer and multiple tumors, prediction of immunotherapy, as well as treatment strategies for inducing the formation of TLSs.

AIM To study the chemical constituents from Dictamni Cortex.METHODS The 70％ethanol extract from Dictamni Cortex was isolated and purified by HP-20 macroporous resin,silica gel,MCI,ODS and preparative HPLC,then the structures of obtained compounds were identified by physicochemical properties and spectral data.RESULTS Thirty-three compounds were isolated and identified as rutin(1),apigenin(2),catechin(3),hesperetin(4),leonuriside A(5),androsin(6),2-methoxy-4-acetylphenol-O-α-rhamnopyranosyl-(1"-6')-β-glucopyranoside(7),vanillic acid(8),gallic acid(9),4-hydroxybenzoic acid(10),benzoic acid(11),involcranoside B(12),benzyl β-D-glucopyranoside(13),bphenylethyl-rutinoside(14),1-bromonaphthalene(15),cimifugin(16),9(S),12(S),13(S)-trihydroxyoctadeca-10(E),15(Z)-dienoic acid(17),methyl-9,12,13-trihydroxyoctadeca-10,15-dienoate(18),7,8-dihydroxy-9,12(Z,Z)-octadecadienoic acid(19),vernolic acid(20),9,10(erythro)-dihydroxy-11 E-octadecadienoic acid methyl ester(21),(7Z,9E,13Z)-11-hydroxyhexadeca-7,9,13-trienoic acid(22),(7Z,10Z,14E,16Z,19Z)-13-hydroxydocosa-7,10,14,16,19-pentaenoic acid(23),(9E)-8,11,12-trihydroxyoctadecenoic acid methyl ester(24),n-hexanol-O-rutinoside(25),hexyl β-sophoroside(26),3-pentyl 6'-(3-hydroxy-3-methylglutaryl)-β-D-glucopyranoside(27),3-methylbut-3-enyl-6-O-β-D-glucopyranosyl-β-D-glucopyranoside(28),3-methyl-but-2-en-1-yl β-D-glucopyranoside(29),3-methylbutan-1-ol-β-D-glucopyranoside(30),pregnenolone(31),2-butoxytetrahydrofuran(32),psydrin(33).CONCLUSION Compounds 2-4,8-13,15-16,25-28 and 32-33 are isolated from Rutaceae family for the first time.

Objective To investigate the coagulation effect of a cold atmospheric plasma(CAP)jet device with helium as the working gas and to study its coagulation mechanism preliminarily.Methods A CAP jet device treatment group,a helium airflow treatment group,a hot air treatment group(60℃)and a natural coagulation group were formed according to the treatment modes of the blood samples,with 10 μL of blood samples involved in each group,in order to validate the coagulation effect of the CAP jet device in vitro;the coagulation mechanism of the CAP jet device was explored by its application to the treatment of anticoagulated whole blood,platelet-rich plasma and platelet-depleted plasma;the coagulation effect of the CAP jet device in vivo was verified with a mouse liver punctate hemorrhage model and a rabbit mesenteric hemorrhage model.Results The CAP jet device can significantly accelerate the coagulation of anticoagulated blood droplets,and the coagulation time of anticoagulated blood droplets in the CAP jet device-treated group was shortened from 28 min in the natural coagulation group to(23±1.56)s,with the difference statistically significant(P<0.05),and the CAP jet device treatment group gained advantages significantly over the helium airflow treatment group(P<0.05)and the hot air(60℃)treatment group(P<0.05)in coagulation-promoting effect;the procoagulant effect of the CAP jet device rose with the increase of platelet content in blood droplets,and the coagulation effect of platelet-rich blood droplets was significantly better than that of whole blood(P<0.05),while no coagulation was observed in platelet-poor droplets.The CAP jet device could rapidly stop hemostasis of punctate hemorrhage in mouse liver and mesenteric hemorrhage in rabbits without delayed hemorrhage occurring within 10 min,and no obvious structural abnormality of the liver and thermal damage of the tissue were found microscopically.Conclusion The CAP jet device plays procoagulant and hemostatic effects in vivo and in vitro,and its effect is not dependent on temperature and airflow evaporation effects and is considered to be related to platelet activation,with low thermal damage to living tissue.[Chinese Medical Equipment Journal,2025,46(6):20-27]

Objective To investigate the coagulation effect of a cold atmospheric plasma(CAP)jet device with helium as the working gas and to study its coagulation mechanism preliminarily.Methods A CAP jet device treatment group,a helium airflow treatment group,a hot air treatment group(60℃)and a natural coagulation group were formed according to the treatment modes of the blood samples,with 10 μL of blood samples involved in each group,in order to validate the coagulation effect of the CAP jet device in vitro;the coagulation mechanism of the CAP jet device was explored by its application to the treatment of anticoagulated whole blood,platelet-rich plasma and platelet-depleted plasma;the coagulation effect of the CAP jet device in vivo was verified with a mouse liver punctate hemorrhage model and a rabbit mesenteric hemorrhage model.Results The CAP jet device can significantly accelerate the coagulation of anticoagulated blood droplets,and the coagulation time of anticoagulated blood droplets in the CAP jet device-treated group was shortened from 28 min in the natural coagulation group to(23±1.56)s,with the difference statistically significant(P<0.05),and the CAP jet device treatment group gained advantages significantly over the helium airflow treatment group(P<0.05)and the hot air(60℃)treatment group(P<0.05)in coagulation-promoting effect;the procoagulant effect of the CAP jet device rose with the increase of platelet content in blood droplets,and the coagulation effect of platelet-rich blood droplets was significantly better than that of whole blood(P<0.05),while no coagulation was observed in platelet-poor droplets.The CAP jet device could rapidly stop hemostasis of punctate hemorrhage in mouse liver and mesenteric hemorrhage in rabbits without delayed hemorrhage occurring within 10 min,and no obvious structural abnormality of the liver and thermal damage of the tissue were found microscopically.Conclusion The CAP jet device plays procoagulant and hemostatic effects in vivo and in vitro,and its effect is not dependent on temperature and airflow evaporation effects and is considered to be related to platelet activation,with low thermal damage to living tissue.[Chinese Medical Equipment Journal,2025,46(6):20-27]

BACKGROUND:The development of calcium phosphate bone cement is limited due to its poor mechanical properties and weak osteogenic ability.Silicate bioactive glass is highly favored due to its excellent biological activity and osteogenic ability.Simultaneously,fiber structures can enhance the mechanical strength of materials.OBJECTIVE:To investigate the mechanical properties,biocompatibility,and osteogenic effect of silicate bioactive glass fiber composite calcium phosphate bone cement.METHODS:Different mass percentages(0％,10％,and 20％)of silicate bioactive glass fiber were added to the solid phase of calcium phosphate bone cement,mixed with the liquid phase and cured for 48 hours to obtain silicate bioactive glass fiber composite calcium phosphate bone cement.The mechanical properties,setting time,and ion precipitation of the cement were characterized.The three groups of bone cement extracts were co-cultured with MC3T3-E1 cells.The cell compatibility of the materials was evaluated by CCK-8 assay,live/dead staining,and phalloidin staining.After osteogenic induction,the osteogenic induction ability of the materials was evaluated by alkaline phosphatase staining,alizarin red staining,RUNX2 immunofluorescence staining,and RT-PCR.RESULTS AND CONCLUSION:(1)With the increase of silicate bioactive glass fiber content,the compressive strength and flexural strength of bone cement increased,and the setting time was prolonged.When bone cement was immersed in simulated body fluid,the precipitation of silicon ions,calcium ions,and phosphorus ions could be detected.Moreover,with the increase of silicate bioactive glass fiber content,the mass concentration of silicon ions and phosphorus ions released by bone cement increased,and the mass concentration of calcium ions decreased.(2)Live/dead staining and phalloidin staining results exhibited that silicate bioactive glass fiber composite calcium phosphate bone cement had no toxic effect on MC3T3-E1 cells.CCK-8 assay results showed that silicate bioactive glass fiber composite calcium phosphate bone cement could promote the proliferation of MC3T3-E1 cells.(3)With the increase of silicate bioactive glass fiber content in bone cement,the alkaline phosphatase activity and extracellular calcium deposition of MC3T3-E1 cells increased,the expression of RUNX2 protein increased,and the expression of alkaline phosphatase,osteocalcin,osteopontin,and RUNX2 mRNA expression increased.(4)The results indicate that silicate bioactive glass fibers can enhance the mechanical properties and osteogenic induction ability of calcium phosphate bone cement,among which 20％silicate bioactive glass fibers have a more obvious effect.

Objective To design an intelligent airborne soldier physical training system based on human body composition analysis to solve the problems in diversity of training mode,targeted training plan and high incidence of military training-related injuries.Methods The intelligent airborne military physical training system was designed with B/S architecture and developed with Python language,which was composed of four functional modules for airborne soldier information acquisition,trainee physical fitness state assessment,physical fitness training program recommendation and airborne soldier physical fitness training program evaluation.The airborne soldier information acquisition module collected and analyzed the trainee physiological parameter information with a human body composition analyzer,clarified the parameter characteristics related to physical training with considerations on military physical training requirements and constructed a trainee physical fitness assessment parameter model;the trainee physical fitness state assessment module established an evaluation model based on machine learning to realize stage-by-stage physical fitness evaluation for airborne soldiers;the physical fitness training program recommendation module was constructed based on the physical training feature similarity algorithm and graph embedding theory to provide decision making assistance for program development of airborne military physical training;the airborne soldier physical fitness training program evaluation module compared the physical fitness and evaluation results before and after training by means of list and chart,and updated the training program based on the evaluation results by calling the physical training program recommendation module.Results The intelligent airborne soldier physical training system contributed to forming an individualized physical fitness training recommendation mechanism after trainee body evaluation,modifying training program based on comparison and feedback for stage-by-stage training evaluation,so as to decrease the incidence of military training-related injuries while increasing the training efficiency.Conclusion The system developed improves airborne soldier physical training in rationality and reliability,and provides references for intelligent military training of the PLA.[Chinese Medical Equipment Journal,2025,46(2):16-23]

BACKGROUND:Formononetin is an isoflavonoid compound widely found in red clover,astragalus,and chickweed,which has the ability to inhibit oxidative stress,inflammatory factor release,and apoptosis. OBJECTIVE:To investigate the effect of formononetin on interleukin-1β-induced chondrocyte injury and its mechanism. METHODS:(1) Cartilage tissues from patients with osteoarthritis and patients with simple meniscus injury were collected,and real-time quantitative PCR was used to detect miR-135b-5p expression. (2) Human chondrocytes were cultured in vitro,and then divided them into nine groups:cells in normal control group were cultured for 48 hours with no treatment;cells in interleukin-1β group were treated with interleukin-1β for 48 hours;cells in interleukin-1β+low-dose formononetin group were treated with 25 μmol/L formononetin for 24 hours followed by treatment with interleukin-1β for 48 hours;cells in interleukin-1β+middle-dose formononetin group were treated with 50 μmol/L formononetin for 24 hours followed by treatment with interleukin-1β for 48 hours;cells in interleukin-1β+high-dose formononetin group were treated with 100 μmol/L formononetin for 24 hours followed by treatment with interleukin-1β for 48 hours;cells in interleukin-1β+miR NC group were treated with miR NC for 6 hours followed by treatment with interleukin-1β for 48 hours;cells in interleukin-1β+miR-135b-5p group were treated with miR-135b-5p mimics for 6 hours followed by treatment with interleukin-1β for 48 hours;cells in interleukin-1β+high dose formononetin+anti-miR-NC group were treated with anti-miR-NC for 6 hours,then treated with 100 μmol/L formononetin for 24 hours,and finally treate with interleukin-1β for 48 hours;cells in interleukin-1β+high-dose formononetin+anti-miR-135b-5p group were treated with anti-miR-135b-5p for 6 hours,the treated with 100 μmol/L formononetin for 24 hours,and finally treated with interleukin-1β for 48 hours. Relevant tests are performed after treatment. RESULTS AND CONCLUSION:The expression level of miR-135b-5p in cartilage tissue of patients with osteoarthritis was significantly lower than that of patients with simple meniscus injury (P<0.05). Compared with the normal control group,the expression level of miR-135b-5p,proliferative ability,activity of superoxid dismutase,and expression levels of collagenase Ⅱ protein and Bcl-2 protein in chondrocytes were lower in the interleukin-1β group (P<0.05),while apoptotic rate,lactate dehydrogenase activity,malondialdehyde level,levels of proinflammatory factors,and expression levels of matrix metalloproteinase-13 protein and Bax protein were higher in the interleukin-1β group (P<0.05). Formononetin inhibited chondrocyte damage caused by interleukin-1β in a concentration-dependent manner. Transfection of miR-135b-5p mimics elevated miR-135b-5p expression in the interleukin-1β group and inhibited chondrocyte damage induced by interleukin-1β;transfection of anti-miR-135b-5p decreased miR-135b-5p expression in the interleukin-1β+high-dose formononetin group and inhibited the effect of formononetin on chondrocytes. To conclude,the protective effect of formononetin on chondrocyte injury induced by interleukin-1β may be related to the regulation of miR-135b-5p expression.

Objective To explore the variable pressure matress and thermoplastic mold applied to cone beam CT-guided radiotherapy of abdominal and pelvic cancer in terms of translation error,rotation angle error and setup reproducibility of patients with different body mass indexes(BMIs),so as to provide references for the selection of body fixation mode.Methods Totally 70 patients with abdominal and pelvic tumors admitted to some hospital from April 2021 to March 2022 were retrospectively selected,and divided into a variable pressure mattress group and a thermoplastic mold group according to the fixation method,with 35 patients in each group.All the patients in the two groups underwent examinations with cone beam computed tomography(CBCT)at the first radiotherapy treatment and during the course of the treatment,and the image registration was carried out between validation images and planning images.The two groups were compared in terms of rotation angle error and thranlation error at the directoins of x axis(lateral directions),y axis(cranial-caudal)and z axis(ventral-dorsal).Taking the center point image of the initial positioning as the reference,the errors of the center points of the two groups at z and y axes(Δz and Δy)were compared.The setup reproducibility was set as Δz≤5 mm and Δy≤3 mm,and the setup reproducibility rates of the two groups were summarized.All the patients were categorized into non-overweight ones(BMI<25 kg/m2)and overweight ones(BMI≥25 kg/m2),and the setup reproducibility rates of the patients with different BMIs were counted.SPSS 26.0 software was used for statistical analysis.Results The two groups had no significant differences in translation error at the directions of x and y axes(P>0.05).The variable pressure mattress group had the translation error at the direction of z axis statistically lower than that of the thermoplastic mold group(P<0.05).There were no significant differences between the two groups in rotation angle error(P=0.219 3).The two groups had significant differences in setup reproducibility(P=0.033 4).The non-overweight patients had the setup reproducibility rate being 40.00%in the variable pressure mattress group,and 77.14%in the thermoplastic mold group;the overweight patients had the setup reproducibility rate being 25.71%in the variable pressure mattress group and only 2.86%in the thermoplastic mold group,with the differences between the two groups being statistically significant(P=0.002 9).Conclusion The variable pressure mattress and thermoplastic mold both result in low setup errors when applied to fixation during the radiotherapy of abdominal and pelvic cancer,the thermoplastic mold fixation can be used for the patients with BMIs lower than 25 kg/m2 with decreased translation errors at the direction of z axis,and the variable pressure mattress fixation was suitable for the patients with BMIs not lower than 25 kg/m2.[Chinese Medical Equipment Journal,2025,46(7):45-50]

Tertiary lymphoid structures (TLSs), as a crucial component of the tumor micro-environment, have attracted significant attention in the field of tumor research in recent years. TLSs are composed of multiple immune cells and formed under the stimulation of chronic inflammation, with their maturation process divided into different stages. They exert anti-tumor effects by mimic-king the functions of secondary lymphoid organs and generating adaptive immune responses. In terms of the prognosis of gastric cancer, the cell composition, spatial distribution of TLSs, and their combination with other indicators are all helpful in predicting the prognosis of patients. Meanwhile, the TLSs scoring system is expected to become an index for evaluating the efficacy of immuno-therapy. Treatment strategies for inducing TLSs formation have achieved certain results in animal models, but potential treatment risks require attention. The authors elaborate on formation and maturation process of TLSs, anti-tumor mechanism, value in prognostic assessment of gastric cancer and multiple tumors, prediction of immunotherapy, as well as treatment strategies for inducing the formation of TLSs.