Objective To investigate the population density and seasonal fluctuations of Aedes albopictus in Guangzhou City, Guangdong Province, from 2021 to 2023, so as to provide insights into A. albopictus control and management of dengue fever. Methods The surveillance of A. albopictus density was performed in all surveillance sites assigned across all streets (townships) in Guangzhou City during the period from January to December from 2021 to 2023. The surveillance frequency was twice every half month from May to September, and once every month for the rest of a year. In each surveillance period, A. albopictus mosquito larvae were captured from indoor and outdoor small water containers in residential areas, parks, medical facilities, schools, other government sectors and social organizations, construction sites, special industries and others for mosquito species identification. Adult mosquitoes were captured using electric mosquito suction apparatus for species identification and gender classification. Adult mosquitoes and mosquito eggs were collected with mosquito and egg traps at the breeding and dwelling places of Aedes mosquitoes for identification. The mosquito oviposition index (MOI), Breteau index (BI), adult mosquito density index (ADI) and standard space index (SSI) were calculated. The A. albopictus density was classified into grades 0, 1, 2 and 3 in each surveillance site, with Grade 0 density defined eligible, and the eligible rate of A. albopictus density was calculated at all surveillance sites each year from 2021 to 2023. In addition, the changing trends in MOI, SSI, BI and ADI of A. albopictus were analyzed in Guangzhou City from 2021 to 2023. Results The eligible rates of A. albopictus density were 61.69%, 68.75% and 55.15% in surveillance sites of Guangzhou City from 2021 to 2023 (χ² = 297.712, P < 0.001), and appeared a tendency towards a reduction followed by a rise each year, which gradually reduced since January, maintained at a low level during the period between May and October, and gradually increased from November to December. The MOI, SSI, BI and ADI of A. albopictus all appeared a tendency towards a rise followed by a reduction in Guangzhou City during the period between January and December from 2021 to 2023. The BI of A. albopictus peaked in the first half of June in 2021 (4.03), the first half of July in 2022 (3.89) and the last half of August in 2023 (5.02), and the SSI of A. albopictus peaked in the last half of June in 2021 (0.93), the last half of May in 2022 (0.59), and the last half of June (0.94) and the first half of September in 2023 (1.12). In addition, the MOI of A. albopictus peaked in the first half of May in 2021 (8.64), the first half of June in 2022 (8.96), and the last half of May (10.21) and the last half of June in 2023 (10.89), and the ADI of A. albopictus peaked in the first half of June in 2021 (3.41), the last half of June in 2022 (4.06), and the first half of July in 2023 (3.61). Conclusions The density of A. albopictus is high in Guangzhou City during the period from May to October, and the risk of local outbreak caused by imported dengue fever is high. Persistent intensified surveillance of the density and seasonal fluctuation of A. albopictus is recommended and timely mosquito prevention and control is required according to the fluctuation in the A. albopictus density.

BACKGROUND: Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system. METHODS: In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables. RESULTS: These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect. CONCLUSIONS The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.

BACKGROUND: Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system. METHODS: In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables. RESULTS: These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect. CONCLUSIONS The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.

BACKGROUND: Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system. METHODS: In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables. RESULTS: These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect. CONCLUSIONS The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.

BACKGROUND: Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system. METHODS: In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables. RESULTS: These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect. CONCLUSIONS The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.

Objective To identify factors associated with gastrointestinal heat retention in preschool children,and to provide a foundational understanding for future clinical investigations. Methods A case-control study was performed,which involved children from kindergartens in the Longgang District of Shenzhen City,Guangdong Province,from May to July 2021. Using the Children's Gastrointestinal Heat Retention Diagnostic Self-assessment Scale,subjects were allocated into a case group (children diagnosed with gastrointestinal heat retention) and a control group (children without this condition). An online survey was used to collect data on dietary behaviors,caregivers' feeding behaviors,early antibiotic use,daily routines,and birth conditions. SPSS 27.0 software was used to facilitate precise sociodemographic matching and paired logistic regression analysis to explore the association between gastrointestinal heat retention and the above factors. Results From the analysis of 51,252 matched cases,the study found that several factors contributed to an increased risk of gastrointestinal heat retention. These factors included reduced food intake compared to peers,reports of picky eating by caregivers,distractions during meals,pronounced dietary preferences,disinterest in food,meal durations ≥ 25 min,reluctance to sample new foods,consistent refusal of specific food types for over one month,irregular meal locations,coercive feeding practices,use of micronutrient supplements,allowing children too much freedom in food choice,persuading children to eat,infrequent encouragement to experiment with new foods,early antibiotic introduction,inadequate sleep,and premature birth (P<0.05). In contrast,exclusive breastfeeding in the first six months,engagement in moderate to massive physical activity,and regular napping patterns were associated with a reduced risk of gastrointestinal heat retention (P<0.05). Conclusion The suboptimal dietary habits,improper feeding practices,insufficient physical activity,inadequate sleep,and premature antibiotic exposure may be significant risk factors for gastrointestinal heat retention. Future research dedicated to unraveling the cause of gastrointestinal heat retention should prioritize these elements.

Objective:To establish auto verification rules for the routine coagulation assays,and to provide reference for clinical laboratories to improve the quality and efficiency of results verification.Methods:A total of 24,510 specimens of sodium citrate anticoagulation routine coagulation test from the laboratory departments of eight hospitals including the First Medical Center,Chinese PLA General Hospital during January to March 2020 were collected and randomly divided into a rule establishment group and a rule verification group,with 6,670 specimens in the rule establishment group,including 2,056 Delta checks,and 17,840 specimens in the rule validation group,including 3,210 Delta checks.The activities of prothrombin time(PT),activated partial thromboplastin time(APTT),fibrinogen(Fib),thrombin time(TT),D-dimer(DD)and/or antithrombin(AT)were detected by Stago STA R Max automatic coagulation analyzer and supporting reagents.Taking the manual verification results as the standard,the auto verification and manual false negative rate(invalid verification),false positive rate(invalid interception),pass rate,positive coincidence rate,negative coincidence rate,verification consistency rate and specimen turnaround time(TAT)of the two groups were calculated.Results:The auto verification rules and the application process were preliminarily established,including internal quality control,alarm information,auto verification scope,critical value and deviation value inspection.In the rule establishment group,the single item pass rate was 82.6%-92.4%,and the overall pass rate was 73.8%.The consistency rate between auto verification and manual verification was 98.2%,and the positive coincidence rate and negative coincidence rate were 24.4%and 73.8%,respectively.In the rule verification group,the single item pass rate was 86.4%-91.5%,and the overall review pass rate was 71.5%.By simulating the application of auto verification rules,the average TAT of two hospitals among the eight hospitals was shortened by 1.5 hours and 2.1 hours,respectively.Conclusion:The application of auto verification rules can reduce workload of manual verification,and significantly shorten the TAT,and improve the report efficiency of the laboratory.

BACKGROUND: Periodontitis is a severe chronic inflammatory disease, whose traditional systemic antimicrobial therapy faces great limitations. In-situ gels provide an effective solution as an emerging local drug delivery system. METHODS: In this study, the novel thermosensitive poloxamer/carbopol in-situ gels loaded with 20 lmol/L quercetin for the treatment of periodontitis were prepared by cold method. Thirteen batches of in-situ gels based on two independent factors (X1 : poloxamer 407 and X2 : carbopol 934P) were designed and optimized by the statistical method of central composite design (CCD). The transparency, pH, injectability, viscosity, gelation temperature, gelation time, elasticity modulus, degradation rate and in-vitro drug release studies of the batches were evaluated, and the percentage of drug release in the first hour, the time required for 90% drug release, gelation temperature, and gelation time were selected as dependent variables. RESULTS: These two independent factors significantly affected the four dependent variables (p < 0.05). The optimization result displayed that the optimized concentration of poloxamer 407 was 20.84% (w/v), and carbopol 934P was 0.5% (w/v). The optimized formulation showed a clear appearance (++), acceptable injectability (Pass), viscosity(151,798 mPa s), gelation temperature (36 °C), gelation time (213 s), preferable cell viability and cell proliferation, conformed to first-order release kinetics, and had a significant antibacterial effect. CONCLUSIONS The article demonstrates the great potential of the quercetin in-situ gel as an effective treatment for periodontitis.

Epilepsy is a recurrent, transient seizure disorder of the nervous system that affects the intellectual development, life and work, and psychological health of patients. People with epilepsy worldwide experience great suffering. Stressful stimuli such as infection, mental stress, and sleep deprivation are important triggers of epilepsy, and chronic stressful stimuli can lead to frequent seizures and comorbidities. The hypothalamic-pituitary-adrenal (HPA) axis is the most important system involved in the body’s stress response, and dysfunction thereof is thought to be associated with core epilepsy symptoms and related psychopathology. This article explores the intrinsic relationships of corticotropin-releasing hormone, adrenocorticotropic hormone, and glucocorticoids with epilepsy in order to reveal the role of the HPA axis in the pathogenesis of epilepsy. We hope that this information will yield future possible directions and ideas for fully understanding the pathogenesis of epilepsy and developing antiepileptic drugs.