BACKGROUND:Developmental dysplasia of the hip often leads to limb deformities in children,and the research related to its diagnosis and treatment has been gradually clarified.Recently,the finite element method has been paid attention to by scholars in the research related to developmental dysplasia of the hip because of its advantages. OBJECTIVE:Through literature search and review of the relevant research progress of finite element method in children's developmental dysplasia of the hip and treatment,analyze and summarize its advantages and disadvantages,and explore the direction of further research in the future. METHODS:PubMed,SCI,CBM,and CNKI were searched for relevant articles published from January 2014 to November 2023 with the key words of"developmental dysplasia(dislocation)of the hip,dysplasia of the hip,finite element analysis(method),pavlik harness,fixation in herringbone position,biomechanics,pelvic osteotomies,pemberton,salter,dega,periacetabular osteotomy,children"in Chinese and English.A small number of long-term articles were included,and 62 articles were finally included for analysis through screening. RESULTS AND CONCLUSION:(1)The mechanical environment of hip joint in children with developmental dysplasia of the hip was abnormal.The pressure in acetabulum was uneven.The stress increased and concentrated;the joint contact area decreased,and the local stress concentrated in femoral neck.(2)In the Pavlik sling and herringbone fixation,the mechanical environment of the hip was improved;the concentrated high stress area disappeared and the joint contact area increased,but the excessive abduction angle led to the increase of stress in the acetabulum and the lateral femoral head.(3)After pelvic osteotomy,the stress environment of hip joint and sacroiliac joint was improved.There was no single hinge in the three kinds of osteotomy,and the stress load position was different according to the age of the children.(4)After peri-acetabular osteotomy,the joint contact pressure was close to normal,but it was difficult to recover in patients with non-spherical femoral head.(5)The postoperative X-ray film findings could not show that the joint contact mechanics was the best.(6)It is indicated that the information that cannot be measured in the body can be obtained by using the finite element method,which can be operated in a virtual environment without the limitation of time and ethics.It can directly see the stress change area of normal and developmental dysplasia of the hip,explain the effectiveness of treatment from the point of view of mechanics,establish a specific finite element model and tailor-made operation plan for patients who need osteotomy.There is no standard or unified standard for the finite element modeling of developmental dysplasia of the hip and the material characteristic parameters of children's hip joint.Due to the inherent limitations of finite element method,it is impossible to analyze the model that contains bone,cartilage,ligament,muscle and other elements at the same time.The operation of finite element analysis is difficult,although it has advantages,it is not universal,and the current research sample size is small,which needs to be further expanded and verified.

OBJECTIVE: To summarize the research and clinical application progress of foot lengthening surgery. METHODS: Relevant research literature on foot lengthening surgery in recent years at home and abroad was reviewed, and a summary was made from aspects such as the types of lengthening surgery, the types of foot diseases treated by clinical application, effectiveness, and complications. RESULTS: Bone defects and shortening deformities of the foot are relatively common clinically. As an innovative treatment method, foot lengthening surgery has gradually attracted attention, mainly including the Ilizarov technique and one-stage bone grafting lengthening surgery. The former promotes bone regeneration based on the tension-stress principle and is widely used in the treatment of calcaneal defects and congenital metatarsal brachymetatarsia, achieving good curative effects. However, there are also complications such as pin-tract infection, joint stiffness and contracture, non-union and delayed union of bone, re-fracture, and alignment deviation. The latter has a short treatment cycle, but the lengthening length is limited. Bone graft resorption and soft tissue complications are its main complications. CONCLUSION Foot lengthening surgery will develop towards the direction of personalization, intelligence, and precision. With the help of multi-center research, biological materials, and intelligent technologies, the effectiveness and safety will be further improved to better restore the function and appearance of the foot.
Humans ; Bone Transplantation/methods* ; Bone Lengthening/methods* ; Ilizarov Technique ; Osteogenesis, Distraction/methods* ; Foot Deformities/surgery* ; Postoperative Complications ; Treatment Outcome ; Foot/surgery*

Myocardial fibrosis is a serious cause of heart failure and even sudden cardiac death. However, the mechanisms underlying myocardial ischemia-induced cardiac fibrosis remain unclear. Here, we identified that the expression of sterile alpha and TIR motif containing 1 (SARM1), was increased significantly in the ischemic cardiomyopathy patients, dilated cardiomyopathy patients (GSE116250) and fibrotic heart tissues of mice. Additionally, inhibition or knockdown of SARM1 can improve myocardial fibrosis and cardiac function of myocardial infarction (MI) mice. Moreover, SARM1 fibroblasts-specific knock-in mice had increased deposition of extracellular matrix and impaired cardiac function. Mechanically, elevated expression of SARM1 promotes the deposition of extracellular matrix by directly modulating P4HA1. Notably, by using the Click-iT reaction, we identified that the increased expression of ZDHHC17 promotes the palmitoylation levels of SARM1, thereby accelerating the fibrosis process. Based on the fibrosis-promoting effect of SARM1, we screened several drugs with anti-myocardial fibrosis activity. In conclusion, we have unveiled that palmitoylated SARM1 targeting P4HA1 promotes collagen deposition and myocardial fibrosis. Inhibition of SARM1 is a potential strategy for the treatment of myocardial fibrosis. The sites where SARM1 interacts with P4HA1 and the palmitoylation modification sites of SARM1 may be the active targets for anti-fibrosis drugs.

L-citrulline is a nonprotein amino acid that plays an important role in human health and has great market demand. Although microbial cell factories have been widely used for biosynthesis, there are still challenges such as genetic instability and low efficiency in the biosynthesis of L-citrulline. In this study, an efficient, plasmid-free, non-inducible L-citrulline-producing strain of Escherichia coli BL21(DE3) was engineered by combined strategies. Firstly, a chassis strain capable of synthesizing L-citrulline was constructed by block of L-citrulline degradation and removal of feedback inhibition, with the L-citrulline titer of 0.43 g/L. Secondly, a push-pull-restrain strategy was employed to enhance the L-citrulline biosynthesis, which realized the L-citrulline titer of 6.0 g/L. Thirdly, the NADPH synthesis and L-citrulline transport were strengthened to promote the synthesis efficiency, which achieved the L-citrulline titer of 11.6 g/L. Finally, fed-batch fermentation was performed with the engineered strain in a 3 L fermenter, in which the L-citrulline titer reached 44.9 g/L. This study lays the foundation for the industrial production of L-citrulline and provides insights for the modification of other amino acid metabolic networks.
Citrulline/biosynthesis* ; Escherichia coli/genetics* ; Metabolic Engineering/methods* ; Fermentation ; NADP/biosynthesis*

The complex anatomy and variations of the biliary system make biliary surgery the operation with the lowest error tolerance in abdominal surgery. With the advent of surgery 4.0 represented by artificial intelligence, 5G technology, and medical big data, biliary surgery has ushered in new development opportunities. Although surgery 4.0 provides high-precision navigation tools for biliary surgery, most of its potential remains untapped. The reason lies in that current technical applications mainly focus on single clinical scenarios. Only by expanding multi-dimensional application scenarios guided by clinical needs can biliary surgery achieve leapfrog development with the help of surgery 4.0. In this process, it is more necessary to cultivate compound and innovative surgical talents through medical-education collaboration, continuously injecting innovative momentum into the deep integration of surgery 4.0 technology and the field of biliary surgery.

Addressing the challenge of traditional physical/semi physical simulation methods being difficult to achieve full process and full element simulation of extravehicular activities,virtual reality technology is utilized to break through the limitations of physical environments and establish a virtual reality simulation system for extravehicular activities.Based on the application characteristics of space station extravehicular activity engineering,with the goal of improving system practicality and usability,integrating the visual immersion of virtual images,the ontology of real operation,and the consistency of virtual and real space perception,a three-dimensional scene simulation,multi-mode joystick interaction paradigm,continuous operation actions simulation of extravehicular operations,and interactive operation virtual/real space consistency method that were proposed and designed for the realistic visual perception and extravehicular operation.The system has been successfully applied to astronaut training,program validation,joint exercise,and flight control support for sixteen extravehicular activities from SZ-12 to SZ-18.The results showed that the complete reproduction of the static/dynamic realistic comprehensive scene was achieved on the ground for the human-machine operation in the entire process of extravehicular activity,and the system is an essential and important means of ground simulation for extravehicular activity.

Objective To analyze the trends in disease burden and risk factors of depression among the elderly population in China from 1990 to 2021,and to provide a theoretical basis for the prevention,treatment,and policy-making of geriatric depression in China.Methods Data on the disease burden of geriatric depres-sion in China from 1990 to 2021,including the number of incident cases,disability-adjusted life years(DALYs),incidence rate,and DALY rate,were extracted from the 2021 Global Burden of Disease(GBD)database.The Joinpoint regression model was used to analyze the trends by calculating the annual percentage change(APC)and average annual percentage change(AAPC).The autoregressive integrated moving average(ARIMA)model was employed to predict the disease burden of geriatric depression over the next five years.Population attributable fractions(PAFs)were used to describe the risk factors for geriatric depression in China in 1990 and 2021.Results From 1990 to 2021,the number of incident cases and the incidence rate of geri-atric depression in China showed an overall upward trend.The most significant increase in incidence was ob-served in the 60-64 age group,while the prevalence rate increased notably in the ≥ 95 age group.The DALY rate showed the most pronounced upward trend in the 65-69 age group.The incidence,prevalence,and DALY rates of geriatric depression were higher in women than in men.Major risk factors included child-hood sexual abuse and intimate partner violence,with the impact of intimate partner violence being particular-ly significant among women.The ARIMA model predicted that the incidence,prevalence,and DALY rates of geriatric depression in China would decline over the next five years,with a greater decline observed in women than in men.Conclusions From 1990 to 2021,the incidence,prevalence,and DALY rates of geriatric de-pression in China showed an overall upward trend,with higher rates observed in women than in men.Greater attention should be paid to the elderly female population,with a focus on early prevention to reduce the dis-ease burden of geriatric depression.

BACKGROUND:Exercise is an effective method for preventing and treating osteoporosis,but it is unclear whether its effect on postmenopausal osteoporosis is related to changes in bone autophagy levels. OBJECTIVE:To observe the effects of exercise via cellular autophagy on the morphology and mechanical properties of bone tissue in ovariectomized rats,and to explore the mechanism of exercise on bone mass in ovariectomized rats from the perspective of autophagy. METHODS:A rat model of postmenopausal osteoporosis was established,and a 24-week moderate-intensity exercise was used for intervention.After the experiment,serum estradiol levels were measured by ELISA,and bone mineral density and bone microstructure of the cortical and trabecular bone were detected by micro-CT.The biomechanical indicators of the tibia were tested by a three-point bending test.Autophagosomes were observed by transmission electron microscopy.The expression of LC3 and ATG7 proteins was analyzed by western blot. RESULTS AND CONCLUSION:The serum estradiol level in the ovariectomized group was significantly lower than that of the sham-operation group and ovariectomized+exercise group(P＜0.01).The body mass of rats in each group increased,and the order was the ovariectomized group＞the ovariectomized+exercise group＞the sham-operation group＞the sham-operation+exercise group.The bone mineral density and bone mass of rats in all groups significantly increased(P＜0.01),but the increase in the ovariectomized group was significantly lower than that of the other groups,and the increase in the ovariectomized+exercise group was significantly higher than that of the ovariectomized group.Compared with the sham-operation group,the bone mineral density of the tibial cancellous bone in the sham-operation+exercise group was significantly increased(P＜0.01),while the bone mineral density in the ovariectomized and ovariectomized+exercise groups was significantly decreased(P＜0.01).Compared with the ovariectomized+exercise group,the ovariectomized group showed significantly lower bone volume fraction,number of trabeculae,and bone mineral density of cancellous bone(P＜0.05),extremely significantly lower trabecular thickness(P＜0.01),and significantly higher mean trabecular pattern factor,trabecular separation,and structural model index(P＜0.01).Compared with the ovariectomized group,the LC3-Ⅱ/LC3-I ratio and the relative expression of ATG7 protein significantly increased in the ovariectomized+exercise group(P＜0.05).Compared with the sham-operation and ovariectomized groups,the number of autophagosomes increased in the sham-operation+exercise and ovariectomized+exercise groups,respectively.To conclude,moderate-intensity treadmill exercise can improve the bone microstructure and biomechanical properties of the tibial cancellous bone and increase bone mass in ovariectomized rats by increasing serum estradiol levels and bone autophagy levels.

BACKGROUND:Currently,the verification of the precision of personalized bone models is usually performed by methods such as paired t-tests or intraclass correlation coefficient,but such methods often require the production of large batches of models,which do not satisfy the need for immediate use of personalized models. OBJECTIVE:To study the feasibility of establishing the equivalent model to verify the precision of the personalized bone model rapidly. METHODS:Bone CT images of three adults were randomly obtained for reconstruction.3D printing was used to create personalized bone models,and then the personalized bone models were scanned using CT and reconstructed.Mimics was used to compare the reconstructed models of bone CT images with the bone CT images.Geomagic Studio was used to analyze the fitting deviation between the reconstruction model of personalized bone model CT image and the reconstruction model of skeletal CT image.The 3D-printed personalized bone model was measured against the measurement positions and dimensions marked on the reconstruction model of skeletal CT image,and the error was calculated. RESULTS AND CONCLUSION:(1)By comparing the reconstructed bone CT image model with the bone CT scan image,the two were compatible in terms of anatomical structure and morphology,and the contours almost overlapped.(2)By fitting bias analysis,the standard bias was 0.176,0.226,and 0.143 mm in order,and all the results were<0.25 mm.(3)By measuring and calculating the model,the mean relative errors were 0.44%,0.21%,and 0.13%,and all the results were within 5%error.(4)The constructed equivalent model was in line with the basic conditions for making personalized bone models.The established equivalent model met the clinical needs and design requirements,and it was feasible to use the method of the equivalent model to verify the precision of the personalized bone model quickly.(5)This method could provide a targeted and rapid way to verify the precision of personalized bone models.It could achieve the goal of providing immediate clinical use without the need to produce large batches of models compared to conventional methods such as paired t-tests or intraclass correlation coefficient.

Objective To discuss the application effect of using a stone extractor balloon catheter to assist in crossing the anastomotic stenosis in treatment of anastomotic biliary stenosis after liver transplantation using endoscopic retrograde cholangiopancreatography(ERCP).Methods Clinical data of 48 patients who developed anastomotic biliary stenosis after liver transplantation and underwent ERCP treatment were collected.Upon unsuccessful use of a dilation catheter to cross the stricture,attempts were made to cross the anastomotic biliary stenosis by using a stone extractor balloon catheter.The success rate of the procedure was recorded,intraoperative conditions were observed,treatment outcomes and complications were analyzed.Results The main presenting symptoms in the 48 patients on admission were abdominal discomfort(32 patients),fever(7 patients),pruritus(4 patients),jaundice(3 patients),and no obvious symptoms(2 patients).Preoperative magnetic resonance cholangiopancreatography(MRCP)examination revealed isolated stricture of the anastomotic site in 35 cases,and stricture associated with stones in 13 cases.Using the stone extractor balloon catheter as a guide,guidewire crossing of the anastomotic stenosis was successful in 26 cases,resulting in a success rate of 54.17%(26/48).Through statistical analysis of the successful group and the failed group,there was a significant difference in whether the distal biliary dilatation between the two groups,and the difference was statistically significant(χ2 = 8.39,P = 0.004).In the 26 successfully treated cases,alanine transaminase(ALT),aspartate transaminase(AST),γ-glutamyl transpeptidase(γ-GT),alkaline phosphatase(ALP),and total bilirubin(TBiL)levels decreased significantly 48 hours after the procedure(P<0.05),and no serious complications occurred.Conclusion The use of a stone extractor balloon catheter significantly increases the success rate of crossing anastomotic stenosis in the treatment of anastomotic biliary stenosis after liver transplantation,especially in cases with distal dilatation of the common bile duct.This approach is safe and worth promoting.