A novel fumigation moxibustion device has been designed to enable adjustable and controllable moxa smoke temperature, maintaining a relatively stable fumigation temperature while improving the utilization efficiency of moxa smoke. The device consists of five main components: a temperature control chamber, fumigation outlet, temperature measurement module, moxa smoke filtration chamber, and elastic band. It is compact, refined, and easy to operate. The device allows users to set the desired fumigation temperature according to therapeutic needs and simultaneously filters and eliminates residual moxa smoke after treatment. This design addresses the challenges of traditional fumigation moxibustion therapy, including unstable moxa smoke temperature, difficulty in regulation, low utilization efficiency, and high dependence on manual operation. It contributes to the promotion and application of fumigation moxibustion therapy and supports the establishment of a standardized moxibustion system.
Moxibustion/methods* ; Humans ; Equipment Design ; Fumigation ; Temperature

Objective:To establish an evaluation model for occupational hazard prevention and control levels in coal mines, to explore the combination of Analytic Hierarchy Process (AHP) and fuzzy comprehensive evaluation, to evaluate the overall situation of occupational hazard prevention and control in coal mines.Methods:In November 2021, Collect information of occupational hazards and their prevention and control status in 30 coal mines. AHP model was first constructed for the elements of occupational hazard prevention and control in coal mines. Then, the AHP and fuzzy comprehensive evaluation method was applied to comprehensively evaluate and grade the occupational hazard prevention and control in coal mines, using the principles of maximum membership and weighted average.Results:The hierarchical fuzzy comprehensive evaluation results for typical coal mine were basically consistent with its occupational hazard prevention and control situation. The dust prevention and control situation was good, the noise prevention and control situation is average, the occupational health monitoring situation was good, the occupational health management situation was average, and the overall level of occupational hazard prevention and control was good.Conclusion:The hierarchical fuzzy comprehensive evaluation model for occupational hazard prevention and control levels, combined with the principles of maximum membership and weighted average, can objectively evaluate and reflect the overall situation of occupational hazard prevention and control in coal mines.

Background Photovoltaic (PV) cells can convert solar energy into electricity and alleviate the dilemma of energy supply shortage. Shanghai's PV module industry is booming, but there are few reports on the health status of the workers and there is an urgent need for health risk assessment. Objective To evaluate the health status of PV module production workers and the association between work and health status, in order to provide a direction for the health management of the workers. Methods Among the PV module production workers who completed prescriptive occupational health examination by a designated medical institution in 2021, 2453 workers with more than one year of working age were selected as the exposure group and 538 newly hired workers as the control group. On the basis of the Technical specifications for occupational health surveillance (GBZ 188−2014), the health examination included physical examination and laboratory examination and information such as sociodemographics, living habits, and disease history. We compared the indicators of pure-tone hearing test, blood routine examination, electrocardiogram (ECG), liver function, and kidney function between the two groups. The blood routine results included erythrocyte-related indicators, leukocyte-related indicators, and platelet-related indicators, and the results of liver function included hepatocyte injury indicators, hepatic secretory function indicators, and hepatic synthesis function indicators. The workers were divided into four groups by quartiles of working age. Trend chi-square test was used to analyze differences in health status between the four working age groups. Multiple logistic regression models were used to evaluate the association between working age and health indicators. Results Among the exposure group workers, 2035 (83.0%) were male and 418 (17.0%) were female. The median (P₂₅, P₇₅) age was 34.0 (30.0, 39.0) years and the median (P₂₅, P₇₅) working age was 6.0 (3.0, 10.0) years. The abnormality rate of blood routine was 61.7%. Among them, the abnormality rates of platelet-related indicators and liver secretory function indicators were 39.8% and 48.1% respectively. The risks of abnormal hepatocyte injury-related indicators, fatty liver, and platelet-related indicator abnormalities among the exposure group were 1.471 (95%CI: 1.060, 2.054), 1.691 (95%CI: 1.208, 2.385), and 7.576 (95%CI: 4.967, 11.994) times higher than those in the control group respectively. The single-factor analysis demonstrated a positively linear trend between working age and hypertension prevalence, electrical audiometry abnormality rate, or liver secretory function indicator abnormality rate. Corrected for gender, age, smoking status, hypertension, etc., the results of logistic analysis showed that quartile working age was positively related to abnormal liver secretion function and abnormal platelet-related indicators respectively (OR=1.047, P=0.005; OR=1.037, P=0.014), and inversely associated with the abnormal rate of renal function (OR=0.953, P=0.044). Conclusion Negative associations between health status and working age are identified in PV module production workers. The target PV module production employees are in younger age, and with the increase of working age, the abnormalities of liver function and platelets may increase. Therefore, the enterprises should extend occupational health work from workplace to workers.

Objective To investigate the therapeutic effects of bone marrow mesenchymal stem cells (BMSCs) for radiation-induced lung injury (RILI) and the underlying mechanism. Methods Forty-five healthy adult male C57BL/6 mice were randomly divided into control, model, and BMSCs groups. The model and BMSCs groups received a single irradiation dose of 20 Gy to the chest, while the control group did not receive X-ray irradiation. For the BMSCs group, an injection of 1 × 10⁶ BMSCs cells was administered via the tail vein within 6 h after irradiation. In the 5th week, the lung tissue was taken to observe pathological changes with HE staining; examine the expression of the inflammatory factors interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α) with immunohistochemical staining; observe the polarization of macrophages with immunofluorescence staining; and measure the expression of the epithelial-mesenchymal transition markers E-cadherin, N-cadherin, and vimentin proteins by Western blot. Results After radiation, the model group developed pulmonary vasodilation and congestion with septal thickening and inflammatory cell infiltration, and these changes were markedly reduced in the BMSCs group. The model group showed significantly down-regulated expression of IL-6 and TNF-α compared with significantly increased levels in the model group (P < 0.01, P < 0.05). Treatment with BMSCs significantly increased the polarization of lung macrophages towards the M2 type, while significantly decreasing the abnormally increased N-cadherin and vimentin levels in RILI mice (P < 0.05, P < 0.01). Conclusion BMSCs have therapeutic effects for RILI mice, which may be through promoting macrophage polarization from M1 to M2.

Objective To investigate the role of hydrogen therapy in reducing radiation-induced lung injury and the specific mechanism. Methods Forty C57BL/6 mice were randomly divided into four groups: normal control group, model group, hydrogen therapy group I, and hydrogen therapy group II. A mouse model of radiation-induced lung injury was established. The pathological changes in the lung tissue of the mice were examined with HE staining. Immunofluorescence staining was used to detect the expression of surface markers of M1 and M2 macrophages to observe macrophage polarization. The expression of interleukin (IL)-6, tumor necrosis factor-α (TNF-α), and IL-10 in the lung tissue was measured by immunohistochemistry. The expression of nuclear factor-kappa B (NF-κB) p65 and phosphorylated NF-κB (P-NF-κB) p65 was measured by Western blot. Results HE staining showed that compared with the control group, the model group exhibited alveolar septal swelling and thickening, vascular dilatation and congestion, and inflammatory cell infiltration in the lung tissue; the hydrogen groups had significantly reduced pathological damage and inflammatory response than the model group, with more improvements in hydrogen group II than in hydrogen group I. Immunohistochemical results showed that compared with those in the control group, the levels of the inflammatory cytokines IL-6 and TNF-α were significantly increased in the model group; the hydrogen groups showed significantly decreased IL-6 and TNF-α levels and a significantly increased level of the anti-inflammatory factor IL-10 than the model group, which were more marked in hydrogen group II than in hydrogen group I. Immunofluorescence results showed that compared with the control group, the expression of the surface marker of M1 macrophages in the model group was significantly upregulated; the hydrogen groups showed significantly downregulated M1 marker and significantly upregulated M2 marker, and hydrogen group II showed significantly increased M2 marker compared with hydrogen group I. Western blot results showed that compared with that in the control group, the ratio of P-NF-κB p65/NF-κB p65 in the model group was significantly increased; the P-NF-κB p65/NF-κB p65 ratio was significantly reduced in the hydrogen groups than in the model group, and was significantly lower in hydrogen group II than in hydrogen group I. Conclusion Hydrogen inhalation therapy may reduce the inflammatory response of radiation-induced lung injury by inhibiting the NF-κB signaling pathway to promote the polarization of the macrophage M1 subtype to the M2 subtype.

Objective:To establish an evaluation model for occupational hazard prevention and control levels in coal mines, to explore the combination of Analytic Hierarchy Process (AHP) and fuzzy comprehensive evaluation, to evaluate the overall situation of occupational hazard prevention and control in coal mines.Methods:In November 2021, Collect information of occupational hazards and their prevention and control status in 30 coal mines. AHP model was first constructed for the elements of occupational hazard prevention and control in coal mines. Then, the AHP and fuzzy comprehensive evaluation method was applied to comprehensively evaluate and grade the occupational hazard prevention and control in coal mines, using the principles of maximum membership and weighted average.Results:The hierarchical fuzzy comprehensive evaluation results for typical coal mine were basically consistent with its occupational hazard prevention and control situation. The dust prevention and control situation was good, the noise prevention and control situation is average, the occupational health monitoring situation was good, the occupational health management situation was average, and the overall level of occupational hazard prevention and control was good.Conclusion:The hierarchical fuzzy comprehensive evaluation model for occupational hazard prevention and control levels, combined with the principles of maximum membership and weighted average, can objectively evaluate and reflect the overall situation of occupational hazard prevention and control in coal mines.

Objective Comprehensively analyzing the epilepsy-related genes by bioinformatics methods,and to explore their functions based on network and pathway analysis.Methods I Collected epilepsy-related genes through OMIM,DisGeNET,GeneCards databases and literatures deposited in PUBMED.Performed gene ontology(GO)and pathway enrichment analysis using"ClusterProfiler"R package,and the correlation between pathways was identified through pathway crosstalk analysis.Epilepsy-related genes were then mapped to human protein-protein interaction network(PPIN)to obtain epilepsy-specific PPIN,and extracted the hub and potential genes based on network topology.Results A total of 572 epilepsy-related genes were collected,642 significant GO biological process items and 80 Kyoto Encyclopedia of Genes and Genomes(KEGG)pathways,including learning,memory and cognition,were obtained by enrichment analysis.Based on PPIN analysis,10 hub genes of the epilepsy were extracted and most of them are gamma-aminobutyric acid(GABA)receptor genes.By integrating PPIN and WGCNA analysis,17 potential genes were extracted,involving heat shock protein,growth factor receptor binding protein,etc.Conclusion Epilepsy is a complex process,involving the abnormality of multiple functional genes,multiple biological processes and pathways are closely contact through multiple functional genes,and collectively lead to the occurrence of epilepsy.

A fixation device for experimental rat in moxibustion was developed. Using this device, the points for moxibustion can be fully exposed, and the temperature of moxibustion be relatively constant. This fixation device consists of three parts: fixation seat, fixation clip and moxa-stick holder; characterized as the flexible fixation and easy operation. The device is advantaged at simultaneous operation of moxibustion at many points and supports the point combinations. It makes up for the shortcomings of the existing fixation devices, reduces the workload of moxibustion in experimental rat and improves the work efficiency and experimental safety of experimenters.
Animals ; Rats ; Moxibustion/methods* ; Equipment Design ; Acupuncture Points ; Humans ; Male ; Rats, Sprague-Dawley

Objective:To explore the effect of hallux nail flap design assisted with 3D printing in reconstruction of thumb defect in degloving injury.Methods:From January 2020 to March 2022, 16 patients with thumb defect caused by degloving injury with intact digit flexor and extensor tendons were treated. The patients were 11 males and 5 females, aged 20 to 52 years old, with an average age of 31 years old. The injured patient's hands were firstly scanned by CT and the 3D models were created to map the profile of the tissues required for reconstruction. Photopolymer templates for the defects in thumb were then 3D printed. The printed templates were put on the great toes and accordingly the hallux nail flaps were designed and harvested. The degloving wound of thumb was repaired by the hallux nail flap. Donor sites were repaired with artificial dermis in 6 patients and with ilioinguinal flaps in 10 patients. The effect of surgery was observed at outpatient clinic during postoperative follow-up. The survival of the hallux nail flap and the recovery of the donor site were observed. Function recovery were evaluated according to the Evaluation Standard of Finger Replantation and Reconstruction of Hand Surgery Society of Chinese Medical Association.Results:All the harvested hallux nail flaps matched with the profiles of recipient sites. All the hallux nail flaps survived over 4 to 30 months of follow-up, in an average of 16 months. Appearance of all hallux nail flaps was similar to normal thumbs, with good fingerprint and nails. Sensation recovery were S 3-S 4, with TPD at 4-7 mm. According to the Evaluation Trial Standards of Upper Limb Partial Functional of Hand Surgery of Chinese Medical Association, 15 thumbs were excellent and 1 was good. Conclusion:Application of 3D printing assisted hallux nail flap transfer in reconstruction of defect of thumb in degloving injury can precisely design and harvest the required tissue and minimise a damage to the donor great toe. It improves the appearance of thumb as well as patient satisfaction. It is practical in reconstruction of the defect of thumb in degloving injury.

Objective To investigate the characteristics and liver function of the population with occupational exposure to hepatotoxicants. Methods A total of 17 093 workers with occupational hepatotoxicants exposure who underwent occupational medical examination during their employment in a occupational medical examination institution of Shanghai in 2021 were selected as the research subjects by judgement sampling method. Occupational medical examination data were collected, and the prevalence of abnormal liver function and fatty liver were analyzed. The association between hepatotoxicants exposure and abnormal liver function were analyzed. Results The median and the 0th-100th percentiles of the duration of exposure to hepatotoxicants was 6.5(1.0-42.0) years. The prevalence of fatty liver was 48.4% and the incidence of abnormal liver function was 23.7%. Among the workers with fatty liver, the prevalence of abnormal liver function was higher in workers exposed to metals, metalloids and their compounds than in unexposed workers (33.9% vs 30.0%, P<0.01). The results of multivariate logistic regression analysis demonstrated that the risk of abnormal liver function increased with the number of different hepatotoxicants mixed exposures (all P<0.01), after correcting for confounding factors including gender, age, years of exposure, marital status, drinking, hypertension, fatty liver and blood sugar. Conclusion Exposure to hepatotoxicants is a risk factor for abnormal liver function. The more diverse types of hepatotoxicants an individual is exposed to, the stronger the association with this risk.