Objective To explore the detection rate and distribution characteristics of gene mutations in pa-tients with non-small cell lung cancer,and to analyze their relationship with clinicopathological characteristics.Methods The genetic testing results and clinicopathological data of 213 patients with non-small cell lung cancer who underwent high-throughput genetic testing at the Gene Detection Center,Changchun Cancer Hos-pital from April 2020 to December 2023 were collected.High-throughput sequencing technology was used to detect mutations in 26 genes,and the relationship between the mutation frequency and its distribution and the clinicopathological characteristics of patients was analyzed.Results Among 213 patients with non-small cell lung cancer,192 cases(90.14％)had at least one gene mutation detected.Among them,the genes with rela-tively high mutation frequencies were TP53(60.56％),EGFR(46.48％),KRAS(14.55％),ALK fusion(11.74％),and PIK3CA(8.92％).There were 132 cases(30.28％)of evidence level for Class 1 drugs and 11 cases(2.52％)of evidence level for Class 2 drugs.The incidence of EGFR gene mutations was higher in women,non-smokers and patients with lung adenocarcinoma(P＜0.05).TP53 mutations usually occured in women,smokers and patients with stage Ⅳ.ALK mutations were more common in young patients,while KRAS mutations were more frequently seen in male smokers.Conclusion Analyzing the distribution charac-teristics of gene mutations in non-small cell lung cancer and their relationship with clinicopathological charac-teristics can provide a scientific basis for further optimizing genetic testing for patients with non-small cell lung cancer and offer guidance for clinical treatment.

Objective To investigate the acupoint selection patterns for treating diabetic cardiac autonomic neuropathy(DCAN)using data mining techniques,providing evidence for clinical practice.Methods Literature on acupuncture treatment for DCAN was retrieved from CNKI,Wanfang,VIP,and PubMed.The publication dates of the included literature ranged from the inception of each database to April 2024.Descriptive analysis,association rule analysis,and cluster analysis were performed on acupoint prescriptions,with the selection patterns of meridians and acupoints were summarized.Results A total of 27 articles were included,involving 18 acupoints.The top 10 high-frequency acupoints were Neiguan(PC6),Xinshu(BL15),Pishu(BL20),Zusanli(ST36),Sanyinjiao(SP6),Shenmen(HT7),Taixi(KI3),Lingtai(GV10),Shendao(GV11),and Shenshu(BL23).The primary meridians selected were the bladder meridian of foot-taiyang and the pericardium meridian of hand-jueyin.Specific acupoint categories predominantly included back-shu points and five transport points.Association rule and cluster analyses identified core acupoint combinations centered on Xinshu,Neiguan,Pishu,and Zusanli.Conclusion The core acupoint combination for treating DCAN with acupuncture comprises Xinshu,Neiguan,Pishu,and Zusanli.

Objective To explore the medication rules of Professor Li Huilin in treating Hashimoto's thyroiditis(HT)complicated with hypothyroidism using data mining techniques based on the R language.Methods Prescription data of the patients with HT complicated with hypothyroidism treated by Professor Li Huilin in outpatient clinics from March 2023 to March 2024 were collected.A database was established using Microsoft Excel 2021,and R language was employed to analyze the frequency,efficacy,properties and flavors,and meridian tropism of the medicinals from Chinese herbal prescriptions.Additionally,correlation analysis,association rule analysis,and cluster analysis were performed on the medicines from Chinese herbal prescriptions.Results A total of 57 Chinese herbal prescriptions involving 125 medicinals with 782 medication frequencies were included.The top 10 frequently-used medicinals were Glycyrrhizae Radix et Rhizoma Praeparata cum Melle(Zhigancao),Angelicae Sinensis Radix(Danggui),Atractylodis Macrocephalae Rhizoma(Baizhu),Astragali Radix(Huangqi),Bupleuri Radix(Chaihu),Cinnamomi Ramulus(Guizhi),Leonuri Herba(Yimucao),Paeoniae Radix Alba(Baishao),Poria(Fuling),and Fici Simplicissimae Radix(Wuzhimaotao).Most of the medicinals had therapeutic action of tonifying deficiency.The analysis of properties and flavors showed that the majority of medicinals were mild or warm in nature,and sweet in flavor.The top three meridians having the tropism of medicinals were the liver,lung,and spleen meridians.Correlation analysis identified five strongly-correlated herbal combinations.Association rule mining revealed a core herbal combination consisting of seven medicinals of Zhigancao,Huangqi,Danggui,Chaihu,Codonopsis Radix(Dangshen),Baizhu,and Cyperi Rhizoma(Xiangfu).Cluster analysis of medicinals with a frequency of≥5 yielded five groups of herbal combination.Conclusion For the treatment of HT complicated with hypothyroidism,Professor Li Huilin follows the principle of addressing the root cause of the disease,and focuses on strengthening the spleen and replenishing qi.Moreover,attention is given to soothing the liver and regulating qi,harmonizing qi and blood simultaneously,and treating symptoms and root cause simultaneously.

Objective:To investigate whether the image quality of total-body PET/CT (TB PET/CT) with 1 min acquisition can meet the clinical diagnostic requirements.Methods:From May 2019 to September 2021, a total of 90 malignant tumor patients (60 males, 30 females, age 31-86 years) with primary lesions confirmed by pathological diagnosis in Zhongshan Hospital, Fudan University were respectively analyzed. All patients underwent conventional PET/CT (C PET/CT) scan with conventional clinical acquisition and TB PET/CT scan with 1 min acquisition after injecting 18F-FDG in random order. Paired t test or Wilcoxon signed rank test was used to analyze the image quality of these two scans. Results:SUV max of primary lesions in TB PET/CT group was significantly higher than that in C PET/CT group (15.9(7.9, 24.6) vs 12.5(5.8, 16.6); z=8.14, P<0.001), so were signal-to-noise ratio (SNR) of the blood pool, liver, muscles (9.3±3.0, 11.4(9.5, 14.2), 8.3(7.3, 10.1) vs 6.2±1.7, 9.4(7.7, 11.8), 6.0(4.9, 7.1)), tumor-to-blood pool ratio (TBR) (9.3(4.3, 14.8) vs 8.5(4.3, 11.1)), tumor-to-liver ratio (TLR) (6.7(3.0, 10.4) vs 6.1(2.9, 7.7)), tumor-to-muscle ratio (TMR) (23.2(11.5, 38.0) vs 18.3(9.6, 26.6); t=9.36, z values: 4.44-7.40, all P<0.001). Conclusion:The image quality of TB PET/CT scan with 1 min acquisition can meet the diagnostic requirements, and is better than the C PET/CT image quality with conventional clinical acquisition.

This article reported a prenatally diagnosed case of complete ring chromosome 15. A 38-year-old woman who conceived by in vitro fertilization and frozen embryo transfer underwent amniocentesis for prenatal diagnosis at 18 +5 weeks of gestation due to advanced maternal age. The result of G-banding karyotyping was mos 46,XX,r(15)[88]/45,X,-15[11]/46,XX,r(15;15)[1]. No numerical abnormalities of chromosomes or definite pathogenic copy number variations (CNVs) were detected by chromosomal microarray analysis. Amniocentesis was performed again at 31 +6 weeks of gestation. The result of genome copy number variation sequencing indicated no pathogenic CNV and fluorescence in situ hybridization on cultured amniocytes revealed nuc ish(15q)×1[15]/(15q)×3[5]/(15q)×2[80]. Based on all the prenatal diagnosis results, it was suggested that the fetus carried a complete ring chromosome 15. As the peripheral blood chromosomes of the couple were normal and no obvious abnormalities were detected by the prenatal ultrasound either in our hospital or another hospital, the pregnant woman decided to continue the pregnancy after genetic counseling and delivered a baby girl at 41 weeks of gestation. The girl showed no physical abnormalities during a seven-month follow-up.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.

Objective:To investigate the clinical characteristics and prognosis of neonatal chylothorax.Methods:The clinical data of newborns diagnosed with chylothorax from June 2016 to June 2023 in Neonatal Center of Beijing Children's Hospital were retrospectively analyzed, and divided into congenital group and acquired group according to the pathogenesis of chylothorax. The clinical characteristics, treatment methods and prognosis of the two groups were compared.Results:A total of 23 cases were included, including 17 cases (73.9%) in the congenital group and 6 cases (26.1%) in the acquired group. There was no significant difference in gender, gestational age and birth weight between the two groups ( P>0.05). Compared with the acquired group, the proportion of lymphocytes (97.0% vs. 85.0%), the use of erythromycin (7/17 vs. 1/6) and octreotide (9/17 vs. 1/6) and special formula milk feeding (13/17 vs. 2/6) were higher in the congenital group; the proportion of right hydrothorax (1/17 vs. 3/6), invasive mechanical ventilation (6/17 vs. 6/6) and breastfeeding (0/17 vs. 3/6) were lower in the congenital group ( P<0.05). There were no significant differences in terms of the white blood cell count in pleural fluid and plasma protein content, incidence of bilateral and left pleural fluid, proportion of closed thoracic drainage, maximum daily drainage volume, drainage duration, total drainage volume, albumin utilization rate, length of stay and survival rate between the two groups ( P>0.05). 18 cases of pleural effusion absorption without recurrence after conservative treatment; 5 cases died, of which 4 cases died after their parents abandoned treatment, and 1 case died of neonatal necrotizing enterocolitis after thoracic duct ligation surgery. Conclusions:Congenital chylothorax and acquired chylothorax were similar in severity, course of disease and overall prognosis. The utilization rate of erythromycin and octreotide in congenital chylothorax was higher than that in acquired chylothorax. The neonatal chylothorax is usually with an overall good prognosis.

Objective: To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening (microstomia) due to systemic scleroderma. Methods: This study followed medical ethics, and informed consent has been obtained from patients. A case of Ken's Type I mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression. Individual trays were made based on the patient's left and right mandibular dentition, and segmented molds were obtained. Simultaneously, intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles. After each part of the model was obtained, the mandibular model was scanned and digitally aligned to form the final denture model, and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing (CAD/CAM) technology. At the same time, combined with the literature, the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed. Results: The denture was well retained and achieved a good repair effect. The patients expressed satisfaction with the mastication efficiency and other functions of the denture. The findings of the literature review show that the integration of digital technology with the traditional impression method, along with computer fitting, can accurately obtain the patient's oral model and facilitate successful follow-up repairs. However, when the anterior mandibular dentition of the patient is absent, the margin of error is increased in this procedure, which deserves further exploration. Conclusion Utilizing digital technology as the leading method, combined with the traditional impression method of segmental impression, for the repair of dental defects in patients with limited mouth opening, has proven to be effective. Thus, patients report a positive medical experience with high satisfaction, indicating that this approach is worthy of clinical promotion.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.