ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Immobilized enzyme-based enzyme electrode biosensors, characterized by high sensitivity and efficiency, strong specificity, and compact size, demonstrate broad application prospects in life science research, disease diagnosis and monitoring, etc. Immobilization of enzyme is a critical step in determining the performance (stability, sensitivity, and reproducibility) of the biosensors. Random immobilization (physical adsorption, covalent cross-linking, etc.) can easily bring about problems, such as decreased enzyme activity and relatively unstable immobilization. Whereas, directional immobilization utilizing amino acid residue mutation, affinity peptide fusion, or nucleotide-specific binding to restrict the orientation of the enzymes provides new possibilities to solve the problems caused by random immobilization. In this paper, the principles, advantages and disadvantages and the application progress of enzyme electrode biosensors of different directional immobilization strategies for enzyme molecular sensing elements by specific amino acids (lysine, histidine, cysteine, unnatural amino acid) with functional groups introduced based on site-specific mutation, affinity peptides (gold binding peptides, carbon binding peptides, carbohydrate binding domains) fused through genetic engineering, and specific binding between nucleotides and target enzymes (proteins) were reviewed, and the application fields, advantages and limitations of various immobilized enzyme interface characterization techniques were discussed, hoping to provide theoretical and technical guidance for the creation of high-performance enzyme sensing elements and the manufacture of enzyme electrode sensors.

BACKGROUND:We have successfully established an animal model of small ear pig in southern Yunnan province with internal tension relieving technique combined with autologous Achilles tendon for anterior cruciate ligament reconstruction,and verified the stability and reliability of the model.However,whether internal tension relieving technique can promote the ligamentalization process of autologous Achilles tendon graft has not been studied. OBJECTIVE:To investigate the differences in the process of ligamentalization between conventional reconstruction and internal reduction reconstruction of the anterior cruciate ligament by gross view,histology and electron microscopy. METHODS:Thirty adult female small ear pigs in southern Yunnan province were selected.Anterior cruciate ligament reconstruction was performed on the left knee joint with the ipsilateral knee Achilles tendon(n=30 in the normal group),and anterior cruciate ligament reconstruction was performed on the right knee joint with the ipsilateral knee Achilles tendon combined with the internal relaxation and enhancement system(n=30 in the relaxation group).The autogenous right forelimb was used as the control group;the anterior cruciate ligament was exposed but not severed or surgically treated.At 12,24,and 48 weeks after surgery,10 animals were sacrificed,respectively.The left and right knee joint specimens were taken for gross morphological observation to evaluate the graft morphology.MAS score was used to evaluate the excellent and good rate of the ligament at each time point.Hematoxylin-eosin staining was used to evaluate the degree of ligament graft vascularization.Collagen fibers and nuclear morphology were observed,and nuclear morphology was scored.Ultrastructural remodeling was evaluated by scanning electron microscopy and transmission electron microscopy. RESULTS AND CONCLUSION:(1)The ligament healing shape of the relaxation group was better at various time points after surgery,and the excellent and good rate of MAS score was higher(P<0.05).Moreover,the relaxation group could obtain higher ligament vascularization score(P<0.05).(2)The arrangement of collagen bundles and fiber bundles in the two groups gradually tended to be orderly,and the transverse fiber connections between collagen gradually increased and thickened,suggesting that the strength and shape degree of the grafts were gradually improved,but the ligament remodeling in the relaxation group was always faster than that in the normal group at various time points after surgery.(3)The diameter,distribution density,and arrangement degree of collagen fibers in the relaxation group were better than those in the normal group at all time points,especially in the comparison of collagen fiber diameter between and within the relaxation group(P<0.05).

With Glycyrrhizae Radix et Rhizoma-Gypsum Fibrosum drug pair as the research object, supramolecular chemistry of traditional Chinese medicine(TCM) was used to study differences between the compatibility of herbal medicine Glycyrrhizae Radix et Rhizoma with mineral medicine Gypsum Fibrosum and its main component CaSO_4·2H_2O, so as to preliminarily discuss the scientific connotation of compatibility of Gypsum Fibrosum in clinical application. A Malvern particle sizer, a scanning electron microscope(SEM), and a conductivity meter were used to observe and determine the physical properties such as microscopic morphology, particle size, and conductivity of Gypsum Fibrosum, CaSO_4·2H_2O, and water decoctions of them with Glycyrrhizae Radix et Rhizoma. An inductively coupled plasma optical emission spectrometer(ICP-OES) was employed to detect the inorganic metal elements in Glycyrrhizae Radix et Rhizoma-Gypsum Fibrosum and Glycyrrhizae Radix et Rhizoma-CaSO_4·2H_2O. Isothermal titration calorimetry(ITC) was conducted to quantify the interactions of Gypsum Fibrosum and CaSO_4·2H_2O with Glycyrrhizae Radix et Rhizoma. A Fourier transform infrared spectrometer(FTIR) was used to analyze the characteristic absorption peak change of Glycyrrhizae Radix et Rhizoma-Gypsum Fibrosum and Glycyrrhizae Radix et Rhizoma-CaSO_4·2H_2O. X-ray diffraction(XRD) was performed to determine the crystal structure and phase composition of Glycyrrhizae Radix et Rhizoma-Gypsum Fibrosum and Glycyrrhizae Radix et Rhizoma-CaSO_4·2H_2O. Further, glycyrrhizic acid(GA) was substituted for Glycyrrhizae Radix et Rhizoma to co-decoct with Gypsum Fibrosum, CaSO_4·2H_2O, and freeze-dried powder of their respective water decoctions. The results of XRD were used for verification analysis. The results showed that although CaSO_4·2H_2O is the main component of Gypsum Fibrosum, there were significant differences between their decoctions and between the decoctions of them with Glycyrrhizae Radix et Rhizoma. Specifically,(1) Both CaSO_4·2H_2O and Gypsum Fibrosum were amorphous fibrous. However, the particle size and conductivity were significantly different between the decoctions of CaSO_4·2H_2O and Gypsum Fibrosum alone.(2) Under SEM, Glycyrrhizae Radix et Rhizoma-CaSO_4·2H_2O was a hybrid system with various morphologies, while Glycyrrhizae Radix et Rhizoma-Gypsum Fibrosum presented uniform nanoparticles.(3) The particle sizes and conductivities of Glycyrrhizae Radix et Rhizoma-CaSO_4·2H_2O and Glycyrrhizae Radix et Rhizoma-Gypsum Fibrosum were significantly different and did not follow the same tendency as those of the decoctions of CaSO_4·2H_2O and Gypsum Fibrosum alone.(4) Compared with Glycyrrhizae Radix et Rhizoma-CaSO_4·2H_2O, Glycyrrhizae Radix et Rhizoma-Gypsum Fibrosum had stronger molecular binding ability and functional group structure change.(5) The crystal form was largely different between the freeze-dried powder of CaSO_4·2H_2O decoction and Gypsum Fibrosum decoction, and their crystal forms were also significantly different from those of the freeze-dried powder of Glycyrrhizae Radix et Rhizoma-CaSO_4·2H_2O and Glycyrrhizae Radix et Rhizoma-Gypsum Fibrosum decoctions. The reason for the series of differences is that Gypsum Fibrosum is richer in trace elements than CaSO_4·2H_2O. The XRD results of GA-Gypsum Fibrosum and GA-CaSO_4·2H_2O decoctions further prove the importance of trace elements in Gypsum Fibrosum for supramolecule formation. This research preliminarily reveals the influence of compatibility of Gypsum Fibrosum or CaSO_4·2H_2O on decoction phase state, material form, and crystal form, providing a basis for the rational clinical application of Gypsum Fibrosum.
Drugs, Chinese Herbal/chemistry* ; Calcium Sulfate/chemistry* ; Glycyrrhiza/chemistry* ; Crystallization ; Particle Size ; Medicine, Chinese Traditional ; Rhizome/chemistry*

In this study, Saccharomyces cerevisiae R0 was used as the chassis cell to synthesize oleanolic acid from scratch through the heterologous expression of β-amyrin synthase(β-AS) from Glycyrrhiza uralensis, cytochrome P450 enzyme CYP716A154 from Catharanthus roseus, and cytochrome P450 reductase AtCPR from Arabidopsis thaliana. The engineered strain R1 achieved shake flask titres of 5.19 mg·L~(-1). By overexpressing enzymes in the pentose phosphate pathway(PPP)(ZWF1, GND1, TKL1, and TAL), the NADH kinase gene in the mitochondrial matrix(POS5), truncated 3-hydroxy-3-methylglutaryl-CoA reductase(tPgHMGR1) from Panax ginseng, and farnesyl diphosphate synthase gene(SmFPS) from Salvia miltiorrhiza, the precursor supply and intracellular reduced nicotinamide adenine dinucleotide phosphate(NADPH) supply were enhanced, resulting in an 11.4-fold increase in squalene yield and a 3.6-fold increase in oleanolic acid yield. Subsequently, increasing the copy number of the heterologous genes tPgHMGR1, β-AS, CYP716A154, and AtCPR promoted the metabolic flow towards the final product, oleanolic acid, and increased the yield by three times. Shake flask fermentation data showed that, by increasing the copy number, precursor supply, and intracellular NADPH supply, the final engineered strain R3 could achieve an oleanolic acid yield of 53.96 mg·L~(-1), which was 10 times higher than that of the control strain R1. This study not only laid the foundation for the green biosynthesis of oleanolic acid but also provided a reference for metabolic engineering research on other pentacyclic triterpenoids in S. cerevisiae.
Oleanolic Acid/biosynthesis* ; Saccharomyces cerevisiae/metabolism* ; Industrial Microbiology ; Microorganisms, Genetically-Modified/metabolism* ; Plants/enzymology* ; Fermentation ; Metabolic Engineering

OBJECTIVE: To explore the relationship between serum chloride levels and prognosis in patients with hepatic coma in the intensive care unit (ICU). METHODS: We analyzed 545 patients with hepatic coma in the ICU from the Medical Information Mart for Intensive Care IV (MIMIC-IV) database. Associations between serum chloride levels and 28-day and 1-year mortality rates were assessed using restricted cubic splines (RCSs), Kaplan-Meier (KM) curves, and Cox regression. Subgroup analyses, external validation, and mechanistic studies were also performed. RESULTS: A total of 545 patients were included in the study. RCS analysis revealed a U-shaped association between serum chloride levels and mortality in patients with hepatic coma. The KM curves indicated lower survival rates among patients with low chloride levels (< 103 mmol/L). Low chloride levels were independently linked to increased 28-day and 1-year all-cause mortality rates. In the multivariate models, the hazard ratio ( HR) for 28-day mortality in the low-chloride group was 1.424 (95% confidence interval [ CI]: 1.041-1.949), while the adjusted hazard ratio for 1-year mortality was 1.313 (95% CI: 1.026-1.679). Subgroup analyses and external validation supported these findings. Cytological experiments suggested that low chloride levels may activate the phosphorylation of the NF-κB signaling pathway, promote the expression of pro-inflammatory cytokines, and reduce neuronal cell viability. CONCLUSION Low serum chloride levels are independently associated with increased mortality in patients with hepatic coma.
Humans ; Male ; Female ; Middle Aged ; Intensive Care Units ; Prognosis ; Chlorides/blood* ; Aged ; Coma/blood* ; Adult

Body weight abnormalities, including overweight, obesity, and underweight, have become a dual public health challenge in Chinese adults: overweight and obesity lead to a variety of chronic complications, while underweight increases the risks of malnutrition, sarcopenia, and organ dysfunction. To systematically address these issues, multidisciplinary experts in endocrinology, sports science, nutrition, and psychiatry from various regions have held multiple weight management seminars. Based on the latest epidemiological data and clinical evidence, they expanded the guideline to include assessment and intervention strategies for underweight, in addition to the core content of obesity management. This guideline outlines the etiological mechanisms, evaluation methods, and multidimensional management strategies for overweight and obesity, covering key areas such as diagnosis and assessment, medical nutrition therapy, exercise prescription, pharmacological intervention, and psychological support. It is intended to provide a scientific and standardized approach to weight management across the adult population, aiming to curb the rising prevalence of obesity, mitigate complications associated with abnormal body weight, and improve nutritional status and overall quality of life.

The traditional Chinese medicine(TCM) industry is a crucial part of China's pharmaceutical sector and plays a strategic role in ensuring public health and promoting economic and social development. In response to the practical demand for high-quality development of the TCM industry, this paper focused on the bottlenecks encountered during the digital and intelligent transformation of TCM production systems. Specifically, it explored technical strategies and methodologies for constructing the best TCM production mode. An innovative artificial intelligence(AI)-centered technical architecture for TCM production was proposed, focusing on key aspects of production management including process modeling, state evaluation, and decision optimization. Furthermore, a series of critical technologies were developed to realize the best TCM production mode. Finally, a novel AI-driven TCM production mode characterized by a closed-loop system of "measurement-modeling-decision-execution" was presented through engineering case studies. This study is expected to provide a technological pathway for developing new quality productive forces within the TCM industry.
Artificial Intelligence ; Drugs, Chinese Herbal ; Medicine, Chinese Traditional/methods* ; Humans

OBJECTIVE: To investigate the characteristics of Vitamin D (VitD) and bone metabolism in patients with knee osteoarthritis (KOA) concurrent with osteoporosis (OP). METHODS: A retrospective analysis was performed on 240 patients who were admitted to the orthopedics department between March 2019 and March 2024. Patients were stratified into four distinct groups according to their respective disease categories.There were 90 patients in the simple KOA group, comprising 13 males and 77 females, age ranged from 50 to 91 years old with an average of (68.48±8.96) years old. There were 90 patients in the simple OP group, comprising 7 males and 83 females, age ranged from 52 to 88 years old with an average of (69.60±8.94 )years old. There were 30 patients in the KOA with OP group, comprising 1 male and 29 females, age ranged from 51 to 91 years old with an average of(69.03±7.93) years old. There were 30 patients in the physical examination group, comprising 5 males and 25 females, age ranged from 53 to 79 years old with an average of(64.93±6.51) years old. The general data and the levels of osteocalcin (OC), β-CrossLaps, parathyroid hormone(PTH) and VitD in each group were observed. RESULTS: The level of VitD in KOA with OP group (19.62±10.38) ng·ml^-1 and OP group (20.65±10.50) ng·ml^-1 was lower than that in physical examination group (27.46±8.00) ng·ml^-1 and KOA group (24.01±9.11) ng·ml^-1 (P<0.05). There were significant differences in β- CrossLaps and PTH levels among the four groups (P<0.001, P=0.019, respectively), while there was no significant difference in OC levels (P=0.763). Compared with the two simple disease groups, the KOA with OP group had higher levels of β - CrossLaps(0.81±0.30) ng·ml^-1 (P<0.001). There were significant differences in β-CrossLaps and PTH between the simple KOA group(0.54±0.22) ng·ml^-1, (46.03±18.08) pg·ml^-1 and the physical examination group (0.44±0.19) ng·ml^-1, (36.65±9.63) pg·mL^-1(P=0.038;P=0.006). There was a significant difference in PTH between the OP group(43.85±14.30) ng·ml-1, and the physical examination group, P=0.004. There was a significant difference in Kallgren-Lawrence grading between KOA with OP group and KOA group (P=0.006). Within KOA with OP group, the differences of β-CrossLaps and VitD levels among different K-L grades were statistically significant (P=0.016). The level of OC, β-CrossLaps and PTH within KOA with OP group was significantly different at different VitD levels (P=0.013, P=0.033, P=0.046). CONCLUSION Patients with KOA complicated by OP exhibit greater disturbances in bone metabolism and reduced VitD levels, particularly reflected by elevated β-CrossLaps. These findings underscore the importance of early monitoring of bone turnover and VitD supplementation in advanced-stage KOA with bone loss.
Humans ; Female ; Male ; Middle Aged ; Aged ; Vitamin D/blood* ; Osteoporosis/complications* ; Aged, 80 and over ; Osteoarthritis, Knee/complications* ; Retrospective Studies ; Bone and Bones/metabolism* ; Parathyroid Hormone/metabolism* ; Osteocalcin/metabolism*

OBJECTIVE: To explore the current research status and hotspots in the field of biomechanics of diabetic foot by bibliometric analysis methods. METHODS: Literatures related to biomechanics of diabetic foot published in the Web of Scienc Core Collection (WoSCC) from 1981 to 2024 were searched. CiteSpace software and R language bibliometrics plugin were used to conduct a visual analysis of annual publication volume of the literature, including publication volume of each country and region, the publication situation of authors and institutions, the citation situation of individual literature, and the co-occurrence network of keywords. RESULTS: Totally 996 literatures were included, and the number of published papers increased steadily. The United States (261 papers) and China (89 papers) were the top two countries in terms of the number of published papers. The mediating centrality of the United States was 0.94, and that of China was 0.01. Scholars such as Cavanagh and institutions like the Cleveland Clinic were at the core of research in this field. High-frequency keywords include plantar pressure (plantar pressure), diabetic foot (diabetic foot), ulceration (ulcer), etc. The research focuses on plantar pressure, ulcer formation and prevention, etc. CONCLUSION Biomechanical research on diabetic foot mainly focuses on the pressure distribution on the sole of the foot, callus formation, mechanical analysis of soft tissues on the sole of the foot, and the study of plantar decompression caused by Achilles tendon elongation. The research trend has gradually shifted from focusing on joint range of motion to gait and the design of braces and assistive devices, and has begun to pay attention to muscle strength, gait imbalance and proprioception abnormalities.
Humans ; Diabetic Foot/physiopathology* ; Biomechanical Phenomena ; Bibliometrics