ObjectiveTo study the pharmacological substances and mechanisms through which sesquiterpene ZH-13 from Aquilariae Lignum Resinatum improves neuroinflammation. MethodsBV-2 microglial cells were stimulated with lipopolysaccharide （LPS） to induce neuroinflammation. The cells were divided into the normal group， the model group， and the ZH-13 low- and high-dose treatment groups （10， 20 μmol·L^-1）. The model group was treated with 1 μmol·L^-1 LPS. Cell viability was assessed using the cell proliferation and activity assay （CCK-8 kit）. Nitric oxide （NO） release in the cell supernatant was measured using a nitric oxide kit （Griess method）. The mRNA expression levels of interleukin-1β （IL-1β）， tumor necrosis factor-α （TNF-α）， inducible nitric oxide synthase （iNOS）， and interleukin-6 （IL-6） were detected by real-time fluorescence quantitative polymerase chain reaction （Real-time PCR）. The phosphorylation of mitogen-activated protein kinase （MAPK） pathway proteins was assessed by Western blot. ResultsCompared with the model group， ZH-13 dose-dependently reduced NO release from BV-2 cells under LPS stimulation （P<0.05， P<0.01）. In the 20 μmol·L^-1 ZH-13 treatment group， the mRNA expression levels of IL-1β， TNF-α， iNOS， and IL-6 were significantly reduced compared to the model group （P<0.05， P<0.01）. In both the low- and high-dose ZH-13 groups， the expression of the inflammatory factor TNF-α and the phosphorylation of c-Jun N-terminal kinase （JNK） in the upstream MAPK pathway were significantly reduced （P<0.05）. After stimulation with the JNK agonist anisomycin （Ani）， both low- and high-dose ZH-13 treatment groups showed reduced phosphorylation of JNK proteins compared to the Ani-treated group （P<0.01）. ConclusionThe sesquiterpene compound ZH-13 from Aquilariae Lignum Resinatum significantly ameliorates LPS-induced neuroinflammatory responses in BV-2 cells by inhibiting excessive JNK phosphorylation and reducing TNF-α expression. These findings elucidate the pharmacological substances and mechanisms underlying the sedative and calming effects of Aquilariae Lignum Resinatum.

OBJECTIVES: To explore the application of the colloidal gold method and chemiluminescence method in detecting gonadotropin (Gn) in morning urine for assessing pubertal development status in children. METHODS: A total of 132 children diagnosed with central precocious puberty (CPP), early and fast puberty (EFP), and premature thelarche (PT) at Ruijin Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from November 2021 to December 2022 were included, along with 685 healthy children who underwent routine health examinations at the hospital's pediatric health care department during the same period. All 132 patients underwent a gonadotropin-releasing hormone (GnRH) stimulation test. Both patients and healthy children had their urinary Gn levels measured using the colloidal gold method and chemiluminescence method, including levels of luteinizing hormone (LH) and follicle-stimulating hormone (FSH). The correlation between serum Gn and urinary Gn detected by the two methods, as well as the correlation between Tanner stages of healthy children and urinary Gn, was analyzed. RESULTS: Urine Gn levels detected by both the colloidal gold method and chemiluminescence method showed a positive correlation with serum LH baseline values, LH peak values, baseline LH/FSH ratios, and peak LH/FSH ratios (P<0.05). In healthy children, urinary LH levels detected by the chemiluminescence method gradually increased from Tanner stage Ⅰ to Ⅳ (P<0.05), while urinary FSH levels were lower in Tanner stage I than in stages Ⅱ, Ⅲ, and IV (P<0.05). Urinary LH levels detected by the colloidal gold method were lower in Tanner stage I compared to stages Ⅱ, Ⅲ, and IV, with the highest levels observed in Tanner stage Ⅳ (P<0.05). Additionally, urinary FSH levels in Tanner stage Ⅲ were higher than in stages Ⅰ and Ⅱ (P<0.05). The area under the receiver operating characteristic curve for evaluating Tanner stages I and II in healthy children using urinary LH and FSH levels by the chemiluminescence method and urinary LH levels by the colloidal gold method were 0.730, 0.699, and 0.783, respectively. CONCLUSIONS The colloidal gold method and chemiluminescence method for detecting Gn in morning urine show good correlation with serum Gn levels. As a non-invasive and convenient detection method, the colloidal gold method can serve as a useful tool for screening the onset of pubertal development in children.
Humans ; Child ; Male ; Female ; Gold Colloid ; Luminescent Measurements/methods* ; Gonadotropins/urine* ; Puberty ; Luteinizing Hormone/urine* ; Child, Preschool ; Adolescent ; Follicle Stimulating Hormone/urine*

Instrument separation is a critical complication during root canal therapy, impacting treatment success and long-term tooth preservation. The etiology of instrument separation is multifactorial, involving the intricate anatomy of the root canal system, instrument-related factors, and instrumentation techniques. Instrument separation can hinder thorough cleaning, shaping, and obturation of the root canal, posing challenges to successful treatment outcomes. Although retrieval of separated instrument is often feasible, it carries risks including perforation, excessive removal of tooth structure and root fractures. Effective management of separated instruments requires a comprehensive understanding of the contributing factors, meticulous preoperative assessment, and precise evaluation of the retrieval difficulty. The application of appropriate retrieval techniques is essential to minimize complications and optimize clinical outcomes. The current manuscript provides a framework for understanding the causes, risk factors, and clinical management principles of instrument separation. By integrating effective strategies, endodontists can enhance decision-making, improve endodontic treatment success and ensure the preservation of natural dentition.
Humans ; Root Canal Therapy/adverse effects* ; Consensus ; Root Canal Preparation/adverse effects*

During cardiopulmonary resuscitation (CPR), the depth of compression is a critical factor affecting the effectiveness of the rescue and the patient's prognosis. However, it is difficult to master the correct compression depth in manual CPR. If the compression depth is too deep, it may cause rib fractures, while insufficient compression depth may fail to establish effective circulation. Although most existing manual CPR compression depth control devices can indicate the depth but lack direct limiting functions. Against this background, led by a team of faculty and students from the Department of Emergency and Rescue Medicine at Xuzhou Medical University, on the basis of the development of a portable CPR protection device (National Invention Patent of China, patent number: ZL 2021 1 0309001.4), the device's compression depth limiting performance was further expanded, and then a new type of CPR compression depth limiting device suitable for different body types was developed. This device has applied for a National Invention Patent of China (patent application number: ZL 2023 1 0644910.2) and has been granted a National Utility Model Patent of China (patent number: ZL 2023 2 1384853.0). The device consists of a horizontal support beam, a vertical sliding beam, a guide block, a rotating shaft, a rotating arm, a limit slider and a limit pin. The horizontal support beams of the two limit devices are fixed horizontally to the horizontal side beams of the portable CPR protection device by bolts, and the connecting arms at the bottom of the vertical sliding beams are fixedly connected with the pressing mechanism, so that precise control of the pressing depth in CPR operation can be realized according to the patient's body size by the mechanical linkage of the vertical sliding beams and the rotating arms, as well as by the blocking and limiting effect of the rotating arms and the guiding blocks on the limiting sliders. It can prevent the occurrence of complications such as chest wall fractures, and thereby increase the success rate of manual CPR, and its structure is simple, low-cost, and suitable for social popularization.
Cardiopulmonary Resuscitation/instrumentation* ; Humans ; Equipment Design ; Pressure

OBJECTIVE: This study aimed to explore the association between body mass index (BMI) and mortality based on the 10-year population-based multicenter prospective study. METHODS: A general population-based multicenter prospective study was conducted at four sites in rural China between 2013 and 2023. Multivariate Cox proportional hazards models and restricted cubic spline analyses were used to assess the association between BMI and mortality. Stratified analyses were performed based on the individual characteristics of the participants. RESULTS: Overall, 19,107 participants with a sum of 163,095 person-years were included and 1,910 participants died. The underweight (< 18.5 kg/m ²) presented an increase in all-cause mortality (adjusted hazards ratio [ aHR] = 2.00, 95% confidence interval [ CI]: 1.66-2.41), while overweight (≥ 24.0 to < 28.0 kg/m ²) and obesity (≥ 28.0 kg/m ²) presented a decrease with an aHR of 0.61 (95% CI: 0.52-0.73) and 0.51 (95% CI: 0.37-0.70), respectively. Overweight ( aHR = 0.76, 95% CI: 0.67-0.86) and mild obesity ( aHR = 0.72, 95% CI: 0.59-0.87) had a positive impact on mortality in people older than 60 years. All-cause mortality decreased rapidly until reaching a BMI of 25.7 kg/m ² ( aHR = 0.95, 95% CI: 0.92-0.98) and increased slightly above that value, indicating a U-shaped association. The beneficial impact of being overweight on mortality was robust in most subgroups and sensitivity analyses. CONCLUSION This study provides additional evidence that overweight and mild obesity may be inversely related to the risk of death in individuals older than 60 years. Therefore, it is essential to consider age differences when formulating health and weight management strategies.
Humans ; Body Mass Index ; China/epidemiology* ; Male ; Female ; Middle Aged ; Prospective Studies ; Rural Population/statistics & numerical data* ; Aged ; Follow-Up Studies ; Adult ; Mortality ; Cause of Death ; Obesity/mortality* ; Overweight/mortality*

Bone grafting is a primary method for treating bone defects. Among various graft materials, xenogeneic bone substitutes are widely used in clinical practice due to their abundant sources, convenient processing and storage, and avoidance of secondary surgeries. With the advancement of domestic production and the limitations of imported products, an increasing number of bone filling or grafting substitute materials isentering clinical trials. Relevant experts have drafted this consensus to enhance the management of medical device clinical trials, protect the rights of participants, and ensure the scientific and effective execution of trials. It summarizes clinical experience in aspects, such as design principles, participant inclusion/exclusion criteria, observation periods, efficacy evaluation metrics, safety assessment indicators, and quality control, to provide guidance for professionals in the field.
Humans ; Bone Substitutes/therapeutic use* ; Randomized Controlled Trials as Topic/methods* ; Consensus ; Bone Transplantation ; Research Design

Objective To analyze chemical constituents of compound Maxing Shigan decoction by ultra-high perfor-mance liquid chromatography-quadrupole time-of-flight mass spectrometry (UPLC-QTOF/MS). Methods The separation was performed on a UPLC BEH C₁₈ column (2.1 mm×100 mm, 2.5 µm)，with a gradient elution applying 0.1% aqueous formic acid solution and 0.1% formic acid acetonitrile as a mobile phase. The column temperature was 40 °C. The flow rate was 0.4 ml/min and the analysis time was 15 min. Mass spectrometry (MS) data were collected in both positive and negative ESI ion modes. Results Through UPLC-QTOF/MS analysis and reference validation, a total of 59 chemical components in Maxing Shigan decoction were identified. Conclusion An ultra-high performance liquid chromatography quadrupole time-of-flight mass spectrometry (UPLC-QTOF/MS) method was established to identify the chemical components of Maxing Shigan decoction. This method is simple, efficient, sensitive and accurate, and provides a basis for the elucidation of the pharmacodynamic material basis and mechanism of Maxing Shigan decoction. It can provide data reference for the optimization of the compatibility of traditional Chinese medicine in the treatment of COVID-19.

In recent years, the management of heart failure (HF) (including drug therapy and non-drug therapy) has made many advances, but its prevalence and mortality are still high, and the long-term prognosis is poor.It is urgent to develop new therapeutic approaches and intervention targets and explore new drugs and methods to improve the prognosis.The characteristic transformation of myocardial energy metabolism is an important marker of HF development, closely related to the mechanism of myocardial energy deficiency in the failing heart.The imbalance of glucose and fatty acid availability in cardiomyocytes, metabolic conversion from oxidative phosphorylation to glycolysis of myocardial mitochondria, uncoupling between glycolysis and glucose oxidation pathway, and fetal gene reexpression all play important roles in myocardial dysfunction and HF development.Potential therapeutic methods to reduce the severity of HF include optimizing myocardial energy substrate metabolism, enhancing mitochondrial oxidative metabolism capacity, improving myocardial mitochondrial productivity efficiency, and thereby increasing cardiac work.This paper summarizes the characteristics and molecular regulation mechanism of myocardial energy metabolism during HF and discusses the research direction of optimizing HF treatment strategy based on myocardial energy metabolism regulation.

Objective To investigate the detection rate,epidemiology and resistance mechanism of methicil-lin-resistant Staphylococcus aureus(MRSA)in a hospital in recent 5 years.Methods A total of 762 strains of non repetitive Staphylococcus aureus detected from 2016 to 2020 in a hospital were collected retrospectively.Methicillin-sensitive Staphylococcus aureus(MSSA)was 392 strains(MSSA group)and 370 strains caused by MRSA(MRSA group),and 95 strains of MRSA isolated in 2020 were further used for resistance mechanism.Staphylococcus aureus was identified and tested for drug sensitivity by Vitek 2 automatic microbial system.Molecular epidemiological typing was determined by multilocus sequence typing.The biofilm formation was performed by crystal violet staining.PCR amplification was used to detect drug resistance genes,virulence genes and biofilm related genes,and logistic regression analysis was used to investigate the independent risk factors of its occurrence.Results The detection rate of MRSA in past five years was 48.56％,mainly was from pus samples and secretion samples(38.38％,33.51％respectively).MRSA was found in the general sur-gery(18.65％)and otorhinolaryngology(12.70％).ST88 was the most common multilocus sequence typing(37.89％),and followed by ST951(24.21％).Moderate biofilm formation was the most common,accounting for 74.73％.Multivariate regression analysis showed that compared with MSSA group,hypoproteinemia,en-docrine system diseases,wound infection and history of antibiotic use within six months were the independent risk factors for infection in MRSA group.Compared with the control group,hospital transfer,wound infection and tumor were independent risk factors for infection in MRSA group(P＜0.05).Conclusion The detection rate of MRSA in a hospital is high,and the carrying rate of various drug-resistant genes is high.The hospital should pay attention to the prevalence of MRSA and related risk factors,so as to prevent it early.