ObjectiveTo clarify the expression of TRIM28 in non-M3 acute myeloid leukemia （AML） and its correlation with clinical indicators and prognosis， and to further explore the effect of TRIM28 expression levels on the proliferation and apoptosis of AML cells using small interfering RNA. MethodsThe GSE34577 dataset was analyzed using R software to compare TRIM28 expression between healthy controls and non-M3 acute myeloid leukemia （AML） patients. Clinical samples from non-M3 AML patients were collected， with TRIM28 expression levels measured using real-time quantitative PCR （qPCR）. The analysis focused on correlations between TRIM28 expression and various clinical indicators， treatment efficacy， and patient prognosis. Furthermore， small interfering RNA （siRNA） technology was employed to downregulate TRIM28 expression in human primary AML cells （HL60 cell line）. The effects on cell proliferation and apoptosis were then assessed through CCK-8 assays and flow cytometry， respectively. ResultsThe results showed that TRIM28 was up-regulated in non-M3 AML of both online database GSE34577 and clinical samples （P<0.000 1）， TRIM28 expression of new diagnosis group and relapsed refractory group was higher than iron deficiency anemia group （P<0.01）， and there was no significance between different French-American-British classification systems subtype. TRIM28 expression was higher in non-M3 AML patients with a poor genetic prognosis stratified as moderate than in the good prognosis group， and TRIM28 expression was associated with NPM1 combined with the FLT3-ITD mutation， positively correlated with age， bone marrow blast， peripheral blood blast and white blood cell， negatively correlated with hemoglobin. In addition， interference TRIM28 greatly inhibited cell proliferation and promoted cell apoptosis. ConclusionThis study reveals that TRIM28 is highly expressed in non-M3 AML and associated with prognosis， and plays a key role in the proliferation and apoptosis of AML cells， suggesting that TRIM28 may serve as a novel therapeutic target for non-M3 AML.

ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

With the rapid development of the biopharmaceutical field, the efficient and simultaneous extraction of multiple biological components from biological samples has become a critical process for advancing scientific research. The ability to simultaneously extract various molecular components such as metabolites, DNA, RNA, and proteins is pivotal for multi-omics studies, which aim to comprehensively understand the molecular mechanisms of biological systems. Traditional methods often extract these components separately, leading to challenges such as sample loss, time consumption, contamination, and inconsistencies across different data types. In contrast, simultaneous extraction techniques address these issues by maintaining the consistency of each biological component’s physiological state, improving data reliability and facilitating integration across omic platforms. This review systematically summarizes recent advances in simultaneous extraction technologies, focusing on methods such as methanol/chloroform extraction, TRIzol reagent extraction, and modified Folch extraction, which have shown significant promise in improving the efficiency and integrity of biological sample preparation. These methods offer various advantages, such as reduced sample volume requirements, decreased contamination risk, and enhanced extraction consistency, which are crucial for studies involving small sample sizes or precious clinical specimens. Among these, methanol/chloroform extraction stands out for its simplicity, low cost, and ability to extract a wide range of biological molecules. However, it does face limitations, such as its inefficiency in extracting lipids and potential RNA contamination. On the other hand, the TRIzol reagent method has become a widely adopted technique due to its ability to simultaneously isolate RNA, proteins, and metabolites from the same sample. Despite its effectiveness, the TRIzol method has limitations in RNA quality, especially when handling complex samples or those with high protein content. Modified Folch extraction, which combines liquid-liquid extraction with commercial kits, offers a highly efficient way to extract polar metabolites, lipids, RNA, DNA, and proteins from small tissue samples. This method has proven advantageous in terms of extraction yield, especially for challenging or rare samples, although it requires precise handling to avoid cross-contamination between phases. The integration of automated platforms, microfluidics, and high-throughput systems is another exciting avenue for improving simultaneous extraction. Automation facilitates large-scale, reproducible sample processing with minimal human error, while microfluidics provides high precision in sample handling and enables real-time monitoring of extraction efficiency. These innovations not only enhance the speed and reproducibility of sample preparation but also open new possibilities for single-cell analysis, where sample volumes are often limited, and extraction efficiency is critical. In addition to the technical aspects, the review also highlights the importance of optimizing extraction protocols for specific sample types, such as clinical tissues, plants, and microorganisms. For example, the challenge of extracting multiple components from cancer tissues, where sample degradation and contamination risks are high, can be mitigated by carefully selecting extraction reagents and minimizing sample handling steps. Similarly, in plant studies, where metabolite diversity is vast, the simultaneous extraction methods must be optimized to account for the unique composition of plant tissues, which often include complex secondary metabolites and cell wall components. Looking forward, the development of more efficient and standardized simultaneous extraction methods will be crucial for advancing multi-omics research. There is a growing need for protocols that can be tailored to specific research needs, ensuring both reproducibility and flexibility in diverse applications. Additionally, combining these extraction methods with high-resolution analytical techniques such as mass spectrometry and next-generation sequencing will further enhance the potential of multi-omics studies to provide comprehensive insights into biological systems. As these technologies continue to evolve, their application in personalized medicine, environmental research, and agriculture holds great promise for addressing critical scientific challenges. In conclusion, while simultaneous extraction technologies have made significant strides, several challenges remain in optimizing extraction efficiency, ensuring reproducibility, and reducing costs. Future research should focus on refining extraction protocols, developing innovative extraction reagents, and expanding the scope of these methods to cater to a broader range of biological samples. Ultimately, the continued integration of these advanced techniques will revolutionize the way biological samples are prepared, analyzed, and understood in the context of multi-omics research.

With the rapid development of the biopharmaceutical field, the efficient and simultaneous extraction of multiple biological components from biological samples has become a critical process for advancing scientific research. The ability to simultaneously extract various molecular components such as metabolites, DNA, RNA, and proteins is pivotal for multi-omics studies, which aim to comprehensively understand the molecular mechanisms of biological systems. Traditional methods often extract these components separately, leading to challenges such as sample loss, time consumption, contamination, and inconsistencies across different data types. In contrast, simultaneous extraction techniques address these issues by maintaining the consistency of each biological component’s physiological state, improving data reliability and facilitating integration across omic platforms. This review systematically summarizes recent advances in simultaneous extraction technologies, focusing on methods such as methanol/chloroform extraction, TRIzol reagent extraction, and modified Folch extraction, which have shown significant promise in improving the efficiency and integrity of biological sample preparation. These methods offer various advantages, such as reduced sample volume requirements, decreased contamination risk, and enhanced extraction consistency, which are crucial for studies involving small sample sizes or precious clinical specimens. Among these, methanol/chloroform extraction stands out for its simplicity, low cost, and ability to extract a wide range of biological molecules. However, it does face limitations, such as its inefficiency in extracting lipids and potential RNA contamination. On the other hand, the TRIzol reagent method has become a widely adopted technique due to its ability to simultaneously isolate RNA, proteins, and metabolites from the same sample. Despite its effectiveness, the TRIzol method has limitations in RNA quality, especially when handling complex samples or those with high protein content. Modified Folch extraction, which combines liquid-liquid extraction with commercial kits, offers a highly efficient way to extract polar metabolites, lipids, RNA, DNA, and proteins from small tissue samples. This method has proven advantageous in terms of extraction yield, especially for challenging or rare samples, although it requires precise handling to avoid cross-contamination between phases. The integration of automated platforms, microfluidics, and high-throughput systems is another exciting avenue for improving simultaneous extraction. Automation facilitates large-scale, reproducible sample processing with minimal human error, while microfluidics provides high precision in sample handling and enables real-time monitoring of extraction efficiency. These innovations not only enhance the speed and reproducibility of sample preparation but also open new possibilities for single-cell analysis, where sample volumes are often limited, and extraction efficiency is critical. In addition to the technical aspects, the review also highlights the importance of optimizing extraction protocols for specific sample types, such as clinical tissues, plants, and microorganisms. For example, the challenge of extracting multiple components from cancer tissues, where sample degradation and contamination risks are high, can be mitigated by carefully selecting extraction reagents and minimizing sample handling steps. Similarly, in plant studies, where metabolite diversity is vast, the simultaneous extraction methods must be optimized to account for the unique composition of plant tissues, which often include complex secondary metabolites and cell wall components. Looking forward, the development of more efficient and standardized simultaneous extraction methods will be crucial for advancing multi-omics research. There is a growing need for protocols that can be tailored to specific research needs, ensuring both reproducibility and flexibility in diverse applications. Additionally, combining these extraction methods with high-resolution analytical techniques such as mass spectrometry and next-generation sequencing will further enhance the potential of multi-omics studies to provide comprehensive insights into biological systems. As these technologies continue to evolve, their application in personalized medicine, environmental research, and agriculture holds great promise for addressing critical scientific challenges. In conclusion, while simultaneous extraction technologies have made significant strides, several challenges remain in optimizing extraction efficiency, ensuring reproducibility, and reducing costs. Future research should focus on refining extraction protocols, developing innovative extraction reagents, and expanding the scope of these methods to cater to a broader range of biological samples. Ultimately, the continued integration of these advanced techniques will revolutionize the way biological samples are prepared, analyzed, and understood in the context of multi-omics research.

Background: High-mobility group box protein 1 (HMGB1) is a chromatin-binding protein involved in arthritis, ischemia, sepsis, atherosclerosis, neurodegenerative disorders, meningitis, and cancer. HMGB1 exhibits dual roles in cancer, acting as either a tumor suppressor or oncoprotein depending on context. Objective: This research aimed to elucidate HMGB1’s functional significance in cutaneous squamous cell carcinoma (cSCC). Methods: We overexpressed HMGB1 in cSCC cell lines using recombinant adenovirus and examined its effects on cell proliferation, colony formation, and cell migration. Results: Immunohistochemical analysis revealed elevated HMGB1 expression levels in cSCC tissue relative to normal epidermis. To assess the influence of HMGB1, we employed recombinant adenoviruses expressing HMGB1 to transduce SCC cell lines (SCC12 and SCC13). Enhanced HMGB1 expression significantly promoted cellular proliferation and colony formation capacity.Notably, HMGB1 overexpression elevated the levels of proliferation regulators, including P63, SOX2, CDK4 and CDK6. Furthermore, HMGB1 overexpression substantially enhanced tumor invasiveness, accompanied by upregulation of epithelial-mesenchymal transition (EMT) biomarkers. Mechanistically, overexpression of HMGB1 enhanced transforming growth factor-β signaling by increasing phosphorylation of SMAD2/3, the key mediators of EMT. Conclusion These data imply that HMGB1 acts as a tumor-promoting factor in cSCC.

Objective This study reports on the obligatory parasitism of water mites Arrenurus sp. on Anopheles messeae at the Manzhouli Port, Inner Mongolia, China. Methods Duing July 2024, a survey on the mosquito diversity was conducted at the Manzhouli Port. Captured mosquitoes and their ectoparasites were identified to species level. Results A total of 1840 adult mosquitoes were collected, representing species from three genera: Culex(Cx. modestus, Cx. pipiens pallens), Aedes(Ae. dorsalis, Ae. flavidorsalis, Ae. flavescens), and Anopheles (An. messeae). Among all the mosqutioes specimens,3 out of 150 captured An. messeae were found to carry ectoparasitic mites, with number of 2,4,27 mites separately. Morphological and molecular identification reached the same result as water mites(Hydrachnidiae, Hydracrina). COI gene sequence showed 94% similarity with the closest species Arrenurus truncatellus. Conlusions Literature review suggests water mites are host-specific parasitism of mosquito species and herein with the first record of Arrenurus sp. parasiting on An. Messeae in the most high-latitude region globally.

Objective: To present the plotting of trend analysis charts and the application of multi-rule trend analysis method for monitoring the quality of whole blood, washed red blood cells, and leukocyte-depleted suspended red blood cells. Methods: Samples of whole blood, washed red blood cells, and leukocyte-depleted suspended red blood cells were collected in accordance with relevant protocols and requirements. The results of blood quality testing were compiled. The trend line charts were plotted for the deviation rates of volume, hemoglobin (Hb) content, supernatant protein content, and leukocyte residual count. In addition, the trend line chart were plotted for hematocrit and post-storage hemolysis rate. Results: The trend analysis rules for the deviation rate of volume from the standard were: 1 categorized as out-of-control, (3 of 4) as warning, R as warning, 8 as alert, and 12 as alert. For Hb content deviation rate, the rules were: <0% categorized as out-of-control; <20% but ≥0% (for whole blood) or <10% but ≥0% (for washed red blood cells and leukocyte-depleted suspended red blood cells) as a warning. For supernatant protein content deviation rate, the rules were: ≥0.0% as out-of-control, and >-10% but <0.0% as a warning. For hematocrit, the rules were: 1 as out-of-control and (3 of 4) as warning. For leukocyte residual count deviation rate, the rules were: >0.0% as out-of-control, and >-10% but ≤0.0% as a warning. For post-storage hemolysis rate, the rule was: ≥0.8% out-of-control. Conclusion: The application of multi-rule trend analysis facilitates the timely identification of trend abnormalities and factors causing deviations in the collection and preparation processes of whole blood, washed red blood cells, and leukocyte-depleted suspended red blood cells, thereby providing reliable numerical evidence for their correction and adjustment.

Background Per- and polyfluoroalkyl substances (PFAS) are synthetic chemicals characterized by environmental persistence and have been ubiquitously detected in pregnant women. Although existing evidence suggests that PFAS may exert endocrine-disrupting effects, evidence remains limited regarding the associations of individual legacy and emerging PFAS congeners, as well as PFAS mixtures, with fetal hormonal homeostasis. Objective Based on the Jiashan Birth Cohort in China, to investigate the associations between maternal plasma concentrations of legacy and emerging PFAS in the second trimester and levels of multiple hormones in fetal cord blood. Methods A total of 336 women in the second trimester from the Jiashan Birth Cohort were enrolled. Concentrations of 53 legacy and emerging PFAS were measured in maternal plasma, and levels of eight key hormones were determined in fetal cord blood. Multiple linear regression, restricted cubic spline, and Bayesian kernel machine regression models were used to examine the linear, nonlinear, and joint associations of individual PFAS and PFAS mixtures with fetal cord blood hormone levels. Results Maternal plasma concentrations of perfluorononanoic acid, perfluorohexane sulfonic acid, perfluorooctanesulfonic acid, and 8:2 chlorinated perfluoroether sulfonic acid were positively associated with cord blood levels of insulin-like growth factor 1 (IGF1), with β values of 0.040, 0.050, 0.040, and 0.030, respectively (all P<0.05). In contrast, perfluoroheptanoic acid was negatively associated with prolactin levels (β=−0.060, P<0.01). Restricted cubic spline models revealed a nonlinear dose–response relationship between perfluorobutane sulfonic acid and growth hormone (likelihood ratio test P=0.045), with a positive association in the intermediate concentration interval (β=0.261, P=0.010) that turned negative at higher concentrations (β=−0.425, P=0.048), as well as a nonlinear trend between 6:2 fluorotelomer sulfonic acid and prolactin (likelihood ratio test P=0.074). Bayesian kernel machine regression analysis indicated a negative trend between PFAS mixture exposure and cord blood prolactin levels. Conclusion Maternal PFAS exposure in the second trimester is associated with higher insulin-like growth factor 1 levels and lower prolactin levels in fetal cord blood. Prolactin appears to be consistently associated with both individual PFAS congeners and PFAS mixtures. These findings suggest that maternal PFAS exposure may affect fetal endocrine homeostasis by disrupting the hypothalamic-pituitary-prolactin regulatory axis.

ObjectiveThe controllability changes of structural brain network were explored based on the control and brain network theory in young smokers, this may reveal that the controllability indicators can serve as a powerful factor to predict the sleep status in young smokers. MethodsFifty young smokers and 51 healthy controls from Inner Mongolia University of Science and Technology were enrolled. Diffusion tensor imaging (DTI) was used to construct structural brain network based on fractional anisotropy (FA) weight matrix. According to the control and brain network theory, the average controllability and the modal controllability were calculated. Two-sample t-test was used to compare the differences between the groups and Pearson correlation analysis to examine the correlation between significant average controllability and modal controllability with Fagerström Test of Nicotine Dependence (FTND) in young smokers. The nodes with the controllability score in the top 10% were selected as the super-controllers. Finally, we used BP neural network to predict the Pittsburgh Sleep Quality Index (PSQI) in young smokers. ResultsThe average controllability of dorsolateral superior frontal gyrus, supplementary motor area, lenticular nucleus putamen, and lenticular nucleus pallidum, and the modal controllability of orbital inferior frontal gyrus, supplementary motor area, gyrus rectus, and posterior cingulate gyrus in the young smokers’ group, were all significantly different from those of the healthy controls group (P<0.05). The average controllability of the right supplementary motor area (SMA.R) in the young smokers group was positively correlated with FTND (r=0.393 0, P=0.004 8), while modal controllability was negatively correlated with FTND (r=-0.330 1, P=0.019 2). ConclusionThe controllability of structural brain network in young smokers is abnormal. which may serve as an indicator to predict sleep condition. It may provide the imaging evidence for evaluating the cognitive function impairment in young smokers.

Immobilized enzyme-based enzyme electrode biosensors, characterized by high sensitivity and efficiency, strong specificity, and compact size, demonstrate broad application prospects in life science research, disease diagnosis and monitoring, etc. Immobilization of enzyme is a critical step in determining the performance (stability, sensitivity, and reproducibility) of the biosensors. Random immobilization (physical adsorption, covalent cross-linking, etc.) can easily bring about problems, such as decreased enzyme activity and relatively unstable immobilization. Whereas, directional immobilization utilizing amino acid residue mutation, affinity peptide fusion, or nucleotide-specific binding to restrict the orientation of the enzymes provides new possibilities to solve the problems caused by random immobilization. In this paper, the principles, advantages and disadvantages and the application progress of enzyme electrode biosensors of different directional immobilization strategies for enzyme molecular sensing elements by specific amino acids (lysine, histidine, cysteine, unnatural amino acid) with functional groups introduced based on site-specific mutation, affinity peptides (gold binding peptides, carbon binding peptides, carbohydrate binding domains) fused through genetic engineering, and specific binding between nucleotides and target enzymes (proteins) were reviewed, and the application fields, advantages and limitations of various immobilized enzyme interface characterization techniques were discussed, hoping to provide theoretical and technical guidance for the creation of high-performance enzyme sensing elements and the manufacture of enzyme electrode sensors.