AIM To explore the clinical effects of Jinfukang Oral Liquid combined with thymosin α1 on patients with non-small cell lung cancer due to Dual Deficiency of Qi and Yin.METHODS Seventy-five patients were randomly assigned into thymosin α1 group(15 cases)for 4-week administration,Jinfukang Oral Liquid group(30 cases)for 4-week administration,and combination group(30 cases)for 4-week administration.The changes in TCM clinical syndrome effects,immunity indices(CD3+T,Th,CTL,total NK,CD56dim CD16+NK,NKT,Treg,MDSC),lethality/inhibition ratios(CTL/Treg,total NK/Treg,NKT/Treg,CTL/MDSC,total NK/MDSC,NKT/MDSC)and FACT-L scores were detected.RESULTS The Jinfukang Oral Liquid group and combination group demonstrated higher total effective rates than the thymosin α1 group(P＜0.05).After the treatment,the Jinfukang Oral Liquid group and combination group displayed increased NKT(P＜0.05)and decreased MDSC(P＜0.05),which were more obvious than those in the thymosin α1 group(P＜0.05),and higher NKT was observable in the Jinfukang Oral Liquid group(P＜0.05);the Jinfukang Oral Liquid group and combination group displayed increased lethality/inhibition ratios(P＜0.05),among which NKT/Treg,CTL/MDSC,total NK/MDSC,NKT/MDSC were higher than those in the thymosin α1 group(P＜0.05),and higher CTL/MDSC,NKT/MDSC were observable in the Jinfukang Oral Liquid group(P＜0.05);the Jinfukang Oral Liquid group(except for physiological status,society and family status)and combination group(except for society and family status)displayed increased FACT-L scores(P＜0.05).CONCLUSION For the patients with non-small cell lung cancer due to Dual Deficiency of Qi and Yin,Jinfukang Oral Liquid single use or combined with thymosin α1 can enhance peripheral blood immune surveillance,inhibit immune escape,restore the balanced state of tumor immune responses,and improve TCM syndromes and life quality.

Objective To construct a finite element analysis model for the treatment of calcaneal fracture for Sanders Ⅲ type calcaneal by using simulated sustentaculum tali sustentacular screw placement,and to explore the effectiveness of the treatment of Sanders typeⅢcalcaneal fracture.Methods The finite element analysis method was used to study the effectiveness of the treatment of Sanders Ⅲ calcaneal fracture.Three calcaneal specimens of a healthy adult were taken for Micro-CT scanning to obtain the CT sections data,then Mimics 21.0 and Geomagic Wrap 2017 software were used to reconstruct the three-dimensional model of normal calcaneal bone,and SolidWorks 2017 software was used to map the internal fixation and fracture model according to the clinical fracture cases,and simulated surgery was performed.The data obtained were imported into ANSYS 17.0 finite element analysis software for material assignment and mesh division to establish a three-dimensional finite element model.The load and boundary constraints were applied to each model to perform finite element analysis and calculation,and then the stress of the finite element model and the maximum displacement of the fracture end were extracted.Results The maximum stress of the overall structure of each model was concentrated on internal fixation,in which the maximum stress of sustentaculum tali fracture and the maximum stress of screws in all fracture models are located on the sustentaculum tali sustentacular screw.The displacement of fracture end in each finite element model was less than 0.15 mm,and no internal fixation failure occurred.Conclusion It is effective to simulate the treatment of calcaneal fracture of Sanders type Ⅲ by using of sustentaculum tali sustentacular screw.

Metabolomics covers a wide range of applications in life sciences, biomedicine, and phytology. Data acquisition (to achieve high coverage and efficiency) and analysis (to pursue good classification) are two key segments involved in metabolomics workflows. Various chemometric approaches utilizing either pattern recognition or machine learning have been employed to separate different groups. However, insufficient feature extraction, inappropriate feature selection, overfitting, or underfitting lead to an insufficient capacity to discriminate plants that are often easily confused. Using two ginseng varieties, namely Panax japonicus (PJ) and Panax japonicus var. major (PJvm), containing the similar ginsenosides, we integrated pseudo-targeted metabolomics and deep neural network (DNN) modeling to achieve accurate species differentiation. A pseudo-targeted metabolomics approach was optimized through data acquisition mode, ion pairs generation, comparison between multiple reaction monitoring (MRM) and scheduled MRM (sMRM), and chromatographic elution gradient. In total, 1980 ion pairs were monitored within 23 min, allowing for the most comprehensive ginseng metabolome analysis. The established DNN model demonstrated excellent classification performance (in terms of accuracy, precision, recall, F1 score, area under the curve, and receiver operating characteristic (ROC)) using the entire metabolome data and feature-selection dataset, exhibiting superior advantages over random forest (RF), support vector machine (SVM), extreme gradient boosting (XGBoost), and multilayer perceptron (MLP). Moreover, DNNs were advantageous for automated feature learning, nonlinear modeling, adaptability, and generalization. This study confirmed practicality of the established strategy for efficient metabolomics data analysis and reliable classification performance even when using small-volume samples. This established approach holds promise for plant metabolomics and is not limited to ginseng.

Osteoporosis is a prevalent skeletal condition characterized by reduced bone mass and strength, leading to increased fragility. Buqi-Tongluo (BQTL) decoction, a traditional Chinese medicine (TCM) prescription, has yet to be fully evaluated for its potential in treating bone diseases such as osteoporosis. To investigate the mechanism by which BQTL decoction inhibits osteoclast differentiation in vitro and validate these findings through in vivo experiments. We employed MTS assays to assess the potential proliferative or toxic effects of BQTL on bone marrow macrophages (BMMs) at various concentrations. TRAcP experiments were conducted to examine BQTL's impact on osteoclast differentiation. RT-PCR and Western blot analyses were utilized to evaluate the relative expression levels of osteoclast-specific genes and proteins under BQTL stimulation. Finally, in vivo experiments were performed using an osteoporosis model to further validate the in vitro findings. This study revealed that BQTL suppressed receptor activator of NF-κB ligand (RANKL)-induced osteoclastogenesis and osteoclast resorption activity in vitro in a dose-dependent manner without observable cytotoxicity. The inhibitory effects of BQTL on osteoclast formation and function were attributed to the downregulation of NFATc1 and c-fos activity, primarily through attenuation of the MAPK, NF-κB, and Calcineurin signaling pathways. BQTL's inhibitory capacity was further examined in vivo using an ovariectomized (OVX) rat model, demonstrating a strong protective effect against bone loss. BQTL may serve as an effective therapeutic TCM for the treatment of postmenopausal osteoporosis and the alleviation of bone loss induced by estrogen deficiency and related conditions.
Animals ; NFATC Transcription Factors/genetics* ; Drugs, Chinese Herbal/pharmacology* ; Ovariectomy ; Osteoclasts/metabolism* ; Female ; Osteogenesis/drug effects* ; Rats, Sprague-Dawley ; Rats ; NF-kappa B/genetics* ; Osteoporosis/genetics* ; Signal Transduction/drug effects* ; Bone Resorption/genetics* ; Cell Differentiation/drug effects* ; Humans ; RANK Ligand/metabolism* ; Mitogen-Activated Protein Kinases/genetics* ; Transcription Factors

As global greenhouse gases continue rising, the urgency of more ambitious action is clearer than ever before. China is the world's biggest emitter of greenhouse gases and one of the countries affected most by climate change. The evidence about the impacts of climate change on the environment and human health may encourage China to take more decisive action to mitigate greenhouse gas emissions and adapt to climate impacts. This article aimed to review the evidence of environmental damages and health risks posed by climate change and to provide a new science-based perspective for the delivery of sustainable development goals. Over recent decades, China has experienced a strong warming pattern with a growing frequency of extreme weather events, and the impacts of climate change on China's environment and human health have been consistently observed, with increasing O ₃ air pollution, decreases in water resources and availability, land degradation, and increased risks for both communicable and non-communicable diseases. Therefore, China's climate policy should target the key factors driving climate change and scale up strategic measures to curb carbon emissions and adapt to inevitable increasing climate impacts. It provides new insights for not only China but also other countries, particularly developing and emerging economies, to ensure climate and environmental sustainability whilst pursuing economic growth.
Climate Change ; China ; Humans ; Greenhouse Gases ; Air Pollution ; Sustainable Development ; Environment

The main active compound, 3,4-dihydroxyacetophenone(3,4-DHAP), in the leaves of Ilex pubescens var. glaber, exhibits various pharmacological activities, including vasodilation and heart protection. Currently, natural extraction and chemical synthesis are the primary methods for obtaining 3,4-DHAP, but both approaches have inherent challenges. To address these problems, this study explored the whole-cell bioconversion of 1-(4-hydroxyphenol)-ethanol to 3,4-DHAP using recombinant Escherichia coli, cultivated in a green, cost-effective medium at room temperature and atmospheric pressure. Firstly, this study successfully constructed recombinant E. coli S1, which contained only the HpaBC gene, and recombinant E. coli S3, which contained both the Hped and HpaBC genes. The ability of S1 and S3 to synthesize 3,4-DHAP from their respective substrates was then evaluated through whole-cell bioconversion. Based on these results, the effects of four factors, i.e., substrate concentration, IPTG concentration, induction temperature, and transformation temperature, on the whole-cell bioconversion yield of S3 were investigated using an orthogonal experiment. The results showed that the factors influenced the yield in the following order: transformation temperature > induction temperature > IPTG concentration > substrate concentration. The optimal conditions were found to be a transformation temperature of 35 ℃, IPTG concentration of 0.1 mmol·L~(-1), induction temperature of 25 ℃, and substrate concentration of 10 mmol·L~(-1). Finally, the effect of transformation time on the yield of 3,4-DHAP was further examined under the optimal conditions. The results indicated that as the transformation time increased, the yield of 3,4-DHAP steadily increased. The highest yield of 260 mg·L~(-1) with a productivity of 17% was achieved after 72 hours of transformation. In conclusion, this study successfully achieved the whole-cell bioconversion of 1-(4-hydroxyphenol)-ethanol to 3,4-DHAP using recombinant E. coli for the first time, laying the groundwork for further optimization and development of the biosynthesis of 3,4-DHAP.
Escherichia coli/genetics* ; Acetophenones/chemistry* ; Ethanol/chemistry* ; Drugs, Chinese Herbal/chemistry* ; Biotransformation

Medical device related infections caused by bacteria are common complications in clinical practice,and preventing bacterial colonization on the surface of medical materials is one of the important challenges in the medical field.Therefore,there is an urgent need to construct medical coatings that combine antibacterial properties and biocompatibility.In this study,a γ-polyglutamic acid(γ-PGA)complex with long-chain alkyl quaternary ammonium salts formed by electrostatic and hydrophobic interactions was prepared,which was insoluble in water but soluble in organic solvents(e.g.,ethanol),and was capable of constructing antimicrobial coatings on the surfaces of medical materials in a simple and efficient manner.The bactericidal effect of the coating was verified using viable bacteria counting experiments,and the results showed that the bactericidal rate of the coated thermoplastic polyurethane(TPU)membrane against Staphylococcus aureus was greater than 99.9%compared with that of the uncoated TPU membrane.In addition,a cytotoxicity assay was performed using the L929 fibroblast and cell proliferation detection kit(CCK-8),which showed that the survival rate of L929 fibroblasts on coated TPU was greater than 90%.Meanwhile,the hemolysis rate of coated erythrocytes was tested using fresh rabbit red blood cells(RBCs),and the hemolysis rate on the coated TPU surface was 1.5%.The above results indicated that the coating had good biocompatibility.The preparation method of medical antibacterial coating reported in this study provided a new idea for preventing bacterial infections related to implantable/interventional medical devices.

OBJECTIVE: To evaluate the short-and medium-term efficacy of posterior medial branch block in the treatment of persistent pain after percutaneous vertebral augmentation. METHODS: From January 2018 to January 2023, a total of 1, 062 patients with osteoporotic vertebral compression fractures underwent percutaneous vertebral augmentation. Among them, 32 elderly patients who experienced persistent low back pain after surgery and subsequently received posterior medial branch block and cryoablation were included. Six patients died during follow-up, leaving 26 patients for final analysis (1 male, 25 females). The mean age was (82.96±5.66) years (ranged, 76 to 94 years). The mean body mass index was (23.76±3.08) kg·m^-2(ranged 18.1 to 27.2 kg·m^-2). The bone mineral density T-value ranged from -2.5 to -4.3 with a mean of (-3.09±0.56). The mean volume of bone cement injected was 6.00 (5.38, 7.00) ml. Fracture locations were T₁₁ (2 cases), T₁₂ (7 cases), L₁ (10 cases), L₂ (6 cases), and L₃ (1 case). The mean interval from vertebral augmentation to block treatment was (7.12±2.22) months (rangd 6 to 12 months). The vertebral augmentation procedures were percutaneous kyphoplasty(PKP) in 12 cases and percutaneous vertebroplasty (PVP) in 14 cases. At the 2nd week, 3rd month, and 6th month after the block, the numerical rating scale(NRS), Oswestry disability index(ODI), patient satisfaction, and pain relief rate at the 6th month were evaluated. Relationships between pain relief rate at the 6th month after the last treatment and possible influencing factors were analyzed. RESULTS: Compared with X-ray films after percutaneous vertebral augmentation, the X-ray films before block showed an increase in kyphotic angle and vertebral compression rate, with statistically significant differences(P<0.05). At the 2nd week, 3rd month, and 6th month after posterior medial branch block and cryoablation, NRS and ODI scores were significantly lower than before the block(P<0.05). Among the 26 patients, 5 received additional cryoablation. At the 6th month after the last treatment, 19 patients reported excellent or good satisfaction. Univariate binary Logistic analysis showed all P>0.05, and no independent factor affecting final satisfaction or pain relief at 6 months after the last treatment was identified. CONCLUSION Posterior medial branch block(with cryoablation) can effectively improve short-and medium-term symptoms and function in patients with persistent axial low back pain after percutaneous vertebral augmentation for osteoporotic vertebral fractures.
Humans ; Male ; Female ; Aged ; Spinal Fractures/surgery* ; Aged, 80 and over ; Osteoporotic Fractures/surgery* ; Vertebroplasty/adverse effects* ; Nerve Block/methods*

OBJECTIVES: To investigate the clinical features of children with STAT gene mutations, and to explore corresponding immunotherapy strategies. METHODS: A retrospective analysis was performed for the clinical data of 10 children with STAT gene mutations who were admitted to the Department of Pediatrics of the First Affiliated Hospital of Guangzhou Medical University, from October 2015 to October 2024. Exploratory immunotherapy was implemented in some refractory cases, and the changes in symptoms, imaging manifestations, and cytokine levels were assessed after treatment. RESULTS: For the 10 children, the main clinical manifestations were recurrent rash since birth (7/10), cough (8/10), wheezing (5/10), expectoration (4/10), and purulent nasal discharge (4/10). Genotyping results showed that there was one child with heterozygous loss-of-function (LOF) mutation in the STAT1 gene, four children with heterozygous LOF mutation in the STAT3 gene, and five children with heterozygous gain-of-function (GOF) mutation in the STAT3 gene. Two children with LOF mutation in the STAT3 gene showed decreased interleukin-6 levels and improved clinical symptoms and imaging findings after omalizumab treatment. Three children with GOF mutation in the STAT3 gene achieved effective disease control after treatment with methylprednisolone (0.5 mg/kg per day). Two children with GOF mutation in the STAT3 gene received treatment with JAK inhibitor and then showed some improvement in symptoms. CONCLUSIONS STAT gene mutation screening should be considered for children with recurrent rash and purulent respiratory tract infections. Targeted immunotherapy may improve prognosis in patients with no response to conventional treatment.
Humans ; Male ; Immunotherapy ; Female ; Child, Preschool ; Child ; Gain of Function Mutation ; Retrospective Studies ; Infant ; Loss of Function Mutation ; STAT Transcription Factors/genetics*