Objective:To investigate the application and clinical efficacy of customized, 3D-printed femoral bone marrow stems in the revision of tumor prostheses.Methods:A retrospective analysis was performed for the data of 11 patients (7 males and 4 females) aged 53.1±11.7 years (range, 38-75 years), who underwent 3D-printed customized revision of femoral intramedullary stems due to loosening of femoral tumor prostheses at the 960th Hospital of the Joint Support Force of the PLA from June 2021 to June 2023. The pathological types of tumors associated with the initial surgeries included 4 cases of giant cell tumor of bone, 5 cases of osteosarcoma, 1 case of chondrosarcoma, and 1 case of plasma cell tumor. The tumor was located at the distal femur in 8 cases and the proximal femur in 3 cases. The procedures included 3 initial revisions, 7 secondary revisions, and 1 tertiary revision. The average limb shortening measured 4.6±2.2 cm (range, 2.5-9.0 cm). Prior to revision, all prostheses were fixed with bone cement, revealing enlargement of the femoral medullary cavity and cortical bone thinning. Among them, 5 cases had intramedullary stems permeabilizing the femoral cortex, and 1 case had femoral cleavage fractures. All 11 patients received personalized data for the design and 3D printing of femoral bone marrow stems.Results:The lengths and diameters of the 3D-printed porous femoral bone marrow stems ranged from 80 to 160 mm and 20 to 22 mm, respectively. Ten patients were fitted with cylindrical intramedullary handles, while one received a conical intramedullary handle. A successful revision with the 3D-printed stems was achieved in 10 patients; however, 1 case failed to accommodate the conical handle and was instead revised with a bone cement prosthesis. During the implantation of the intramedullary stems, three patients experienced minor cortical splitting, which was managed with bundling and fixation during the procedure. Immediate stability was attained for all prostheses during surgery, yet postoperative limb shortening did not undergo significant correction. All patients exhibited normal healing of their postoperative incisions. The visual analog scale for limb pain decreased significantly from 8.0±0.8 points before surgery to 1.0±0.4 points three months postoperatively ( t=25.957, P<0.001). By six months after the surgery, none of the patients reported any limb pain. Follow-up data for all 11 patients indicated an average follow-up duration of 25.2±7.5 months (range, 16-36 months), during which limb function improved satisfactorily. The Musculoskeletal Tumor Society (MSTS) score increased from 7.9±1.4 points preoperatively to 20.9±2.7 points at the last follow-up, with this change also being statistically significant ( t=14.229, P<0.001). Imaging evaluations revealed normal lower limb force lines, no rotation or longitudinal displacement of the prosthetic stem, and successful integration with the femur. Conclusion:Personalized intramedullary stems produced through 3D printing demonstrate significant clinical effectiveness in femoral tumor prosthesis revision surgery, making them a viable option for such procedures.

Objective:To investigate the application and clinical efficacy of customized, 3D-printed femoral bone marrow stems in the revision of tumor prostheses.Methods:A retrospective analysis was performed for the data of 11 patients (7 males and 4 females) aged 53.1±11.7 years (range, 38-75 years), who underwent 3D-printed customized revision of femoral intramedullary stems due to loosening of femoral tumor prostheses at the 960th Hospital of the Joint Support Force of the PLA from June 2021 to June 2023. The pathological types of tumors associated with the initial surgeries included 4 cases of giant cell tumor of bone, 5 cases of osteosarcoma, 1 case of chondrosarcoma, and 1 case of plasma cell tumor. The tumor was located at the distal femur in 8 cases and the proximal femur in 3 cases. The procedures included 3 initial revisions, 7 secondary revisions, and 1 tertiary revision. The average limb shortening measured 4.6±2.2 cm (range, 2.5-9.0 cm). Prior to revision, all prostheses were fixed with bone cement, revealing enlargement of the femoral medullary cavity and cortical bone thinning. Among them, 5 cases had intramedullary stems permeabilizing the femoral cortex, and 1 case had femoral cleavage fractures. All 11 patients received personalized data for the design and 3D printing of femoral bone marrow stems.Results:The lengths and diameters of the 3D-printed porous femoral bone marrow stems ranged from 80 to 160 mm and 20 to 22 mm, respectively. Ten patients were fitted with cylindrical intramedullary handles, while one received a conical intramedullary handle. A successful revision with the 3D-printed stems was achieved in 10 patients; however, 1 case failed to accommodate the conical handle and was instead revised with a bone cement prosthesis. During the implantation of the intramedullary stems, three patients experienced minor cortical splitting, which was managed with bundling and fixation during the procedure. Immediate stability was attained for all prostheses during surgery, yet postoperative limb shortening did not undergo significant correction. All patients exhibited normal healing of their postoperative incisions. The visual analog scale for limb pain decreased significantly from 8.0±0.8 points before surgery to 1.0±0.4 points three months postoperatively ( t=25.957, P<0.001). By six months after the surgery, none of the patients reported any limb pain. Follow-up data for all 11 patients indicated an average follow-up duration of 25.2±7.5 months (range, 16-36 months), during which limb function improved satisfactorily. The Musculoskeletal Tumor Society (MSTS) score increased from 7.9±1.4 points preoperatively to 20.9±2.7 points at the last follow-up, with this change also being statistically significant ( t=14.229, P<0.001). Imaging evaluations revealed normal lower limb force lines, no rotation or longitudinal displacement of the prosthetic stem, and successful integration with the femur. Conclusion:Personalized intramedullary stems produced through 3D printing demonstrate significant clinical effectiveness in femoral tumor prosthesis revision surgery, making them a viable option for such procedures.

Objective:To understand nurses' experiences providing discharge preparation services for elderly patients with multiple chronic diseases and offer references for developing intervention strategies for discharge preparation services for these patients.Methods:A purposive sampling method was used to select 24 nurses from the cardiovascular departments, geriatrics wards, and other internal medicine departments of three Grade A tertiary hospitals, four Grade B hospitals, and one community health service center in Guilin City between March and April 2024. An interview outline was developed based on the social-ecological system theory, and semi-structured interviews were conducted to collect data. A directed content analysis method was used to analyze the data.Results:A total of three themes were identified: micro-level (nurses have a positive attitude but face shortcomings in age-appropriate discharge preparation services), meso-level (team collaboration mechanisms are weak), and macro-level (there is a desire to link social resources) .Conclusions:Nurses' discharge preparation services for elderly patients with multiple chronic diseases are inadequate. It is recommended to enhance nurses' discharge preparation skills through core competency-based training, improve the development of innovative healthcare platforms, and promote establishing of a multi-dimensional social care support system to improve the quality of discharge preparation services for elderly patients with multiple chronic diseases.

Objective:To understand nurses' experiences providing discharge preparation services for elderly patients with multiple chronic diseases and offer references for developing intervention strategies for discharge preparation services for these patients.Methods:A purposive sampling method was used to select 24 nurses from the cardiovascular departments, geriatrics wards, and other internal medicine departments of three Grade A tertiary hospitals, four Grade B hospitals, and one community health service center in Guilin City between March and April 2024. An interview outline was developed based on the social-ecological system theory, and semi-structured interviews were conducted to collect data. A directed content analysis method was used to analyze the data.Results:A total of three themes were identified: micro-level (nurses have a positive attitude but face shortcomings in age-appropriate discharge preparation services), meso-level (team collaboration mechanisms are weak), and macro-level (there is a desire to link social resources) .Conclusions:Nurses' discharge preparation services for elderly patients with multiple chronic diseases are inadequate. It is recommended to enhance nurses' discharge preparation skills through core competency-based training, improve the development of innovative healthcare platforms, and promote establishing of a multi-dimensional social care support system to improve the quality of discharge preparation services for elderly patients with multiple chronic diseases.

A case report of multiple neuropathic arthropathy in a patient with syphilis was reported. A 54-year-old man was admitted to the hospital 10 years ago due to edema and pain with limited motion for 3 d after a sprain in his right foot. Imaging examination then showed bone and joint destruction of the talus and scaphoid of the right foot. The talonavicular and calcaneocuboid joint arthrodesis was performed. Ten years later, he was admitted again due to pain in his left hip for 2 months after a fall. Present imaging examination showed disappearance of the femoral head and dislocation of the hip joint. Syphilitic neuroarthropathy was diagnosed and total hip arthroplasty was performed. After operation, the right foot and left hip yielded good results without obvious pain and joint dislocation. Literature review showed that the causes of neuropathic arthropathy were very wide, but multiple neuropathic arthropathy in patients with syphilis was rarely reported. The treatment of neuropathic arthropathy should be considered based on comprehensive factors such as the location of the affected joint, the degree of damage and the impact on function. The aim of treatment is to obtain painless, stable and functional joints. With sensory loss of the patients, enhancing restriction of the joint during surgery is of importance to effectively prevent postoperative dislocation and obtain good function.

Objective:To investigate the risk factors for 1-year survival rate in patients with spinal metastasis secondary to lung cancer.Methods:The data of 343 patients with spinal metastases secondary to lung cancer from January 2011 to December 2018 were retrospectively studied. There were 188 males (54.8%) and 155 females (45.2%) with an average age of 59.47±10.21 years old (range 23-91 years). The patients were divided into operation group (150 cases, 43.7%) and non operation group (193 cases, 56.3%). The demographics, types of primary tumor, non spinal metastasis, visceral metastasis, spinal metastasis and segments, pathological fractures of vertebra, Frankel classification, physical function status (Karnofsky performance scale, KPS), visual analogue score (VAS), the spinal instability neoplastic score (SINS) were recorded and analyzed. The impact of different treatments on the survival prognosis of patients with spinal metastasis was evaluated. The independent factors affecting survival in those patients were analyzed by Cox proportional hazards regression model.Results:The peak incidence of spinal metastases was found in the age group of 46-60 years (43.7%, 150/343). 38.5% (132/343) of the patients had pathological fractures of the involved vertebral body. 58.3% (200/343) of the patients had extraspinal bone metastasis. 36.2% (124/343) of the patients had visceral metastasis. Among the primary tumors, adenocarcinoma was the most common tpye (61.5%, 211/343), followed by large cell lung cancer (12.5%, 43/343), small cell lung cancer (6.4%, 22/343), squamous cell cancer (6.1%, 21/343) and mixed cell lung cancer (5.3%, 18/343). The type of lung cancer cells in about 8.2 (28/343) patients was unknown. Among the surgical patients, 21 patients underwent minimally invasive surgery (14.0%), 28 patients underwent simple decompression surgery (18.7%), 76 patients underwent separation surgery (50.7%), and 25 patients underwent radical surgery (16.6%). 59.3% (89/150) of the patients had a better neurological function than before surgery. The average survival time of all patients was 9.88 months with the median survival time of 8 (5,14) months. The survival rates were 62.1% (213/343), 30.0% (103/343), and 3.8% (13/343) at 6, 12, and 24 months, respectively. The average survival time of patients in the operation group was 10.24 months with the median survival time of 9 (5, 15) months, and the average survival time of patients in the non operation group was 9.41 months with the median survival time of 7 (5, 13) months with no significant difference between the groups (χ 2=0.300, P=0.584). Multivariate Cox proportional hazard regression model analysis showed that radiotherapy [ HR=1.913, 95% CI(1.471, 2.488), P<0.001], chemotherapy [ HR=1.313, 95% CI(1.040, 1.658), P=0.022], targeted drug therapy [ HR=1.683, 95% CI(1.221, 2.319), P=0.001], KPS [ HR=1.593, 95% CI(1.140, 2.225), P=0.006] and pathological type (non-small cell lung cancer) were independent factors affecting the 1-year survival rate of patients with spinal metastasis secondary to lung cancer [ HR=0.322, 95% CI(0.225, 0.460), P<0.001] with significant difference. Conclusion:Surgical treatment can improve both the neurological function and general status of patients with spinal metastasis. Treatments of radiotherapy, chemotherapy, and targeted drug therapy can significantly improve 1-year survival rate, while a KPS less than 50 points and a primary lung cancer other than adenocarcinoma were independent risk factors reducing 1-year survival rate.

Objective:To investigate the feasibility and early clinical efficacy of spherical motion axis hinge knee prosthesis to reconstruct distal femoral bone defects.Methods:A retrospective analysis was performed on 16 patients admitted to PLA 960th Hospital and Tianjin Hospital from October 2019 to November 2021, including 8 males and 8 females, with an average age of 43.3±17.8 years (range, 15-71 years). There were 13 patients of primary tumors of the distal femur and 3 patients of postoperative revision of knee joint prostheses. Among the 13 patients with distal femur tumors, there were 6 cases of osteosarcoma, 5 cases of giant cell tumor of bone, 1 case of leiomyosarcoma and 1 case of chondrosarcoma. The reasons for revision after prosthesis replacement in 3 cases were: 2 cases of aseptic loosening after tumor-type prosthesis and 1 case of periphery fracture of surface artificial knee prosthesis. A spherical shaft rotary hinged knee prosthesis was designed and fabricated to reconstruct postoperative femoral defects in 16 patients. Follow up regularly after the operation, recheck the X-ray film to evaluate the lower limb force line, evaluate the quality of life after the operation with the Chinese version of 36-item short-form (SF-36), and evaluate the postoperative limb function with the Musculoskeletal Tumor Society (MSTS) 93 evaluation system.Results:All 16 patients were successfully placed with prostheses, and except for 2 patients undergoing total femoral replacement, the length of bone defects was 18.2±11.7 cm (range, 8.6-47.1 cm) in other 14 patients, and the operation time was 138±19 min (range, 110-170 min), the intraoperative blood loss was 211±118 ml (range, 100-500 ml). The postoperative full length orthostatic X-ray film of the lower limbs showed that the distance between the mechanical axis of the lower limb and the center of the knee joint was 0.1 (0, 0.7) cm in 16 patients, and the hip-knee ankle angle was 179.0°±2.3°(range, 173.3°-182.2°). The patients were followed up for 12-36 months. No prosthesis complications were found in 16 patients. The SF-36 score was 56.7±7.0 (range, 42.7-67.4) for physiological function and 54.1±7.6 (range, 40.5-66.3) for psychological function. The maximum knee flexion angle was 120.0°±15.6° (range, 95°-130°). The MSTS 93 score of 15 patients with tumor was 25.0±1.7 (range, 22-28), including 7 excellent and 8 good. One patient developed liver and lung metastases 10 months after surgery and died 18 months after surgery. The remaining patients, as of the last follow-up, were alive and had no local recurrence or distant metastases. Tumor-free survival time was 25.8±8.4 months (range, 12-36 months).Conclusion:The spherical motion axis hinge knee prosthesis reconstruction for distal femoral bone defects is simple and fast in intraoperative prosthesis installation, and there are no prosthetic related complications during short-term follow-up. The clinical efficacy is satisfactory.

Since the implementation of surgery-based comprehensive treatment, there have been great advances and breakthroughs in the diagnosis and treatment of bone tumors. The survival rate of primary malignant bone tumors has significantly improved, for example, the 5-year survival rate of osteosarcoma has increased from 5%-20% to 60%-70%. Characteristics of bone tumors are as follows: (1) have a wide range of lesion sites; (2) various types; (3) high heterogeneity; (4) structural reconstruction is as important as functional reconstruction; (5) metastatic tumors are more common than primary tumors. Based on the characteristics above, the combination of clinical, imaging and pathology is the basic principle in the diagnosis of bone tumors; Following the principle of tumor resection to achieve local control, it is necessary not only to carry out effective reconstruction of bone and soft tissue structural defects, but also to obtain as perfect motor function as possible. Due to the development of genetic research, bioinformatics technology, digital medicine and computer technology, the diagnosis and treatment of bone tumors have entered the stage of precision medicine with four characteristics: accuracy, punctuality, sharing and individualization. Using the multi-omics technology of genomics, transcriptomics, proteomics and metabolomics to explore the mechanism of the occurrence and development of bone tumors and find new target genes provides a direction for the application of precision medicine in bone tumors in the future. The application of Wise Information Technology of med based on artificial intelligence is of great significance for the auxiliary diagnosis and precise treatment.

Osteosarcoma is the most common primary malignant bone tumor in children and adolescents. Neoadjuvant chemotherapy is an important part of the standard treatment mode for osteosarcoma. Preoperative evaluation of the effect of neoadjuvant chemotherapy is of great significance to the selection of surgical plan and the adjustment of subsequent treatment plan. Imaging evaluation method is one of the important ways to evaluate the efficacy of neoadjuvant chemotherapy and the prognosis of patients. It has the advantages of simple, quick and non-invasive, and has become a research hotspot.

Objective:To retrospectively analyze the patients with spinal metastases who received surgical intervention and summarize the evolution of their clinical and pathological characteristics and surgical methods.Methods:The data of 703 patients with spinal metastases from January 2007 to December 2018 were collected retrospectively. There were 395 males (56.19%, 395/703) and 308 females (43.81%, 308/703) with an average age of 58.14±11.46 years (range 13-84 years). According to the degree of invasion and thoroughness of tumor resection, the surgical methods could be divided into minimally invasive surgery, decompression surgery, separation surgery, piecemeal resection and total en-bloc spondylectomy surgery. The operative methods were minimally invasive surgery in 89 cases (12.66%), decompression surgery in 96 cases (13.66%), separation surgery in 303 cases (43.10%), piecemeal resection in 182 cases (25.89%) and total en-bloc spondylectomy in 33 cases (4.69%). To analyze the trend of the clinical, pathological types and surgical treatment of patients with spinal metastases over the years, and determine the relevant factors affecting the decision-making of surgical methods by multivariate logistic regression.Results:The ratio of male to female was 1.28:1. 39.54% (278/703) of patients with single-segment involvement in 703 patients, 24.04% (169/703) of patients with double-segment metastasis and 36.42% (256/703) of patients with multi-segment metastasis. The most common type of primary tumor was lung cancer (34.57%, 243/703), followed by breast cancer (8.25%, 58/703), myeloma (8.11%, 57/703), gastrointestinal tumor (6.82%, 48/703) and renal malignant tumor (6.40%, 45/703). From 2007 to 2018, there was no significant difference in the percentage change of different age, gender and primary tumor source composition (age: χ 2=14.01, P=0.233; gender: χ 2=35.73, P=0.341; primary tumor: χ 2=120.09, P=0.074). The percentage of patients with sacrococcygeal metastasis decreased from 20.00% in 2008 to 1.89% in 2017 and the difference was statistically significant (χ 2=8.09, P=0.005). The percentage of patients with multi-level metastasis increased from 26.67% in 2008 to 52.83% in 2017, and the difference was statistically significant (χ 2=7.23, P=0.007). The percentage of patients with minimally invasive surgery decreased from 25.00% in 2007 to 5.88% in 2018, and the percentage of patients with segmented resection decreased from 53.33% in 2008 to 10.29% in 2018. The proportion of the two surgical methods showed a significant downward trend, and the differences were statistically significant (minimally invasive surgery: χ 2=1.46, P=0.026; segmented resection surgery: χ 2=19.56, P<0.001). The percentage of patients undergoing separation surgery increased from 13.33% in 2008 to 64.71% in 2018, and the proportion of patients undergoing total en-bloc spondylectomy increased from 0 in 2007 to 10.29% in 2018. Both surgical methods showed a significant growth trend and the differences were statistically significant (separation surgery: χ 2=27.09, P<0.001; χ 2=4.16, P=0.042). Multivariate Logistic regression analysis showed that age, metastatic site, number of metastatic segments, pathological vertebral fractures, Frankel grade, SINS score and VAS score were independent factors influencing surgical decision-making ( P<0.05). Conclusion:With different time and age, the invasiveness and thoroughness of surgery are increasing, which shows that the percentage of patients who underwent separation surgery and to-tal en-bloc spondylectomy is significantly increasing. Age, metastatic site, number of metastatic segments, pathological vertebral fractures, Frankel grade, SINS score and VAS score are independent factors affecting surgical decision-making.