A rare case of Langerhans cell histiocytosis (LCH) combined with Erdheim-Chester disease (ECD) in the tibia is presented. A 55-year-old female patient experienced a six-month history of left lower leg pain of unknown origin, which progressively worsened over the past month and was accompanied by restricted mobility. Radiographic imaging revealed patchy, mixed-density shadows within the medullary cavities of the middle and lower segments of both tibiae and fibulae. Magnetic resonance imaging (MRI) showed extensive abnormal signal areas in the lower segments of the left tibia and fibula, as well as in the left talus and calcaneus. Positron emission tomography-computed tomography (PET-CT) demonstrated significantly increased diffuse radioactive uptake in the middle and lower segments of both femora, the upper and lower segments of the tibiae, the bilateral talus, the distal radius, and symmetrical uptake in the bilateral elbow joints. Additionally, mild radionuclide uptake was observed in the bilateral clavicles and the upper segment of the right femur. The initial diagnosis suggested a space-occupying lesion in the tibia with a suspicion of ECD. Histopathological examination of a biopsy from the left tibial lesion indicated a histiocytic proliferative disorder. After a multidisciplinary consultation, a definitive diagnosis of LCH with fibrous hyperplasia and extensive infiltration of foam cells, along with scattered multinucleated giant cells, was established. The presence of the BRAFV600E mutation further supported the concurrent diagnosis of ECD. Subcutaneous interferon-α therapy was initiated. Two years later, pulmonary lesions were identified. Computed tomography (CT) revealed multiple round nodules in both lungs, chronic inflammatory changes, and fibrous cord-like lesions. Consequently, interferon treatment was discontinued, and oral vemurafenib was administered. After three years of follow-up, chest CT demonstrated a significant reduction in chronic inflammatory lesions and fibrous cords, along with a decrease in nodule size. Currently, after four years of continuous follow-up, the patient remains in stable condition, experiences no significant discomfort, and continues to receive vemurafenib maintenance therapy. A review of the literature suggests that the co-occurrence of LCH and ECD is rare, often leading to misdiagnosis or delayed diagnosis. While no standardized treatment protocol exists, patients harboring the BRAFV600E mutation may benefit from BRAF inhibitors such as vemurafenib.

Objective To investigate the establishment and evaluation of an idiopathic pulmonary fibrosis(IPF)mouse model induced by the intratracheal infusion of bleomycin(BLM)of different concentrations.Methods Male C57BL/6J mice were randomly divided into a control group,Model-L group(1.5 mg/kg,BLM),Model-M group(2.5 mg/kg,BLM),and Model-H group(3.5 mg/kg,BLM).An IPF mouse model was constructed by one-time intratracheal infusion of BLM.The general status,body mass,survival rate,and lung coefficient of mice in different groups were compared.Pathological changes in lung tissue,the hydroxyproline content,fibrosis markers and inflammatory factor levels were observed.Results Compared with the control group,the survival rate decreased and body weight showed a downward trend in the low-,medium-,and high-dose model groups,with significant increases in lung coefficients.Inflammatory infiltration(P＜0.01)and collagen deposition(P＜0.0001)were observed in the lung tissues of all model groups.Hydroxyproline levels in lung tissue and serum were significantly elevated(P＜0.05).The mRNA levels of fibrosis markers α-Sma,Fn1,and Col1a1 were upregulated(P＜0.001),with significant increases in corresponding protein expression(P＜0.05).The mRNA expression of the inflammatory factor Tgfb1 also increased(P＜0.0001).Conclusion 1.5,2.5 and 3.5 mg/kg BLM can induce an IPF model in C57BL/6J mice.Based on the results observed for survival rate,body mass,lung coefficient changes,lung tissue gross and pathological changes,and fibrosis-related biomarkers,2.5 mg/kg BLM is the optimal concentration for inducing an IPF mouse model.

BACKGROUND:Mitophagy is closely associated with the development of idiopathic pulmonary fibrosis,but its mechanism remains unclear.OBJECTIVE:To investigate the biological mechanism of mitophagy in idiopathic pulmonary fibrosis and provide ideas for the risk prediction of idiopathic pulmonary fibrosis and subtype differentiation.METHODS:The mitophagy-related genes in idiopathic pulmonary fibrosis were obtained through GEO and Reactome Pathway databases.The mitophagy-related characteristic genes in idiopathic pulmonary fibrosis were screened based on intergroup differences and random forest model.GO functional enrichment analysis and KEGG,Reactome with WIKI pathway enrichment analyses were performed by g:Profiler database.Mitophagy subtypes in idiopathic pulmonary fibrosis were distinguished by consensus clustering method and immune infiltration analysis was performed.The mitophagy-related key gene was screened.Finally,the predictive value of mitophagy-related key gene for the risk of idiopathic pulmonary fibrosis was quantified by alignment diagram and the correlation between mitophagy-related key gene and clinical characteristics of idiopathic pulmonary fibrosis was explored.RESULTS AND CONCLUSION:(1)A total of 13 genes related to mitophagy in idiopathic pulmonary fibrosis were identified and 5 characteristic genes were screened,containing PINK1,RPS27A,SRC,HIF1A,and CDH6.(2)GO analysis was mainly involved in ubiquitin protein ligase binding,and cellular response to hypoxia.Pathway enrichment analysis was mainly involved in PINK1-PRKN mediated mitophagy,NOTCH signaling pathway,signaling by EGFR and angiogenesis.(3)HIF1A had significant expression differences between subtypes,which might serve as a key gene for the differentiation of mitophagy subtypes of idiopathic pulmonary fibrosis.(4)Immune infiltration analysis suggested that myeloid-derived suppressor cell,neutrophil and type 1 T helper cell might have infiltration differences between subtypes,while HIF1A was positively correlated with multiple immune cells.(5)Alignment diagram suggested that the risk of idiopathic pulmonary fibrosis might be predicted by the expression level of HIF1A.(6)Clinical characteristics analysis indicated patients with high expression of HIF1A might have poorer lung function and more severe fibrosis.It is concluded that PINK1,RPS27A,SRC,HIF1A,and CDH6 may influence the development of idiopathic pulmonary fibrosis through mitophagy,in which HIF1A may serve as a key gene for risk prediction with clinical subtype differentiation and HIF1A is strongly associated with the lung function of patients.

BACKGROUND:Mitophagy is closely associated with the development of idiopathic pulmonary fibrosis,but its mechanism remains unclear.OBJECTIVE:To investigate the biological mechanism of mitophagy in idiopathic pulmonary fibrosis and provide ideas for the risk prediction of idiopathic pulmonary fibrosis and subtype differentiation.METHODS:The mitophagy-related genes in idiopathic pulmonary fibrosis were obtained through GEO and Reactome Pathway databases.The mitophagy-related characteristic genes in idiopathic pulmonary fibrosis were screened based on intergroup differences and random forest model.GO functional enrichment analysis and KEGG,Reactome with WIKI pathway enrichment analyses were performed by g:Profiler database.Mitophagy subtypes in idiopathic pulmonary fibrosis were distinguished by consensus clustering method and immune infiltration analysis was performed.The mitophagy-related key gene was screened.Finally,the predictive value of mitophagy-related key gene for the risk of idiopathic pulmonary fibrosis was quantified by alignment diagram and the correlation between mitophagy-related key gene and clinical characteristics of idiopathic pulmonary fibrosis was explored.RESULTS AND CONCLUSION:(1)A total of 13 genes related to mitophagy in idiopathic pulmonary fibrosis were identified and 5 characteristic genes were screened,containing PINK1,RPS27A,SRC,HIF1A,and CDH6.(2)GO analysis was mainly involved in ubiquitin protein ligase binding,and cellular response to hypoxia.Pathway enrichment analysis was mainly involved in PINK1-PRKN mediated mitophagy,NOTCH signaling pathway,signaling by EGFR and angiogenesis.(3)HIF1A had significant expression differences between subtypes,which might serve as a key gene for the differentiation of mitophagy subtypes of idiopathic pulmonary fibrosis.(4)Immune infiltration analysis suggested that myeloid-derived suppressor cell,neutrophil and type 1 T helper cell might have infiltration differences between subtypes,while HIF1A was positively correlated with multiple immune cells.(5)Alignment diagram suggested that the risk of idiopathic pulmonary fibrosis might be predicted by the expression level of HIF1A.(6)Clinical characteristics analysis indicated patients with high expression of HIF1A might have poorer lung function and more severe fibrosis.It is concluded that PINK1,RPS27A,SRC,HIF1A,and CDH6 may influence the development of idiopathic pulmonary fibrosis through mitophagy,in which HIF1A may serve as a key gene for risk prediction with clinical subtype differentiation and HIF1A is strongly associated with the lung function of patients.

Objective To investigate the establishment and evaluation of an idiopathic pulmonary fibrosis(IPF)mouse model induced by the intratracheal infusion of bleomycin(BLM)of different concentrations.Methods Male C57BL/6J mice were randomly divided into a control group,Model-L group(1.5 mg/kg,BLM),Model-M group(2.5 mg/kg,BLM),and Model-H group(3.5 mg/kg,BLM).An IPF mouse model was constructed by one-time intratracheal infusion of BLM.The general status,body mass,survival rate,and lung coefficient of mice in different groups were compared.Pathological changes in lung tissue,the hydroxyproline content,fibrosis markers and inflammatory factor levels were observed.Results Compared with the control group,the survival rate decreased and body weight showed a downward trend in the low-,medium-,and high-dose model groups,with significant increases in lung coefficients.Inflammatory infiltration(P＜0.01)and collagen deposition(P＜0.0001)were observed in the lung tissues of all model groups.Hydroxyproline levels in lung tissue and serum were significantly elevated(P＜0.05).The mRNA levels of fibrosis markers α-Sma,Fn1,and Col1a1 were upregulated(P＜0.001),with significant increases in corresponding protein expression(P＜0.05).The mRNA expression of the inflammatory factor Tgfb1 also increased(P＜0.0001).Conclusion 1.5,2.5 and 3.5 mg/kg BLM can induce an IPF model in C57BL/6J mice.Based on the results observed for survival rate,body mass,lung coefficient changes,lung tissue gross and pathological changes,and fibrosis-related biomarkers,2.5 mg/kg BLM is the optimal concentration for inducing an IPF mouse model.

A rare case of Langerhans cell histiocytosis (LCH) combined with Erdheim-Chester disease (ECD) in the tibia is presented. A 55-year-old female patient experienced a six-month history of left lower leg pain of unknown origin, which progressively worsened over the past month and was accompanied by restricted mobility. Radiographic imaging revealed patchy, mixed-density shadows within the medullary cavities of the middle and lower segments of both tibiae and fibulae. Magnetic resonance imaging (MRI) showed extensive abnormal signal areas in the lower segments of the left tibia and fibula, as well as in the left talus and calcaneus. Positron emission tomography-computed tomography (PET-CT) demonstrated significantly increased diffuse radioactive uptake in the middle and lower segments of both femora, the upper and lower segments of the tibiae, the bilateral talus, the distal radius, and symmetrical uptake in the bilateral elbow joints. Additionally, mild radionuclide uptake was observed in the bilateral clavicles and the upper segment of the right femur. The initial diagnosis suggested a space-occupying lesion in the tibia with a suspicion of ECD. Histopathological examination of a biopsy from the left tibial lesion indicated a histiocytic proliferative disorder. After a multidisciplinary consultation, a definitive diagnosis of LCH with fibrous hyperplasia and extensive infiltration of foam cells, along with scattered multinucleated giant cells, was established. The presence of the BRAFV600E mutation further supported the concurrent diagnosis of ECD. Subcutaneous interferon-α therapy was initiated. Two years later, pulmonary lesions were identified. Computed tomography (CT) revealed multiple round nodules in both lungs, chronic inflammatory changes, and fibrous cord-like lesions. Consequently, interferon treatment was discontinued, and oral vemurafenib was administered. After three years of follow-up, chest CT demonstrated a significant reduction in chronic inflammatory lesions and fibrous cords, along with a decrease in nodule size. Currently, after four years of continuous follow-up, the patient remains in stable condition, experiences no significant discomfort, and continues to receive vemurafenib maintenance therapy. A review of the literature suggests that the co-occurrence of LCH and ECD is rare, often leading to misdiagnosis or delayed diagnosis. While no standardized treatment protocol exists, patients harboring the BRAFV600E mutation may benefit from BRAF inhibitors such as vemurafenib.

Objective:To analyze the influence of forming direction on the surface characteristics,elastic modulus,bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction,and to provide scientific basis and guidance for the clinical applica-tion of oral denture base resin materials.Methods:The 3D printing technology was used to print denture base resin samples.The shape and size of the samples referred to the current standard for testing conven-tional denture base materials.The samples used for physical performance testing were cylindrical(with a diameter of 15 mm and a thickness of 1 mm)and printed at different angles along the Z axis(0°,45°,90°).Scanning electron microscope was used to observe the microscopic topography of the different sam-ples.The color stability of different samples was observed by color stabilizer.The surface roughness of the samples was analyzed by using surface roughness tester.The Vickers hardness was measured to ana-lyze the hardness of the samples.The samples used for mechanical performance testing were rectangular(elastic modulus and bending strength:A length of 64 mm,a width of 10 mm,and a height of 3.3 mm;fracture toughness:A length of 39 mm,a width of 8 mm,and a height of 4 mm),divided into two groups:W group and H group.The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X,Y axis plane,while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X,Y axis plane.The forming angles of both groups were equally divided into 0°,45°,and 90°.The elastic modulus,bending strength and fracture toughness of different samples were studied through universal mechanical testing machine.SPSS 22.0 software was used for statistical analysis.Results:The microscopic topogra-phy and roughness of different samples were closely related to the printing direction,with significant differences between the 0°,45°,and 90° specimens.The 0° specimens had the smoothest surface(roughness＜1 μm).The surface of the 45 ° specimen was the roughest(roughness＞3 μm).The microhardness of the 0° sample was the best[(196.13±0.20)MPa],with a significant difference com-pared with the 90° sample[(186.62±4.81)MPa,P＜0.05].The mechanical properties of different samples were also closely related to the printing direction.The elastic modulus,bending strength,and fracture toughness of the 45° samples in the W group were the highest compared with the other groups.The results of elastic modulus showed that in the H group,the 45° specimens had the highest elastic mo-dulus,which was significantly different from the 0° and 90° specimens(P＜0.05).The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens(P＜0.05).The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group.The bending strength of the 90° specimens in the W group was the smallest,and there was a significant difference between 90° and the 0° and 45° specimens(P＜0.05);And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group(P＜0.05).The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2,which was specified in the denture base standard.The 45° samples in the W group were the highest,with significant differences compared with the 0° and 90° samples(P＜0.05).And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2.And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group(P＜0.05).Conclusion:The 0° samples had rela-tively better physical properties.The 45° samples had the best mechanical properties.But the fracture toughness of specimens(H group and 90° samples of W group)did not yet meet clinical requirements.That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction.Only when the performance of the printed samples in all directions met the minimum require-ments of the standard,they could be used in clinical practice.

Objective:To assess the clinical features and effectiveness of antiviral therapy in newborns with sensorineural hearing loss (SNHL) caused by congenital congenital cytomegalovirus (cCMV) infection, and to speculate the risk factors for poor hearing outcomes.Methods:A multicenter prospective cohort study wasconducted, enrolling 176 newborns diagnosed with cCMV at four research centers in Zhejiang Province from March 1, 2021, to April 30, 2024. Clinical characteristics at birth were recorded and hearing was followed up. The children were divided into groups based on their condition at birth, specifically into asymptomatic, mild symptom, and moderate to severe symptom groups. Additionally, they were divided into SNHL and normal hearing groups based on the results of air conduction brainstem audiometry at birth. And they were also divided into treatment and untreated groups according to antiviral treatment. Mann Whitney U test, and chi square test were used for inter group comparison to analyze the differences in clinical features between different disease groups, and to analyze the effects of clinical features, antiviral therapy, and other factors on hearing improvement. Logistic regression analysis was employed to identify the risk factors influencing hearing outcomes. Results:Among the cohort of 176 children diagnosed infection with cCMV, 90 cases were male and 86 cases were female. Of these, 79 cases were asymptomatic, 12 cases classified as mild cCMV and 85 cases as moderate to severe cCMV. Fifty cases belonged to SNHL group, with different degrees of severity, including 30 cases of mild, 9 cases of moderate, 5 cases of severe, and 6 cases of extremely severe SNHL. Among the 121 cases in the normal hearing group, 2 cases (1.7%) exhibited late-onset hearing loss despite having normal hearing at birth. Among 81 cases (46.0%) who completed the hearing follow-up, 71 cases (87.7%) had good hearing outcomes and 10 cases (12.3%) had poor hearing outcomes. Among the 81 children, 29 cases (35.8%) had SNHL at birth. During follow-up, the hearing threshold improved in 19 cases (65.5%), remained stable in 7 cases (24.1%) and progressed in 3 cases (10.3%). A total of 26 cases in the treatment group and 55 cases in the untreated group completed the hearing follow-up assessment. The rate of hearing improvement in the treatment group was found to be higher compared to the untreated group (13 cases (50.0%) vs. 6 cases (10.9%), χ2=15.00, P<0.01), with individuals in the treatment group having a 4.58 times greater likelihood of experiencing hearing improvement ( RR=4.58,95% CI 1.96-10.70, P<0.05). However, no statistically significant difference was observed in hearing outcomes between the antiviral treatment group and the untreated group ( RR=0.90, 95% CI 0.57-1.41, P=0.517). Multivariate analysis further confirmed SNHL ( OR=11.58, 95% CI 2.10-63.93, P=0.005) and preterm birth ( OR=4.98, 95% CI 1.06-23.41, P=0.042) as independent risk factors for poor hearing outcomes. Conclusions:SNHL resulting from cCMV infection presents symptoms at birth and can be improved by antiviral therapy. Poor hearing outcomes are associated with SNHL and prematurity.

By reviewing ancient materia medica， medical and prescription books， combined with modern literature， the textual research of Stephaniae Tetrandrae Radix has been conducted to verify the name， origin， producing area， harvesting and processing methods. Through textual research， the results show that the mainstream name of this herb recorded in the past dynasties is Fangji， which is also called Hanzhong Fangji because it is produced in Hanzhong city， and after the Tang dynasty， it was gradually divided into Hanfangji and Mufangji， and there is the saying that Han Zhushuiqi， Mu Zhufengqi. The names of Fenfangji and Guangfangji were first seen in the republic of China. In addition， Fenfangji was once distributed in Hankou， so it was also known as "Hanfangji"， which is easily confused with the traditional Hanzhong Fangji for short. Based on the original research， it is concluded that Aristolochia heterophylla（Hanzhong Fangji）is the mainstream of Stephaniae Tetrandrae Radix used in the Qing dynasty and before， and the application history of Cocculus orbiculatus can be traced back to before the Tang dynasty. After the Ming dynasty， Stephania tetrandra gradually became another main origin， and in the Republic of China， A. fangchi was used as a medicine for Stephaniae Tetrandrae Radix， but in modern times it was banned because it contained aristolochic acid as a toxic ingredient， and S. tetrandra has become the mainstream legal origin. The traditional production area of Hanzhong Fangji is Hanzhong， Shaanxi province， while today the mainstream of S. tetrandra is manly produced in Jiangxi and other places. Based on the quality evaluation research， the quality of Hanzhong Fangji is better with the radial texture of section used as radial solution， yellow solid and fragrant. Fenfangji with solid quality， white inside， powdered enough， less fiber and radiating texture is better. From the harvesting and processing research， the root of Fangji is mostly harvested in spring and autumn， and the outer bark should be removed in some literature. Before the Ming dynasty， this herb was dried in the shade， and after the Ming dynasty， it was dried in the sun. The modern production processing of Fangji is to harvest it in autumn， wash it， remove the rough bark， dry it to half dry， cut it into sections， and then cut it longitudinally if it is large， and dry it. Based on the results， combined with current studies on the toxicity of aristolochic acid and influencing factors such as commercial circulation， it is suggested that S. tetrandra should be used as the origin of Fangji， the processed products are selected according to the prescription requirements， and those without specified requirements can be processed by referring to the raw products in the 2020 edition of Chinese Pharmacopoeia.

Objective:To explore the trans-membrane signaling mechanism of interleukin-6 (IL-6)-induced osteogenic differentiation and calcification of human umbilical artery smooth muscle cells (HUASMCs).Methods:HUASMCs were primarily cultured in vitro and were stimulated with IL-6, IL-6+solutable IL-6 receptor (sIL-6R), IL-6+sIL-6R+solutable gp130 (sgp130), or vehicle (blank control). Alizarin red and Von Kossa staining were used for detecting cell calcification, Western blot was used to test the protein expression of tissue-nonspecific alkaline phosphatase (TNAP), osteopontin (OPN), bone morphogenetic protein-2 (BMP-2) and Runt related transcription factor 2 (Runx2), and immunofluorescence was used to examine the mIL-6R expression of HUASMCs. The comparison of measurement date between the two groups was conducted by t-test. The comparison of measurement date between multiple groups was conducted by one-way analysis of variance (ANOVA). Results:The intensity severity of calcification stain was IL-6+sIL-6R group >IL-6+sIL-6R+sgp130 group>IL-6 group=blank control. After stimulated for 12 hours, the TNAP expression in blank control, IL-6 group, IL-6+sIL-6R group, IL-6+sIL-6R+sgp130 group were (0.44±0.08), (0.52±0.14), (0.84±0.16) and (0.55±0.10) respectively ( F=290.96, P<0.001). After stimulated for 3 days, the OPN expression in blank control, IL-6 group, IL-6+sIL-6R group, IL-6+sIL-6R+sgp130 group were (0.61±0.84), (0.95±0.16), (1.65±0.24) and (0.99±0.10) respectively ( F=507.72, P<0.001). After stimulated for 12 hours, the BMP-2 expression in blank control, IL-6 group, IL-6+sIL-6R group, IL-6+sIL-6R+sgp130 group were (0.77±0.05), (1.69±0.16), (2.81±0.26) and (0.57±0.12) respectively ( F=959.09, P<0.001). After stimulated for 3 days, the Runx2 expression in blank control, IL-6 group, IL-6+sIL-6R group,IL-6+sIL-6R+sgp130 group were (0.57±0.03) , (0.92±0.10), (1.31±0.13) and (0.66±0.06) respectively ( F=1141.27, P<0.001). Comparing with Jurkat cells (positive control) and CEM cells (negative control), HUASMCs limited expressed mIL-6R. Conclusion:IL-6 may induce HUASMCs osteogenic differentiation and calcification mainly via the sIL-6R-mediated trans-signaling pathway.