Objective:To evaluate the clinical effectiveness of high tibial osteotomy (HTO) assisted by digital orthopedic techniques in the treatment of varus knee osteoarthritis secondary to tibial fracture malunion.Methods:The clinical data were retrospectively analyzed of the 16 patients who had been admitted to Clinical Application Center of Digital Orthopedic Technology, Tianjin Hospital for varus knee osteoarthritis secondary to tibial fracture malunion from April 2022 to October 2023. There were 6 men and 10 women, with an age of (56.3±1.6) years and a mean body mass index of (23.8±0.9) kg/m 2. HTO was performed for all the patients using patient-specific instrumentation integrated osteotomy and orthopedic guide which was designed and printed with digital orthopedic techniques. If preoperative imaging indicated symptomatic meniscus injury (tear), intraarticular free body, or intercondylar fossa stenosis in a patient, arthroscopic clearance was first conducted before subsequent performance of HTO at one stage. Clinical effectiveness was evaluated by measuring and comparing hip-knee-ankle angle (HKA), medial proximal tibial angle (MPTA), posterior tibial slope (PTS), lower limb weight-bearing line (WBL) ratio, Western Ontario and McMaster University (WOMAC) osteoarthritis index, visual analogue scale (VAS) pain score and knee range of motion (ROM) before surgery and 12 months after surgery. Results:The operative time was (41.3±2.1) min and intraoperative fluoroscopy was performed only once in all the patients. All the wounds healed by the first stage with no such complications as hinge point fracture, wound infection, vascular injury, nerve injury, delayed union or nonunion of fracture, lower limb deep venous thrombosis, loosening of internal fixation, or plate rupture. The follow-up time for the 16 patients was (16.3±0.7) months. At 12 months after surgery, the HKA (179.5°±0.5°), MPTA (91.7°±0.5°), WBL ratio (61.2%±0.4%), WOMAC osteoarthritis index [(12.8±0.8) points], VAS pain score [(1.8±0.3) points] and knee ROM (121.8°±1.8°) were significantly better than those before surgery [166.6°±1.3°, 81.8°±0.4°, 29.6%±1.0%, (38.4±2.1) points, (4.8±0.3) points, and 110.5°±2.1°] ( P < 0.05). There was no significant difference in PTS between pre-surgery and 12 months after surgery ( P > 0.05). Conclusions:When HTO is used to treat varus knee osteoarthritis secondary to tibial fracture malunion, assistance of digital orthopedic techniques can improve HKA, MPTA, lower limb alignment, and knee ROM to reduce and recover knee function for the patients.

Objective:To evaluate the clinical effect of derotational distal femoral osteotomy (DDFO) combined with medial patellofemoral ligament (MPFL) reconstruction assisted by digital orthopedic technique in the treatment of recurrent patellar dislocation with enlarged femoral anteversion angle (FAA).Methods:TThe clinical data of 18 patients (4 men and 14 women; mean age 22.1±0.7 years; range, 18-26 years) with recurrent patellar dislocation (FAA≥30°) admitted to Digital Orthopedic Technology Clinical Application Center in Tianjin hospital from May 2022 to December 2023 were retrospectively analyzed. The average number of patella dislocations were 3.6±0.4 (range, 2-8 times), with a mean symptom duration of 4.3±0.4 years (range, 2-7 years). According to Dejour classification of femoral trochlea dysplasia, there were 5 cases of type A, 3 cases of type B, 6 cases of type C and 4 cases of type D. All patients underwent 3D CT scanning and digital modeling before operation. Based on the modeling results, personalized osteotomy and orthopedic integration guide were designed and printed to direct intraoperative DDFO and MPFL reconstruction. Radiological parameters, knee function and complications were assessed during follow-up. Knee function assessments included visual analogue scale (VAS), Intemational Knee Documentation Committee Knee Form (IKDC), Kujala, Lysholm and Tegner score. The radiological parameters included FAA, patellar tilt angle (PTA), tibial tuberosity-trochlear groove distance (TT-TG) and caton-deschamps index (CDI).Results:All patients underwent surgery and were followed up for 15.4±2.8 months (range, 12-20 months). Complications occurred in 3 patients, including deep venous thrombosis in 2 cases and wound effusion in 1 case. No other complications such as wound infection, nerve injury, vascular injury, fracture nonunion or patella dislocation were recorded. The VAS score improved from 5.4±0.3 preoperatively to 2.1±0.2 at one year postoperatively. The IKDC score improved from 44.4±2.7 to 79.2±1.9 points. The Kujala score improved from 51.8±2.6 to 86.1±1.6, the Lysholm from 49.8±2.5 to 84.9±1.5, and the Tegner score from 2.2±0.2 to 4.1±0.2. The FAA decreased from 39.7°±1.2° to 14.9°±0.2°, the PTA from 33.1°±2.6° to 12.6°±1.4°, and the TT-TG from 20.2±0.6 to 13.9±0.4 mm. The differences between time of all the above-mentioned parameters were statistically significant ( P<0.05). The CDI remained stable, which changed from 1.03±0.02 preoperatively to 1.07±0.01 one year after operation ( P>0.05). Conclusions:After the application of DDFO combined with MPFL reconstruction assist by personalized osteotomy and orthopedic integrated guide, the patient's knee function and imaging parameters were significantly improved at one-year follow-up. In the treatment of recurrent patellar dislocation with enlarged FAA, good early clinical efficacy could be achieved with this operation.

Objective:To evaluate the clinical efficacy of 3D-printed patient-specific instrument (PSI) in assisting high tibial osteotomy (HTO).Methods:Clinical studies on 3D-printed PSI-assisted HTO were retrieved from various databases, including China National Knowledge Infrastructure (CNKI), Wanfang Data Knowledge Service Platform, VIP, the Chinese Medical Journal Full-text Database, PubMed, Embase, and Web of Science. Key data extracted included the hip-knee-ankle (HKA) angle, weight-bearing line (WBL) ratio, mechanical medial proximal tibial angle (MPTA), number of intraoperative fluoroscopies, and operation time. Studies were categorized into a PSI group (using 3D-printed PSI for osteotomy) and a non-PSI group (without 3D-printed PSI assistance). Comparisons were made between pre- and post-operative radiographic improvements in the PSI group, as well as differences between post-operative outcomes and pre-operative planned values. Additionally, the number of fluoroscopies and operation time were compared between the PSI and non-PSI groups. Meta-analysis was performed using Stata 12.0 statistical softwar.Results:A total of 30 studies were included in the meta-analysis. The results indicated that in the PSI group, the post-operative WBL ratio [ WMD=-39.66, 95% CI(-43.19, -36.12), P<0.001], HKA [ WMD=-8.85, 95% CI(-10.17, -7.52), P<0.001], and MPTA [ WMD=-8.65, 95% CI(-9.61, -7.68), P<0.001] were significantly smaller compared to pre-operative values. However, there were no significant differences between the post-operative values and pre-operative planned values for the WBL ratio [ WMD=0.74, 95% CI(-0.17, 1.66), P=0.112], HKA [ WMD=0.20, 95% CI(-0.05, 0.45), P=0.116], or MPTA [ WMD=0.22, 95% CI(-0.04, 0.48), P=0.147] in the PSI group. Furthermore, the operation time [ WMD=-14.04, 95% CI(-17.66, -10.42), P<0.001] and the number of fluoroscopies [ WMD=-9.33, 95% CI(-12.36, -6.30), P<0.001] were significantly lower in the PSI group compared to the non-PSI group. Conclusion:3D-printed PSI-assisted HTO enhances precision, reduces operation time, and minimizes the number of intraoperative fluoroscopies.

Objective:To evaluate the clinical effect of derotational distal femoral osteotomy (DDFO) combined with medial patellofemoral ligament (MPFL) reconstruction assisted by digital orthopedic technique in the treatment of recurrent patellar dislocation with enlarged femoral anteversion angle (FAA).Methods:TThe clinical data of 18 patients (4 men and 14 women; mean age 22.1±0.7 years; range, 18-26 years) with recurrent patellar dislocation (FAA≥30°) admitted to Digital Orthopedic Technology Clinical Application Center in Tianjin hospital from May 2022 to December 2023 were retrospectively analyzed. The average number of patella dislocations were 3.6±0.4 (range, 2-8 times), with a mean symptom duration of 4.3±0.4 years (range, 2-7 years). According to Dejour classification of femoral trochlea dysplasia, there were 5 cases of type A, 3 cases of type B, 6 cases of type C and 4 cases of type D. All patients underwent 3D CT scanning and digital modeling before operation. Based on the modeling results, personalized osteotomy and orthopedic integration guide were designed and printed to direct intraoperative DDFO and MPFL reconstruction. Radiological parameters, knee function and complications were assessed during follow-up. Knee function assessments included visual analogue scale (VAS), Intemational Knee Documentation Committee Knee Form (IKDC), Kujala, Lysholm and Tegner score. The radiological parameters included FAA, patellar tilt angle (PTA), tibial tuberosity-trochlear groove distance (TT-TG) and caton-deschamps index (CDI).Results:All patients underwent surgery and were followed up for 15.4±2.8 months (range, 12-20 months). Complications occurred in 3 patients, including deep venous thrombosis in 2 cases and wound effusion in 1 case. No other complications such as wound infection, nerve injury, vascular injury, fracture nonunion or patella dislocation were recorded. The VAS score improved from 5.4±0.3 preoperatively to 2.1±0.2 at one year postoperatively. The IKDC score improved from 44.4±2.7 to 79.2±1.9 points. The Kujala score improved from 51.8±2.6 to 86.1±1.6, the Lysholm from 49.8±2.5 to 84.9±1.5, and the Tegner score from 2.2±0.2 to 4.1±0.2. The FAA decreased from 39.7°±1.2° to 14.9°±0.2°, the PTA from 33.1°±2.6° to 12.6°±1.4°, and the TT-TG from 20.2±0.6 to 13.9±0.4 mm. The differences between time of all the above-mentioned parameters were statistically significant ( P<0.05). The CDI remained stable, which changed from 1.03±0.02 preoperatively to 1.07±0.01 one year after operation ( P>0.05). Conclusions:After the application of DDFO combined with MPFL reconstruction assist by personalized osteotomy and orthopedic integrated guide, the patient's knee function and imaging parameters were significantly improved at one-year follow-up. In the treatment of recurrent patellar dislocation with enlarged FAA, good early clinical efficacy could be achieved with this operation.

Objective:To evaluate the clinical efficacy of 3D-printed patient-specific instrument (PSI) in assisting high tibial osteotomy (HTO).Methods:Clinical studies on 3D-printed PSI-assisted HTO were retrieved from various databases, including China National Knowledge Infrastructure (CNKI), Wanfang Data Knowledge Service Platform, VIP, the Chinese Medical Journal Full-text Database, PubMed, Embase, and Web of Science. Key data extracted included the hip-knee-ankle (HKA) angle, weight-bearing line (WBL) ratio, mechanical medial proximal tibial angle (MPTA), number of intraoperative fluoroscopies, and operation time. Studies were categorized into a PSI group (using 3D-printed PSI for osteotomy) and a non-PSI group (without 3D-printed PSI assistance). Comparisons were made between pre- and post-operative radiographic improvements in the PSI group, as well as differences between post-operative outcomes and pre-operative planned values. Additionally, the number of fluoroscopies and operation time were compared between the PSI and non-PSI groups. Meta-analysis was performed using Stata 12.0 statistical softwar.Results:A total of 30 studies were included in the meta-analysis. The results indicated that in the PSI group, the post-operative WBL ratio [ WMD=-39.66, 95% CI(-43.19, -36.12), P<0.001], HKA [ WMD=-8.85, 95% CI(-10.17, -7.52), P<0.001], and MPTA [ WMD=-8.65, 95% CI(-9.61, -7.68), P<0.001] were significantly smaller compared to pre-operative values. However, there were no significant differences between the post-operative values and pre-operative planned values for the WBL ratio [ WMD=0.74, 95% CI(-0.17, 1.66), P=0.112], HKA [ WMD=0.20, 95% CI(-0.05, 0.45), P=0.116], or MPTA [ WMD=0.22, 95% CI(-0.04, 0.48), P=0.147] in the PSI group. Furthermore, the operation time [ WMD=-14.04, 95% CI(-17.66, -10.42), P<0.001] and the number of fluoroscopies [ WMD=-9.33, 95% CI(-12.36, -6.30), P<0.001] were significantly lower in the PSI group compared to the non-PSI group. Conclusion:3D-printed PSI-assisted HTO enhances precision, reduces operation time, and minimizes the number of intraoperative fluoroscopies.

Objective:To evaluate the clinical effectiveness of high tibial osteotomy (HTO) assisted by digital orthopedic techniques in the treatment of varus knee osteoarthritis secondary to tibial fracture malunion.Methods:The clinical data were retrospectively analyzed of the 16 patients who had been admitted to Clinical Application Center of Digital Orthopedic Technology, Tianjin Hospital for varus knee osteoarthritis secondary to tibial fracture malunion from April 2022 to October 2023. There were 6 men and 10 women, with an age of (56.3±1.6) years and a mean body mass index of (23.8±0.9) kg/m 2. HTO was performed for all the patients using patient-specific instrumentation integrated osteotomy and orthopedic guide which was designed and printed with digital orthopedic techniques. If preoperative imaging indicated symptomatic meniscus injury (tear), intraarticular free body, or intercondylar fossa stenosis in a patient, arthroscopic clearance was first conducted before subsequent performance of HTO at one stage. Clinical effectiveness was evaluated by measuring and comparing hip-knee-ankle angle (HKA), medial proximal tibial angle (MPTA), posterior tibial slope (PTS), lower limb weight-bearing line (WBL) ratio, Western Ontario and McMaster University (WOMAC) osteoarthritis index, visual analogue scale (VAS) pain score and knee range of motion (ROM) before surgery and 12 months after surgery. Results:The operative time was (41.3±2.1) min and intraoperative fluoroscopy was performed only once in all the patients. All the wounds healed by the first stage with no such complications as hinge point fracture, wound infection, vascular injury, nerve injury, delayed union or nonunion of fracture, lower limb deep venous thrombosis, loosening of internal fixation, or plate rupture. The follow-up time for the 16 patients was (16.3±0.7) months. At 12 months after surgery, the HKA (179.5°±0.5°), MPTA (91.7°±0.5°), WBL ratio (61.2%±0.4%), WOMAC osteoarthritis index [(12.8±0.8) points], VAS pain score [(1.8±0.3) points] and knee ROM (121.8°±1.8°) were significantly better than those before surgery [166.6°±1.3°, 81.8°±0.4°, 29.6%±1.0%, (38.4±2.1) points, (4.8±0.3) points, and 110.5°±2.1°] ( P < 0.05). There was no significant difference in PTS between pre-surgery and 12 months after surgery ( P > 0.05). Conclusions:When HTO is used to treat varus knee osteoarthritis secondary to tibial fracture malunion, assistance of digital orthopedic techniques can improve HKA, MPTA, lower limb alignment, and knee ROM to reduce and recover knee function for the patients.

Objective To investigate the dietary patterns of rural residents in the high-incidence areas of esophageal cancer (EC), and to explore the clustering and influencing factors of risk factors associated with high-incidence characteristics. Methods A special structured questionnaire was applied to conduct a face-to-face survey on the dietary patterns of rural residents in Yanting county of Sichuan Province from July to August 2021. Univariate and multivariate logistic regression models were used to analyze the influencing factors of risk factor clustering for EC. Results There were 838 valid questionnaires in this study. A total of 90.8% of rural residents used clean water such as tap water. In the past one year, the people who ate fruits and vegetables, soybean products, onions and garlic in high frequency accounted for 69.5%, 32.8% and 74.5%, respectively; the people who ate kimchi, pickled vegetables, sauerkraut, barbecue, hot food and mildew food in low frequency accounted for 59.2%, 79.6%, 68.2%, 90.3%, 80.9% and 90.3%, respectively. The clustering of risk factors for EC was found in 73.3% of residents, and the aggregation of two risk factors was the most common mode (28.2%), among which tumor history and preserved food was the main clustering pattern (4.6%). The logistic regression model revealed that the gender, age, marital status and occupation were independent influencing factors for the risk factors clustering of EC (P<0.05). Conclusion A majority of rural residents in high-incidence areas of EC in Yanting county have good eating habits, but the clustering of some risk factors is still at a high level. Gender, age, marital status, and occupation are influencing factors of the risk factors clustering of EC.

Objective To study the effect of Ditan Decoction combined with aripiprazole and olanzapine in the treatment of schizophrenia and its influence on serum inflammatory factors chnage.Methods Seventy-seven patients with schizophrenia meeting the requirements visiting the outpatient department and hospitalized in Dazu District Hospital of Traditional Chinese Medicine and Dazu District Mental Health Center from July 2021 to March 2023 were selected as the study subjects and divided into the observation group(n=38)and control group(n=39).The control group was treated with aripiprazole and olanzapine,and the observation group was combined with Ditan Decoction on the basis of the control group.After 8 weeks of treatment,the TCM syndrome scores,Positive and Negative Syndrome Scale(PANSS)score,serum inflammatory factors(IL-6,IL-1β,IL-17)levels were compared between the two groups.Results The total effective rate was 97.37％in the observation group and 84.65％in the control group,and the difference was statistically signifi-cant(P＜0.05).The TCM syndrome score of each item and total scores after treatment in the observation group were lower than those in the control group(P＜0.05),the PANSS positive symptoms,negative symp-toms,general psychopathology and total scores in the observation group were lower than those in the control group(P＜0.05).The IL-17,IL-6 and IL-1β levels after treatment in observation group were lower than those in the control group(P＜0.05).Conclusion Ditan Decoction combined with aripiprazole and olanzapine has significant clinical efficacy in the treatment of schizophrenia,which could further reduce the symptom score of the patients and improve the serum inflammatory factors levels.The treatment is highly safe and worthy of clinical recommendation.

Osteotomy around the knee includes medial opening wedge high tibial osteotomy (HTO), lateral closing wedge HTO, lateral opening wedge distal femoral osteotomy (DFO), medial opening wedge DFO, and double-site osteotomy. Osteotomy redistributes the knee joint pressure by correcting the lower limb alignment, which can effectively delay the progression of knee osteoarthritis. Currently, three methods are used to determine the intraoperative osteotomy angle: the pre-drilling method, wedge block insertion method, and angle-guided linkage method. Coronal plane accuracy is evaluated using the hip-knee-ankle (HKA) angle, medial proximal tibial angle (MPTA), and ratio of lower limb weight-bearing line, while sagittal plane accuracy is assessed by measuring the posterior tibial slope (PTS). Individualized osteotomy guide plate can enhance osteotomy accuracy. The preparation process includes: (1) importing low-dose CT data of both lower limbs in DICOM format into reconstruction software to establish a 3D model of both lower limbs; (2) determining the osteotomy plane and distraction angle through threshold segmentation, importing the plate model, and establishing the length and position of each screw; (3) using fused deposition modeling to layer materials through a nozzle to create the 3D object. Individualized osteotomy guide plate in osteotomy around the knee can not only improve the accuracy of surgery, but also reduce the intraoperative fluoroscopy times and the incidence of complications. The operation efficiency and postoperative rehabilitation are better than those of traditional surgery. With the continuous upgrading of new materials and the improvement of design concepts, the accuracy and efficiency of individualized osteotomy guide will be further improved. Future research will focus on improving the degree of personalization of guide plate design and simplifying the manufacturing process.

Objective:To understand the epidemiological characteristics of mpox epidemic in Guangzhou and provide scientific evidence for the prevention and control of the disease.Methods:Based on the mpox surveillance system in Guangzhou, suspected mpox cases with fever and rash were reported by local hospitals at all levels to centers for disease control and prevention in Guangzhou for sampling, investigation and diagnosis. Descriptive epidemiological analysis was conducted on the clinical characteristics and treatment of the mpox cases and positive detection rate reported in Guangzhou as of 24:00 on June 23. Whole genome sequencing of the virus isolates was performed using Illumina Miniseq high-throughput sequencing platform.Results:The first mpox case in Guangzhou was reported on June 10 in 2023. As of 24:00 on June 23, a total of 25 confirmed mpox cases were reported. All the mpox cases were men with a M( Q1, Q3) of 32 (26, 36) years, the majority of the cases were MSM (96.0%). The main clinical features were rash (100.0%, 25/25), lymphadenectasis (100.0%, 25/25) and fever (52.0%, 13/25). Rash usually occurred near the genitals (88.0%, 22/25). The close contacts, mainly family members (40.4%, 23/57), showed no similar symptoms, such as fever or rash. The positive rate of mpox virus in household environment samples was 30.5%. The analyses on 3 complete gene sequences of mpox virus indicated that the strains belonged to West African type Ⅱb clade, B.1.3 lineage. Conclusions:Hidden transmission of mpox virus had occurred in MSM in Guangzhou. However, the size of affected population is relatively limited, and the possibility of wide spread of the virus is low.