Objective To analyze the main causes and risk factors of unplanned reoperation after liver transplantation. Methods The clinical data of 242 liver transplant recipients in the First Affiliated Hospital of Anhui Medical University from January 2015 to December 2024 were retrospectively analyzed. According to whether unplanned reoperation was performed during the same hospitalization after surgery, the recipients were divided into the reoperation group (n=36) and the non-reoperation group (n=206). The preoperative, intraoperative and postoperative data of the two groups, as well as donor and graft-related data, were compared to analyze the risk factors of unplanned reoperation after liver transplantation and the survival status of the two groups. Results Among the 242 liver transplant recipients, 36 underwent unplanned reoperations, with a total of 54 procedures including various laparotomies, endoscopic and interventional surgeries, among which there were 20 laparotomies, 18 endoscopic surgeries and 16 interventional surgeries. The most common cause of unplanned reoperation was biliary complications (20 times), followed by vascular complications (17 times). Compared with the non-reoperation group, the reoperation group had longer graft cold ischemia time, higher postoperative fatality rate of recipients, longer length of stay in the intensive care unit and postoperative hospital stay, and higher total hospitalization costs (all P<0.05). The incidence of unplanned reoperation was higher in recipients who underwent split liver transplantation (P<0.05). Multivariate analysis showed that intraoperative blood loss ≥1 000 mL, positive culture of graft perfusate and split liver transplantation were independent risk factors for unplanned reoperation (all P<0.05). The postoperative 7-day, 1-month, 3-month and 6-month survival rates of recipients in the reoperation group and the non-reoperation group were 100% vs. 98.1%, 88.9% vs. 94.2%, 69.4% vs. 90.8% and 66.7% vs. 90.8%, respectively, and the postoperative survival rate of recipients in the reoperation group was lower than that in the non-reoperation group (P<0.05). Conclusions The main causes of unplanned reoperation after liver transplantation are biliary complications, vascular complications, abdominal incision infection and intra-abdominal hemorrhage. Intraoperative massive blood loss, positive culture of graft perfusate and split liver transplantation are the risk factors associated with unplanned reoperation after liver transplantation.

Objective To construct prostate cancer(PCa)prediction models based on machine learning algorithms, so as to improve the accuracy of early diagnosis of PCa. Methods A retrospective analysis was performed on the clinical data of 504 patients who underwent prostate biopsy at our hospital during Jan. 2020 and Nov. 2024. Patients' age, body mass index(BMI), history of hypertension, diabetes and smoking, total prostate-specific antigen(tPSA), free prostate-specific antigen(fPSA), f/tPSA, prostate volume(PV), neutrophil count, lymphocyte count, neutrophil-to-lymphocyte ratio(NLR), Prostate Imaging Reporting and Data System(PI-RADS)score, digital rectal examination(DRE)results, and pathological findings were collected. The patients were divided into the training and testing sets at a ratio of 7:3. Ten early diagnosis prediction models of PCa were constructed using 10 supervised machine learning algorithms. Model performance was evaluated and validated using metrics including area under the receiver operating characteristic curve(AUC), accuracy, sensitivity, specificity, calibration curves, and decision curve analysis(DCA). SHAP analysis was used to interpret the models, and to clarify the importance of each feature and the basis for model decisions. Results All models showed good predictive value, with the gradient boosting machine(GBM)model performing the best(AUC=0.905, accuracy=84.1%, sensitivity=90.2%, specificity=80.0%). Calibration curves indicated good calibration and fitting of the GBM model, while DCA demonstrated favorable clinical net benefits. SHAP analysis identified the most significant features affecting PCa occurrence in descending order:tPSA, f/tPSA, PIRADS score, PV, age, and DRE. Conclusion The GBM model exhibits the optimal performance among the 10 models. The importance of features for predicting the occurrence of PCa, from the highest to the lowest, is as follows:tPSA, f/tPSA, PIRADS score, PV, age, and DRE.

In the field of organ donation and transplantation, the determination of death faces the dilemma of the separation between medical standards and social cognition, which may hinder medical practice and lead to controversial legal evaluations. Establishing brain death criteria through the "hard law" model is the path currently adopted by many countries. However, this approach has limitations, such as the attribution of the right to define death in the law, the conflict between the technological iteration of brain death criteria and legal stability, and the neglect of the social construction of the concept of death. Based on the theory of gradual social engineering and social systems theory, establishing brain death criteria through the "soft law" model has both scientific adaptability and governance flexibility, and is conducive to cultivating social consensus on brain death criteria. In terms of implementation, it is essential to focus on the high-level positioning of the "soft law" formulation entities for brain death criteria, the professionalization of the implementation entities, the publicization of the formulation process, and the institutionalization of risk communication strategies. At the same time, it is necessary to strengthen the informed consent of close relatives and design a dispute resolution mechanism for misjudgments of brain death to guard against potential improper risks.

ObjectiveTo construct a comprehensive evaluation indicator system for clinical practice guidelines of traditional Chinese medicine （TCM） that is scientific， systematic， and reflects the characteristics of TCM. MethodsA systematic search was conducted in Chinese and English databases， including CNKI， Wanfang， VIP， SinoMed， PubMed， Embase， and Cochrane Library， to include literature on domestic and international guideline evaluation tools and TCM-related research. Document analysis and CiteSpace were utilized for keyword co-occurrence and clustering analysis. ResultsA total of 65 relevant studies were included， from which seven core thematic domains were identified. Based on the research objectives， a two-step construction strategy was adopted： first， an external evaluation framework was established by referencing international tools to cover methodological rigor and procedural standardization； second， an internal evaluation framework was developed to reflect the distinctive features of TCM clinical practice， including syndrome differentiation and efficacy feedback. Through expert consensus， the indicator system was refined， resulting in a dual-layered structure comprising 8 primary indicators， 22 secondary indicators， and 62 evaluation criteria. ConclusionThe comprehensive evaluation system for TCM clinical practice guidelines， based on bibliometric analysis and core element extraction， integrates both theoretical integrity and practical applicability. This study provides a preliminary research foundation for further optimization， validation， and development of a refined comprehensive evaluation system.

Objective:To evaluate the clinical equivalence between a domestic calcipotriol/betamethasone dipropionate ointment and the originator product in the treatment of stable plaque psoriasis.Methods:A multicenter, randomized, double-blind, three-arm, parallel-group, active- and placebo-controlled study was conducted, and 449 patients aged 18 - 65 years with stable plaque psoriasis were enrolled from 25 hospitals (such as the First Affiliated Hospital of China Medical University). Eligible patients had a baseline physician's global assessment (PGA) score of ≥ 3 points, baseline body surface area (BSA) involvement of 5% - 30%, and a target lesion psoriasis area and severity index (TL-PASI) for plaque elevation of ≥ 3 points. Participants were randomly assigned in a 2:2:1 ratio to the test group ( n = 179), reference group ( n = 180), and placebo group ( n = 90), and applied the domestic calcipotriol/betamethasone dipropionate ointment, originator product, and ointment base respectively, once daily in the evening for 4 weeks. Efficacy and safety were assessed at weeks 1, 2, and 4. The primary efficacy endpoints were the treatment success rates and clinical success rates in each group at week 4. The per-protocol set (PPS) was used for the primary efficacy analysis, and the intention-to-treat (ITT) set for supplementary efficacy analysis. Equivalence between the test and reference preparations was tested using the Cochran-Mantel-Haenszel method adjusted for randomization strata. Superiority of the test and reference preparations over the placebo was also tested. Measurement data were compared among the 3 groups using analysis of variance or non-parametric tests, while treatment success rates, clinical success rates, and incidence rates of adverse reactions were compared using the chi-square test. Results:The ITT, PPS, and safety sets included 447, 420, and 448 patients, respectively. In the ITT set, patients were aged 43.6 ± 12.8 years, including 320 (71.6%) males and 127 (28.4%) females, and the disease duration was 11.21 ± 9.05 years; 316 (70.7%) had a PGA score of 3 points and 131 (29.3%) had a PGA score of 4 - 5 points. No significant differences in the baseline characteristics (including age, sex, disease duration and disease severity) were observed among the 3 groups (all P > 0.05). Based on the PPS analysis, the treatment success rates were 57.9% (99/171) in the test group, 50.3% (86/171) in the reference group, and 7.7% (6/78) in the placebo group, and the clinical success rates were 57.9% (99/171), 50.3% (86/171), and 10.3% (8/78), respectively; both the test and reference groups were superior to the placebo group in both treatment and clinical success rates (all P < 0.001) ; the rate differences for treatment success (90% confidence interval [ CI]: -1.3% - 16.4%) and clinical success (90% CI: -1.3% - 16.3%) between the test and reference groups were entirely within the pre-defined equivalence margin (-20% - 20%). Subgroup analyses by baseline PGA scores: for patients with a baseline PGA score of 3 points, the treatment success rates in the test, reference, and placebo groups were 60.8% (73/120), 52.1% (62/119), and 11.1% (6/54), respectively, and the corresponding clinical success rates were 61.7% (74/120), 53.8% (64/119), and 13% (7/54), respectively; the test and reference groups did not differ significantly in treatment or clinical success rates (both P > 0.05), but both showed higher success rates than the placebo group (all P < 0.001) ; the results of statistical comparisons among the 3 groups in patients with a baseline PGA score of 4 - 5 points were consistent with those observed in patients with a baseline PGA score of 3 points. The percentage reductions in PGA and TL-PASI scores from baseline to weeks 1, 2, and 4 showed significant differences among the 3 groups, which were significantly higher in the test and reference groups than in the placebo group (all P < 0.001), but did not differ between the test and reference groups (all P > 0.05). The primary adverse reactions were local skin reactions, such as pruritus, pain, and erythema. The incidence rates of adverse reactions were 8.9% (16/179) in the test group, 7.3% (13/179) in the reference group, and 7.8% (7/90) in the placebo group, with no significant difference among the 3 groups ( P > 0.05) . Conclusions:The domestic calcipotriol/betamethasone dipropionate ointment demonstrated clinical equivalence to the originator product in the treatment of stable plaque psoriasis, and the two agents exhibited comparable efficacy for patients with varying degrees of disease severity, and were comparable in the speed and degree of clinical improvement, with similar favorable safety profiles.

Objective To explore the application value of CT fusion navigation technology in Stanford B-type aortic dissection endovas-cular isolation surgery.Methods Nineteen patients who underwent Stanford B-type aortic dissection endovascular isolation surgery were selected.Prior to surgery,all patients underwent chest and abdominal CT plain scan and enhanced scan,and three-dimensional vascular reconstruction was performed at the post-processing workstation;During the operation,a chest(region of interest)digital subtraction angiography(DS A)3D-CT scan was first performed as the intraoperative matching localization image.Then,a thin-layer(1.0 mm)CT enhanced tomographic image of the chest and abdomen was extracted from the picture archiving and communication system(PACS).At the same time,the DSA 3D-CT image and the thin-layer CT enhanced image were opened for overlapping regis-tration of bony landmarks.After registration,the three-dimensional vascular volume rendering(VR)image of the aorta from the thin-layer CT was fused with the DSA 3D-CT,and the positioning and release of the covered stent were guided by the newly fused multimodal real-time image.Results All 19 patients underwent guided surgery with precise positioning of the covered lesions and successful release of the covered stents,with a success rate of 100％ for the guided technique.The intraoperative placement time of the covered stent was(5.4±2.4)s,the exposure time was(12.8±3.2)min,the surgical duration was(53.9±25.3)min,the intraopera-tive contrast agent dosage was(125.8±25.3)mL,the X-ray fluoroscopy dose was(221.3±155.7)mGy,and the total X-ray exposure dose was(1 056.4±330.3)mGy.There were no serious complications during the operation,and all patients received 1-3 months of follow-up which found they all recovered well.Conclusion The use of CT and DSA fusion navigation technology in guiding the treat-ment of Stanford B-type aortic dissection with covered stents provides real-time three-dimensional fusion images for the operator,which can quickly and accurately locate and release the stent,and has certain clinical value.

BACKGROUND:The elastic modulus of traditional solid titanium alloy implants is higher than that of human bone,and the resulting"stress shielding"phenomenon may affect the osseointegration of implants.Simultaneously,the wettability of 3D printed titanium alloy surface needs to be improved.OBJECTIVE:To prepare hydrophilic Gyroid implants with excellent biomechanical properties.METHODS:The 3D models of Gyroid implant,solid implant,mandibular bone and crown were established,and the mechanical properties of different implants were analyzed by finite element analysis.The Gyroid structure implant model was imported into the 3D printer to make the Gyroid structure implant materialized,and then the hydrophilic Gyroid structure implant with excellent mechanical properties and surface activity was prepared by sandblasting acid etching and ultraviolet functionalization.The morphology and hydrophilicity of 3D printed Ti6Al4V specimens before and after surface modification were analyzed by scanning electron microscopy and contact angle test.RESULTS AND CONCLUSION:(1)The finite element analysis results showed that under the vertical average bite force,the Gyroid structure could uniformly disperse the load acting on the implant into the entire structure.The load on the solid structure implant could only be dispersed on its outer surface and concentrated in the neck.The maximum equivalent stress of the Gyroid structure implant was 200.67 MPa,which did not exceed 50%of the yield strength of Ti6Al4V material.The maximum equivalent stress of the Gyroid structure implant on the surrounding bone tissue was 24.27 MPa,which was slightly higher than the maximum equivalent stress of the solid structure implant 17.32 MPa,and in the range of 20-60 MPa.The stimulation effect of the Gyroid structure implant on new bone formation was better than that of the solid structure implant.(2)The 3D printing technology could materialize the Gyroid structure implant model.Scanning electron microscopy showed that there were many unmelted spherical metal particles on the surface of the 3D printed Ti6Al4V specimens.After sandblasting and acid etching,a micron-scale mesh pore structure was formed on the surface,and no protruding metal particles were seen.The surface morphology of the superimposed UV functional treatment group was basically consistent with that after sandblasting and acid etching.The contact angle test results showed that the surface hydrophilicity of the specimens treated with ultraviolet functionalization plus sandblasting and acid etching was better than that of the sandblasting and acid etching and non-surface treatment groups.(3)The sandblasting and acid etching technology can remove the weakly connected metal particles on the 3D printed specimen and improve the similarity between the solid model and the design model.On this basis,the ultraviolet functionalization treatment can significantly improve the hydrophilicity of the 3D printed Gyroid structure implant surface without affecting its structure.

Objective To analyze the characteristics of coronary atherosclerosis(CAS)and the gender differences in type 2 diabetes mellitus(T2DM)patients without cardiovascular disease symptoms using coronary artery computed tomography(CCTA).Methods A total of 178 asymptomatic individuals with T2DM who underwent CCTA examination due to CAS risk factors were included in this analysis in 2019,and they were divided into male group(n=105)and female group(n=73)according to sex.The general data and biochemical indicators of patients of different genders were compared.Logistic regression was used to analyze the influencing factors of high-risk signs of CAS in patients with T2DM.The incidences of coronary artery involvement score(SIS)≥4 and segmental stenosis score(St.S)≥3 in male and female patients with different courses of DM were compared.Results The age and the proportion of hypertension in female patients with T2DM were higher than those in male patients(P<0.05),while the body mass index(BMI),smoking history,triglyceride(TG),total cholesterol(TC)/high-density lipoprotein cholesterol(HDL-C),and proportions of SIS≥4 were lower than those in male patients(P<0.05).Logistic regression analysis showed that the hypertension duration was an influencing factor for the occurrence of high-risk signs of CAS in patients with T2DM.The proportion of SIS≥4 in the female DM duration was higher than<5 years(P<0.05),and the proportion of SIS≥4 in>15 years was lower than<5 years(P<0.05).Conclusions The incidence of CAS high-risk signs in T2DM patients without cardiovascular symptoms is different between different sexes,the number of affected segments in women was related to the DM duration.

The implementation of the Good Pharmacovigilance Practice(GVP)in 2021 has laid a solid foundation for improving China's pharmacovigilance system,a matter of paramount importance currently emphasized by Marketing Authorization Holders(MAHs).Given the unique organizational structures of corporate groups,establishing a centralized pharmacovigilance system can optimize resource utilization.This paper analyzes the challenges faced by corporate groups in developing such central-ized systems and proposes an organizational framework with defined operational divisions.The findings aim to provide actionable insights for vaccine manufacturers in establishing and refining life cycle pharmacovigilance systems.

BACKGROUND: Skin cancer is a common skin disease whose incidence and mortality rates have been showing yearly increases. In this report, we update the most recent data on skin cancer as obtained from GLOBOCAN 2022. METHODS: The incidence and mortality rates of skin cancer (melanoma of skin and non-melanoma skin cancer) in GLOBOCAN 2022 were reviewed. These data were analyzed and the characteristics of incidence and mortality across five continents and top five countries and regions in each continent are presented. In addition, correlations between Human Development Index (HDI) and age-standardized incidence and mortality rates of these two skin cancers are described. RESULTS: The GLOBOCAN 2022 data indicated that melanoma was the 17th most common cancer. An estimated 331,722 people were diagnosed with melanoma globally and approximately 58,667 died from this disease. For non-melanoma skin cancer, it ranks as the 5th most common cancer, and an estimated 1,234,533 people were diagnosed with non-melanoma skin cancer globally and approximately 69,416 died from this disease. The incidence of skin cancer varies across geographic regions and countries, with a predominance observed in Oceania, North America, and Europe. Australia was ranked first in terms of incidence, while incidence rates in Africa and Asia were very low. Despite these regional differences in incidence, there was little geographic variation in mortality rates. Currently, the number of deaths from non-melanoma skin cancer exceeds that of melanoma of skin. HDI was positively associated with the incidence of both types of skin cancers, with a positive correlation obtained between HDI and mortality from melanoma of skin and a negative correlation between HDI and mortality from non-melanoma skin cancer. CONCLUSIONS Skin cancer remains a major disease burden worldwide. Substantial variations are observed across countries and regions. Further research on skin cancer will be required to provide a rationale for more effective preventions and treatments of this condition.
Humans ; Skin Neoplasms/mortality* ; Incidence ; Melanoma/mortality* ; Prevalence ; Global Health ; Male ; Female