Objective: This study aims to evaluate the clinical benefits of the integrated optical and magnetic surgical navigation system in assisting transforaminal endoscopic lumbar discectomy (TELD) for the treatment of lumbar disc herniation (LDH). Methods: A retrospective analysis was conducted on patients who underwent TELD for LDH at Beijing Chaoyang Hospital, Capital Medical University from November 2022 to December 2023. Patients treated with the integrated optical and magnetic surgical navigation system were defined as the navigation-guided TELD (Ng-TELD) group (30 cases), while those treated with the conventional x-ray fluoroscopy method were defined as the control group (31 cases). Record and compare baseline characteristics, surgical parameters, efficacy indicators, and adverse events between the 2 patient groups. Results: The average follow-up duration for the 61 patients was 11.8 months. Postoperatively, both groups exhibited significant relief from back and leg pain, which continued to improve over time. At the final follow-up, patients’ lumbar function and quality of life had significantly improved compared to preoperative levels (p < 0.05). The Ng-TELD group had significantly shorter total operation time (58.43 ± 12.37 minutes vs. 83.23 ± 25.90 minutes), catheter placement time (5.83 ± 1.09 minutes vs. 15.94 ± 3.00 minutes), decompression time (47.17 ± 11.98 minutes vs. 67.29 ± 24.23 minutes), and fewer intraoperative fluoroscopies (3.20 ± 1.45 vs. 16.58 ± 4.25) compared to the control group (p < 0.05). There were no significant differences between the groups in terms of efficacy evaluation indicators and hospital stay. At the final follow-up, the excellent and good rate of surgical outcomes assessed by the MacNab criteria was 98.4%, and the overall adverse event rate was 8.2%, with no statistically significant differences between the groups (p > 0.05). Conclusion This study demonstrates that the integrated optical and magnetic surgical navigation system can reduce the complexity of TELD, shorten operation time, and minimize radiation exposure for the surgeon, highlighting its promising clinical potential.

Following the release of the Technical Requirements on Quality Control and Standard Establishment of Traditional Chinese Medicine Formula Granules by the National Medical Products Administration in 2021, Chinese Pharmacopoeia Commission has promulgated 296 national drug standards so far, and most provinces have started the work of establishing provincial standards as supplements. The promulgation of standards fostered high-quality development of the industry. Since the implementation of national and provincial standards for more than three years, enterprises have gained deep understanding and hands-on experiences on the characteristics, technical requirements, production process, and quality control of traditional Chinese medicine(TCM) formula granules. Meanwhile, challenges have emerged restricting the high-quality development of this industry, including how to formulate quality control strategies for medicinal materials and decoction pieces, how to reduce manufacturing costs, and how to improve the pass rate and product stability under high standards. Based on the work experiences from standard management and process research, this article analyzed the distribution of sources, processing methods, dry extract rate ranges, process requirements for volatile oil-containing decoction pieces, control measures of safety indices, characteristics and trends of setting characteristic chromatograms or fingerprints, characteristics and trends of setting content ranges, and main differences between national standards and provincial standards. On the one hand, this article aims to present main characteristics for deeply understanding different indicators in standards and provide basic ideas for establishing quality and process control systems. On the other hand, from the perspective of industrial practice, suggestions are put forward on the important aspects that need to be focused on in the quality and process control of TCM formula granules.
Drugs, Chinese Herbal/chemistry* ; Quality Control ; Medicine, Chinese Traditional/standards* ; China ; Drug Industry/standards*

The chemical constituents were systematically separated from the roots of Berberis polyantha by various chromatographic methods, including silica gel column chromatography, HP20 column chromatography, polyamide column chromatography, reversed-phase C_(18) column chromatography, and preparative high-performance liquid chromatography. The structures of the compounds were identified by physicochemical properties and spectroscopic techniques(1D NMR, 2D NMR, UV, MS, and CD). Four phenylpropanoids were isolated from the methanol extract of the roots of B. polyantha, and they were identified as(2R)-1-(4-hydroxy-3,5-dimethoxyphenyl)-1-propanone-O-β-D-glucopyranoside(1), methyl 4-hydroxy-3,5-dimethoxybenzoate(2),(+)-syringaresinol(3), and syringaresinol-4-O-β-D-glucopyranoside(4). Compound 1 was a new compound, and other compounds were isolated from this plant for the first time. The anti-inflammatory activity of these compounds was evaluated based on the release of nitric oxide(NO) in the culture of lipopolysaccharide(LPS)-induced RAW264.7 macrophages. At a concentration of 10 μmol·L~(-1), all the four compounds inhibited the LPS-induced release of NO in RAW264.7 cells, demonstrating potential anti-inflammatory properties.
Plant Roots/chemistry* ; Animals ; Mice ; Berberis/chemistry* ; RAW 264.7 Cells ; Macrophages/immunology* ; Drugs, Chinese Herbal/isolation & purification* ; Nitric Oxide/metabolism* ; Molecular Structure ; Anti-Inflammatory Agents/isolation & purification*

Fuxiong has a long history of cultivation. Since its first record in the Beneficial Formulas from the Taiping Imperial Pharmacy of the Song Dynasty, Fuxiong had always been used by ancient physicians and became a preponderant variety for some reasons during the periods of the Ming Dynasty, Qing Dynasty, and Republic of China. However, as for modern use, only Chuanxiong Rhizoma is valued, and the medicinal value of Fuxiong is gradually being overlooked. This article systematically researches the nomenclature, producing area, origin, and efficacy of Fuxiong, proving that the planting technology of Fuxiong matured in the Song Dynasty at the latest, slightly later than the emergence of Chuanxiong Rhizoma in the Sui and Tang Dynasties. Over the years, the producing area of Fuxiong has not undergone significant changes, and it is mainly cultivated within Jiangxi province. According to the analysis of the origin of Xiongqiong, combined with modern genetic research, it can be basically clarified that the early source of Xiongqiong may not be single. With the popularization of cultivation, Chuanxiong Rhizoma became a Dao-di herb earliest, gradually replacing Xiongqiong and being recognized clinically. After cultivation, the polyploidy of Chuanxiong Rhizoma varieties formed stable inheritance, forming the later Fuxiong. Medical experts have gradually deepened their understanding of the efficacy of Fuxiong. Initially, they believed that it was a substitute for Chuanxiong Rhizoma and had weaker efficacy than Chuanxiong Rhizoma. Medical experts in Jin and Yuan Dynasties such as Zhu Danxi and Dai Sigong believed that Fuxiong was good at relieving stagnation. Books and records of materia medica in the Ming and Qing Dynasties explicitly proposed the great ability of Fuxiong to relieve stagnation. Fuxiong should be distinguished from Chuanxiong Rhizoma when applied, and the application differences should be clearly reflected in medical records. Based on the comprehensive research in this article, it can be concluded that although most of ancient physicians have attached great importance to genuineness of Chuanxiong Rhizoma, Fuxiong, as a dominant variety of traditional application, has a clear historical context and significant efficacy characteristics, worthy of further in-depth study.
Drugs, Chinese Herbal/history* ; China ; Medicine, Chinese Traditional/history* ; History, Ancient ; Humans ; History, Medieval ; Plants, Medicinal/chemistry* ; Rhizome/growth & development*

High-performance liquid chromatography(HPLC) was used to determine the content of three major components in Citri Reticulatae Semen(CRS), including limonin, nomilin, and obacunone. The chromaticity of the CRS sample during salt processing and stir-frying was measured using a color difference meter. Next, the relationship between the color and content of the salt-processed CRS sample was investigated through correlation analysis. By integrating the oil bath technique for processing simulation with HPLC, the changes in the relative content of nomilin and its transformation products were analyzed, with its structural transformation pattern during processing identified. Additionally, RAW264.7 cells were induced with lipopolysaccharides(LPSs) to establish an inflammatory model, and the anti-inflammatory activity of nomilin and its transformation product, namely obacunone was evaluated. The results indicated that as processing progressed, E~*ab and L~* values showed a downward trend; a~* values exhibited a slow increase over a certain period, followed by no significant changes, and b~* values remained stable with no significant changes over a certain period and then started to decrease. The limonin content remained barely unchanged; the nomilin content decreased, and the obacunone increased significantly. The changing trends in content and color parameters during salt-processing and stir-frying were basically consistent. The content of nomilin and obacunone was significantly correlated with the colorimetric values(L~*, a~*, b~*, and E~*ab), while limonin content showed no significant correlation with these values. By analyzing HPLC patterns of nomylin at different heating temperatures and time, it was found that under conditions of 200-250 ℃ for heating of 5-60 min, the content of nomilin significantly decreased, while the obacunone content increased pronouncedly. The in vitro anti-inflammatory activity results indicated that compared to the model group, the group with a high concentration of nomilin and the groups with varying concentrations of obacunone showed significantly reduced release of nitric oxide(NO)(P<0.01). When both were at the same concentration, obacunone showed better performance in inhibiting NO release. In this study, the obvious correlation between the color and content of major components during the processing of CRS samples was identified, and the dynamic patterns of quality change in CRS samples during processing were revealed. Additionally, the study revealed and confirmed the transformation of nomilin into obacunone during processing, with the in vitro anti-inflammatory activity of obacunone significantly greater than that of nomilin. These findings provided a scientific basis for CRS processing optimization, tablet quality control, and its clinical application.
Mice ; Animals ; Drugs, Chinese Herbal/pharmacology* ; RAW 264.7 Cells ; Limonins/chemistry* ; Chromatography, High Pressure Liquid ; Citrus/chemistry* ; Color ; Benzoxepins/chemistry* ; Anti-Inflammatory Agents/chemistry*

This study explored the potential therapeutic targets and mechanisms of Danggui Shaoyao San(DSS) in the prevention and treatment of Alzheimer's disease(AD) through transcriptomics and metabolomics, combined with animal experiments. Fifty male C57BL/6J mice, aged seven weeks, were randomly divided into the following five groups: control, model, positive drug, low-dose DSS, and high-dose DSS groups. After the intervention, the Morris water maze was used to assess learning and memory abilities of mice, and Nissl staining and hematoxylin-eosin(HE) staining were performed to observe pathological changes in the hippocampal tissue. Transcriptomics and metabolomics were employed to sequence brain tissue and identify differential metabolites, analyzing key genes and metabolites related to disease progression. Reverse transcription-quantitative polymerase chain reaction(RT-qPCR) was employed to validate the expression of key genes. The Morris water maze results indicated that DSS significantly improved learning and cognitive function in scopolamine(SCOP)-induced model mice, with the high-dose DSS group showing the best results. Pathological staining showed that DSS effectively reduced hippocampal neuronal damage, increased Nissl body numbers, and reduced nuclear pyknosis and neuronal loss. Transcriptomics identified seven key genes, including neurexin 1(Nrxn1) and sodium voltage-gated channel α subunit 1(Scn1a), and metabolomics revealed 113 differential metabolites, all of which were closely associated with synaptic function, oxidative stress, and metabolic regulation. RT-qPCR experiments confirmed that the expression of these seven key genes was consistent with the transcriptomics results. This study suggests that DSS significantly improves learning and memory in SCOP model mice and alleviates hippocampal neuronal pathological damage. The mechanisms likely involve the modulation of synaptic function, reduction of oxidative stress, and metabolic balance, with these seven key genes serving as important targets for DSS in the treatment of AD.
Animals ; Alzheimer Disease/genetics* ; Male ; Drugs, Chinese Herbal/administration & dosage* ; Mice ; Mice, Inbred C57BL ; Metabolomics ; Transcriptome/drug effects* ; Maze Learning/drug effects* ; Hippocampus/metabolism* ; Humans ; Disease Models, Animal ; Memory/drug effects*

Metabonomics and proteomics were employed to investigate the mechanism of Yuzhi Zhixue Granules in treating polycystic ovary syndrome with insulin resistance(PCOS-IR). The disease model was established by feeding a high-fat diet and gavage of letrozole solution and it was then treated with different doses of Yuzhi Zhixue Granules. The therapeutic effect of Yuzhi Zhixue Granules was evaluated based on the body mass, homeostasis model assessment of insulin resistance and insulin sensitivity index, serum levels of adipokines, and histopathological changes of rats. Metabolomics and proteomics were employed to find the action pathways of Yuzhi Zhixue Granules. The results showed that Yuzhi Zhixue Granules reduced the body mass, improved the insulin sensitivity and aromatase activity, improved the levels of leptin, adiponectin and other adipokines, and alleviated insulin resistance, histopathological changes, and metabolic disorders in PCOS-IR rats. Metabolomics results revealed 14 metabolites with altered levels in the ovarian tissue, which were closely related to glutathione metabolism and pyruvate metabolism. Proteomics results showed that the therapeutic effect of Yuzhi Zhixue Granules was mainly related to the adipokine, adenosine 5'-monophosphate(AMP)-activated protein kinase(AMPK), phosphatidylinositol 3-kinase/protein kinase B(PI3K/Akt), forkhead box protein O(FoxO), and mechanistic target of rapamycin(mTOR) signaling pathways. Western blot results showed that compared with the model group, Yuzhi Zhixue Granules treatment decreased the p-AMPK/AMPK and p-FoxO1/FoxO1 levels, increased the p-mTOR/mTOR level, and up-regulated the expression level of recombinant glucose transporter 4(GLUT4). Yuzhi Zhixue Granules can balance amino acid metabolism and pyruvate metabolism by regulating the AMPK/mTOR/FoxO/GLUT pathway to maintain the homeostasis of the ovarian environment and alleviate insulin resistance, thus treating PCOS-IR.
Animals ; Female ; Insulin Resistance ; Polycystic Ovary Syndrome/genetics* ; Drugs, Chinese Herbal/administration & dosage* ; Rats ; Metabolomics ; Proteomics ; Rats, Sprague-Dawley ; Humans ; Ovary/metabolism* ; Signal Transduction/drug effects*

The quality of traditional Chinese medicine(TCM) is a critical foundation for ensuring the stability of its efficacy, as well as the safety and effectiveness of its clinical use. The identification of critical quality attributes(CQAs) is one of the core components of TCM preparation quality control. This study focuses on Jianwei Xiaoshi Tablets and explores their CQAs related to property and flavor from the perspective of taste receptor proteins. Three taste receptor proteins, T1R2, T1R3, and TRPV1, were selected, and a biosensor based on high-electron-mobility transistor(HEMT) was constructed to detect the interactions between Jianwei Xiaoshi Tablets and taste receptor proteins. Simultaneously, liquid chromatography-mass spectrometry(LC-MS) technology was used to analyze the chemical composition of Jianwei Xiaoshi Tablets. In examining the interaction strength, the results indicated that the interaction between Jianwei Xiaoshi Tablets and TRPV1 protein was the strongest, followed by T1R3, with the interaction with T1R2 being relatively weaker. By combining biosensing technology with LC-MS, 16 chemical components were identified from Jianwei Xiaoshi Tablets, among which six were selected as CQAs for sweetness and seven for pungency. Further validation experiments demonstrated that CQAs such as hesperidin and hesperetin had strong interactions with their corresponding taste receptor proteins. Through the combined use of multiple technological approaches, this study successfully determined the property and flavor-related CQAs of Jianwei Xiaoshi Tablets. It provides novel ideas and approach for the identification of CQAs in TCM preparations and offers comprehensive theoretical support for TCM quality control, contributing to the improvement and development of TCM preparation quality control systems.
Drugs, Chinese Herbal/chemistry* ; Biosensing Techniques/methods* ; TRPV Cation Channels/chemistry* ; Tablets/chemistry* ; Receptors, G-Protein-Coupled/genetics* ; Quality Control ; Taste ; Humans ; Mass Spectrometry

OBJECTIVE: To explore clinical effect of bone cement-strengthened pedicle screw technique in the correction of stage Ⅲ asymptomatic Kümmell disease with kyphosis. METHODS: A retrospective analysis was conducted on clinical data of 40 asymptomatic stage Ⅲ Kümmell disease patients admitted between March 2019 and December 2021, including 15 males and 25 females, aged from 61 to 81 years old with an average of (67.4±5.2) years old;according to different surgical methods, they were divided into percutaneous kyphoplasty group (PKP) and reinforced screw group. There were 18 patients in PKP group, including 7 males and 11 females, aged from 61 to 78 years old with an average of (66.2±5.5) years old;the courses of disease ranged from 5 to 12 months with an average of (7.33±1.78) months;bone mineral density(BMD) T values ranged from -2.45 to -4.00 with an average of (-3.08±0.46);2 patients with T₈-T₉, 10 patients with T₁₀-T₁₂, and 6 patients with L₁-L₂;treated with PKP. There were 22 patients in reinforced screw group, including 8 males and 14 females, aged from 65 to 81 years old with an average of (68.5±3.8) years old;the courses of disease ranged from 4 to 15 months with an average of (7.86±2.73)months;bone mineral density(BMD) T values ranged from -2.40 to -4.50 with an average of (-3.18±0.54);3 patients with T₈-T₉, 12 patients with T₁₀-T₁₂, and 7 patients with L₁-L₂;treated with bone cement reinforced pedicle screw internal fixation combined with kyphoplasty. Cobb angle and anterior margin height of the injured vertebra were compared before operation, 3 d and 12 months after operation. Visual analogue scale (VAS) and Oswestry disability index (ODI) were compared between two groups before operation and 12 months after operation. The incidence of postoperative complications was compared between two groups. RESULTS: All patients were followed up, PKP group followed up for 11 to 14 months with an average of (11.97±0.96) months and 10 to 14 months with an average of (12.05±1.09) months in reinforced screw group;there was no significant difference between two groups (P>0.05). Postoperative Cobb angle at 3 days and 12 months in reinforced screw group were (7.34±2.26) ° and (18.86±1.96) °, while in PKP group were (18.88±1.89) ° and (23.28±1.90) °;there were statistical difference between two groups (P<0.05). The anterior margin height of the injured vertebra in reinforced screw group were (25.28±1.33) mm and (19.62±2.22) mm at 3 days and 12 months after operation, while in PKP group were (18.61±2.16) mm and(15.93±1.34) mm;there were statistical difference between two groups (P<0.05). Cobb angle and the anterior margin height of the injured vertebra were significantly improved at 3 days and 12 months after operation between two groups (P<0.05). Postoperative VAS and ODI at 12 months in PKP group were (2.00±0.69) score and (13.44±4.02)%, while in reinforced screw group were(1.91±0.61) score and (10.18±4.26)%;which were significantly lower than (6.89±0.76) score and (36.33±3.40)% in PKP group, (7.23±0.75) score and (37.09±3.73) % in reinforced screw group before operation. There were no difference in postoperative VAS between two groups at 12 months (P>0.05);postoperative ODI in reinforced screw group at 12 months was lower than that in PKP group(P<0.05). There was no significant difference in complications between two groups (χ²=0.071, P>0.05). CONCLUSION PKP and bone cement reinforced nail combined with PKP could improve kyphotic deformity and postoperative function, and relieve pain. The application of bone cement-reinforced nail fixation technology could provide a more stable support, more obvious functional recovery, lower the risk of re-collapse of the injured vertebra, and maintain the long-term stability of spine.
Humans ; Male ; Female ; Aged, 80 and over ; Kyphosis/surgery* ; Aged ; Bone Cements ; Middle Aged ; Retrospective Studies ; Pedicle Screws ; Spinal Fractures/surgery* ; Fracture Fixation, Internal/methods* ; Bone Screws ; Kyphoplasty

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome